Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1415634 > unrolled thread

[PATCH 9/9] pinctrl: at91-pio4: make it explicitly non-modular

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 9/9] pinctrl: at91-pio4: make it explicitly non-modular Paul Gortmaker <paul.gortmaker@windriver.com> - 2016-06-07 04:50 +0200
    Re: [PATCH 9/9] pinctrl: at91-pio4: make it explicitly non-modular Ludovic Desroches <ludovic.desroches@atmel.com> - 2016-06-08 08:30 +0200

#1415634 — [PATCH 9/9] pinctrl: at91-pio4: make it explicitly non-modular

The Kconfig currently controlling compilation of this code is:

drivers/pinctrl/Kconfig:config PINCTRL_AT91PIO4
drivers/pinctrl/Kconfig:        bool "AT91 PIO4 pinctrl driver"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
 drivers/pinctrl/pinctrl-at91-pio4.c | 22 +++-------------------
 1 file changed, 3 insertions(+), 19 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index a025b40d246b..4438dca85c1c 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -20,7 +20,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pinctrl/pinconf.h>
@@ -879,7 +879,6 @@ static const struct of_device_id atmel_pctrl_of_match[] = {
 		/* sentinel */
 	}
 };
-MODULE_DEVICE_TABLE(of, atmel_pctrl_of_match);
 
 static int atmel_pinctrl_probe(struct platform_device *pdev)
 {
@@ -1074,28 +1073,13 @@ clk_prepare_enable_error:
 	return ret;
 }
 
-int atmel_pinctrl_remove(struct platform_device *pdev)
-{
-	struct atmel_pioctrl *atmel_pioctrl = platform_get_drvdata(pdev);
-
-	irq_domain_remove(atmel_pioctrl->irq_domain);
-	clk_disable_unprepare(atmel_pioctrl->clk);
-	gpiochip_remove(atmel_pioctrl->gpio_chip);
-
-	return 0;
-}
-
 static struct platform_driver atmel_pinctrl_driver = {
 	.driver = {
 		.name = "pinctrl-at91-pio4",
 		.of_match_table = atmel_pctrl_of_match,
 		.pm = &atmel_pctrl_pm_ops,
+		.suppress_bind_attrs = true,
 	},
 	.probe = atmel_pinctrl_probe,
-	.remove = atmel_pinctrl_remove,
 };
-module_platform_driver(atmel_pinctrl_driver);
-
-MODULE_AUTHOR(Ludovic Desroches <ludovic.desroches@atmel.com>);
-MODULE_DESCRIPTION("Atmel PIO4 pinctrl driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(atmel_pinctrl_driver);
-- 
2.8.0

[toc] | [next] | [standalone]

#1416898

On Mon, Jun 06, 2016 at 10:43:08PM -0400, Paul Gortmaker wrote:
> The Kconfig currently controlling compilation of this code is:
> 
> drivers/pinctrl/Kconfig:config PINCTRL_AT91PIO4
> drivers/pinctrl/Kconfig:        bool "AT91 PIO4 pinctrl driver"
> 
> ...meaning that it currently is not being built as a module by anyone.
> 
> Lets remove the modular code that is essentially orphaned, so that
> when reading the driver there is no doubt it is builtin-only.
> 
> We explicitly disallow a driver unbind, since that doesn't have a
> sensible use case anyway, and it allows us to drop the ".remove"
> code for non-modular drivers.
> 
> Since module_platform_driver() uses the same init level priority as
> builtin_platform_driver() the init ordering remains unchanged with
> this commit.
> 
> Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
> 
> We also delete the MODULE_LICENSE tag etc. since all that information
> is already contained at the top of the file in the comments.
> 
> Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: linux-gpio@vger.kernel.org
> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Thanks for cleaning this stuff.
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>

> ---
>  drivers/pinctrl/pinctrl-at91-pio4.c | 22 +++-------------------
>  1 file changed, 3 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
> index a025b40d246b..4438dca85c1c 100644
> --- a/drivers/pinctrl/pinctrl-at91-pio4.c
> +++ b/drivers/pinctrl/pinctrl-at91-pio4.c
> @@ -20,7 +20,7 @@
>  #include <linux/gpio.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> -#include <linux/module.h>
> +#include <linux/init.h>
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
>  #include <linux/pinctrl/pinconf.h>
> @@ -879,7 +879,6 @@ static const struct of_device_id atmel_pctrl_of_match[] = {
>  		/* sentinel */
>  	}
>  };
> -MODULE_DEVICE_TABLE(of, atmel_pctrl_of_match);
>  
>  static int atmel_pinctrl_probe(struct platform_device *pdev)
>  {
> @@ -1074,28 +1073,13 @@ clk_prepare_enable_error:
>  	return ret;
>  }
>  
> -int atmel_pinctrl_remove(struct platform_device *pdev)
> -{
> -	struct atmel_pioctrl *atmel_pioctrl = platform_get_drvdata(pdev);
> -
> -	irq_domain_remove(atmel_pioctrl->irq_domain);
> -	clk_disable_unprepare(atmel_pioctrl->clk);
> -	gpiochip_remove(atmel_pioctrl->gpio_chip);
> -
> -	return 0;
> -}
> -
>  static struct platform_driver atmel_pinctrl_driver = {
>  	.driver = {
>  		.name = "pinctrl-at91-pio4",
>  		.of_match_table = atmel_pctrl_of_match,
>  		.pm = &atmel_pctrl_pm_ops,
> +		.suppress_bind_attrs = true,
>  	},
>  	.probe = atmel_pinctrl_probe,
> -	.remove = atmel_pinctrl_remove,
>  };
> -module_platform_driver(atmel_pinctrl_driver);
> -
> -MODULE_AUTHOR(Ludovic Desroches <ludovic.desroches@atmel.com>);
> -MODULE_DESCRIPTION("Atmel PIO4 pinctrl driver");
> -MODULE_LICENSE("GPL v2");
> +builtin_platform_driver(atmel_pinctrl_driver);
> -- 
> 2.8.0
> 

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web