Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1424691 > unrolled thread

[RESEND v7 0/6] regulator: mfd: max8997: Add regmap

Back to article view | Back to linux.kernel

Contents

  [RESEND v7 0/6] regulator: mfd: max8997: Add regmap Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-06-17 08:20 +0200
    [RESEND v7 4/6] extcon: max8997: Fix handling error code of  regmap_irq_get_virq() Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-06-17 08:20 +0200
    [RESEND v7 5/6] rtc: max8997: Check for ERRNO of regmap_irq_get_virq() Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-06-17 08:20 +0200
    [RESEND v7 2/6] mfd: max8997: handle IRQs using regmap Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-06-17 08:20 +0200
    [RESEND v7 6/6] extcon: max8997: Fix inconsistent indenting Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-06-17 08:20 +0200
    [RESEND v7 3/6] mfd: max8997: Change irq names to upper case Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-06-17 08:20 +0200
    Re: [RESEND v7 1/6] mfd: max8997: Use regmap to access registers Mark Brown <broonie@kernel.org> - 2016-06-17 15:10 +0200

#1424691 — [RESEND v7 0/6] regulator: mfd: max8997: Add regmap

Dear Mark,

I'm pushing old Robert's work and I miss only ack from you.
Could you take a look at patch 1/6?


Changes since v6
================
1. Add some acks.
2. Remove patches already applied.


Best regards,
Krzysztof


Krzysztof Kozlowski (3):
  extcon: max8997: Fix handling error code of regmap_irq_get_virq()
  rtc: max8997: Check for ERRNO of regmap_irq_get_virq()
  extcon: max8997: Fix inconsistent indenting

Robert Baldyga (3):
  mfd: max8997: Use regmap to access registers
  mfd: max8997: handle IRQs using regmap
  mfd: max8997: Change irq names to upper case

 drivers/extcon/extcon-max8997.c       |  72 +++----
 drivers/input/misc/max8997_haptic.c   |  34 +--
 drivers/leds/leds-max8997.c           |  13 +-
 drivers/mfd/Kconfig                   |   3 +-
 drivers/mfd/Makefile                  |   2 +-
 drivers/mfd/max8997-irq.c             | 383 ----------------------------------
 drivers/mfd/max8997.c                 | 245 +++++++++++++++-------
 drivers/power/max8997_charger.c       |  33 +--
 drivers/regulator/max8997-regulator.c |  87 ++++----
 drivers/rtc/rtc-max8997.c             |  60 +++---
 include/linux/mfd/max8997-private.h   |  82 ++++++--
 11 files changed, 385 insertions(+), 629 deletions(-)
 delete mode 100644 drivers/mfd/max8997-irq.c

-- 
1.9.1

[toc] | [next] | [standalone]

#1424693 — [RESEND v7 4/6] extcon: max8997: Fix handling error code of regmap_irq_get_virq()

The regmap_irq_get_virq() can return negative ERRNO, so its result
should not be stored in unsigned int because error would be ignored.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/extcon/extcon-max8997.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index 68754ac2c8ea..0afa3e8b5dc3 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -660,11 +660,11 @@ static int max8997_muic_probe(struct platform_device *pdev)
 
 	for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) {
 		struct max8997_muic_irq *muic_irq = &muic_irqs[i];
-		unsigned int virq = 0;
+		int virq = 0;
 
 		virq = regmap_irq_get_virq(max8997->irq_data_muic,
 					muic_irq->irq);
-		if (!virq) {
+		if (virq <= 0) {
 			ret = -EINVAL;
 			goto err_irq;
 		}
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1424696 — [RESEND v7 5/6] rtc: max8997: Check for ERRNO of regmap_irq_get_virq()

The regmap_irq_get_virq() can return zero or negative ERRNO, so it is
insufficient to check only for non-zero value.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 drivers/rtc/rtc-max8997.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-max8997.c b/drivers/rtc/rtc-max8997.c
index 4998aee0f07f..1a06e17ebe9b 100644
--- a/drivers/rtc/rtc-max8997.c
+++ b/drivers/rtc/rtc-max8997.c
@@ -497,7 +497,7 @@ static int max8997_rtc_probe(struct platform_device *pdev)
 	}
 
 	virq = regmap_irq_get_virq(max8997->irq_data, MAX8997_PMICIRQ_RTCA1);
-	if (!virq) {
+	if (virq <= 0) {
 		dev_err(&pdev->dev, "Failed to create mapping alarm IRQ\n");
 		ret = -ENXIO;
 		goto err_out;
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1424699 — [RESEND v7 2/6] mfd: max8997: handle IRQs using regmap

From: Robert Baldyga <r.baldyga@samsung.com>

This patch modifies mfd driver to use regmap for handling interrupts.
It allows to simplify irq handling process. This modifications needed
to make small changes in function drivers, which use interrupts.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[k.kozlowski: Collect acks, rebase on v4.6-rc6]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/extcon/extcon-max8997.c     |   3 +-
 drivers/mfd/Kconfig                 |   2 +-
 drivers/mfd/Makefile                |   2 +-
 drivers/mfd/max8997-irq.c           | 369 ------------------------------------
 drivers/mfd/max8997.c               | 112 ++++++++++-
 drivers/rtc/rtc-max8997.c           |   2 +-
 include/linux/mfd/max8997-private.h |  63 +++++-
 7 files changed, 165 insertions(+), 388 deletions(-)
 delete mode 100644 drivers/mfd/max8997-irq.c

diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index fc812257bfc7..9d27cc23038f 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -662,7 +662,8 @@ static int max8997_muic_probe(struct platform_device *pdev)
 		struct max8997_muic_irq *muic_irq = &muic_irqs[i];
 		unsigned int virq = 0;
 
