Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1429035 > unrolled thread
| Started by | Tai Nguyen <ttnguyen@apm.com> |
|---|---|
| First post | 2016-06-22 20:10 +0200 |
| Last post | 2016-06-28 20:10 +0200 |
| Articles | 14 — 4 participants |
Back to article view | Back to linux.kernel
[PATCH v4 0/4] perf: Add APM X-Gene SoC Performance Monitoring Unit driver Tai Nguyen <ttnguyen@apm.com> - 2016-06-22 20:10 +0200
[PATCH v4 4/4] arm64: dts: apm: Add APM X-Gene SoC PMU DTS entries Tai Nguyen <ttnguyen@apm.com> - 2016-06-22 20:20 +0200
[PATCH v4 2/4] Documentation: Add documentation for APM X-Gene SoC PMU DTS binding Tai Nguyen <ttnguyen@apm.com> - 2016-06-22 20:20 +0200
[PATCH v4 1/4] MAINTAINERS: Add entry for APM X-Gene SoC PMU driver Tai Nguyen <ttnguyen@apm.com> - 2016-06-22 20:20 +0200
Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Mark Rutland <mark.rutland@arm.com> - 2016-06-23 16:40 +0200
Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Tai Tri Nguyen <ttnguyen@apm.com> - 2016-06-25 20:00 +0200
Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Mark Rutland <mark.rutland@arm.com> - 2016-06-27 18:10 +0200
Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Tai Tri Nguyen <ttnguyen@apm.com> - 2016-06-27 20:00 +0200
Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Mark Rutland <mark.rutland@arm.com> - 2016-06-28 13:30 +0200
Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Marc Zyngier <marc.zyngier@arm.com> - 2016-06-28 15:30 +0200
Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Mark Rutland <mark.rutland@arm.com> - 2016-06-28 16:20 +0200
Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Tai Tri Nguyen <ttnguyen@apm.com> - 2016-06-28 18:50 +0200
Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Mark Rutland <mark.rutland@arm.com> - 2016-06-28 19:00 +0200
Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Tai Tri Nguyen <ttnguyen@apm.com> - 2016-06-28 20:10 +0200
| From | Tai Nguyen <ttnguyen@apm.com> |
|---|---|
| Date | 2016-06-22 20:10 +0200 |
| Subject | [PATCH v4 0/4] perf: Add APM X-Gene SoC Performance Monitoring Unit driver |
| Message-ID | <rMUL7-6S9-9@gated-at.bofh.it> |
In addition to the X-Gene ARM CPU performance monitoring unit (PMU), there
are PMU for the SoC system devices such as L3 cache(s), I/O bridge(s),
memory controller bridges and memory. These PMU devices are loosely
architected to follow the same model as the PMU for ARM cores.
Signed-off-by: Tai Nguyen <ttnguyen@apm.com>
---
v4:
* Alphabetically sorting header files
* Remove dynamic allocation for PMU format and event attribute groups
Create shared constant attribute groups per each class
* Remove perf_sample_data as this perf driver doesn't support sampling
* Consistently use the PCP_PMU_V{1,2} defines
* Set affinity to make sure the overflow interrupt is handled by the
same assigned CPU
v3:
* Remove index property use in PMU device sub nodes
v2:
* Use bitmask for event asignned counter mask pmu_dev->cntr_assign_mask
* Remove unnecessary spinlocks in perf add/del operations
* Remove unnecessary condition checks
* Enforce CPU assignment to one CPU for perf operarations
* Set the task_ctx_nr to perf_invalid_context for perf driver
* Remove irrelevant pt_rregs
* Change perf sysfs attributes to be fixed instead of dynamic
* Fix checking for an ACPI companion device instead of EFI enable
* Add documentation for config/config1 fields format and perf tool example
---
Tai Nguyen (4):
MAINTAINERS: Add entry for APM X-Gene SoC PMU driver
Documentation: Add documentation for APM X-Gene SoC PMU DTS binding
perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver
arm64: dts: apm: Add APM X-Gene SoC PMU DTS entries
.../devicetree/bindings/perf/apm-xgene-pmu.txt | 112 ++
Documentation/perf/xgene-pmu.txt | 48 +
MAINTAINERS | 8 +
arch/arm64/boot/dts/apm/apm-storm.dtsi | 58 +
drivers/perf/Kconfig | 7 +
drivers/perf/Makefile | 1 +
drivers/perf/xgene_pmu.c | 1437 ++++++++++++++++++++
7 files changed, 1671 insertions(+)
create mode 100644 Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
create mode 100644 Documentation/perf/xgene-pmu.txt
create mode 100644 drivers/perf/xgene_pmu.c
--
1.9.1
[toc] | [next] | [standalone]
| From | Tai Nguyen <ttnguyen@apm.com> |
|---|---|
| Date | 2016-06-22 20:20 +0200 |
| Subject | [PATCH v4 4/4] arm64: dts: apm: Add APM X-Gene SoC PMU DTS entries |
| Message-ID | <rMUUN-6VW-5@gated-at.bofh.it> |
| In reply to | #1429035 |
Signed-off-by: Tai Nguyen <ttnguyen@apm.com>
---
arch/arm64/boot/dts/apm/apm-storm.dtsi | 58 ++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index fe30f76..62806e0 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -566,6 +566,64 @@
};
};
+ pmu: pmu@78810000 {
+ compatible = "apm,xgene-pmu-v2";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ regmap-csw = <&csw>;
+ regmap-mcba = <&mcba>;
+ regmap-mcbb = <&mcbb>;
+ reg = <0x0 0x78810000 0x0 0x1000>;
+ interrupts = <0x0 0x22 0x4>;
+
+ pmul3c@7e610000 {
+ compatible = "apm,xgene-pmu-l3c";
+ reg = <0x0 0x7e610000 0x0 0x1000>;
+ };
+
+ pmuiob@7e940000 {
+ compatible = "apm,xgene-pmu-iob";
+ reg = <0x0 0x7e940000 0x0 0x1000>;
+ };
+
+ pmucmcb@7e710000 {
+ compatible = "apm,xgene-pmu-mcb";
+ reg = <0x0 0x7e710000 0x0 0x1000>;
+ enable-bit-index = <0>;
+ };
+
+ pmucmcb@7e730000 {
+ compatible = "apm,xgene-pmu-mcb";
+ reg = <0x0 0x7e730000 0x0 0x1000>;
+ enable-bit-index = <1>;
+ };
+
+ pmucmc@7e810000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e810000 0x0 0x1000>;
+ enable-bit-index = <0>;
+ };
+
+ pmucmc@7e850000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e850000 0x0 0x1000>;
+ enable-bit-index = <1>;
+ };
+
+ pmucmc@7e890000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e890000 0x0 0x1000>;
+ enable-bit-index = <2>;
+ };
+
+ pmucmc@7e8d0000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e8d0000 0x0 0x1000>;
+ enable-bit-index = <3>;
+ };
+ };
+
pcie0: pcie@1f2b0000 {
status = "disabled";
device_type = "pci";
--
1.9.1
[toc] | [prev] | [next] | [standalone]
| From | Tai Nguyen <ttnguyen@apm.com> |
|---|---|
| Date | 2016-06-22 20:20 +0200 |
| Subject | [PATCH v4 2/4] Documentation: Add documentation for APM X-Gene SoC PMU DTS binding |
| Message-ID | <rMUUO-6VW-15@gated-at.bofh.it> |
| In reply to | #1429035 |
Signed-off-by: Tai Nguyen <ttnguyen@apm.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/perf/apm-xgene-pmu.txt | 112 +++++++++++++++++++++
1 file changed, 112 insertions(+)
create mode 100644 Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
diff --git a/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt b/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
new file mode 100644
index 0000000..afb11cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
@@ -0,0 +1,112 @@
+* APM X-Gene SoC PMU bindings
+
+This is APM X-Gene SoC PMU (Performance Monitoring Unit) module.
+The following PMU devices are supported:
+
+ L3C - L3 cache controller
+ IOB - IO bridge
+ MCB - Memory controller bridge
+ MC - Memory controller
+
+The following section describes the SoC PMU DT node binding.
+
+Required properties:
+- compatible : Shall be "apm,xgene-pmu" for revision 1 or
+ "apm,xgene-pmu-v2" for revision 2.
+- regmap-csw : Regmap of the CPU switch fabric (CSW) resource.
+- regmap-mcba : Regmap of the MCB-A (memory bridge) resource.
+- regmap-mcbb : Regmap of the MCB-B (memory bridge) resource.
+- reg : First resource shall be the CPU bus PMU resource.
+- interrupts : Interrupt-specifier for PMU IRQ.
+
+Required properties for L3C subnode:
+- compatible : Shall be "apm,xgene-pmu-l3c".
+- reg : First resource shall be the L3C PMU resource.
+
+Required properties for IOB subnode:
+- compatible : Shall be "apm,xgene-pmu-iob".
+- reg : First resource shall be the IOB PMU resource.
+
+Required properties for MCB subnode:
+- compatible : Shall be "apm,xgene-pmu-mcb".
+- reg : First resource shall be the MCB PMU resource.
+- enable-bit-index : The bit indicates if the according MCB is enabled.
+
+Required properties for MC subnode:
+- compatible : Shall be "apm,xgene-pmu-mc".
+- reg : First resource shall be the MC PMU resource.
+- enable-bit-index : The bit indicates if the according MC is enabled.
