Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1419096 > unrolled thread

Add MediaTek USB3 DRD Driver

Started byChunfeng Yun <chunfeng.yun@mediatek.com>
First post2016-06-10 09:40 +0200
Last post2016-06-10 11:30 +0200
Articles 4 — 3 participants

Back to article view | Back to linux.kernel

Contents

  Add MediaTek USB3 DRD Driver  Chunfeng Yun <chunfeng.yun@mediatek.com> - 2016-06-10 09:40 +0200
    [PATCH v3,3/5] usb: xhci-mtk: make IPPC register optional Chunfeng Yun <chunfeng.yun@mediatek.com> - 2016-06-10 09:40 +0200
    Re: Add MediaTek USB3 DRD Driver chunfeng yun <chunfeng.yun@mediatek.com> - 2016-06-10 11:20 +0200
    Re: Add MediaTek USB3 DRD Driver Felipe Balbi <felipe.balbi@linux.intel.com> - 2016-06-10 11:30 +0200

#1419096 — Add MediaTek USB3 DRD Driver

FromChunfeng Yun <chunfeng.yun@mediatek.com>
Date2016-06-10 09:40 +0200
SubjectAdd MediaTek USB3 DRD Driver
Message-ID<rIpcS-1FF-5@gated-at.bofh.it>
From 8fdc924cecf0ca14da6e8aba360501e53437e548 Mon Sep 17 00:00:00 2001
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Date: Fri, 10 Jun 2016 15:20:20 +0800
Subject: [PATCH 0/5] Add MediaTek USB3 DRD Driver

These patches introduce the MediaTek USB3 dual-role controller
driver.

The driver can be configured as Dual-Role Device (DRD),
Peripheral Only and Host Only (xHCI) modes. It works well
with Mass Storage, RNDIS and g_zero on FS/HS and SS. And it is
tested on MT8173 platform which only contains USB2.0 device IP,
and on MT6290 platform which contains USB3.0 device IP.

Change in v3:
1. fix some typo error
2. rename mtu3.txt to mt8173-mtu3.txt

Change in v2:
1. modify binding docs according to suggestions
2. modify some comments and remove some dummy blank lines
3. fix memory leakage

Chunfeng Yun (5):
  dt-bindings: mt8173-xhci: support host side of dual-role mode
  dt-bindings: mt8173-mtu3: add devicetree bindings
  usb: xhci-mtk: make IPPC register optional
  usb: Add MediaTek USB3 DRD Driver
  arm64: dts: mediatek: add USB3 DRD driver

 .../devicetree/bindings/usb/mt8173-mtu3.txt        |   85 ++
 .../devicetree/bindings/usb/mt8173-xhci.txt        |   48 ++
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts        |   46 +-
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           |   28 +-
 drivers/usb/Kconfig                                |    2 +
 drivers/usb/Makefile                               |    1 +
 drivers/usb/host/xhci-mtk.c                        |   32 +-
 drivers/usb/mtu3/Kconfig                           |   47 ++
 drivers/usb/mtu3/Makefile                          |   20 +
 drivers/usb/mtu3/mtu3.h                            |  422 ++++++++++
 drivers/usb/mtu3/mtu3_core.c                       |  879 ++++++++++++++++++++
 drivers/usb/mtu3/mtu3_dr.c                         |  348 ++++++++
 drivers/usb/mtu3/mtu3_dr.h                         |  108 +++
 drivers/usb/mtu3/mtu3_gadget.c                     |  731 ++++++++++++++++
 drivers/usb/mtu3/mtu3_gadget_ep0.c                 |  879 ++++++++++++++++++++
 drivers/usb/mtu3/mtu3_host.c                       |  294 +++++++
 drivers/usb/mtu3/mtu3_hw_regs.h                    |  474 +++++++++++
 drivers/usb/mtu3/mtu3_plat.c                       |  490 +++++++++++
 drivers/usb/mtu3/mtu3_qmu.c                        |  599 +++++++++++++
 drivers/usb/mtu3/mtu3_qmu.h                        |   43 +
 20 files changed, 5562 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
 create mode 100644 drivers/usb/mtu3/Kconfig
 create mode 100644 drivers/usb/mtu3/Makefile
 create mode 100644 drivers/usb/mtu3/mtu3.h
 create mode 100644 drivers/usb/mtu3/mtu3_core.c
 create mode 100644 drivers/usb/mtu3/mtu3_dr.c
 create mode 100644 drivers/usb/mtu3/mtu3_dr.h
 create mode 100644 drivers/usb/mtu3/mtu3_gadget.c
 create mode 100644 drivers/usb/mtu3/mtu3_gadget_ep0.c
 create mode 100644 drivers/usb/mtu3/mtu3_host.c
 create mode 100644 drivers/usb/mtu3/mtu3_hw_regs.h
 create mode 100644 drivers/usb/mtu3/mtu3_plat.c
 create mode 100644 drivers/usb/mtu3/mtu3_qmu.c
 create mode 100644 drivers/usb/mtu3/mtu3_qmu.h