-		virq = irq_create_mapping(max8997->irq_domain, muic_irq->irq);
+		virq = regmap_irq_get_virq(max8997->irq_data_muic,
+					muic_irq->irq);
 		if (!virq) {
 			ret = -EINVAL;
 			goto err_irq;
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d7c6491ce3b9..b1bc339a91f9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -622,7 +622,7 @@ config MFD_MAX8997
 	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
-	select IRQ_DOMAIN
+	select REGMAP_IRQ
 	help
 	  Say yes here to add support for Maxim Semiconductor MAX8997/8966.
 	  This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 42a66e19e191..cd2cd2b2c316 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -135,7 +135,7 @@ obj-$(CONFIG_MFD_MAX77843)	+= max77843.o
 obj-$(CONFIG_MFD_MAX8907)	+= max8907.o
 max8925-objs			:= max8925-core.o max8925-i2c.o
 obj-$(CONFIG_MFD_MAX8925)	+= max8925.o
-obj-$(CONFIG_MFD_MAX8997)	+= max8997.o max8997-irq.o
+obj-$(CONFIG_MFD_MAX8997)	+= max8997.o
 obj-$(CONFIG_MFD_MAX8998)	+= max8998.o max8998-irq.o
 
 pcf50633-objs			:= pcf50633-core.o pcf50633-irq.o
diff --git a/drivers/mfd/max8997-irq.c b/drivers/mfd/max8997-irq.c
deleted file mode 100644
index 6ab5f955c510..000000000000
--- a/drivers/mfd/max8997-irq.c
+++ /dev/null
@@ -1,369 +0,0 @@
-/*
- * max8997-irq.c - Interrupt controller support for MAX8997
- *
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * This driver is based on max8998-irq.c
- */
-
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/mfd/max8997.h>
-#include <linux/mfd/max8997-private.h>
-#include <linux/regmap.h>
-
-static const u8 max8997_mask_reg[] = {
-	[PMIC_INT1] = MAX8997_REG_INT1MSK,
-	[PMIC_INT2] = MAX8997_REG_INT2MSK,
-	[PMIC_INT3] = MAX8997_REG_INT3MSK,
-	[PMIC_INT4] = MAX8997_REG_INT4MSK,
-	[FUEL_GAUGE] = MAX8997_REG_INVALID,
-	[MUIC_INT1] = MAX8997_MUIC_REG_INTMASK1,
-	[MUIC_INT2] = MAX8997_MUIC_REG_INTMASK2,
-	[MUIC_INT3] = MAX8997_MUIC_REG_INTMASK3,
-	[GPIO_LOW] = MAX8997_REG_INVALID,
-	[GPIO_HI] = MAX8997_REG_INVALID,
-	[FLASH_STATUS] = MAX8997_REG_INVALID,
-};
-
-struct max8997_irq_data {
-	int mask;
-	enum max8997_irq_source group;
-};
-
-#define DECLARE_IRQ(idx, _group, _mask)		\
-	[(idx)] = { .group = (_group), .mask = (_mask) }
-static const struct max8997_irq_data max8997_irqs[] = {
-	DECLARE_IRQ(MAX8997_PMICIRQ_PWRONR,	PMIC_INT1, 1 << 0),
-	DECLARE_IRQ(MAX8997_PMICIRQ_PWRONF,	PMIC_INT1, 1 << 1),
-	DECLARE_IRQ(MAX8997_PMICIRQ_PWRON1SEC,	PMIC_INT1, 1 << 3),
-	DECLARE_IRQ(MAX8997_PMICIRQ_JIGONR,	PMIC_INT1, 1 << 4),
-	DECLARE_IRQ(MAX8997_PMICIRQ_JIGONF,	PMIC_INT1, 1 << 5),
-	DECLARE_IRQ(MAX8997_PMICIRQ_LOWBAT2,	PMIC_INT1, 1 << 6),
-	DECLARE_IRQ(MAX8997_PMICIRQ_LOWBAT1,	PMIC_INT1, 1 << 7),
-
-	DECLARE_IRQ(MAX8997_PMICIRQ_JIGR,	PMIC_INT2, 1 << 0),
-	DECLARE_IRQ(MAX8997_PMICIRQ_JIGF,	PMIC_INT2, 1 << 1),
-	DECLARE_IRQ(MAX8997_PMICIRQ_MR,		PMIC_INT2, 1 << 2),
-	DECLARE_IRQ(MAX8997_PMICIRQ_DVS1OK,	PMIC_INT2, 1 << 3),
-	DECLARE_IRQ(MAX8997_PMICIRQ_DVS2OK,	PMIC_INT2, 1 << 4),
-	DECLARE_IRQ(MAX8997_PMICIRQ_DVS3OK,	PMIC_INT2, 1 << 5),
-	DECLARE_IRQ(MAX8997_PMICIRQ_DVS4OK,	PMIC_INT2, 1 << 6),
-
-	DECLARE_IRQ(MAX8997_PMICIRQ_CHGINS,	PMIC_INT3, 1 << 0),
-	DECLARE_IRQ(MAX8997_PMICIRQ_CHGRM,	PMIC_INT3, 1 << 1),
-	DECLARE_IRQ(MAX8997_PMICIRQ_DCINOVP,	PMIC_INT3, 1 << 2),
-	DECLARE_IRQ(MAX8997_PMICIRQ_TOPOFFR,	PMIC_INT3, 1 << 3),
-	DECLARE_IRQ(MAX8997_PMICIRQ_CHGRSTF,	PMIC_INT3, 1 << 5),
-	DECLARE_IRQ(MAX8997_PMICIRQ_MBCHGTMEXPD,	PMIC_INT3, 1 << 7),
-
-	DECLARE_IRQ(MAX8997_PMICIRQ_RTC60S,	PMIC_INT4, 1 << 0),
-	DECLARE_IRQ(MAX8997_PMICIRQ_RTCA1,	PMIC_INT4, 1 << 1),
-	DECLARE_IRQ(MAX8997_PMICIRQ_RTCA2,	PMIC_INT4, 1 << 2),
-	DECLARE_IRQ(MAX8997_PMICIRQ_SMPL_INT,	PMIC_INT4, 1 << 3),
-	DECLARE_IRQ(MAX8997_PMICIRQ_RTC1S,	PMIC_INT4, 1 << 4),
-	DECLARE_IRQ(MAX8997_PMICIRQ_WTSR,	PMIC_INT4, 1 << 5),
-
-	DECLARE_IRQ(MAX8997_MUICIRQ_ADCError,	MUIC_INT1, 1 << 2),
-	DECLARE_IRQ(MAX8997_MUICIRQ_ADCLow,	MUIC_INT1, 1 << 1),
-	DECLARE_IRQ(MAX8997_MUICIRQ_ADC,	MUIC_INT1, 1 << 0),
-
-	DECLARE_IRQ(MAX8997_MUICIRQ_VBVolt,	MUIC_INT2, 1 << 4),
-	DECLARE_IRQ(MAX8997_MUICIRQ_DBChg,	MUIC_INT2, 1 << 3),
-	DECLARE_IRQ(MAX8997_MUICIRQ_DCDTmr,	MUIC_INT2, 1 << 2),
-	DECLARE_IRQ(MAX8997_MUICIRQ_ChgDetRun,	MUIC_INT2, 1 << 1),
-	DECLARE_IRQ(MAX8997_MUICIRQ_ChgTyp,	MUIC_INT2, 1 << 0),
-
-	DECLARE_IRQ(MAX8997_MUICIRQ_OVP,	MUIC_INT3, 1 << 2),
-};
-
-static void max8997_irq_lock(struct irq_data *data)
-{
-	struct max8997_dev *max8997 = irq_data_get_irq_chip_data(data);
-
-	mutex_lock(&max8997->irqlock);
-}
-
-static void max8997_irq_sync_unlock(struct irq_data *data)
-{
-	struct max8997_dev *max8997 = irq_data_get_irq_chip_data(data);
-	int i;
-
-	for (i = 0; i < MAX8997_IRQ_GROUP_NR; i++) {
-		struct regmap *map;
-		u8 mask_reg = max8997_mask_reg[i];
-
-		if (i >= MUIC_INT1 && i <= MUIC_INT3)
-			map = max8997->regmap_muic;
-		else
-			map = max8997->regmap;
-
-		if (mask_reg == MAX8997_REG_INVALID ||
-				IS_ERR_OR_NULL(map))
-			continue;
-		max8997->irq_masks_cache[i] = max8997->irq_masks_cur[i];
-
-		regmap_write(map, max8997_mask_reg[i],
-				max8997->irq_masks_cur[i]);
-	}
-
-	mutex_unlock(&max8997->irqlock);
-}
-
-static const inline struct max8997_irq_data *
-irq_to_max8997_irq(struct max8997_dev *max8997, struct irq_data *data)
-{
-	return &max8997_irqs[data->hwirq];
-}
-
-static void max8997_irq_mask(struct irq_data *data)
-{
-	struct max8997_dev *max8997 = irq_data_get_irq_chip_data(data);
-	const struct max8997_irq_data *irq_data = irq_to_max8997_irq(max8997,
-								     data);
-
-	max8997->irq_masks_cur[irq_data->group] |= irq_data->mask;
-}
-
-static void max8997_irq_unmask(struct irq_data *data)
-{
-	struct max8997_dev *max8997 = irq_data_get_irq_chip_data(data);
-	const struct max8997_irq_data *irq_data = irq_to_max8997_irq(max8997,
-								     data);
-
-	max8997->irq_masks_cur[irq_data->group] &= ~irq_data->mask;
-}
-
-static struct irq_chip max8997_irq_chip = {
-	.name			= "max8997",
-	.irq_bus_lock		= max8997_irq_lock,