+
+Example:
+ csw: csw@7e200000 {
+ compatible = "apm,xgene-csw", "syscon";
+ reg = <0x0 0x7e200000 0x0 0x1000>;
+ };
+
+ mcba: mcba@7e700000 {
+ compatible = "apm,xgene-mcb", "syscon";
+ reg = <0x0 0x7e700000 0x0 0x1000>;
+ };
+
+ mcbb: mcbb@7e720000 {
+ compatible = "apm,xgene-mcb", "syscon";
+ reg = <0x0 0x7e720000 0x0 0x1000>;
+ };
+
+ pmu: pmu@78810000 {
+ compatible = "apm,xgene-pmu-v2";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ regmap-csw = <&csw>;
+ regmap-mcba = <&mcba>;
+ regmap-mcbb = <&mcbb>;
+ reg = <0x0 0x78810000 0x0 0x1000>;
+ interrupts = <0x0 0x22 0x4>;
+
+ pmul3c@7e610000 {
+ compatible = "apm,xgene-pmu-l3c";
+ reg = <0x0 0x7e610000 0x0 0x1000>;
+ };
+
+ pmuiob@7e940000 {
+ compatible = "apm,xgene-pmu-iob";
+ reg = <0x0 0x7e940000 0x0 0x1000>;
+ };
+
+ pmucmcb@7e710000 {
+ compatible = "apm,xgene-pmu-mcb";
+ reg = <0x0 0x7e710000 0x0 0x1000>;
+ enable-bit-index = <0>;
+ };
+
+ pmucmcb@7e730000 {
+ compatible = "apm,xgene-pmu-mcb";
+ reg = <0x0 0x7e730000 0x0 0x1000>;
+ enable-bit-index = <1>;
+ };
+
+ pmucmc@7e810000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e810000 0x0 0x1000>;
+ enable-bit-index = <0>;
+ };
+
+ pmucmc@7e850000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e850000 0x0 0x1000>;
+ enable-bit-index = <1>;
+ };
+
+ pmucmc@7e890000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e890000 0x0 0x1000>;
+ enable-bit-index = <2>;
+ };
+
+ pmucmc@7e8d0000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e8d0000 0x0 0x1000>;
+ enable-bit-index = <3>;
+ };
+ };
--
1.9.1
[toc] | [prev] | [next] | [standalone]
| From | Tai Nguyen <ttnguyen@apm.com> |
|---|---|
| Date | 2016-06-22 20:20 +0200 |
| Subject | [PATCH v4 1/4] MAINTAINERS: Add entry for APM X-Gene SoC PMU driver |
| Message-ID | <rMUUO-6VW-23@gated-at.bofh.it> |
| In reply to | #1429035 |
Signed-off-by: Tai Nguyen <ttnguyen@apm.com> --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 4978dc1..3bd4143 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8593,6 +8593,14 @@ L: linux-scsi@vger.kernel.org S: Supported F: drivers/scsi/pm8001/ +PMU-XGENE +APPLIED MICRO (APM) X-GENE SOC PMU +M: Tai Nguyen <ttnguyen@apm.com> +S: Supported +F: drivers/perf/xgene_pmu.c +F: Documentation/perf/xgene-pmu.txt +F: Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt + POSIX CLOCKS and TIMERS M: Thomas Gleixner <tglx@linutronix.de> L: linux-kernel@vger.kernel.org -- 1.9.1
[toc] | [prev] | [next] | [standalone]
| From | Mark Rutland <mark.rutland@arm.com> |
|---|---|
| Date | 2016-06-23 16:40 +0200 |
| Subject | Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver |
| Message-ID | <rNdXr-2Tn-3@gated-at.bofh.it> |
| In reply to | #1429035 |
Hi,
On Wed, Jun 22, 2016 at 11:06:58AM -0700, Tai Nguyen wrote:
> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> index 04e2653..be597dd 100644
> --- a/drivers/perf/Kconfig
> +++ b/drivers/perf/Kconfig
> @@ -12,4 +12,11 @@ config ARM_PMU
> Say y if you want to use CPU performance monitors on ARM-based
> systems.
>
> +config XGENE_PMU
> + depends on PERF_EVENTS && ARCH_XGENE
> + bool "APM SoC X-Gene PMU"
Nit: make this "APM X-Gene SoC PMU"
> + default n
> + help
> + Say y if you want to use APM X-Gene SOC performance monitors.
Nit: s/SOC/SoC/ for consistency.
[...]
> +#include <linux/acpi.h>
> +#include <linux/clk.h>
> +#include <linux/cpumask.h>
> +#include <linux/efi.h>
Looking at the driver, I don't see any reason you need linux/efi.h, and
I can't imagine why this driver would care about EFI. Please drop that
include.
The other includes look fine.
> +#define PMU_MAX_COUNTERS 4
> +#define PMU_CNT_MAX_VAL 0x100000000ULL
I was a little confused by this. Please s/VAL/PERIOD/ (as the maximum
*value* will be 0xFFFFFFFF).
> +#define _GET_CNTR(ev) (ev->hw.extra_reg.reg)
> +#define _GET_EVENTID(ev) (ev->hw.config & 0xFFULL)
> +#define _GET_AGENTID(ev) (ev->hw.extra_reg.config & 0xFFFFFFFFULL)
> +#define _GET_AGENT1ID(ev) ((ev->hw.extra_reg.config >> 32) & 0xFFFFFFFFULL)
I don't think you need to use the extra_reg fields for this. It's a
little bit confusing to use them, as the extra_reg (and branch_reg)
fields are for separately allocated PMU state.
_GET_CNTR can use hw_perf_event::idx, and _GET_AGENT*_ID can use
config_base.
> +struct xgene_pmu_dev {
> + struct hw_pmu_info *inf;
> + struct xgene_pmu *parent;
> + struct pmu pmu;
> + u8 max_counters;
> + DECLARE_BITMAP(cntr_assign_mask, PMU_MAX_COUNTERS);
> + raw_spinlock_t lock;
> + u64 max_period;
> + const struct attribute_group **attr_groups;
> + struct perf_event *pmu_counter_event[4];
> +};
I believe that the 4 should be PMU_MAX_COUNTERS, to match the bitmap.
[...]
> +#define XGENE_PMU_FORMAT_ATTR(_name, _config) \
> + struct dev_ext_attribute pmu_format_attr_##_name = \
> + { __ATTR(_name, S_IRUGO, xgene_pmu_format_show, NULL), _config }
> +
> +static XGENE_PMU_FORMAT_ATTR(l3c_eventid, "config:0-7");
> +static XGENE_PMU_FORMAT_ATTR(l3c_agentid, "config1:0-9");
> +static XGENE_PMU_FORMAT_ATTR(iob_eventid, "config:0-7");
> +static XGENE_PMU_FORMAT_ATTR(iob_agentid, "config1:0-63");
> +static XGENE_PMU_FORMAT_ATTR(mcb_eventid, "config:0-5");
> +static XGENE_PMU_FORMAT_ATTR(mcb_agentid, "config1:0-9");
> +static XGENE_PMU_FORMAT_ATTR(mc_eventid, "config:0-28");
> +
> +static const struct attribute *l3c_pmu_format_attrs[] = {
> + &pmu_format_attr_l3c_eventid.attr.attr,
> + &pmu_format_attr_l3c_agentid.attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute *iob_pmu_format_attrs[] = {
> + &pmu_format_attr_iob_eventid.attr.attr,
> + &pmu_format_attr_iob_agentid.attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute *mcb_pmu_format_attrs[] = {
> + &pmu_format_attr_mcb_eventid.attr.attr,
> + &pmu_format_attr_mcb_agentid.attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute *mc_pmu_format_attrs[] = {
> + &pmu_format_attr_mc_eventid.attr.attr,
> + NULL,
> +};
As mentioned before, you can use compound literals for these and avoid
the redundancy. There is a trick to this, which I didn't explain last
time. You need to update XGENE_PMU_FORMAT_ATTR to match what we do in
the arm-cci driver for CCI_EXT_ATTR_ENTRY, using a single element array
to allow the compiler to statically allocate an anonymous struct and
generate a pointer to a sub-field at compile time. e.g.
#define XGENE_PMU_FORMAT_ATTR(_name, _config) \
&((struct dev_ext_attribute[]) { \
{ __ATTR(_name, S_IRUGO, xgene_pmu_format_show, NULL), _config } \
})[0].attr.attr
static struct attribute *l3c_pmu_format_attrs[] = {
XGENE_PMU_FORMAT_ATTR(l3c_eventid, "config:0-7"),
XGENE_PMU_FORMAT_ATTR(l3c_agentid, "config1:0-9"),
NULL,
};
> +static const struct attribute_group l3c_pmu_format_attr_group = {
> + .name = "format",
> + .attrs = (struct attribute **) l3c_pmu_format_attrs,
> +};
I see based on that suspicious cast that attribute_group::attrs isn't
const, and so we're throwing away the constness of
xgene_pmu_cpumask_attrs here. I didn't realise that when I suggested
making the structures const; sorry for the bad advice in the last round
of review.
Forcefully casting away const isn't a great idea. For the timebeing,
please drop any casts which throw away const, and remove the instances
of const that made those necessary.
> +#define XGENE_PMU_EVENT_ATTR(_name) \
> + __ATTR(_name, S_IRUGO, xgene_pmu_event_show, NULL)
> +#define XGENE_PMU_EVENT(_name, _config) { \
> + .attr = XGENE_PMU_EVENT_ATTR(_name), \
> + .config = _config, }
> +
> +static const struct xgene_pmu_event l3c_pmu_events[] = {
> + XGENE_PMU_EVENT(cycle-count, 0x00),
> + XGENE_PMU_EVENT(cycle-count-div-64, 0x01),
> + XGENE_PMU_EVENT(read-hit, 0x02),
> + XGENE_PMU_EVENT(read-miss, 0x03),
> + XGENE_PMU_EVENT(write-need-replacement, 0x06),
> + XGENE_PMU_EVENT(write-not-need-replacement, 0x07),
> + XGENE_PMU_EVENT(tq-full, 0x08),
> + XGENE_PMU_EVENT(ackq-full, 0x09),
> + XGENE_PMU_EVENT(wdb-full, 0x0a),
> + XGENE_PMU_EVENT(bank-fifo-full, 0x0b),
> + XGENE_PMU_EVENT(odb-full, 0x0c),
> + XGENE_PMU_EVENT(wbq-full, 0x0d),
> + XGENE_PMU_EVENT(bank-conflict-fifo-issue, 0x0e),
> + XGENE_PMU_EVENT(bank-fifo-issue, 0x0f),
> +};
[...]
