Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1419757 > unrolled thread

[PATCH 40/48] ARM: dts: at91: sama5d2: TC blocks are also simple-mfd and syscon devices

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 40/48] ARM: dts: at91: sama5d2: TC blocks are also simple-mfd and syscon devices Alexandre Belloni <alexandre.belloni@free-electrons.com> - 2016-06-11 00:10 +0200

#1419757 — [PATCH 40/48] ARM: dts: at91: sama5d2: TC blocks are also simple-mfd and syscon devices

Add simple-mfd and syscon to the TC blocks to allow to register one of the
channels as clocksource properly at boot time. It also allows to use
regmap instead of tclib.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/boot/dts/sama5d2.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 2827e7ab5ebc..0db2f8b77227 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -906,7 +906,9 @@
 			};
 
 			tcb0: timer@f800c000 {
-				compatible = "atmel,at91sam9x5-tcb";
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xf800c000 0x100>;
 				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&tcb0_clk>, <&clk32k>;
@@ -914,7 +916,9 @@
 			};
 
 			tcb1: timer@f8010000 {
-				compatible = "atmel,at91sam9x5-tcb";
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xf8010000 0x100>;
 				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&tcb1_clk>, <&clk32k>;
-- 
2.8.1

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web