-	.irq_bus_sync_unlock	= max8997_irq_sync_unlock,
-	.irq_mask		= max8997_irq_mask,
-	.irq_unmask		= max8997_irq_unmask,
-};
-
-#define MAX8997_IRQSRC_PMIC		(1 << 1)
-#define MAX8997_IRQSRC_FUELGAUGE	(1 << 2)
-#define MAX8997_IRQSRC_MUIC		(1 << 3)
-#define MAX8997_IRQSRC_GPIO		(1 << 4)
-#define MAX8997_IRQSRC_FLASH		(1 << 5)
-static irqreturn_t max8997_irq_thread(int irq, void *data)
-{
-	struct max8997_dev *max8997 = data;
-	u8 irq_reg[MAX8997_IRQ_GROUP_NR] = {};
-	unsigned int irq_src;
-	int ret;
-	int i, cur_irq;
-
-	ret = regmap_read(max8997->regmap, MAX8997_REG_INTSRC, &irq_src);
-	if (ret < 0) {
-		dev_err(max8997->dev, "Failed to read interrupt source: %d\n",
-				ret);
-		return IRQ_NONE;
-	}
-
-	if (irq_src & MAX8997_IRQSRC_PMIC) {
-		/* PMIC INT1 ~ INT4 */
-		regmap_bulk_read(max8997->regmap, MAX8997_REG_INT1,
-				&irq_reg[PMIC_INT1], 4);
-	}
-	if (irq_src & MAX8997_IRQSRC_FUELGAUGE) {
-		/*
-		 * TODO: FUEL GAUGE
-		 *
-		 * This is to be supported by Max17042 driver. When
-		 * an interrupt incurs here, it should be relayed to a
-		 * Max17042 device that is connected (probably by
-		 * platform-data). However, we do not have interrupt
-		 * handling in Max17042 driver currently. The Max17042 IRQ
-		 * driver should be ready to be used as a stand-alone device and
-		 * a Max8997-dependent device. Because it is not ready in
-		 * Max17042-side and it is not too critical in operating
-		 * Max8997, we do not implement this in initial releases.
-		 */
-		irq_reg[FUEL_GAUGE] = 0;
-	}
-	if (irq_src & MAX8997_IRQSRC_MUIC) {
-		/* MUIC INT1 ~ INT3 */
-		regmap_bulk_read(max8997->regmap_muic, MAX8997_MUIC_REG_INT1,
-				&irq_reg[MUIC_INT1], 3);
-	}
-	if (irq_src & MAX8997_IRQSRC_GPIO) {
-		/* GPIO Interrupt */
-		u8 gpio_info[MAX8997_NUM_GPIO];
-
-		irq_reg[GPIO_LOW] = 0;
-		irq_reg[GPIO_HI] = 0;
-
-		regmap_bulk_read(max8997->regmap, MAX8997_REG_GPIOCNTL1,
-				gpio_info, MAX8997_NUM_GPIO);
-		for (i = 0; i < MAX8997_NUM_GPIO; i++) {
-			bool interrupt = false;
-
-			switch (gpio_info[i] & MAX8997_GPIO_INT_MASK) {
-			case MAX8997_GPIO_INT_BOTH:
-				if (max8997->gpio_status[i] != gpio_info[i])
-					interrupt = true;
-				break;
-			case MAX8997_GPIO_INT_RISE:
-				if ((max8997->gpio_status[i] != gpio_info[i]) &&
-				    (gpio_info[i] & MAX8997_GPIO_DATA_MASK))
-					interrupt = true;
-				break;
-			case MAX8997_GPIO_INT_FALL:
-				if ((max8997->gpio_status[i] != gpio_info[i]) &&
-				    !(gpio_info[i] & MAX8997_GPIO_DATA_MASK))
-					interrupt = true;
-				break;
-			default:
-				break;
-			}
-
-			if (interrupt) {
-				if (i < 8)
-					irq_reg[GPIO_LOW] |= (1 << i);
-				else
-					irq_reg[GPIO_HI] |= (1 << (i - 8));
-			}
-
-		}
-	}
-	if (irq_src & MAX8997_IRQSRC_FLASH) {
-		/* Flash Status Interrupt */
-		unsigned int data;
-		ret = regmap_read(max8997->regmap,
-				MAX8997_REG_FLASHSTATUS, &data);
-		irq_reg[FLASH_STATUS] = data;
-	}
-
-	/* Apply masking */
-	for (i = 0; i < MAX8997_IRQ_GROUP_NR; i++)
-		irq_reg[i] &= ~max8997->irq_masks_cur[i];
-
-	/* Report */
-	for (i = 0; i < MAX8997_IRQ_NR; i++) {
-		if (irq_reg[max8997_irqs[i].group] & max8997_irqs[i].mask) {
-			cur_irq = irq_find_mapping(max8997->irq_domain, i);
-			if (cur_irq)
-				handle_nested_irq(cur_irq);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-int max8997_irq_resume(struct max8997_dev *max8997)
-{
-	if (max8997->irq && max8997->irq_domain)
-		max8997_irq_thread(0, max8997);
-	return 0;
-}
-
-static int max8997_irq_domain_map(struct irq_domain *d, unsigned int irq,
-					irq_hw_number_t hw)
-{
-	struct max8997_dev *max8997 = d->host_data;
-
-	irq_set_chip_data(irq, max8997);
-	irq_set_chip_and_handler(irq, &max8997_irq_chip, handle_edge_irq);
-	irq_set_nested_thread(irq, 1);
-	irq_set_noprobe(irq);
-
-	return 0;
-}
-
-static const struct irq_domain_ops max8997_irq_domain_ops = {
-	.map = max8997_irq_domain_map,
-};
-
-int max8997_irq_init(struct max8997_dev *max8997)
-{
-	struct irq_domain *domain;
-	int i;
-	int ret;
-	unsigned int val;
-
-	if (!max8997->irq) {
-		dev_warn(max8997->dev, "No interrupt specified.\n");
-		return 0;
-	}
-
-	mutex_init(&max8997->irqlock);
-
-	/* Mask individual interrupt sources */
-	for (i = 0; i < MAX8997_IRQ_GROUP_NR; i++) {
-		max8997->irq_masks_cur[i] = 0xff;
-		max8997->irq_masks_cache[i] = 0xff;
-
-		if (IS_ERR_OR_NULL(max8997->regmap))
-			continue;
-		if (max8997_mask_reg[i] == MAX8997_REG_INVALID)
-			continue;
-
-		regmap_write(max8997->regmap, max8997_mask_reg[i], 0xff);
-	}
-
-	for (i = 0; i < MAX8997_NUM_GPIO; i++) {
-		max8997->gpio_status[i] = (regmap_read(max8997->regmap,
-						MAX8997_REG_GPIOCNTL1 + i,
-						&val)
-					& MAX8997_GPIO_DATA_MASK) ?
-					true : false;
-	}
-
-	domain = irq_domain_add_linear(NULL, MAX8997_IRQ_NR,
-					&max8997_irq_domain_ops, max8997);
-	if (!domain) {
-		dev_err(max8997->dev, "could not create irq domain\n");
-		return -ENODEV;
-	}
-	max8997->irq_domain = domain;
-
-	ret = request_threaded_irq(max8997->irq, NULL, max8997_irq_thread,
-			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-			"max8997-irq", max8997);
-
-	if (ret) {
-		dev_err(max8997->dev, "Failed to request IRQ %d: %d\n",
-				max8997->irq, ret);
-		return ret;
-	}
-
-	if (!max8997->ono)
-		return 0;
-
-	ret = request_threaded_irq(max8997->ono, NULL, max8997_irq_thread,
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
-			IRQF_ONESHOT, "max8997-ono", max8997);
-
-	if (ret)
-		dev_err(max8997->dev, "Failed to request ono-IRQ %d: %d\n",
-				max8997->ono, ret);
-
-	return 0;
-}
-
-void max8997_irq_exit(struct max8997_dev *max8997)
-{
-	if (max8997->ono)
-		free_irq(max8997->ono, max8997);
-
-	if (max8997->irq)
-		free_irq(max8997->irq, max8997);
-}
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index f1c82110b2ab..932e22c05026 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -65,6 +65,49 @@ static const struct regmap_config max8997_regmap_config = {
 	.max_register = MAX8997_REG_PMIC_END,
 };
 