> +/* Populated in xgene_pmu_probe */
> +static struct attribute *l3c_pmu_events_attrs[ARRAY_SIZE(l3c_pmu_events) + 1];
> +static struct attribute *iob_pmu_events_attrs[ARRAY_SIZE(iob_pmu_events) + 1];
> +static struct attribute *mcb_pmu_events_attrs[ARRAY_SIZE(mcb_pmu_events) + 1];
> +static struct attribute *mc_pmu_events_attrs[ARRAY_SIZE(mc_pmu_events) + 1];
As with the other attributes above, please use the CCI_EXT_ATTR_ENTRY
trick to initialise these at compile time, rather than initialising this
in xgene_pmu_probe. e.g.
#define XGENE_PMU_EVENT_ATTR(_name, _config) \
&((struct xgene_pmu_event[]) {{ \
.attr = __ATTR(_name, S_IRUGO, xgene_pmu_event_show, NULL), \
.config = _config, \
}})[0].attr.attr
static struct attribute *l3c_pmu_events_attrs[] = {
XGENE_PMU_EVENT_ATTR(cycle-count, 0x00),
XGENE_PMU_EVENT_ATTR(cycle-count-div-64, 0x01),
XGENE_PMU_EVENT_ATTR(read-hit, 0x02),
XGENE_PMU_EVENT_ATTR(read-miss, 0x03),
XGENE_PMU_EVENT_ATTR(write-need-replacement, 0x06),
XGENE_PMU_EVENT_ATTR(write-not-need-replacement, 0x07),
XGENE_PMU_EVENT_ATTR(tq-full, 0x08),
XGENE_PMU_EVENT_ATTR(ackq-full, 0x09),
XGENE_PMU_EVENT_ATTR(wdb-full, 0x0a),
XGENE_PMU_EVENT_ATTR(bank-fifo-full, 0x0b),
XGENE_PMU_EVENT_ATTR(odb-full, 0x0c),
XGENE_PMU_EVENT_ATTR(wbq-full, 0x0d),
XGENE_PMU_EVENT_ATTR(bank-conflict-fifo-issue, 0x0e),
XGENE_PMU_EVENT_ATTR(bank-fifo-issue, 0x0f),
NULL,
};
> + /*
> + * Each bit of the config1 field represents an agent from which the
> + * request of the event come. The event is counted only if it's caused
> + * by a request of an agent has the bit set.
> + * By default, the event is counted for all agents.
> + */
> + if (config1)
> + hwc->extra_reg.config = config1;
> + else
> + hwc->extra_reg.config = 0xFFFFFFFFFFFFFFFFULL;
Previously I asked you to invert the meaning of this, such that the
default would be to match all masters.
I understand that in HW, you need to write 0xFFFFFFFFFFFFFFFF to match
all masters, as you mentioned in your last reply. The simple way to
handle that is to bitwise invert the value when writing it to HW , i.e.
write ~(hwc->extra_reg.config). Please do so, updating the documentation
appropriately.
[...]
> +static int xgene_perf_add(struct perf_event *event, int flags)
> +{
> + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
> + struct hw_perf_event *hw = &event->hw;
> +
> + event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
Please either use event->hw.field or hw->field consistently.
> +
> + /* Allocate an event counter */
> + hw->idx = get_next_avail_cntr(pmu_dev);
> + if (hw->idx < 0)
> + return -EAGAIN;
> +
> + event->hw.extra_reg.reg = (u16) hw->idx;
That cast shouldn't be necessary, given idx will be between 0 and 4, and
reg is an unsigned int.
Given this is already in hw->idx, what is the benefit of duplicating this?
You can get rid of this line if you change _GET_CNTR to return
ev->hw.idx.
> +
> + if (flags & PERF_EF_START)
> + xgene_perf_start(event, PERF_EF_RELOAD);
> +
> + /* Update counter event pointer for Interrupt handler */
> + pmu_dev->pmu_counter_event[hw->idx] = event;
Are interrupts guaranteed to be disabled here, or should these be
swapped? Otherwise, what happens if an interrupt comes in before we
updated this pointer?
> +
> + return 0;
> +}
> +
> +static void xgene_perf_del(struct perf_event *event, int flags)
> +{
> + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
> +
> + xgene_perf_stop(event, PERF_EF_UPDATE);
> +
> + /* clear the assigned counter */
> + clear_avail_cntr(pmu_dev, _GET_CNTR(event));
> +
> + perf_event_update_userpage(event);
> +}
It would be a good idea to remove the dangling pmu_dev->pmu_counter_event
pointer, even if not strictly required.
> +
> +static u64 xgene_perf_event_update(struct perf_event *event)
> +{
> + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
> + struct hw_perf_event *hwc = &event->hw;
> + u64 delta, prev_raw_count, new_raw_count;
> +
> +again:
> + prev_raw_count = local64_read(&hwc->prev_count);
> + new_raw_count = pmu_dev->max_period;
I don't understand this. Why are we not reading the counter here?
This means that the irq handler won't be reading the counter, which
means we're throwing away events, and I suspect other cases are broken
too.
> +
> + if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
> + new_raw_count) != prev_raw_count)
> + goto again;
> +
> + delta = (new_raw_count - prev_raw_count) & pmu_dev->max_period;
> +
> + local64_add(delta, &event->count);
> + local64_sub(delta, &hwc->period_left);
Given we aren't sampling, does the period left matter? It looks like
drivers are inconsistent w.r.t. this, and I'm not immediately sure :(
> +
> + return new_raw_count;
> +}
> +
> +static int xgene_perf_event_set_period(struct perf_event *event)
> +{
> + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
> + struct hw_perf_event *hwc = &event->hw;
> + s64 left = local64_read(&hwc->period_left);
> + s64 period = hwc->sample_period;
> + int ret = 0;
> +
> + if (unlikely(left <= -period)) {
> + left = period;
> + local64_set(&hwc->period_left, left);
> + hwc->last_period = period;
> + ret = 1;
> + }
> +
> + if (unlikely(left <= 0)) {
> + left += period;
> + local64_set(&hwc->period_left, left);
> + hwc->last_period = period;
> + ret = 1;
> + }
> +
> + /*
> + * Limit the maximum period to prevent the counter value
> + * from overtaking the one we are about to program. In
> + * effect we are reducing max_period to account for
> + * interrupt latency (and we are being very conservative).
> + */
> + if (left > (pmu_dev->max_period >> 1))
> + left = pmu_dev->max_period >> 1;
> +
> + local64_set(&hwc->prev_count, (u64) -left);
> +
> + xgene_pmu_write_counter(pmu_dev, hwc->idx, (u64)(-left) & 0xffffffff);
> +
> + perf_event_update_userpage(event);
> +
> + return ret;
> +}
Given the lack of sampling, I suspect that you can simply follow what
the arm-cci driver does, and always use exactly half a max period.
[...]
> +static irqreturn_t _xgene_pmu_isr(int irq, struct xgene_pmu_dev *pmu_dev)
> +{
> + struct xgene_pmu *xgene_pmu = pmu_dev->parent;
> + u32 pmovsr;
> + int idx;
> +
> + pmovsr = readl(pmu_dev->inf->csr + PMU_PMOVSR) & PMU_OVERFLOW_MASK;
> + /* Clear interrupt flag */
> + if (xgene_pmu->version == PCP_PMU_V1)
> + writel(0x0, pmu_dev->inf->csr + PMU_PMOVSR);
> + else
> + writel(pmovsr, pmu_dev->inf->csr + PMU_PMOVSR);
> +
> + if (!pmovsr)
> + return IRQ_NONE;
> +
> + for (idx = 0; idx < PMU_MAX_COUNTERS; idx++) {
> + struct perf_event *event = pmu_dev->pmu_counter_event[idx];
> + int overflowed = pmovsr & BIT(idx);
> +
> + /* Ignore if we don't have an event. */
> + if (!event || !overflowed)
> + continue;
> + xgene_perf_event_update(event);
> + xgene_perf_event_set_period(event);
As I mentioned earlier, the lack of a counter read in
xgene_perf_event_update() means this is broken.
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t xgene_pmu_isr(int irq, void *dev_id)
> +{
> + struct xgene_pmu_dev_ctx *ctx, *temp_ctx;
> + struct xgene_pmu *xgene_pmu = dev_id;
> + u32 val;
> +
> + xgene_pmu_mask_int(xgene_pmu);
Why do you need to mask the IRQ? This handler is called in hard IRQ
context.
> +
> + /* Get Interrupt PMU source */
> + val = readl(xgene_pmu->pcppmu_csr + PCPPMU_INTSTATUS_REG)
> + & PCPPMU_INTMASK;
I don't think you need the mask here, given you only test masks below.
I think that can be removed.
Otherwise, please leave the '&' dangling on the first line.
