Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1425198 > unrolled thread

[PATCH 16/16] arm64: dts: msm8996: add sdc2 support

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 16/16] arm64: dts: msm8996: add sdc2 support Srinivas Kandagatla <srinivas.kandagatla@linaro.org> - 2016-06-17 17:20 +0200
    [PATCH v2 16/16] arm64: dts: msm8996: add sdc2 support Srinivas Kandagatla <srinivas.kandagatla@linaro.org> - 2016-06-21 19:50 +0200
      Re: [PATCH v2 16/16] arm64: dts: msm8996: add sdc2 support Andy Gross <andy.gross@linaro.org> - 2016-06-21 23:40 +0200

#1425198 — [PATCH 16/16] arm64: dts: msm8996: add sdc2 support

This patch adds support to sdc2 sdhci controller, which is used on some
of the boards.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f68b078..5db7bf4 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -246,6 +246,21 @@
 			status = "disabled";
 		};
 
+		sdhc2: sdhci@74A4900 {
+			 status = "disabled";
+			 compatible = "qcom,sdhci-msm-v4";
+			 reg = <0x74A4900 0x314>, <0x74A4000 0x800>;
+			 reg-names = "hc_mem", "core_mem";
+
+			 interrupts = <0 125 0>, <0 221 0>;
+			 interrupt-names = "hc_irq", "pwr_irq";
+
+			 clock-names = "iface", "core";
+			 clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+			 <&gcc GCC_SDCC2_APPS_CLK>;
+			 bus-width = <4>;
+		 };
+
 		msmgpio: pinctrl@1010000 {
 			compatible = "qcom,msm8996-pinctrl";
 			reg = <0x01010000 0x300000>;
-- 
2.7.4

[toc] | [next] | [standalone]

#1428015 — [PATCH v2 16/16] arm64: dts: msm8996: add sdc2 support

This patch adds support to sdc2 sdhci controller, which is used on some
of the boards.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
Hi Andy, 

Am resending just this one patch, as It does not make sense
to resend entire series for such a small change.

changes since v1:
	- converted sdhci address from caps to small.

 arch/arm64/boot/dts/qcom/msm8996.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f68b078..55ec3e8 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -246,6 +246,21 @@
 			status = "disabled";
 		};
 
+		sdhc2: sdhci@74a4900 {
+			 status = "disabled";
+			 compatible = "qcom,sdhci-msm-v4";
+			 reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
+			 reg-names = "hc_mem", "core_mem";
+
+			 interrupts = <0 125 0>, <0 221 0>;
+			 interrupt-names = "hc_irq", "pwr_irq";
+
+			 clock-names = "iface", "core";
+			 clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+			 <&gcc GCC_SDCC2_APPS_CLK>;
+			 bus-width = <4>;
+		 };
+
 		msmgpio: pinctrl@1010000 {
 			compatible = "qcom,msm8996-pinctrl";
 			reg = <0x01010000 0x300000>;
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1428204 — Re: [PATCH v2 16/16] arm64: dts: msm8996: add sdc2 support

On Tue, Jun 21, 2016 at 06:39:53PM +0100, Srinivas Kandagatla wrote:
> This patch adds support to sdc2 sdhci controller, which is used on some
> of the boards.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> Hi Andy, 
> 
> Am resending just this one patch, as It does not make sense
> to resend entire series for such a small change.

Got it.  Thanks for the clarification.


Andy

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web