+static const struct regmap_irq max8997_irqs[] = {
+	/* PMIC_INT1 interrupts */
+	{ .reg_offset = 0, .mask = PMIC_INT1_PWRONR_MASK, },
+	{ .reg_offset = 0, .mask = PMIC_INT1_PWRONF_MASK, },
+	{ .reg_offset = 0, .mask = PMIC_INT1_PWRON1SEC_MASK, },
+	{ .reg_offset = 0, .mask = PMIC_INT1_JIGONR_MASK, },
+	{ .reg_offset = 0, .mask = PMIC_INT1_JIGONF_MASK, },
+	{ .reg_offset = 0, .mask = PMIC_INT1_LOWBAT2_MASK, },
+	{ .reg_offset = 0, .mask = PMIC_INT1_LOWBAT1_MASK, },
+	/* PMIC_INT2 interrupts */
+	{ .reg_offset = 1, .mask = PMIC_INT2_JIGR_MASK, },
+	{ .reg_offset = 1, .mask = PMIC_INT2_JIGF_MASK, },
+	{ .reg_offset = 1, .mask = PMIC_INT2_MR_MASK, },
+	{ .reg_offset = 1, .mask = PMIC_INT2_DVS1OK_MASK, },
+	{ .reg_offset = 1, .mask = PMIC_INT2_DVS2OK_MASK, },
+	{ .reg_offset = 1, .mask = PMIC_INT2_DVS3OK_MASK, },
+	{ .reg_offset = 1, .mask = PMIC_INT2_DVS4OK_MASK, },
+	/* PMIC_INT3 interrupts */
+	{ .reg_offset = 2, .mask = PMIC_INT3_CHGINS_MASK, },
+	{ .reg_offset = 2, .mask = PMIC_INT3_CHGRM_MASK, },
+	{ .reg_offset = 2, .mask = PMIC_INT3_DCINOVP_MASK, },
+	{ .reg_offset = 2, .mask = PMIC_INT3_TOPOFFR_MASK, },
+	{ .reg_offset = 2, .mask = PMIC_INT3_CHGRSTF_MASK, },
+	{ .reg_offset = 2, .mask = PMIC_INT3_MBCHGTMEXPD_MASK, },
+	/* PMIC_INT4 interrupts */
+	{ .reg_offset = 3, .mask = PMIC_INT4_RTC60S_MASK, },
+	{ .reg_offset = 3, .mask = PMIC_INT4_RTCA1_MASK, },
+	{ .reg_offset = 3, .mask = PMIC_INT4_RTCA2_MASK, },
+	{ .reg_offset = 3, .mask = PMIC_INT4_SMPL_INT_MASK, },
+	{ .reg_offset = 3, .mask = PMIC_INT4_RTC1S_MASK, },
+	{ .reg_offset = 3, .mask = PMIC_INT4_WTSR_MASK, },
+};
+
+static const struct regmap_irq_chip max8997_irq_chip = {
+	.name			= "max8997",
+	.status_base		= MAX8997_REG_INT1,
+	.mask_base		= MAX8997_REG_INT1MSK,
+	.mask_invert		= false,
+	.num_regs		= 4,
+	.irqs			= max8997_irqs,
+	.num_irqs		= ARRAY_SIZE(max8997_irqs),
+};
+
 static const struct regmap_config max8997_regmap_rtc_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -83,6 +126,31 @@ static const struct regmap_config max8997_regmap_muic_config = {
 	.max_register = MAX8997_MUIC_REG_END,
 };
 