> + if (val & PCPPMU_INT_MCU) {
> + list_for_each_entry_safe(ctx, temp_ctx,
> + &xgene_pmu->mcpmus, next) {
> + _xgene_pmu_isr(irq, ctx->pmu_dev);
> + }
> + }
> + if (val & PCPPMU_INT_MCB) {
> + list_for_each_entry_safe(ctx, temp_ctx,
> + &xgene_pmu->mcbpmus, next) {
> + _xgene_pmu_isr(irq, ctx->pmu_dev);
> + }
> + }
> + if (val & PCPPMU_INT_L3C) {
> + list_for_each_entry_safe(ctx, temp_ctx,
> + &xgene_pmu->l3cpmus, next) {
> + _xgene_pmu_isr(irq, ctx->pmu_dev);
> + }
> + }
> + if (val & PCPPMU_INT_IOB) {
> + list_for_each_entry_safe(ctx, temp_ctx,
> + &xgene_pmu->iobpmus, next) {
> + _xgene_pmu_isr(irq, ctx->pmu_dev);
> + }
> + }
> +
> + xgene_pmu_unmask_int(xgene_pmu);
> +
> + return IRQ_HANDLED;
> +}
[...]
> + /* Populate PMU event atrribute arrays */
> + for (i = 0; i < ARRAY_SIZE(l3c_pmu_events); i++)
> + l3c_pmu_events_attrs[i] =
> + (struct attribute *) &l3c_pmu_events[i].attr.attr;
> + for (i = 0; i < ARRAY_SIZE(iob_pmu_events); i++)
> + iob_pmu_events_attrs[i] =
> + (struct attribute *) &iob_pmu_events[i].attr.attr;
> + for (i = 0; i < ARRAY_SIZE(mcb_pmu_events); i++)
> + mcb_pmu_events_attrs[i] =
> + (struct attribute *) &mcb_pmu_events[i].attr.attr;
> + for (i = 0; i < ARRAY_SIZE(mc_pmu_events); i++)
> + mc_pmu_events_attrs[i] =
> + (struct attribute *) &mc_pmu_events[i].attr.attr;
As mentioend earlier, you can do this at compile time. Please do.
Thanks,
Mark.
[toc] | [prev] | [next] | [standalone]
| From | Tai Tri Nguyen <ttnguyen@apm.com> |
|---|---|
| Date | 2016-06-25 20:00 +0200 |
| Subject | Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver |
| Message-ID | <rO026-8sG-19@gated-at.bofh.it> |
| In reply to | #1429897 |
Hi Mark,
On Thu, Jun 23, 2016 at 7:32 AM, Mark Rutland <mark.rutland@arm.com> wrote:
>
> Hi,
>
> On Wed, Jun 22, 2016 at 11:06:58AM -0700, Tai Nguyen wrote:
> > diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> > index 04e2653..be597dd 100644
> > --- a/drivers/perf/Kconfig
> > +++ b/drivers/perf/Kconfig
> > @@ -12,4 +12,11 @@ config ARM_PMU
> > Say y if you want to use CPU performance monitors on ARM-based
> > systems.
> >
> > +config XGENE_PMU
> > + depends on PERF_EVENTS && ARCH_XGENE
> > + bool "APM SoC X-Gene PMU"
>
> Nit: make this "APM X-Gene SoC PMU"
Okay
>
>
> > + default n
> > + help
> > + Say y if you want to use APM X-Gene SOC performance monitors.
>
> Nit: s/SOC/SoC/ for consistency.
>
Okay
> [...]
>
> > +#include <linux/acpi.h>
> > +#include <linux/clk.h>
> > +#include <linux/cpumask.h>
> > +#include <linux/efi.h>
>
> Looking at the driver, I don't see any reason you need linux/efi.h, and
> I can't imagine why this driver would care about EFI. Please drop that
> include.
>
> The other includes look fine.
You're right. I'll drop it.
>
> > +#define PMU_MAX_COUNTERS 4
> > +#define PMU_CNT_MAX_VAL 0x100000000ULL
>
> I was a little confused by this. Please s/VAL/PERIOD/ (as the maximum
> *value* will be 0xFFFFFFFF).
Okay, I'll change it
>
> > +#define _GET_CNTR(ev) (ev->hw.extra_reg.reg)
> > +#define _GET_EVENTID(ev) (ev->hw.config & 0xFFULL)
> > +#define _GET_AGENTID(ev) (ev->hw.extra_reg.config & 0xFFFFFFFFULL)
> > +#define _GET_AGENT1ID(ev) ((ev->hw.extra_reg.config >> 32) & 0xFFFFFFFFULL)
>
> I don't think you need to use the extra_reg fields for this. It's a
> little bit confusing to use them, as the extra_reg (and branch_reg)
> fields are for separately allocated PMU state.
>
> _GET_CNTR can use hw_perf_event::idx, and _GET_AGENT*_ID can use
> config_base.
I need a 64 bit field for GET_AGENT*ID. The config_base is only 32 bit.
Can you please suggest another field?
For _GET_CNTR, yes I'll use hw::idx.
>
> > +struct xgene_pmu_dev {
> > + struct hw_pmu_info *inf;
> > + struct xgene_pmu *parent;
> > + struct pmu pmu;
> > + u8 max_counters;
> > + DECLARE_BITMAP(cntr_assign_mask, PMU_MAX_COUNTERS);
> > + raw_spinlock_t lock;
> > + u64 max_period;
> > + const struct attribute_group **attr_groups;
> > + struct perf_event *pmu_counter_event[4];
> > +};
>
> I believe that the 4 should be PMU_MAX_COUNTERS, to match the bitmap.
>
Will fix it.
> [...]
>
> > +#define XGENE_PMU_FORMAT_ATTR(_name, _config) \
> > + struct dev_ext_attribute pmu_format_attr_##_name = \
> > + { __ATTR(_name, S_IRUGO, xgene_pmu_format_show, NULL), _config }
> > +
> > +static XGENE_PMU_FORMAT_ATTR(l3c_eventid, "config:0-7");
> > +static XGENE_PMU_FORMAT_ATTR(l3c_agentid, "config1:0-9");
> > +static XGENE_PMU_FORMAT_ATTR(iob_eventid, "config:0-7");
> > +static XGENE_PMU_FORMAT_ATTR(iob_agentid, "config1:0-63");
> > +static XGENE_PMU_FORMAT_ATTR(mcb_eventid, "config:0-5");
> > +static XGENE_PMU_FORMAT_ATTR(mcb_agentid, "config1:0-9");
> > +static XGENE_PMU_FORMAT_ATTR(mc_eventid, "config:0-28");
> > +
> > +static const struct attribute *l3c_pmu_format_attrs[] = {
> > + &pmu_format_attr_l3c_eventid.attr.attr,
> > + &pmu_format_attr_l3c_agentid.attr.attr,
> > + NULL,
> > +};
> > +
> > +static const struct attribute *iob_pmu_format_attrs[] = {
> > + &pmu_format_attr_iob_eventid.attr.attr,
> > + &pmu_format_attr_iob_agentid.attr.attr,
> > + NULL,
> > +};
> > +
> > +static const struct attribute *mcb_pmu_format_attrs[] = {
> > + &pmu_format_attr_mcb_eventid.attr.attr,
> > + &pmu_format_attr_mcb_agentid.attr.attr,
> > + NULL,
> > +};
> > +
> > +static const struct attribute *mc_pmu_format_attrs[] = {
> > + &pmu_format_attr_mc_eventid.attr.attr,
> > + NULL,
> > +};
>
> As mentioned before, you can use compound literals for these and avoid
> the redundancy. There is a trick to this, which I didn't explain last
> time. You need to update XGENE_PMU_FORMAT_ATTR to match what we do in
> the arm-cci driver for CCI_EXT_ATTR_ENTRY, using a single element array
> to allow the compiler to statically allocate an anonymous struct and
> generate a pointer to a sub-field at compile time. e.g.
>
> #define XGENE_PMU_FORMAT_ATTR(_name, _config) \
> &((struct dev_ext_attribute[]) { \
> { __ATTR(_name, S_IRUGO, xgene_pmu_format_show, NULL), _config } \
> })[0].attr.attr
>
> static struct attribute *l3c_pmu_format_attrs[] = {
> XGENE_PMU_FORMAT_ATTR(l3c_eventid, "config:0-7"),
> XGENE_PMU_FORMAT_ATTR(l3c_agentid, "config1:0-9"),
> NULL,
> };
Thanks, I'll make change as per your suggestion.
>
> > +static const struct attribute_group l3c_pmu_format_attr_group = {
> > + .name = "format",
> > + .attrs = (struct attribute **) l3c_pmu_format_attrs,
> > +};
>
> I see based on that suspicious cast that attribute_group::attrs isn't
> const, and so we're throwing away the constness of
> xgene_pmu_cpumask_attrs here. I didn't realise that when I suggested
> making the structures const; sorry for the bad advice in the last round
> of review.
>
> Forcefully casting away const isn't a great idea. For the timebeing,
> please drop any casts which throw away const, and remove the instances
> of const that made those necessary.
>
Yes, I agree.
> > +#define XGENE_PMU_EVENT_ATTR(_name) \
> > + __ATTR(_name, S_IRUGO, xgene_pmu_event_show, NULL)
> > +#define XGENE_PMU_EVENT(_name, _config) { \
> > + .attr = XGENE_PMU_EVENT_ATTR(_name), \
> > + .config = _config, }
> > +
> > +static const struct xgene_pmu_event l3c_pmu_events[] = {
> > + XGENE_PMU_EVENT(cycle-count, 0x00),
> > + XGENE_PMU_EVENT(cycle-count-div-64, 0x01),
> > + XGENE_PMU_EVENT(read-hit, 0x02),
> > + XGENE_PMU_EVENT(read-miss, 0x03),
> > + XGENE_PMU_EVENT(write-need-replacement, 0x06),
> > + XGENE_PMU_EVENT(write-not-need-replacement, 0x07),
> > + XGENE_PMU_EVENT(tq-full, 0x08),
> > + XGENE_PMU_EVENT(ackq-full, 0x09),
> > + XGENE_PMU_EVENT(wdb-full, 0x0a),
> > + XGENE_PMU_EVENT(bank-fifo-full, 0x0b),
> > + XGENE_PMU_EVENT(odb-full, 0x0c),
> > + XGENE_PMU_EVENT(wbq-full, 0x0d),
> > + XGENE_PMU_EVENT(bank-conflict-fifo-issue, 0x0e),
> > + XGENE_PMU_EVENT(bank-fifo-issue, 0x0f),
> > +};
>
> [...]