--
1.7.9.5

[toc] | [next] | [standalone]

#1419099 — [PATCH v3,3/5] usb: xhci-mtk: make IPPC register optional

FromChunfeng Yun <chunfeng.yun@mediatek.com>
Date2016-06-10 09:40 +0200
Subject[PATCH v3,3/5] usb: xhci-mtk: make IPPC register optional
Message-ID<rIpcS-1FF-21@gated-at.bofh.it>
In reply to#1419096
Make IPPC register optional to support host side of dual-role mode,
due to it is moved into common glue layer for simplification.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/host/xhci-mtk.c |   32 +++++++++++++++++++++++++++-----
 1 file changed, 27 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 79959f1..dc86832 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -94,6 +94,9 @@ static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
 	int ret;
 	int i;
 
+	if (ippc == NULL)
+		return 0;
+
 	/* power on host ip */
 	value = readl(&ippc->ip_pw_ctr1);
 	value &= ~CTRL1_IP_HOST_PDN;
@@ -139,6 +142,9 @@ static int xhci_mtk_host_disable(struct xhci_hcd_mtk *mtk)
 	int ret;
 	int i;
 
+	if (ippc == NULL)
+		return 0;
+
 	/* power down all u3 ports */
 	for (i = 0; i < mtk->num_u3_ports; i++) {
 		value = readl(&ippc->u3_ctrl_p[i]);
@@ -173,6 +179,9 @@ static int xhci_mtk_ssusb_config(struct xhci_hcd_mtk *mtk)
 	struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
 	u32 value;
 
+	if (ippc == NULL)
+		return 0;
+
 	/* reset whole ip */
 	value = readl(&ippc->ip_pw_ctr0);
 	value |= CTRL0_IP_SW_RST;
@@ -475,6 +484,7 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci)
 /* called during probe() after chip reset completes */
 static int xhci_mtk_setup(struct usb_hcd *hcd)
 {
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 	struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
 	int ret;
 
@@ -482,12 +492,21 @@ static int xhci_mtk_setup(struct usb_hcd *hcd)
 		ret = xhci_mtk_ssusb_config(mtk);
 		if (ret)
 			return ret;
+	}
+
+	ret = xhci_gen_setup(hcd, xhci_mtk_quirks);
+	if (ret)
+		return ret;
+
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		mtk->num_u3_ports = xhci->num_usb3_ports;
+		mtk->num_u2_ports = xhci->num_usb2_ports;
 		ret = xhci_mtk_sch_init(mtk);
 		if (ret)
 			return ret;
 	}
 
-	return xhci_gen_setup(hcd, xhci_mtk_quirks);
+	return ret;
 }
 
 static int xhci_mtk_probe(struct platform_device *pdev)
@@ -595,11 +614,14 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);
 
+	mtk->ippc_regs = NULL;
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	mtk->ippc_regs = devm_ioremap_resource(dev, res);
-	if (IS_ERR(mtk->ippc_regs)) {
-		ret = PTR_ERR(mtk->ippc_regs);
-		goto put_usb2_hcd;
+	if (res) {	/* ippc register is optional */
+		mtk->ippc_regs = devm_ioremap_resource(dev, res);
+		if (IS_ERR(mtk->ippc_regs)) {
+			ret = PTR_ERR(mtk->ippc_regs);
+			goto put_usb2_hcd;
+		}
 	}
 
 	for (phy_num = 0; phy_num < mtk->num_phys; phy_num++) {
-- 
1.7.9.5

[toc] | [prev] | [next] | [standalone]

#1419145

Fromchunfeng yun <chunfeng.yun@mediatek.com>
Date2016-06-10 11:20 +0200
Message-ID<rIqLE-2IM-21@gated-at.bofh.it>
In reply to#1419096
Hi,
On Fri, 2016-06-10 at 15:32 +0800, Chunfeng Yun wrote:
> From 8fdc924cecf0ca14da6e8aba360501e53437e548 Mon Sep 17 00:00:00 2001
> From: Chunfeng Yun <chunfeng.yun@mediatek.com>
> Date: Fri, 10 Jun 2016 15:20:20 +0800
> Subject: [PATCH 0/5] Add MediaTek USB3 DRD Driver
> 
> These patches introduce the MediaTek USB3 dual-role controller
> driver.
> 
> The driver can be configured as Dual-Role Device (DRD),
> Peripheral Only and Host Only (xHCI) modes. It works well
> with Mass Storage, RNDIS and g_zero on FS/HS and SS. And it is
> tested on MT8173 platform which only contains USB2.0 device IP,
> and on MT6290 platform which contains USB3.0 device IP.
> 
> Change in v3:
> 1. fix some typo error
> 2. rename mtu3.txt to mt8173-mtu3.txt
> 
> Change in v2:
> 1. modify binding docs according to suggestions
> 2. modify some comments and remove some dummy blank lines
> 3. fix memory leakage
> 
> Chunfeng Yun (5):
>   dt-bindings: mt8173-xhci: support host side of dual-role mode
>   dt-bindings: mt8173-mtu3: add devicetree bindings