+static const struct regmap_irq max8997_irqs_muic[] = {
+	/* MUIC_INT1 interrupts */
+	{ .reg_offset = 0, .mask = MUIC_INT1_ADC_MASK, },
+	{ .reg_offset = 0, .mask = MUIC_INT1_ADCLOW_MASK, },
+	{ .reg_offset = 0, .mask = MUIC_INT1_ADCERROR_MASK, },
+	/* MUIC_INT2 interrupts */
+	{ .reg_offset = 1, .mask = MUIC_INT2_CHGTYP_MASK, },
+	{ .reg_offset = 1, .mask = MUIC_INT2_CHGDETRUN_MASK, },
+	{ .reg_offset = 1, .mask = MUIC_INT2_DCDTMR_MASK, },
+	{ .reg_offset = 1, .mask = MUIC_INT2_DBCHG_MASK, },
+	{ .reg_offset = 1, .mask = MUIC_INT2_VBVOLT_MASK, },
+	/* MUIC_INT3 interrupts */
+	{ .reg_offset = 2, .mask = MUIC_INT3_OVP_MASK, },
+};
+
+static const struct regmap_irq_chip max8997_irq_chip_muic = {
+	.name			= "max8997-muic",
+	.status_base		= MAX8997_MUIC_REG_INT1,
+	.mask_base		= MAX8997_MUIC_REG_INTMASK1,
+	.mask_invert		= true,
+	.num_regs		= 3,
+	.irqs			= max8997_irqs_muic,
+	.num_irqs		= ARRAY_SIZE(max8997_irqs_muic),
+};
+
 /*
  * Only the common platform data elements for max8997 are parsed here from the
  * device tree. Other sub-modules of max8997 such as pmic, rtc and others have
@@ -215,9 +283,26 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
 		goto err_regmap;
 	}
 
