Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1415235 > unrolled thread

[PATCH 3/3] firmware: scpi: add device power domain support using genpd

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 3/3] firmware: scpi: add device power domain support using genpd Sudeep Holla <sudeep.holla@arm.com> - 2016-06-06 18:00 +0200
    Re: [PATCH 3/3] firmware: scpi: add device power domain support  using genpd "Jon Medhurst (Tixy)" <tixy@linaro.org> - 2016-06-07 15:20 +0200
      Re: [PATCH 3/3] firmware: scpi: add device power domain support using  genpd Sudeep Holla <sudeep.holla@arm.com> - 2016-06-07 15:40 +0200
    Re: [PATCH 3/3] firmware: scpi: add device power domain support using  genpd Sudeep Holla <sudeep.holla@arm.com> - 2016-06-10 18:20 +0200

#1415235 — [PATCH 3/3] firmware: scpi: add device power domain support using genpd

This patch hooks up the support for device power domain provided by
SCPI using the Linux generic power domain infrastructure.

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/firmware/Kconfig   |   8 +++
 drivers/firmware/Makefile  |   1 +
 drivers/firmware/scpi_pd.c | 152 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 161 insertions(+)
 create mode 100644 drivers/firmware/scpi_pd.c

Hi,

Since most of the power controller drivers are place in drivers/soc/<soc_name>,
I am not sure where to put this SCPI power domain code as it can be used
on multiple SoC. I have placed it in drivers/firmware temporarily for
review. Please suggest the most apt place to put this driver.

Regards,
Sudeep

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 41abdc54815e..80c963c60f13 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -27,6 +27,14 @@ config ARM_SCPI_PROTOCOL
 	  This protocol library provides interface for all the client drivers
 	  making use of the features offered by the SCP.

