Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1421745 > unrolled thread

Re: [PATCH] virtio-gpu: use src not crtc

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH] virtio-gpu: use src not crtc Marc-André Lureau <marcandre.lureau@gmail.com> - 2016-06-14 12:20 +0200
    Re: [PATCH] virtio-gpu: use src not crtc Gerd Hoffmann <kraxel@redhat.com> - 2016-06-14 15:00 +0200

#1421745 — Re: [PATCH] virtio-gpu: use src not crtc

Hi

On Tue, May 31, 2016 at 2:52 PM, Gerd Hoffmann <kraxel@redhat.com> wrote:
> Pick up the correct source rectangle from framebuffer.
> Without this multihead setups are not working correctly.
>
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>

Additionally, I had to modify the page_flip() function to take the
plane source coordinates for virgl/3d multihead to work. Feel free to
squash.

--- a/drivers/gpu/drm/virtio/virtgpu_display.c
+++ b/drivers/gpu/drm/virtio/virtgpu_display.c
@@ -68,11 +68,16 @@ static int virtio_gpu_page_flip(struct drm_crtc *crtc,
                         0, 0, NULL);
        }
        virtio_gpu_cmd_set_scanout(vgdev, output->index, handle,
-                                  crtc->mode.hdisplay,
-                                  crtc->mode.vdisplay, 0, 0);
-       virtio_gpu_cmd_resource_flush(vgdev, handle, 0, 0,
-                                     crtc->mode.hdisplay,
-                                     crtc->mode.vdisplay);
+                       plane->state->src_w >> 16,
+                       plane->state->src_h >> 16,
+                       plane->state->src_x >> 16,
+                       plane->state->src_y >> 16);
+
+       virtio_gpu_cmd_resource_flush(vgdev, handle,
+                       plane->state->src_x >> 16,
+                       plane->state->src_y >> 16,
+                       plane->state->src_w >> 16,
+                       plane->state->src_h);

> ---
>  drivers/gpu/drm/virtio/virtgpu_plane.c | 31 ++++++++++++++++++-------------
>  1 file changed, 18 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/virtio/virtgpu_plane.c b/drivers/gpu/drm/virtio/virtgpu_plane.c
> index b7778a7..925ca25 100644
> --- a/drivers/gpu/drm/virtio/virtgpu_plane.c
> +++ b/drivers/gpu/drm/virtio/virtgpu_plane.c
> @@ -85,27 +85,32 @@ static void virtio_gpu_primary_plane_update(struct drm_plane *plane,
>                 if (bo->dumb) {
>                         virtio_gpu_cmd_transfer_to_host_2d
>                                 (vgdev, handle, 0,
> -                                cpu_to_le32(plane->state->crtc_w),
> -                                cpu_to_le32(plane->state->crtc_h),
> -                                plane->state->crtc_x, plane->state->crtc_y, NULL);
> +                                cpu_to_le32(plane->state->src_w >> 16),
> +                                cpu_to_le32(plane->state->src_h >> 16),
> +                                plane->state->src_x >> 16,
> +                                plane->state->src_y >> 16, NULL);
>                 }
>         } else {
>                 handle = 0;
>         }
>
> -       DRM_DEBUG("handle 0x%x, crtc %dx%d+%d+%d\n", handle,
> +       DRM_DEBUG("handle 0x%x, crtc %dx%d+%d+%d, src %dx%d+%d+%d\n", handle,
>                   plane->state->crtc_w, plane->state->crtc_h,
> -                 plane->state->crtc_x, plane->state->crtc_y);
> +                 plane->state->crtc_x, plane->state->crtc_y,
> +                 plane->state->src_w >> 16,
> +                 plane->state->src_h >> 16,
> +                 plane->state->src_x >> 16,
> +                 plane->state->src_y >> 16);
>         virtio_gpu_cmd_set_scanout(vgdev, output->index, handle,
> -                                  plane->state->crtc_w,
> -                                  plane->state->crtc_h,
> -                                  plane->state->crtc_x,
> -                                  plane->state->crtc_y);
> +                                  plane->state->src_w >> 16,
> +                                  plane->state->src_h >> 16,
> +                                  plane->state->src_x >> 16,
> +                                  plane->state->src_y >> 16);
>         virtio_gpu_cmd_resource_flush(vgdev, handle,
> -                                     plane->state->crtc_x,
> -                                     plane->state->crtc_y,
> -                                     plane->state->crtc_w,
> -                                     plane->state->crtc_h);
> +                                     plane->state->src_x >> 16,
> +                                     plane->state->src_y >> 16,
> +                                     plane->state->src_w >> 16,
> +                                     plane->state->src_h >> 16);
>  }
>
>  static void virtio_gpu_cursor_plane_update(struct drm_plane *plane,
> --
> 1.8.3.1
>



-- 
Marc-André Lureau

[toc] | [next] | [standalone]

#1421882

On Di, 2016-06-14 at 12:13 +0200, Marc-André Lureau wrote:
> Hi
> 
> On Tue, May 31, 2016 at 2:52 PM, Gerd Hoffmann <kraxel@redhat.com> wrote:
> > Pick up the correct source rectangle from framebuffer.
> > Without this multihead setups are not working correctly.
> >
> > Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
> 
> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> 
> Additionally, I had to modify the page_flip() function to take the
> plane source coordinates for virgl/3d multihead to work. Feel free to
> squash.

This is in progress of being sorted, by dropping the
virtio_gpu_page_flip function altogether in favor of atomic helpers,
which will use the (already fixed) plane callbacks instead.

See nonblocking commit support patches by Daniel Vetter on this list.

cheers,
  Gerd

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web