-	pm_runtime_set_active(max8997->dev);
+	ret = regmap_add_irq_chip(max8997->regmap, max8997->irq,
+				IRQF_ONESHOT | IRQF_SHARED |
+				IRQF_TRIGGER_FALLING, 0,
+				&max8997_irq_chip, &max8997->irq_data);
+	if (ret) {
+		dev_err(max8997->dev, "failed to add irq chip: %d\n", ret);
+		goto err_regmap;
+	}
 
-	max8997_irq_init(max8997);
+	ret = regmap_add_irq_chip(max8997->regmap_muic, max8997->irq,
+				IRQF_ONESHOT | IRQF_SHARED |
+				IRQF_TRIGGER_FALLING, 0,
+				&max8997_irq_chip_muic,
+				&max8997->irq_data_muic);
+	if (ret) {
+		dev_err(max8997->dev, "failed to add irq chip: %d\n", ret);
+		goto err_irq_muic;
+	}
+
+	pm_runtime_set_active(max8997->dev);
 
 	ret = mfd_add_devices(max8997->dev, -1, max8997_devs,
 			ARRAY_SIZE(max8997_devs),
@@ -239,6 +324,9 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
 
 err_mfd:
 	mfd_remove_devices(max8997->dev);
+	regmap_del_irq_chip(max8997->irq, max8997->irq_data_muic);
+err_irq_muic:
+	regmap_del_irq_chip(max8997->irq, max8997->irq_data);
 err_regmap:
 	i2c_unregister_device(max8997->muic);
 err_i2c_muic:
@@ -253,6 +341,10 @@ static int max8997_i2c_remove(struct i2c_client *i2c)
 	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
 
 	mfd_remove_devices(max8997->dev);
+
+	regmap_del_irq_chip(max8997->irq, max8997->irq_data_muic);
+	regmap_del_irq_chip(max8997->irq, max8997->irq_data);
+
 	i2c_unregister_device(max8997->muic);
 	i2c_unregister_device(max8997->haptic);
 	i2c_unregister_device(max8997->rtc);
@@ -469,8 +561,11 @@ static int max8997_suspend(struct device *dev)
 	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
 
-	if (device_may_wakeup(dev))
-		irq_set_irq_wake(max8997->irq, 1);
+	if (device_may_wakeup(dev)) {
+		enable_irq_wake(max8997->irq);
+		disable_irq(max8997->irq);
+	}
+
 	return 0;
 }
 
@@ -479,9 +574,12 @@ static int max8997_resume(struct device *dev)
 	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
 
-	if (device_may_wakeup(dev))
-		irq_set_irq_wake(max8997->irq, 0);
-	return max8997_irq_resume(max8997);
+	if (device_may_wakeup(dev)) {
+		disable_irq_wake(max8997->irq);
+		enable_irq(max8997->irq);
+	}
+
+	return 0;
 }
 
 static const struct dev_pm_ops max8997_pm = {
diff --git a/drivers/rtc/rtc-max8997.c b/drivers/rtc/rtc-max8997.c
index d017a34a9f70..4998aee0f07f 100644
--- a/drivers/rtc/rtc-max8997.c
+++ b/drivers/rtc/rtc-max8997.c
@@ -496,7 +496,7 @@ static int max8997_rtc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	virq = irq_create_mapping(max8997->irq_domain, MAX8997_PMICIRQ_RTCA1);
+	virq = regmap_irq_get_virq(max8997->irq_data, MAX8997_PMICIRQ_RTCA1);
 	if (!virq) {
 		dev_err(&pdev->dev, "Failed to create mapping alarm IRQ\n");
 		ret = -ENXIO;
diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h
index ea80ef80dbf8..f42ea222988f 100644
--- a/include/linux/mfd/max8997-private.h
+++ b/include/linux/mfd/max8997-private.h
@@ -333,6 +333,48 @@ enum max8997_irq_source {
 	MAX8997_IRQ_GROUP_NR,
 };
 
+#define PMIC_INT1_PWRONR_MASK		(0x1 << 0)
+#define PMIC_INT1_PWRONF_MASK		(0x1 << 1)
+#define PMIC_INT1_PWRON1SEC_MASK	(0x1 << 3)
+#define PMIC_INT1_JIGONR_MASK		(0x1 << 4)
+#define PMIC_INT1_JIGONF_MASK		(0x1 << 5)
+#define PMIC_INT1_LOWBAT2_MASK		(0x1 << 6)
+#define PMIC_INT1_LOWBAT1_MASK		(0x1 << 7)
+
+#define PMIC_INT2_JIGR_MASK		(0x1 << 0)
+#define PMIC_INT2_JIGF_MASK		(0x1 << 1)
+#define PMIC_INT2_MR_MASK		(0x1 << 2)
+#define PMIC_INT2_DVS1OK_MASK		(0x1 << 3)
+#define PMIC_INT2_DVS2OK_MASK		(0x1 << 4)
+#define PMIC_INT2_DVS3OK_MASK		(0x1 << 5)
+#define PMIC_INT2_DVS4OK_MASK		(0x1 << 6)
+
+#define PMIC_INT3_CHGINS_MASK		(0x1 << 0)
+#define PMIC_INT3_CHGRM_MASK		(0x1 << 1)
+#define PMIC_INT3_DCINOVP_MASK		(0x1 << 2)
+#define PMIC_INT3_TOPOFFR_MASK		(0x1 << 3)
+#define PMIC_INT3_CHGRSTF_MASK		(0x1 << 5)
+#define PMIC_INT3_MBCHGTMEXPD_MASK	(0x1 << 7)
+
+#define PMIC_INT4_RTC60S_MASK		(0x1 << 0)
+#define PMIC_INT4_RTCA1_MASK		(0x1 << 1)
+#define PMIC_INT4_RTCA2_MASK		(0x1 << 2)
+#define PMIC_INT4_SMPL_INT_MASK		(0x1 << 3)
+#define PMIC_INT4_RTC1S_MASK		(0x1 << 4)
+#define PMIC_INT4_WTSR_MASK		(0x1 << 5)
+
+#define MUIC_INT1_ADC_MASK		(0x1 << 0)
+#define MUIC_INT1_ADCLOW_MASK		(0x1 << 1)
+#define MUIC_INT1_ADCERROR_MASK		(0x1 << 2)
+
+#define MUIC_INT2_CHGTYP_MASK		(0x1 << 0)
+#define MUIC_INT2_CHGDETRUN_MASK	(0x1 << 1)
+#define MUIC_INT2_DCDTMR_MASK		(0x1 << 2)
+#define MUIC_INT2_DBCHG_MASK		(0x1 << 3)
+#define MUIC_INT2_VBVOLT_MASK		(0x1 << 4)
+
+#define MUIC_INT3_OVP_MASK		(0x1 << 2)
+
 enum max8997_irq {
 	MAX8997_PMICIRQ_PWRONR,
 	MAX8997_PMICIRQ_PWRONF,
@@ -364,19 +406,23 @@ enum max8997_irq {
 	MAX8997_PMICIRQ_RTC1S,
 	MAX8997_PMICIRQ_WTSR,
 