+config ARM_SCPI_POWER_DOMAIN
+	tristate "SCPI power domain driver"
+	depends on (ARM_SCPI_PROTOCOL && PM) || COMPILE_TEST
+	select PM_GENERIC_DOMAINS_OF
+	help
+	  This enables support for the SCPI power domains which can be
+	  enabled or disabled via the SCP firmware
+
 config EDD
 	tristate "BIOS Enhanced Disk Drive calls determine boot disk"
 	depends on X86
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 474bada56fcd..24f7fe8e3fc3 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -3,6 +3,7 @@
 #
 obj-$(CONFIG_ARM_PSCI_FW)	+= psci.o
 obj-$(CONFIG_ARM_SCPI_PROTOCOL)	+= arm_scpi.o
+obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pd.o
 obj-$(CONFIG_DMI)		+= dmi_scan.o
 obj-$(CONFIG_DMI_SYSFS)		+= dmi-sysfs.o
 obj-$(CONFIG_EDD)		+= edd.o
diff --git a/drivers/firmware/scpi_pd.c b/drivers/firmware/scpi_pd.c
new file mode 100644
index 000000000000..fb24631d2b2e
--- /dev/null
+++ b/drivers/firmware/scpi_pd.c
@@ -0,0 +1,152 @@
+/*
+ * SCPI Generic power domain support.
+ *
+ * Copyright (C) 2016 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/pm_domain.h>
+#include <linux/scpi_protocol.h>
+
+struct scpi_pm_domain {
+	struct generic_pm_domain genpd;
+	struct scpi_ops *ops;
+	u32 domain;
+	char name[20];
+};
+
+enum scpi_power_domain_state {
+	SCPI_PD_STATE_ON = 0,
+	SCPI_PD_STATE_OFF = 3,
+};
+
+#define to_scpi_pd(gpd) container_of(gpd, struct scpi_pm_domain, genpd)
+
+static int scpi_pd_power(struct scpi_pm_domain *pd, bool power_on)
+{
+	int ret;
+	enum scpi_power_domain_state state;
+
+	if (power_on)
+		state = SCPI_PD_STATE_ON;
+	else
+		state = SCPI_PD_STATE_OFF;
+
+	ret = pd->ops->device_set_power_state(pd->domain, state);
+	if (ret)
+		return ret;
+
+	return (state == pd->ops->device_get_power_state(pd->domain));
+}
+
+static int scpi_pd_power_on(struct generic_pm_domain *domain)
+{
+	struct scpi_pm_domain *pd = to_scpi_pd(domain);
+
+	return scpi_pd_power(pd, true);
+}
+
+static int scpi_pd_power_off(struct generic_pm_domain *domain)
+{
+	struct scpi_pm_domain *pd = to_scpi_pd(domain);
+
+	return scpi_pd_power(pd, false);
+}
+
+static int scpi_pm_domain_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct scpi_pm_domain *scpi_pd;
+	struct genpd_onecell_data *scpi_pd_data;
+	struct generic_pm_domain **domains;
+	struct scpi_ops *scpi_ops;
+	int ret, num_domains, i;
+
+	scpi_ops = get_scpi_ops();
+	if (!scpi_ops)
+		return -EPROBE_DEFER;
+
+	if (!np) {
+		dev_err(dev, "device tree node not found\n");
+		return -ENODEV;
+	}
+
+	ret = of_property_read_u32(np, "num-domains", &num_domains);
+	if (ret) {
+		dev_err(dev, "number of domains not found\n");
+		return -EINVAL;
+	}
+
+	scpi_pd = devm_kcalloc(dev, num_domains, sizeof(*scpi_pd), GFP_KERNEL);
+	if (!scpi_pd)
+		return -ENOMEM;
+
+	scpi_pd_data = devm_kzalloc(dev, sizeof(*scpi_pd_data), GFP_KERNEL);
+	if (!scpi_pd_data)
+		return -ENOMEM;
+
+	domains = devm_kcalloc(dev, num_domains, sizeof(*domains), GFP_KERNEL);
+	if (!domains)
+		return -ENOMEM;
+
+	for (i = 0; i < num_domains; i++, scpi_pd++) {
+		domains[i] = &scpi_pd->genpd;
+
+		scpi_pd->domain = i;
+		scpi_pd->ops = scpi_ops;
+		sprintf(scpi_pd->name, "%s.%d", np->name, i);
+		scpi_pd->genpd.name = scpi_pd->name;
+		scpi_pd->genpd.power_off = scpi_pd_power_off;
+		scpi_pd->genpd.power_on = scpi_pd_power_on;
+
+		/*
+		 * Treat all power domains as off at boot.
+		 *
+		 * The SCP firmware itself may have switched on some domains,
+		 * but for reference counting purpose, keep it this way.
+		 */
+		pm_genpd_init(&scpi_pd->genpd, NULL, true);
+	}
+
+	scpi_pd_data->domains = domains;
+	scpi_pd_data->num_domains = num_domains;
+
+	of_genpd_add_provider_onecell(np, scpi_pd_data);
+
+	return 0;
+}
+
+static const struct of_device_id scpi_power_domain_ids[] = {
+	{ .compatible = "arm,scpi-power-domains", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, scpi_power_domain_ids);
+
+static struct platform_driver scpi_power_domain_driver = {
+	.driver	= {
+		.name = "scpi_power_domain",
+		.of_match_table = scpi_power_domain_ids,
+	},
+	.probe = scpi_pm_domain_probe,
+};
+module_platform_driver(scpi_power_domain_driver);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI power domain driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4

[toc] | [next] | [standalone]

#1416156 — Re: [PATCH 3/3] firmware: scpi: add device power domain support using genpd

On Mon, 2016-06-06 at 16:53 +0100, Sudeep Holla wrote:
> This patch hooks up the support for device power domain provided by
> SCPI using the Linux generic power domain infrastructure.
> 
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Kevin Hilman <khilman@kernel.org>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Cc: linux-pm@vger.kernel.org
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
>  drivers/firmware/Kconfig   |   8 +++
>  drivers/firmware/Makefile  |   1 +
>  drivers/firmware/scpi_pd.c | 152 +++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 161 insertions(+)
>  create mode 100644 drivers/firmware/scpi_pd.c
> 
> Hi,
> 
> Since most of the power controller drivers are place in drivers/soc/<soc_name>,
> I am not sure where to put this SCPI power domain code as it can be used
> on multiple SoC. I have placed it in drivers/firmware temporarily for
> review. Please suggest the most apt place to put this driver.
> 
> Regards,
> Sudeep
> 
> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> index 41abdc54815e..80c963c60f13 100644
> --- a/drivers/firmware/Kconfig
> +++ b/drivers/firmware/Kconfig
> @@ -27,6 +27,14 @@ config ARM_SCPI_PROTOCOL
>  	  This protocol library provides interface for all the client drivers
>  	  making use of the features offered by the SCP.
> 
> +config ARM_SCPI_POWER_DOMAIN
> +	tristate "SCPI power domain driver"
> +	depends on (ARM_SCPI_PROTOCOL && PM) || COMPILE_TEST
> +	select PM_GENERIC_DOMAINS_OF

That select doesn't work for me and gives:

warning: (ARM_SCPI_POWER_DOMAIN) selects PM_GENERIC_DOMAINS_OF which has unmet direct dependencies (PM_GENERIC_DOMAINS && OF)

Followed by link errors due to missing symbols.

