Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1419783 > unrolled thread

[PATCH 30/48] ARM: dts: at91: sama5d3: TC blocks are also simple-mfd and syscon devices

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 30/48] ARM: dts: at91: sama5d3: TC blocks are also simple-mfd and syscon devices Alexandre Belloni <alexandre.belloni@free-electrons.com> - 2016-06-11 00:20 +0200

#1419783 — [PATCH 30/48] ARM: dts: at91: sama5d3: TC blocks are also simple-mfd and syscon devices

Add simple-mfd and syscon to the TC blocks to allow to register one of the
channels as clocksource properly at boot time. It also allows to use
regmap instead of tclib.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/boot/dts/sama5d3.dtsi      | 4 +++-
 arch/arm/boot/dts/sama5d3_tcb1.dtsi | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 36301bd9a14a..cfa659a18639 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -142,7 +142,9 @@
 			};
 
 			tcb0: timer@f0010000 {
-				compatible = "atmel,at91sam9x5-tcb";
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xf0010000 0x100>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&tcb0_clk>, <&clk32k>;
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index 801f9745e82f..cb30bdb1a9ca 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -28,7 +28,9 @@
 			};
 
 			tcb1: timer@f8014000 {
-				compatible = "atmel,at91sam9x5-tcb";
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xf8014000 0x100>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&tcb1_clk>, <&clk32k>;
-- 
2.8.1

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web