-	MAX8997_MUICIRQ_ADCError,
-	MAX8997_MUICIRQ_ADCLow,
+	MAX8997_PMICIRQ_NR,
+};
+
+enum max8997_irq_muic {
 	MAX8997_MUICIRQ_ADC,
+	MAX8997_MUICIRQ_ADCLow,
+	MAX8997_MUICIRQ_ADCError,
 
-	MAX8997_MUICIRQ_VBVolt,
-	MAX8997_MUICIRQ_DBChg,
-	MAX8997_MUICIRQ_DCDTmr,
-	MAX8997_MUICIRQ_ChgDetRun,
 	MAX8997_MUICIRQ_ChgTyp,
+	MAX8997_MUICIRQ_ChgDetRun,
+	MAX8997_MUICIRQ_DCDTmr,
+	MAX8997_MUICIRQ_DBChg,
+	MAX8997_MUICIRQ_VBVolt,
 
 	MAX8997_MUICIRQ_OVP,
 
-	MAX8997_IRQ_NR,
+	MAX8997_MUCIRQ_NR,
 };
 
 #define MAX8997_NUM_GPIO	12
@@ -397,9 +443,10 @@ struct max8997_dev {
 	struct regmap *regmap_haptic;
 	struct regmap *regmap_muic;
 
+	struct regmap_irq_chip_data *irq_data;
+	struct regmap_irq_chip_data *irq_data_muic;
 	int irq;
 	int ono;
-	struct irq_domain *irq_domain;
 	struct mutex irqlock;
 	int irq_masks_cur[MAX8997_IRQ_GROUP_NR];
 	int irq_masks_cache[MAX8997_IRQ_GROUP_NR];
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1424700 — [RESEND v7 6/6] extcon: max8997: Fix inconsistent indenting

Fix smatch warning:
	max8997_muic_probe() warn: inconsistent indenting

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/extcon/extcon-max8997.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index 0afa3e8b5dc3..cf8de5be2405 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -737,7 +737,7 @@ static int max8997_muic_probe(struct platform_device *pdev)
 	}
 
 	/* Set initial path for UART */
-	 max8997_muic_set_path(info, info->path_uart, true);
+	max8997_muic_set_path(info, info->path_uart, true);
 
 	/* Set ADC debounce time */
 	max8997_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1424701 — [RESEND v7 3/6] mfd: max8997: Change irq names to upper case

From: Robert Baldyga <r.baldyga@samsung.com>

This patch changes naming convention of MUIC interrupts form CamelCase
to upper case. It makes names more readable and consistent with another
interrupt names in max8997 driver.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[k.kozlowski: Collect acks, rebase on v4.6-rc6]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/extcon/extcon-max8997.c     | 32 ++++++++++++++++----------------
 include/linux/mfd/max8997-private.h | 16 ++++++++--------
 2 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index 9d27cc23038f..68754ac2c8ea 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -46,15 +46,15 @@ struct max8997_muic_irq {
 };
 
 static struct max8997_muic_irq muic_irqs[] = {
-	{ MAX8997_MUICIRQ_ADCError,	"muic-ADCERROR" },
-	{ MAX8997_MUICIRQ_ADCLow,	"muic-ADCLOW" },
-	{ MAX8997_MUICIRQ_ADC,		"muic-ADC" },
-	{ MAX8997_MUICIRQ_VBVolt,	"muic-VBVOLT" },
-	{ MAX8997_MUICIRQ_DBChg,	"muic-DBCHG" },
-	{ MAX8997_MUICIRQ_DCDTmr,	"muic-DCDTMR" },
-	{ MAX8997_MUICIRQ_ChgDetRun,	"muic-CHGDETRUN" },
-	{ MAX8997_MUICIRQ_ChgTyp,	"muic-CHGTYP" },
-	{ MAX8997_MUICIRQ_OVP,		"muic-OVP" },
+	{ MAX8997_MUICIRQ_ADCERROR,	"MUIC-ADCERROR" },
+	{ MAX8997_MUICIRQ_ADCLOW,	"MUIC-ADCLOW" },
+	{ MAX8997_MUICIRQ_ADC,		"MUIC-ADC" },
+	{ MAX8997_MUICIRQ_VBVOLT,	"MUIC-VBVOLT" },
+	{ MAX8997_MUICIRQ_DBCHG,	"MUIC-DBCHG" },
+	{ MAX8997_MUICIRQ_DCDTMR,	"MUIC-DCDTMR" },
+	{ MAX8997_MUICIRQ_CHGDETRUN,	"MUIC-CHGDETRUN" },
+	{ MAX8997_MUICIRQ_CHGTYP,	"MUIC-CHGTYP" },
+	{ MAX8997_MUICIRQ_OVP,		"MUIC-OVP" },
 };
 