I think you need to select PM_GENERIC_DOMAINS as well. Or perhaps just
instead of, as PM_GENERIC_DOMAINS_OF defaults 'y' and isn't user
selectable. From kernel/power/Kconfig ...

config PM_GENERIC_DOMAINS_OF
	def_bool y
	depends on PM_GENERIC_DOMAINS && OF

[...]

-- 
Tixy

[toc] | [prev] | [next] | [standalone]

#1416171 — Re: [PATCH 3/3] firmware: scpi: add device power domain support using genpd

On 07/06/16 14:18, Jon Medhurst (Tixy) wrote:
> On Mon, 2016-06-06 at 16:53 +0100, Sudeep Holla wrote:
>> This patch hooks up the support for device power domain provided by
>> SCPI using the Linux generic power domain infrastructure.
>>
>> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
>> Cc: Kevin Hilman <khilman@kernel.org>
>> Cc: Ulf Hansson <ulf.hansson@linaro.org>
>> Cc: linux-pm@vger.kernel.org
>> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
>> ---
>>   drivers/firmware/Kconfig   |   8 +++
>>   drivers/firmware/Makefile  |   1 +
>>   drivers/firmware/scpi_pd.c | 152 +++++++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 161 insertions(+)
>>   create mode 100644 drivers/firmware/scpi_pd.c
>>
>> Hi,
>>
>> Since most of the power controller drivers are place in drivers/soc/<soc_name>,
>> I am not sure where to put this SCPI power domain code as it can be used
>> on multiple SoC. I have placed it in drivers/firmware temporarily for
>> review. Please suggest the most apt place to put this driver.
>>
>> Regards,
>> Sudeep
>>
>> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
>> index 41abdc54815e..80c963c60f13 100644
>> --- a/drivers/firmware/Kconfig
>> +++ b/drivers/firmware/Kconfig
>> @@ -27,6 +27,14 @@ config ARM_SCPI_PROTOCOL
>>   	  This protocol library provides interface for all the client drivers
>>   	  making use of the features offered by the SCP.
>>
>> +config ARM_SCPI_POWER_DOMAIN
>> +	tristate "SCPI power domain driver"
>> +	depends on (ARM_SCPI_PROTOCOL && PM) || COMPILE_TEST
>> +	select PM_GENERIC_DOMAINS_OF
>

Actually I had something like below before and changed it before posting.

config ARM_SCPI_POWER_DOMAIN
	tristate "SCPI power domain driver"
	depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
	select PM_GENERIC_DOMAINS if PM
	select PM_GENERIC_DOMAINS_OF if PM

The idea was to allow compilation of this even if PM was disabled.


> That select doesn't work for me and gives:
>
> warning: (ARM_SCPI_POWER_DOMAIN) selects PM_GENERIC_DOMAINS_OF which has unmet direct dependencies (PM_GENERIC_DOMAINS && OF)
>
> Followed by link errors due to missing symbols.
>
> I think you need to select PM_GENERIC_DOMAINS as well.

I agree, that's exactly what I had before.

> Or perhaps just instead of, as PM_GENERIC_DOMAINS_OF defaults 'y' and isn't user
> selectable. From kernel/power/Kconfig ...
>

Makes sense, I am fine with that too.

-- 
Regards,
Sudeep

[toc] | [prev] | [next] | [standalone]

#1419561 — Re: [PATCH 3/3] firmware: scpi: add device power domain support using genpd

Hi,

On 06/06/16 16:53, Sudeep Holla wrote:
> This patch hooks up the support for device power domain provided by
> SCPI using the Linux generic power domain infrastructure.
>
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Kevin Hilman <khilman@kernel.org>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Cc: linux-pm@vger.kernel.org
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
>   drivers/firmware/Kconfig   |   8 +++
>   drivers/firmware/Makefile  |   1 +
>   drivers/firmware/scpi_pd.c | 152 +++++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 161 insertions(+)
>   create mode 100644 drivers/firmware/scpi_pd.c
>
> Hi,
>
> Since most of the power controller drivers are place in drivers/soc/<soc_name>,
> I am not sure where to put this SCPI power domain code as it can be used
> on multiple SoC. I have placed it in drivers/firmware temporarily for
> review. Please suggest the most apt place to put this driver.
>

Any suggestions ? Or drivers/firmware is OK for now ?

-- 
Regards,
Sudeep

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web