>
> > +/* Populated in xgene_pmu_probe */
> > +static struct attribute *l3c_pmu_events_attrs[ARRAY_SIZE(l3c_pmu_events) + 1];
> > +static struct attribute *iob_pmu_events_attrs[ARRAY_SIZE(iob_pmu_events) + 1];
> > +static struct attribute *mcb_pmu_events_attrs[ARRAY_SIZE(mcb_pmu_events) + 1];
> > +static struct attribute *mc_pmu_events_attrs[ARRAY_SIZE(mc_pmu_events) + 1];
>
> As with the other attributes above, please use the CCI_EXT_ATTR_ENTRY
> trick to initialise these at compile time, rather than initialising this
> in xgene_pmu_probe. e.g.
>
> #define XGENE_PMU_EVENT_ATTR(_name, _config) \
> &((struct xgene_pmu_event[]) {{ \
> .attr = __ATTR(_name, S_IRUGO, xgene_pmu_event_show, NULL), \
> .config = _config, \
> }})[0].attr.attr
>
> static struct attribute *l3c_pmu_events_attrs[] = {
> XGENE_PMU_EVENT_ATTR(cycle-count, 0x00),
> XGENE_PMU_EVENT_ATTR(cycle-count-div-64, 0x01),
> XGENE_PMU_EVENT_ATTR(read-hit, 0x02),
> XGENE_PMU_EVENT_ATTR(read-miss, 0x03),
> XGENE_PMU_EVENT_ATTR(write-need-replacement, 0x06),
> XGENE_PMU_EVENT_ATTR(write-not-need-replacement, 0x07),
> XGENE_PMU_EVENT_ATTR(tq-full, 0x08),
> XGENE_PMU_EVENT_ATTR(ackq-full, 0x09),
> XGENE_PMU_EVENT_ATTR(wdb-full, 0x0a),
> XGENE_PMU_EVENT_ATTR(bank-fifo-full, 0x0b),
> XGENE_PMU_EVENT_ATTR(odb-full, 0x0c),
> XGENE_PMU_EVENT_ATTR(wbq-full, 0x0d),
> XGENE_PMU_EVENT_ATTR(bank-conflict-fifo-issue, 0x0e),
> XGENE_PMU_EVENT_ATTR(bank-fifo-issue, 0x0f),
> NULL,
> };
Got it. I'll do the same as format attribute groups
>
> > + /*
> > + * Each bit of the config1 field represents an agent from which the
> > + * request of the event come. The event is counted only if it's caused
> > + * by a request of an agent has the bit set.
> > + * By default, the event is counted for all agents.
> > + */
> > + if (config1)
> > + hwc->extra_reg.config = config1;
> > + else
> > + hwc->extra_reg.config = 0xFFFFFFFFFFFFFFFFULL;
>
> Previously I asked you to invert the meaning of this, such that the
> default would be to match all masters.
>
> I understand that in HW, you need to write 0xFFFFFFFFFFFFFFFF to match
> all masters, as you mentioned in your last reply. The simple way to
> handle that is to bitwise invert the value when writing it to HW , i.e.
> write ~(hwc->extra_reg.config). Please do so, updating the documentation
> appropriately.
>
Okay. I'll do so.
> [...]
>
> > +static int xgene_perf_add(struct perf_event *event, int flags)
> > +{
> > + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
> > + struct hw_perf_event *hw = &event->hw;
> > +
> > + event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
>
> Please either use event->hw.field or hw->field consistently.
Okay, will fix it consistently.
>
> > +
> > + /* Allocate an event counter */
> > + hw->idx = get_next_avail_cntr(pmu_dev);
> > + if (hw->idx < 0)
> > + return -EAGAIN;
> > +
> > + event->hw.extra_reg.reg = (u16) hw->idx;
>
> That cast shouldn't be necessary, given idx will be between 0 and 4, and
> reg is an unsigned int.
>
> Given this is already in hw->idx, what is the benefit of duplicating this?
>
> You can get rid of this line if you change _GET_CNTR to return
> ev->hw.idx.
Yes, I'll fix it.
>
> > +
> > + if (flags & PERF_EF_START)
> > + xgene_perf_start(event, PERF_EF_RELOAD);
> > +
> > + /* Update counter event pointer for Interrupt handler */
> > + pmu_dev->pmu_counter_event[hw->idx] = event;
>
> Are interrupts guaranteed to be disabled here, or should these be
> swapped? Otherwise, what happens if an interrupt comes in before we
> updated this pointer?
Right. Naturally, this should be updated before starting perf event.
I'll swap these. Thanks for catching it.
>
> > +
> > + return 0;
> > +}
> > +
> > +static void xgene_perf_del(struct perf_event *event, int flags)
> > +{
> > + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
> > +
> > + xgene_perf_stop(event, PERF_EF_UPDATE);
> > +
> > + /* clear the assigned counter */
> > + clear_avail_cntr(pmu_dev, _GET_CNTR(event));
> > +
> > + perf_event_update_userpage(event);
> > +}
>
> It would be a good idea to remove the dangling pmu_dev->pmu_counter_event
> pointer, even if not strictly required.
Sure, I'll reset it to NULL.
>
> > +
> > +static u64 xgene_perf_event_update(struct perf_event *event)
> > +{
> > + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
> > + struct hw_perf_event *hwc = &event->hw;
> > + u64 delta, prev_raw_count, new_raw_count;
> > +
> > +again:
> > + prev_raw_count = local64_read(&hwc->prev_count);
> > + new_raw_count = pmu_dev->max_period;
>
> I don't understand this. Why are we not reading the counter here?
>
> This means that the irq handler won't be reading the counter, which
> means we're throwing away events, and I suspect other cases are broken
> too.
>
When the overflow interrupt occurs, the PMU counter wraps to 0 and
continues to run.
This event_update function is called only to handle the The PMU
counter overflow interrupt occurs.
I'm assuming that when the overflow happens, the read back counter
value is the max period.
Is this assumption incorrect? Do you have any suggestion what I should
do. Because if I read the counter register,
it returns the minor wrapped around value.
Or should it be: new_count = counter read + max period?
> > +
> > + if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
> > + new_raw_count) != prev_raw_count)
> > + goto again;
> > +
> > + delta = (new_raw_count - prev_raw_count) & pmu_dev->max_period;
> > +
> > + local64_add(delta, &event->count);
> > + local64_sub(delta, &hwc->period_left);
>
> Given we aren't sampling, does the period left matter? It looks like
> drivers are inconsistent w.r.t. this, and I'm not immediately sure :(
>
I tried to drop it and the perf event count still works properly for me.
I'll remove it.
> > +
> > + return new_raw_count;
> > +}
> > +
> > +static int xgene_perf_event_set_period(struct perf_event *event)
> > +{
> > + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
> > + struct hw_perf_event *hwc = &event->hw;
> > + s64 left = local64_read(&hwc->period_left);
> > + s64 period = hwc->sample_period;
> > + int ret = 0;
> > +
> > + if (unlikely(left <= -period)) {
> > + left = period;
> > + local64_set(&hwc->period_left, left);
> > + hwc->last_period = period;
> > + ret = 1;
> > + }
> > +
> > + if (unlikely(left <= 0)) {
> > + left += period;
> > + local64_set(&hwc->period_left, left);
> > + hwc->last_period = period;
> > + ret = 1;
> > + }
> > +
> > + /*
> > + * Limit the maximum period to prevent the counter value
> > + * from overtaking the one we are about to program. In
> > + * effect we are reducing max_period to account for
> > + * interrupt latency (and we are being very conservative).
> > + */
> > + if (left > (pmu_dev->max_period >> 1))
> > + left = pmu_dev->max_period >> 1;
> > +
> > + local64_set(&hwc->prev_count, (u64) -left);
> > +
> > + xgene_pmu_write_counter(pmu_dev, hwc->idx, (u64)(-left) & 0xffffffff);
> > +
> > + perf_event_update_userpage(event);
> > +
> > + return ret;
> > +}
>
> Given the lack of sampling, I suspect that you can simply follow what
> the arm-cci driver does, and always use exactly half a max period.
Okay, I'll refer to the arm-cci driver.
>
> [...]
>
> > +static irqreturn_t _xgene_pmu_isr(int irq, struct xgene_pmu_dev *pmu_dev)
> > +{
> > + struct xgene_pmu *xgene_pmu = pmu_dev->parent;
> > + u32 pmovsr;
> > + int idx;
> > +
> > + pmovsr = readl(pmu_dev->inf->csr + PMU_PMOVSR) & PMU_OVERFLOW_MASK;
> > + /* Clear interrupt flag */
> > + if (xgene_pmu->version == PCP_PMU_V1)
> > + writel(0x0, pmu_dev->inf->csr + PMU_PMOVSR);
> > + else
> > + writel(pmovsr, pmu_dev->inf->csr + PMU_PMOVSR);
> > +
> > + if (!pmovsr)
> > + return IRQ_NONE;
> > +
> > + for (idx = 0; idx < PMU_MAX_COUNTERS; idx++) {
> > + struct perf_event *event = pmu_dev->pmu_counter_event[idx];
> > + int overflowed = pmovsr & BIT(idx);
> > +
> > + /* Ignore if we don't have an event. */
> > + if (!event || !overflowed)
> > + continue;
> > + xgene_perf_event_update(event);
> > + xgene_perf_event_set_period(event);
>
> As I mentioned earlier, the lack of a counter read in
> xgene_perf_event_update() means this is broken.