Could you please help me to review the following two patches based on
v4.7-rc1:
  1- usb: xhci-mtk: make IPPC register optional
  2- usb: Add MediaTek USB3 DRD Driver

Thank you very much

>   usb: xhci-mtk: make IPPC register optional
>   usb: Add MediaTek USB3 DRD Driver
>   arm64: dts: mediatek: add USB3 DRD driver
> 
>  .../devicetree/bindings/usb/mt8173-mtu3.txt        |   85 ++
>  .../devicetree/bindings/usb/mt8173-xhci.txt        |   48 ++
>  arch/arm64/boot/dts/mediatek/mt8173-evb.dts        |   46 +-
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi           |   28 +-
>  drivers/usb/Kconfig                                |    2 +
>  drivers/usb/Makefile                               |    1 +
>  drivers/usb/host/xhci-mtk.c                        |   32 +-
>  drivers/usb/mtu3/Kconfig                           |   47 ++
>  drivers/usb/mtu3/Makefile                          |   20 +
>  drivers/usb/mtu3/mtu3.h                            |  422 ++++++++++
>  drivers/usb/mtu3/mtu3_core.c                       |  879 ++++++++++++++++++++
>  drivers/usb/mtu3/mtu3_dr.c                         |  348 ++++++++
>  drivers/usb/mtu3/mtu3_dr.h                         |  108 +++
>  drivers/usb/mtu3/mtu3_gadget.c                     |  731 ++++++++++++++++
>  drivers/usb/mtu3/mtu3_gadget_ep0.c                 |  879 ++++++++++++++++++++
>  drivers/usb/mtu3/mtu3_host.c                       |  294 +++++++
>  drivers/usb/mtu3/mtu3_hw_regs.h                    |  474 +++++++++++
>  drivers/usb/mtu3/mtu3_plat.c                       |  490 +++++++++++
>  drivers/usb/mtu3/mtu3_qmu.c                        |  599 +++++++++++++
>  drivers/usb/mtu3/mtu3_qmu.h                        |   43 +
>  20 files changed, 5562 insertions(+), 14 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
>  create mode 100644 drivers/usb/mtu3/Kconfig
>  create mode 100644 drivers/usb/mtu3/Makefile
>  create mode 100644 drivers/usb/mtu3/mtu3.h
>  create mode 100644 drivers/usb/mtu3/mtu3_core.c
>  create mode 100644 drivers/usb/mtu3/mtu3_dr.c
>  create mode 100644 drivers/usb/mtu3/mtu3_dr.h
>  create mode 100644 drivers/usb/mtu3/mtu3_gadget.c
>  create mode 100644 drivers/usb/mtu3/mtu3_gadget_ep0.c
>  create mode 100644 drivers/usb/mtu3/mtu3_host.c
>  create mode 100644 drivers/usb/mtu3/mtu3_hw_regs.h
>  create mode 100644 drivers/usb/mtu3/mtu3_plat.c
>  create mode 100644 drivers/usb/mtu3/mtu3_qmu.c
>  create mode 100644 drivers/usb/mtu3/mtu3_qmu.h
> 
> --
> 1.7.9.5
> 
>

[toc] | [prev] | [next] | [standalone]

#1419150

FromFelipe Balbi <felipe.balbi@linux.intel.com>
Date2016-06-10 11:30 +0200
Message-ID<rIqVj-2LW-1@gated-at.bofh.it>
In reply to#1419096

[Multipart message — attachments visible in raw view] — view raw

Hi,

Chunfeng Yun <chunfeng.yun@mediatek.com> writes:
> From 8fdc924cecf0ca14da6e8aba360501e53437e548 Mon Sep 17 00:00:00 2001
> From: Chunfeng Yun <chunfeng.yun@mediatek.com>
> Date: Fri, 10 Jun 2016 15:20:20 +0800
> Subject: [PATCH 0/5] Add MediaTek USB3 DRD Driver
>
> These patches introduce the MediaTek USB3 dual-role controller
> driver.
>
> The driver can be configured as Dual-Role Device (DRD),
> Peripheral Only and Host Only (xHCI) modes. It works well
> with Mass Storage, RNDIS and g_zero on FS/HS and SS. And it is
> tested on MT8173 platform which only contains USB2.0 device IP,
> and on MT6290 platform which contains USB3.0 device IP.
>
> Change in v3:
> 1. fix some typo error
> 2. rename mtu3.txt to mt8173-mtu3.txt
>
> Change in v2:
> 1. modify binding docs according to suggestions
> 2. modify some comments and remove some dummy blank lines
> 3. fix memory leakage

I don't see anything inherently wrong with this series. But keep in mind
I don't have HW to test. I can take the peripheral driver in a few days.

-- 
balbi

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web