Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1424047 > unrolled thread

Re: [PATCH V7 3/3] soc/tegra: pmc: Add support for IO pads power state and voltage

Started byLaxman Dewangan <ldewangan@nvidia.com>
First post2016-06-16 15:30 +0200
Last post2016-06-16 15:30 +0200
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  Re: [PATCH V7 3/3] soc/tegra: pmc: Add support for IO pads power  state and voltage Laxman Dewangan <ldewangan@nvidia.com> - 2016-06-16 15:30 +0200

#1424047 — Re: [PATCH V7 3/3] soc/tegra: pmc: Add support for IO pads power state and voltage

FromLaxman Dewangan <ldewangan@nvidia.com>
Date2016-06-16 15:30 +0200
SubjectRe: [PATCH V7 3/3] soc/tegra: pmc: Add support for IO pads power state and voltage
Message-ID<rKFwS-sD-9@gated-at.bofh.it>
Hi Thierry,

On Tuesday 24 May 2016 04:18 PM, Jon Hunter wrote:
> On 23/05/16 10:03, Jon Hunter wrote:
>> On 20/05/16 15:45, Laxman Dewangan wrote:
>>> The IO pins of Tegra SoCs are grouped for common control of IO
>>> interface like setting voltage signal levels and power state of
>>> the interface. The group is generally referred as IO pads. The
>>> power state and voltage control of IO pins can be done at IO pads
>>> level.
>>>
>>> Tegra generation SoC supports the power down of IO pads when it
>>> is not used even in the active state of system. This saves power
>>> from that IO interface. Also it supports multiple voltage level
>>> in IO pins for interfacing on some of pads. The IO pad voltage is
>>> automatically detected till T124, hence SW need not to configure
>>> this. But from T210, the automatically detection logic has been
>>> removed, hence SW need to explicitly set the IO pad voltage into
>>> IO pad configuration registers.
>>>
>>> Add support to set the power states and voltage level of the IO pads
>>> from client driver. The implementation for the APIs are in generic
>>> which is applicable for all generation os Tegra SoC.
>>>
>>> IO pads ID and information of bit field for power state and voltage
>>> level controls are added for Tegra124, Tegra132 and Tegra210. The SOR
>>> driver is modified to use the new APIs.
>>>
>>> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>

Can you please review this?

Thanks,
Laxman

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web