>
Please see above.
> > + }
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t xgene_pmu_isr(int irq, void *dev_id)
> > +{
> > + struct xgene_pmu_dev_ctx *ctx, *temp_ctx;
> > + struct xgene_pmu *xgene_pmu = dev_id;
> > + u32 val;
> > +
> > + xgene_pmu_mask_int(xgene_pmu);
>
> Why do you need to mask the IRQ? This handler is called in hard IRQ
> context.
>
Right. Let me change to use raw_spin_lock_irqsave here.
> > +
> > + /* Get Interrupt PMU source */
> > + val = readl(xgene_pmu->pcppmu_csr + PCPPMU_INTSTATUS_REG)
> > + & PCPPMU_INTMASK;
>
> I don't think you need the mask here, given you only test masks below.
> I think that can be removed.
>
> Otherwise, please leave the '&' dangling on the first line.
Right, this is not necessary. I'll remove it.
>
> > + if (val & PCPPMU_INT_MCU) {
> > + list_for_each_entry_safe(ctx, temp_ctx,
> > + &xgene_pmu->mcpmus, next) {
> > + _xgene_pmu_isr(irq, ctx->pmu_dev);
> > + }
> > + }
> > + if (val & PCPPMU_INT_MCB) {
> > + list_for_each_entry_safe(ctx, temp_ctx,
> > + &xgene_pmu->mcbpmus, next) {
> > + _xgene_pmu_isr(irq, ctx->pmu_dev);
> > + }
> > + }
> > + if (val & PCPPMU_INT_L3C) {
> > + list_for_each_entry_safe(ctx, temp_ctx,
> > + &xgene_pmu->l3cpmus, next) {
> > + _xgene_pmu_isr(irq, ctx->pmu_dev);
> > + }
> > + }
> > + if (val & PCPPMU_INT_IOB) {
> > + list_for_each_entry_safe(ctx, temp_ctx,
> > + &xgene_pmu->iobpmus, next) {
> > + _xgene_pmu_isr(irq, ctx->pmu_dev);
> > + }
> > + }
> > +
> > + xgene_pmu_unmask_int(xgene_pmu);
> > +
> > + return IRQ_HANDLED;
> > +}
>
> [...]
>
> > + /* Populate PMU event atrribute arrays */
> > + for (i = 0; i < ARRAY_SIZE(l3c_pmu_events); i++)
> > + l3c_pmu_events_attrs[i] =
> > + (struct attribute *) &l3c_pmu_events[i].attr.attr;
> > + for (i = 0; i < ARRAY_SIZE(iob_pmu_events); i++)
> > + iob_pmu_events_attrs[i] =
> > + (struct attribute *) &iob_pmu_events[i].attr.attr;
> > + for (i = 0; i < ARRAY_SIZE(mcb_pmu_events); i++)
> > + mcb_pmu_events_attrs[i] =
> > + (struct attribute *) &mcb_pmu_events[i].attr.attr;
> > + for (i = 0; i < ARRAY_SIZE(mc_pmu_events); i++)
> > + mc_pmu_events_attrs[i] =
> > + (struct attribute *) &mc_pmu_events[i].attr.attr;
>
> As mentioend earlier, you can do this at compile time. Please do.
Yes, I'll do so.
Thanks,
--
Tai
[toc] | [prev] | [next] | [standalone]
| From | Mark Rutland <mark.rutland@arm.com> |
|---|---|
| Date | 2016-06-27 18:10 +0200 |
| Subject | Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver |
| Message-ID | <rOHgJ-2xb-3@gated-at.bofh.it> |
| In reply to | #1431188 |
Hi,
On Sat, Jun 25, 2016 at 10:54:20AM -0700, Tai Tri Nguyen wrote:
> On Thu, Jun 23, 2016 at 7:32 AM, Mark Rutland <mark.rutland@arm.com> wrote:
> > On Wed, Jun 22, 2016 at 11:06:58AM -0700, Tai Nguyen wrote:
> > > +#define _GET_CNTR(ev) (ev->hw.extra_reg.reg)
> > > +#define _GET_EVENTID(ev) (ev->hw.config & 0xFFULL)
> > > +#define _GET_AGENTID(ev) (ev->hw.extra_reg.config & 0xFFFFFFFFULL)
> > > +#define _GET_AGENT1ID(ev) ((ev->hw.extra_reg.config >> 32) & 0xFFFFFFFFULL)
> >
> > I don't think you need to use the extra_reg fields for this. It's a
> > little bit confusing to use them, as the extra_reg (and branch_reg)
> > fields are for separately allocated PMU state.
> >
> > _GET_CNTR can use hw_perf_event::idx, and _GET_AGENT*_ID can use
> > config_base.
>
> I need a 64 bit field for GET_AGENT*ID. The config_base is only 32 bit.
> Can you please suggest another field?
Judging by <linux/perf_event.h> config_base is an unsigned long, which
will be 64 bit for arm64, which is the only place this is used.
So unless I've missed something, that should be ok, no?
> > > +static u64 xgene_perf_event_update(struct perf_event *event)
> > > +{
> > > + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
> > > + struct hw_perf_event *hwc = &event->hw;
> > > + u64 delta, prev_raw_count, new_raw_count;
> > > +
> > > +again:
> > > + prev_raw_count = local64_read(&hwc->prev_count);
> > > + new_raw_count = pmu_dev->max_period;
> >
> > I don't understand this. Why are we not reading the counter here?
> >
> > This means that the irq handler won't be reading the counter, which
> > means we're throwing away events, and I suspect other cases are broken
> > too.
> >
>
> When the overflow interrupt occurs, the PMU counter wraps to 0 and
> continues to run.
> This event_update function is called only to handle the The PMU
> counter overflow interrupt occurs.
> I'm assuming that when the overflow happens, the read back counter
> value is the max period.
Well, it could be a larger value depending on the latency.
> Is this assumption incorrect? Do you have any suggestion what I should
> do. Because if I read the counter register,
> it returns the minor wrapped around value.
> Or should it be: new_count = counter read + max period?
We handle the wraparound when we caluclate the delta below. By setting
the interrupt to occur within half of the max period (as per the arm-cci
driver), we avoid (with a high degree of certainty) the risk of
overtaking the prev raw count again before handlnig the IRQ.
The raw_* values above should be the *raw* values from the HW, as their
names imply.
> > > + if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
> > > + new_raw_count) != prev_raw_count)
> > > + goto again;
> > > +
> > > + delta = (new_raw_count - prev_raw_count) & pmu_dev->max_period;
> > > +
> > > + local64_add(delta, &event->count);
> > > + local64_sub(delta, &hwc->period_left);
> >
> > Given we aren't sampling, does the period left matter? It looks like
> > drivers are inconsistent w.r.t. this, and I'm not immediately sure :(
>
> I tried to drop it and the perf event count still works properly for me.
> I'll remove it.
[...]
> > > +static irqreturn_t xgene_pmu_isr(int irq, void *dev_id)
> > > +{
> > > + struct xgene_pmu_dev_ctx *ctx, *temp_ctx;
> > > + struct xgene_pmu *xgene_pmu = dev_id;
> > > + u32 val;
> > > +
> > > + xgene_pmu_mask_int(xgene_pmu);
> >
> > Why do you need to mask the IRQ? This handler is called in hard IRQ
> > context.
>
> Right. Let me change to use raw_spin_lock_irqsave here.
Interesting; I see we do that in the CCI PMU driver. What are we trying
to protect?
We don't do that in the CPU PMU drivers, and I'm missng something here.
Hopefully I'm just being thick...
Thanks,
Mark.
[toc] | [prev] | [next] | [standalone]
| From | Tai Tri Nguyen <ttnguyen@apm.com> |
|---|---|
| Date | 2016-06-27 20:00 +0200 |
| Subject | Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver |
| Message-ID | <rOIZb-3tG-7@gated-at.bofh.it> |
| In reply to | #1432139 |
Hi Mark,
On Mon, Jun 27, 2016 at 9:00 AM, Mark Rutland <mark.rutland@arm.com> wrote:
> Hi,
>
> On Sat, Jun 25, 2016 at 10:54:20AM -0700, Tai Tri Nguyen wrote:
>> On Thu, Jun 23, 2016 at 7:32 AM, Mark Rutland <mark.rutland@arm.com> wrote:
>> > On Wed, Jun 22, 2016 at 11:06:58AM -0700, Tai Nguyen wrote:
>> > > +#define _GET_CNTR(ev) (ev->hw.extra_reg.reg)
>> > > +#define _GET_EVENTID(ev) (ev->hw.config & 0xFFULL)
>> > > +#define _GET_AGENTID(ev) (ev->hw.extra_reg.config & 0xFFFFFFFFULL)
>> > > +#define _GET_AGENT1ID(ev) ((ev->hw.extra_reg.config >> 32) & 0xFFFFFFFFULL)
>> >
>> > I don't think you need to use the extra_reg fields for this. It's a
>> > little bit confusing to use them, as the extra_reg (and branch_reg)
>> > fields are for separately allocated PMU state.
>> >
>> > _GET_CNTR can use hw_perf_event::idx, and _GET_AGENT*_ID can use
>> > config_base.
>>
>> I need a 64 bit field for GET_AGENT*ID. The config_base is only 32 bit.
>> Can you please suggest another field?
>
> Judging by <linux/perf_event.h> config_base is an unsigned long, which
> will be 64 bit for arm64, which is the only place this is used.
>
> So unless I've missed something, that should be ok, no?
>
I missed the point. Okay, I'll make the change.