 /* Define supported cable type */
@@ -540,17 +540,17 @@ static void max8997_muic_irq_work(struct work_struct *work)
 	}
 
 	switch (irq_type) {
-	case MAX8997_MUICIRQ_ADCError:
-	case MAX8997_MUICIRQ_ADCLow:
+	case MAX8997_MUICIRQ_ADCERROR:
+	case MAX8997_MUICIRQ_ADCLOW:
 	case MAX8997_MUICIRQ_ADC:
 		/* Handle all of cable except for charger cable */
 		ret = max8997_muic_adc_handler(info);
 		break;
-	case MAX8997_MUICIRQ_VBVolt:
-	case MAX8997_MUICIRQ_DBChg:
-	case MAX8997_MUICIRQ_DCDTmr:
-	case MAX8997_MUICIRQ_ChgDetRun:
-	case MAX8997_MUICIRQ_ChgTyp:
+	case MAX8997_MUICIRQ_VBVOLT:
+	case MAX8997_MUICIRQ_DBCHG:
+	case MAX8997_MUICIRQ_DCDTMR:
+	case MAX8997_MUICIRQ_CHGDETRUN:
+	case MAX8997_MUICIRQ_CHGTYP:
 		/* Handle charger cable */
 		ret = max8997_muic_chg_handler(info);
 		break;
diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h
index f42ea222988f..2817fa69383e 100644
--- a/include/linux/mfd/max8997-private.h
+++ b/include/linux/mfd/max8997-private.h
@@ -411,14 +411,14 @@ enum max8997_irq {
 
 enum max8997_irq_muic {
 	MAX8997_MUICIRQ_ADC,
-	MAX8997_MUICIRQ_ADCLow,
-	MAX8997_MUICIRQ_ADCError,
-
-	MAX8997_MUICIRQ_ChgTyp,
-	MAX8997_MUICIRQ_ChgDetRun,
-	MAX8997_MUICIRQ_DCDTmr,
-	MAX8997_MUICIRQ_DBChg,
-	MAX8997_MUICIRQ_VBVolt,
+	MAX8997_MUICIRQ_ADCLOW,
+	MAX8997_MUICIRQ_ADCERROR,
+
+	MAX8997_MUICIRQ_CHGTYP,
+	MAX8997_MUICIRQ_CHGDETRUN,
+	MAX8997_MUICIRQ_DCDTMR,
+	MAX8997_MUICIRQ_DBCHG,
+	MAX8997_MUICIRQ_VBVOLT,
 
 	MAX8997_MUICIRQ_OVP,
 
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1425056 — Re: [RESEND v7 1/6] mfd: max8997: Use regmap to access registers

[Multipart message — attachments visible in raw view] — view raw

On Fri, Jun 17, 2016 at 08:10:28AM +0200, Krzysztof Kozlowski wrote:

>  drivers/extcon/extcon-max8997.c       |  31 ++++----
>  drivers/input/misc/max8997_haptic.c   |  34 ++++----
>  drivers/leds/leds-max8997.c           |  13 ++--
>  drivers/mfd/Kconfig                   |   1 +
>  drivers/mfd/max8997-irq.c             |  64 ++++++---------
>  drivers/mfd/max8997.c                 | 141 +++++++++++++++-------------------
>  drivers/power/max8997_charger.c       |  33 ++++----
>  drivers/regulator/max8997-regulator.c |  87 ++++++++++-----------
>  drivers/rtc/rtc-max8997.c             |  56 ++++++++------
>  include/linux/mfd/max8997-private.h   |  17 ++--
>  10 files changed, 228 insertions(+), 249 deletions(-)

This is doing two things at once - it's changing the I/O mechanism over
to regmap and updating all the client drivers in a single commit.
Conversions like this are normally done by first converting the
driver-specific I/O functions to use regmap internally and then
subsequently updating the individual client drivers (if that's even
useful, sometimes people don't bother as the static inlines you
usually end up with in the header are not a real cost).  This makes for
a set of smaller, more focused patches which are easier to get reviewed.

As it is due to the subject line not looking at all relevant and these
Maxim PMIC drivers generating an awful lot of resends this is the first
time I actually looked at this enough to notice there's any regulator
code, I suspect I've either deleted older versions unread or scanned
the commit message and not seen that there was a regulator change.  I
only saw it at all because it was mentioned to me on IRC and a copy
forwarded on to me.

> @@ -464,15 +449,15 @@ static int max8997_restore(struct device *dev)
>  	int i;
>  
>  	for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_pmic); i++)
> -		max8997_write_reg(i2c, max8997_dumpaddr_pmic[i],
> +		regmap_write(max8997->regmap, max8997_dumpaddr_pmic[i],
>  				max8997->reg_dump[i]);
>  

Looks like a conversion to regcache is also useful but that can be done
as a followup.

> @@ -257,15 +258,14 @@ static int max8997_get_enable_register(struct regulator_dev *rdev,
>  static int max8997_reg_is_enabled(struct regulator_dev *rdev)
>  {
>  	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> -	struct i2c_client *i2c = max8997->iodev->i2c;
>  	int ret, reg, mask, pattern;
> -	u8 val;
> +	unsigned int val;
>  
>  	ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
>  	if (ret)
>  		return ret;
>  
> -	ret = max8997_read_reg(i2c, reg, &val);
> +	ret = regmap_read(max8997->iodev->regmap, reg, &val);
>  	if (ret)
>  		return ret;
>  

A proper regmap conversion of this driver would be to convert the
driver to use the core regmap operations and remove all the driver
specific code.  It's a step in the right direction but it's making a
bunch of code that's obviously problematic so it's hard to get
enthusiastic.  

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web