Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1421545 > unrolled thread

[PATCH 2/3] arm64: dts: uniphier: change cpu-release-address

Started byMasahiro Yamada <yamada.masahiro@socionext.com>
First post2016-06-14 05:10 +0200
Last post2016-06-14 05:10 +0200
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH 2/3] arm64: dts: uniphier: change cpu-release-address Masahiro Yamada <yamada.masahiro@socionext.com> - 2016-06-14 05:10 +0200

#1421545 — [PATCH 2/3] arm64: dts: uniphier: change cpu-release-address

FromMasahiro Yamada <yamada.masahiro@socionext.com>
Date2016-06-14 05:10 +0200
Subject[PATCH 2/3] arm64: dts: uniphier: change cpu-release-address
Message-ID<rJMTL-7lq-5@gated-at.bofh.it>
At first, 256 byte of the head of DRAM space was reserved for some
reasons.  However, as the progress of development, it turned out
unnecessary, and it was never used in the end.  Move the CPU release
address to leave no space.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
index 31dc51b..644025c 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
@@ -77,7 +77,7 @@
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0 0x000>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000100>;
+			cpu-release-addr = <0 0x80000000>;
 		};
 
 		cpu1: cpu@1 {
@@ -85,7 +85,7 @@
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0 0x001>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000100>;
+			cpu-release-addr = <0 0x80000000>;
 		};
 
 		cpu2: cpu@100 {
@@ -93,7 +93,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0 0x100>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000100>;
+			cpu-release-addr = <0 0x80000000>;
 		};
 
 		cpu3: cpu@101 {
@@ -101,7 +101,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0 0x101>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000100>;
+			cpu-release-addr = <0 0x80000000>;
 		};
 	};
 
-- 
1.9.1

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web