>> > > +static u64 xgene_perf_event_update(struct perf_event *event)
>> > > +{
>> > > + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
>> > > + struct hw_perf_event *hwc = &event->hw;
>> > > + u64 delta, prev_raw_count, new_raw_count;
>> > > +
>> > > +again:
>> > > + prev_raw_count = local64_read(&hwc->prev_count);
>> > > + new_raw_count = pmu_dev->max_period;
>> >
>> > I don't understand this. Why are we not reading the counter here?
>> >
>> > This means that the irq handler won't be reading the counter, which
>> > means we're throwing away events, and I suspect other cases are broken
>> > too.
>> >
>>
>> When the overflow interrupt occurs, the PMU counter wraps to 0 and
>> continues to run.
>> This event_update function is called only to handle the The PMU
>> counter overflow interrupt occurs.
>> I'm assuming that when the overflow happens, the read back counter
>> value is the max period.
>
> Well, it could be a larger value depending on the latency.
>
>> Is this assumption incorrect? Do you have any suggestion what I should
>> do. Because if I read the counter register,
>> it returns the minor wrapped around value.
>> Or should it be: new_count = counter read + max period?
>
> We handle the wraparound when we caluclate the delta below. By setting
> the interrupt to occur within half of the max period (as per the arm-cci
> driver), we avoid (with a high degree of certainty) the risk of
> overtaking the prev raw count again before handlnig the IRQ.
>
> The raw_* values above should be the *raw* values from the HW, as their
> names imply.
Yes, I got it now. The same implementation should work fine for me.
>
>> > > + if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
>> > > + new_raw_count) != prev_raw_count)
>> > > + goto again;
>> > > +
>> > > + delta = (new_raw_count - prev_raw_count) & pmu_dev->max_period;
>> > > +
>> > > + local64_add(delta, &event->count);
>> > > + local64_sub(delta, &hwc->period_left);
>> >
>> > Given we aren't sampling, does the period left matter? It looks like
>> > drivers are inconsistent w.r.t. this, and I'm not immediately sure :(
>>
>> I tried to drop it and the perf event count still works properly for me.
>> I'll remove it.
>
> [...]
>
>> > > +static irqreturn_t xgene_pmu_isr(int irq, void *dev_id)
>> > > +{
>> > > + struct xgene_pmu_dev_ctx *ctx, *temp_ctx;
>> > > + struct xgene_pmu *xgene_pmu = dev_id;
>> > > + u32 val;
>> > > +
>> > > + xgene_pmu_mask_int(xgene_pmu);
>> >
>> > Why do you need to mask the IRQ? This handler is called in hard IRQ
>> > context.
>>
>> Right. Let me change to use raw_spin_lock_irqsave here.
>
> Interesting; I see we do that in the CCI PMU driver. What are we trying
> to protect?
>
> We don't do that in the CPU PMU drivers, and I'm missng something here.
> Hopefully I'm just being thick...
For me, we can't guarantee that the interrupt doesn't happen on the other CPUs.
The irqbalancer may change the SMP affinity.
Thanks,
--
Tai
[toc] | [prev] | [next] | [standalone]
| From | Mark Rutland <mark.rutland@arm.com> |
|---|---|
| Date | 2016-06-28 13:30 +0200 |
| Subject | Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver |
| Message-ID | <rOZnk-6lK-9@gated-at.bofh.it> |
| In reply to | #1432200 |
On Mon, Jun 27, 2016 at 10:54:07AM -0700, Tai Tri Nguyen wrote:
> On Mon, Jun 27, 2016 at 9:00 AM, Mark Rutland <mark.rutland@arm.com> wrote:
> > On Sat, Jun 25, 2016 at 10:54:20AM -0700, Tai Tri Nguyen wrote:
> >> On Thu, Jun 23, 2016 at 7:32 AM, Mark Rutland <mark.rutland@arm.com> wrote:
> >> > On Wed, Jun 22, 2016 at 11:06:58AM -0700, Tai Nguyen wrote:
> >> > > +static irqreturn_t xgene_pmu_isr(int irq, void *dev_id)
> >> > > +{
> >> > > + struct xgene_pmu_dev_ctx *ctx, *temp_ctx;
> >> > > + struct xgene_pmu *xgene_pmu = dev_id;
> >> > > + u32 val;
> >> > > +
> >> > > + xgene_pmu_mask_int(xgene_pmu);
> >> >
> >> > Why do you need to mask the IRQ? This handler is called in hard IRQ
> >> > context.
> >>
> >> Right. Let me change to use raw_spin_lock_irqsave here.
> >
> > Interesting; I see we do that in the CCI PMU driver. What are we trying
> > to protect?
> >
> > We don't do that in the CPU PMU drivers, and I'm missng something here.
> > Hopefully I'm just being thick...
>
> For me, we can't guarantee that the interrupt doesn't happen on the other CPUs.
> The irqbalancer may change the SMP affinity.
The perf core requires things to occur on the same CPU for correct
synchronisation.
If an IRQ balancer can change the IRQ affinity behind our back, we have
much bigger problems that affect other uncore PMU drivers.
Marc, is there a sensible way to prevent irq balancers from changing the
affinity of an IRQ, e.g. a kernel-side pinning mechanism, or some way we
can be notified and reject changes?
Thanks,
Mark.
[toc] | [prev] | [next] | [standalone]
| From | Marc Zyngier <marc.zyngier@arm.com> |
|---|---|
| Date | 2016-06-28 15:30 +0200 |
| Subject | Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver |
| Message-ID | <rP1fs-7Cg-27@gated-at.bofh.it> |
| In reply to | #1432876 |
On 28/06/16 12:13, Mark Rutland wrote:
> On Mon, Jun 27, 2016 at 10:54:07AM -0700, Tai Tri Nguyen wrote:
>> On Mon, Jun 27, 2016 at 9:00 AM, Mark Rutland <mark.rutland@arm.com> wrote:
>>> On Sat, Jun 25, 2016 at 10:54:20AM -0700, Tai Tri Nguyen wrote:
>>>> On Thu, Jun 23, 2016 at 7:32 AM, Mark Rutland <mark.rutland@arm.com> wrote:
>>>>> On Wed, Jun 22, 2016 at 11:06:58AM -0700, Tai Nguyen wrote:
>>>>>> +static irqreturn_t xgene_pmu_isr(int irq, void *dev_id)
>>>>>> +{
>>>>>> + struct xgene_pmu_dev_ctx *ctx, *temp_ctx;
>>>>>> + struct xgene_pmu *xgene_pmu = dev_id;
>>>>>> + u32 val;
>>>>>> +
>>>>>> + xgene_pmu_mask_int(xgene_pmu);
>>>>>
>>>>> Why do you need to mask the IRQ? This handler is called in hard IRQ
>>>>> context.
>>>>
>>>> Right. Let me change to use raw_spin_lock_irqsave here.
>>>
>>> Interesting; I see we do that in the CCI PMU driver. What are we trying
>>> to protect?
>>>
>>> We don't do that in the CPU PMU drivers, and I'm missng something here.
>>> Hopefully I'm just being thick...
>>
>> For me, we can't guarantee that the interrupt doesn't happen on the other CPUs.
>> The irqbalancer may change the SMP affinity.
>
> The perf core requires things to occur on the same CPU for correct
> synchronisation.
>
> If an IRQ balancer can change the IRQ affinity behind our back, we have
> much bigger problems that affect other uncore PMU drivers.
>
> Marc, is there a sensible way to prevent irq balancers from changing the
> affinity of an IRQ, e.g. a kernel-side pinning mechanism, or some way we
> can be notified and reject changes?
You can get notified (see irq_set_affinity_notifier), but there no way
to veto the change. What should probably be done is to set the affinity
hint (irq_set_affinity_hint), and use the notifier to migrate the
context if possible. Note that you'll be called in process context,
which will race against interrupts being delivered on the new CPU.
M.
--
Jazz is not dead. It just smells funny...
[toc] | [prev] | [next] | [standalone]
| From | Mark Rutland <mark.rutland@arm.com> |
|---|---|
| Date | 2016-06-28 16:20 +0200 |
| Subject | Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver |
| Message-ID | <rP21P-8cR-19@gated-at.bofh.it> |
| In reply to | #1432994 |
On Tue, Jun 28, 2016 at 02:21:38PM +0100, Marc Zyngier wrote:
> On 28/06/16 12:13, Mark Rutland wrote:
> > On Mon, Jun 27, 2016 at 10:54:07AM -0700, Tai Tri Nguyen wrote:
> >> On Mon, Jun 27, 2016 at 9:00 AM, Mark Rutland <mark.rutland@arm.com> wrote:
> >>> On Sat, Jun 25, 2016 at 10:54:20AM -0700, Tai Tri Nguyen wrote:
> >>>> On Thu, Jun 23, 2016 at 7:32 AM, Mark Rutland <mark.rutland@arm.com> wrote:
> >>>>> On Wed, Jun 22, 2016 at 11:06:58AM -0700, Tai Nguyen wrote:
> >>>>>> +static irqreturn_t xgene_pmu_isr(int irq, void *dev_id)
> >>>>>> +{
> >>>>>> + struct xgene_pmu_dev_ctx *ctx, *temp_ctx;
> >>>>>> + struct xgene_pmu *xgene_pmu = dev_id;
> >>>>>> + u32 val;
> >>>>>> +
> >>>>>> + xgene_pmu_mask_int(xgene_pmu);
> >>>>>
> >>>>> Why do you need to mask the IRQ? This handler is called in hard IRQ
> >>>>> context.
> >>>>
> >>>> Right. Let me change to use raw_spin_lock_irqsave here.
> >>>
> >>> Interesting; I see we do that in the CCI PMU driver. What are we trying
> >>> to protect?
> >>>
> >>> We don't do that in the CPU PMU drivers, and I'm missng something here.
> >>> Hopefully I'm just being thick...
> >>
> >> For me, we can't guarantee that the interrupt doesn't happen on the other CPUs.
> >> The irqbalancer may change the SMP affinity.
> >
> > The perf core requires things to occur on the same CPU for correct
> > synchronisation.
> >
> > If an IRQ balancer can change the IRQ affinity behind our back, we have
> > much bigger problems that affect other uncore PMU drivers.
> >
> > Marc, is there a sensible way to prevent irq balancers from changing the
> > affinity of an IRQ, e.g. a kernel-side pinning mechanism, or some way we
> > can be notified and reject changes?
>
> You can get notified (see irq_set_affinity_notifier), but there no way
> to veto the change.
:(
> What should probably be done is to set the affinity hint
> (irq_set_affinity_hint), and use the notifier to migrate the context
> if possible. Note that you'll be called in process context, which will
> race against interrupts being delivered on the new CPU.
I'll have to go digging into what exactly perf_pmu_migrate_context
requires. Given the race, I'm not sure if that's going to work. It's
certainly not going to be self contained.
That also won't work for CPU PMUs, where it makes no sense to migrate
context or IRQs. For those we appear to already be using have
IRQF_NOBALANCING, which sounds like exactly what we want.
That appears to influence irq_can_set_affinity(), which the procfs
helpers check.
Tai, can you try requesting the IRQ with the IRQF_NOBALANCING flag?
Thanks,
Mark.
[toc] | [prev] | [next] | [standalone]
| From | Tai Tri Nguyen <ttnguyen@apm.com> |
|---|---|
| Date | 2016-06-28 18:50 +0200 |
| Subject | Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver |
| Message-ID | <rP4mZ-157-3@gated-at.bofh.it> |
| In reply to | #1433021 |
Hi Mark,
On Tue, Jun 28, 2016 at 7:14 AM, Mark Rutland <mark.rutland@arm.com> wrote:
> On Tue, Jun 28, 2016 at 02:21:38PM +0100, Marc Zyngier wrote:
>> On 28/06/16 12:13, Mark Rutland wrote:
>> > On Mon, Jun 27, 2016 at 10:54:07AM -0700, Tai Tri Nguyen wrote:
>> >> On Mon, Jun 27, 2016 at 9:00 AM, Mark Rutland <mark.rutland@arm.com> wrote:
>> >>> On Sat, Jun 25, 2016 at 10:54:20AM -0700, Tai Tri Nguyen wrote:
>> >>>> On Thu, Jun 23, 2016 at 7:32 AM, Mark Rutland <mark.rutland@arm.com> wrote:
>> >>>>> On Wed, Jun 22, 2016 at 11:06:58AM -0700, Tai Nguyen wrote:
>> >>>>>> +static irqreturn_t xgene_pmu_isr(int irq, void *dev_id)
>> >>>>>> +{
>> >>>>>> + struct xgene_pmu_dev_ctx *ctx, *temp_ctx;
>> >>>>>> + struct xgene_pmu *xgene_pmu = dev_id;
>> >>>>>> + u32 val;
>> >>>>>> +
>> >>>>>> + xgene_pmu_mask_int(xgene_pmu);
>> >>>>>
>> >>>>> Why do you need to mask the IRQ? This handler is called in hard IRQ
>> >>>>> context.
>> >>>>
>> >>>> Right. Let me change to use raw_spin_lock_irqsave here.
>> >>>
>> >>> Interesting; I see we do that in the CCI PMU driver. What are we trying
>> >>> to protect?
>> >>>
>> >>> We don't do that in the CPU PMU drivers, and I'm missng something here.
>> >>> Hopefully I'm just being thick...
>> >>
>> >> For me, we can't guarantee that the interrupt doesn't happen on the other CPUs.
>> >> The irqbalancer may change the SMP affinity.
>> >
>> > The perf core requires things to occur on the same CPU for correct
>> > synchronisation.
>> >
>> > If an IRQ balancer can change the IRQ affinity behind our back, we have
>> > much bigger problems that affect other uncore PMU drivers.
>> >
>> > Marc, is there a sensible way to prevent irq balancers from changing the
>> > affinity of an IRQ, e.g. a kernel-side pinning mechanism, or some way we
>> > can be notified and reject changes?
>>
>> You can get notified (see irq_set_affinity_notifier), but there no way
>> to veto the change.
>
> :(
>
>> What should probably be done is to set the affinity hint
>> (irq_set_affinity_hint), and use the notifier to migrate the context
>> if possible. Note that you'll be called in process context, which will
>> race against interrupts being delivered on the new CPU.
>
> I'll have to go digging into what exactly perf_pmu_migrate_context
> requires. Given the race, I'm not sure if that's going to work. It's
> certainly not going to be self contained.
>
> That also won't work for CPU PMUs, where it makes no sense to migrate
> context or IRQs. For those we appear to already be using have
> IRQF_NOBALANCING, which sounds like exactly what we want.
>
> That appears to influence irq_can_set_affinity(), which the procfs
> helpers check.
>
> Tai, can you try requesting the IRQ with the IRQF_NOBALANCING flag?
This seems to work.
I also tried to change smp_affinity through procfs and it returns write error.
The interrupt seems to be excluded from irq balancing.
Should I make the change?
Thanks,
--
Tai
[toc] | [prev] | [next] | [standalone]
| From | Mark Rutland <mark.rutland@arm.com> |
|---|---|
| Date | 2016-06-28 19:00 +0200 |
| Subject | Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver |
| Message-ID | <rP4wG-18P-5@gated-at.bofh.it> |
| In reply to | #1433108 |
On Tue, Jun 28, 2016 at 09:39:36AM -0700, Tai Tri Nguyen wrote: > Hi Mark, > > On Tue, Jun 28, 2016 at 7:14 AM, Mark Rutland <mark.rutland@arm.com> wrote: > > On Tue, Jun 28, 2016 at 02:21:38PM +0100, Marc Zyngier wrote: > >> On 28/06/16 12:13, Mark Rutland wrote: > >> > Marc, is there a sensible way to prevent irq balancers from changing the > >> > affinity of an IRQ, e.g. a kernel-side pinning mechanism, or some way we > >> > can be notified and reject changes? > >> > >> You can get notified (see irq_set_affinity_notifier), but there no way > >> to veto the change. > > > > :( > > > >> What should probably be done is to set the affinity hint > >> (irq_set_affinity_hint), and use the notifier to migrate the context > >> if possible. Note that you'll be called in process context, which will > >> race against interrupts being delivered on the new CPU. > > > > I'll have to go digging into what exactly perf_pmu_migrate_context > > requires. Given the race, I'm not sure if that's going to work. It's > > certainly not going to be self contained. > > > > That also won't work for CPU PMUs, where it makes no sense to migrate > > context or IRQs. For those we appear to already be using have > > IRQF_NOBALANCING, which sounds like exactly what we want. > > > > That appears to influence irq_can_set_affinity(), which the procfs > > helpers check. > > > > Tai, can you try requesting the IRQ with the IRQF_NOBALANCING flag? > > This seems to work. > I also tried to change smp_affinity through procfs and it returns write error. > The interrupt seems to be excluded from irq balancing. > Should I make the change? Yes please. I believe you also need IRQF_NO_THREAD per the CPU PMU drivers, so please add both flags. I'll do the same for the CCN and CCI PMU drivers. Thanks, Mark.
[toc] | [prev] | [next] | [standalone]
| From | Tai Tri Nguyen <ttnguyen@apm.com> |
|---|---|
| Date | 2016-06-28 20:10 +0200 |
| Subject | Re: [PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver |
| Message-ID | <rP5Cq-20q-9@gated-at.bofh.it> |
| In reply to | #1433121 |
Hi Mark, On Tue, Jun 28, 2016 at 9:59 AM, Mark Rutland <mark.rutland@arm.com> wrote: > On Tue, Jun 28, 2016 at 09:39:36AM -0700, Tai Tri Nguyen wrote: >> Hi Mark, >> >> On Tue, Jun 28, 2016 at 7:14 AM, Mark Rutland <mark.rutland@arm.com> wrote: >> > On Tue, Jun 28, 2016 at 02:21:38PM +0100, Marc Zyngier wrote: >> >> On 28/06/16 12:13, Mark Rutland wrote: >> >> > Marc, is there a sensible way to prevent irq balancers from changing the >> >> > affinity of an IRQ, e.g. a kernel-side pinning mechanism, or some way we >> >> > can be notified and reject changes? >> >> >> >> You can get notified (see irq_set_affinity_notifier), but there no way >> >> to veto the change. >> > >> > :( >> > >> >> What should probably be done is to set the affinity hint >> >> (irq_set_affinity_hint), and use the notifier to migrate the context >> >> if possible. Note that you'll be called in process context, which will >> >> race against interrupts being delivered on the new CPU. >> > >> > I'll have to go digging into what exactly perf_pmu_migrate_context >> > requires. Given the race, I'm not sure if that's going to work. It's >> > certainly not going to be self contained. >> > >> > That also won't work for CPU PMUs, where it makes no sense to migrate >> > context or IRQs. For those we appear to already be using have >> > IRQF_NOBALANCING, which sounds like exactly what we want. >> > >> > That appears to influence irq_can_set_affinity(), which the procfs >> > helpers check. >> > >> > Tai, can you try requesting the IRQ with the IRQF_NOBALANCING flag? >> >> This seems to work. >> I also tried to change smp_affinity through procfs and it returns write error. >> The interrupt seems to be excluded from irq balancing. >> Should I make the change? > > Yes please. I believe you also need IRQF_NO_THREAD per the CPU PMU > drivers, so please add both flags. I'll do the same for the CCN and CCI > PMU drivers. Btw, please skip the v5 I've sent out yesterday. I'll soon send the v6 with this change. Thanks, -- Tai
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web