Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1413683 > unrolled thread

Re: [PATCH V4 9/9] irqchip/gic: Add platform driver for non-root GICs that require RPM

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH V4 9/9] irqchip/gic: Add platform driver for non-root  GICs that require RPM Marc Zyngier <marc.zyngier@arm.com> - 2016-06-04 12:20 +0200
    Re: [PATCH V4 9/9] irqchip/gic: Add platform driver for non-root GICs  that require RPM Jon Hunter <jonathanh@nvidia.com> - 2016-06-06 10:30 +0200

#1413683 — Re: [PATCH V4 9/9] irqchip/gic: Add platform driver for non-root GICs that require RPM

On Thu, 12 May 2016 16:19:32 +0100
Jon Hunter <jonathanh@nvidia.com> wrote:

> Add a platform driver to support non-root GICs that require runtime
> power-management. Currently, only non-root GICs are supported because
> the functions, smp_cross_call() and set_handle_irq(), that need to
> be called for a root controller are located in the __init section and
> so cannot be called by the platform driver.
> 
> The GIC platform driver re-uses many functions from the existing GIC
> driver including some functions to save and restore the GIC context
> during power transitions. The functions for saving and restoring the
> GIC context are currently only defined if CONFIG_CPU_PM is enabled and
> to ensure that these functions are always defined when the platform
> driver is enabled, a dependency on CONFIG_ARM_GIC_PM (which selects the
> platform driver) has been added.
> 
> In order to re-use the private GIC initialisation code, a new public
> function, of_gic_init(), has been added which calls various private
> functions to initialise the GIC.
> 
> There is no specific suspend handling for GICs registered as platform
> devices. Non-wakeup interrupts will be disabled by the kernel during
> late suspend, however, this alone will not power down the GIC if
> interrupts have been requested and not freed. Therefore, requestors of
> non-wakeup interrupts will need to free them on entering suspend in
> order to power-down the GIC.
> 
> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
> ---
>  drivers/irqchip/Kconfig      |   6 ++
>  drivers/irqchip/Makefile     |   1 +
>  drivers/irqchip/irq-gic-pm.c | 187 +++++++++++++++++++++++++++++++++++++++++++
>  drivers/irqchip/irq-gic.c    |  34 +++++++-
>  drivers/irqchip/irq-gic.h    |   2 +
>  5 files changed, 227 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/irqchip/irq-gic-pm.c
> 
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 81f88ada3a61..68f65c84fdfd 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -8,6 +8,12 @@ config ARM_GIC
>  	select IRQ_DOMAIN_HIERARCHY
>  	select MULTI_IRQ_HANDLER
>  
> +config ARM_GIC_PM
> +	bool
> +	depends on PM
> +	select ARM_GIC
> +	select PM_CLK
> +
>  config ARM_GIC_MAX_NR
>  	int
>  	default 2 if ARCH_REALVIEW
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index f828244b44c2..eab28e80cd8d 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -24,6 +24,7 @@ obj-$(CONFIG_ARCH_SUNXI)		+= irq-sun4i.o
>  obj-$(CONFIG_ARCH_SUNXI)		+= irq-sunxi-nmi.o
>  obj-$(CONFIG_ARCH_SPEAR3XX)		+= spear-shirq.o
>  obj-$(CONFIG_ARM_GIC)			+= irq-gic.o irq-gic-common.o
> +obj-$(CONFIG_ARM_GIC_PM)		+= irq-gic-pm.o
>  obj-$(CONFIG_REALVIEW_DT)		+= irq-gic-realview.o
>  obj-$(CONFIG_ARM_GIC_V2M)		+= irq-gic-v2m.o
>  obj-$(CONFIG_ARM_GIC_V3)		+= irq-gic-v3.o irq-gic-common.o
> diff --git a/drivers/irqchip/irq-gic-pm.c b/drivers/irqchip/irq-gic-pm.c
> new file mode 100644
> index 000000000000..a14331007bcf
> --- /dev/null
> +++ b/drivers/irqchip/irq-gic-pm.c
> @@ -0,0 +1,187 @@
> +/*
> + * Copyright (C) 2016 NVIDIA CORPORATION, All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +#include <linux/module.h>
> +#include <linux/clk.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_clock.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/slab.h>
> +
> +#include "irq-gic.h"
> +
> +struct gic_clk_data {
> +	unsigned int num_clocks;
> +	const char *const *clocks;
> +};
> +
> +static int gic_runtime_resume(struct device *dev)
> +{
> +	struct gic_chip_data *gic = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = pm_clk_resume(dev);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * On the very first resume, the pointer to the driver data
> +	 * will be NULL and this is intentional, because we do not
> +	 * want to restore the GIC on the very first resume. So if
> +	 * the pointer is not valid just return.
> +	 */
> +	if (!gic)
> +		return 0;
> +
> +	gic_dist_restore(gic);
> +	gic_cpu_restore(gic);
> +
> +	return 0;
> +}
> +
> +static int gic_runtime_suspend(struct device *dev)
> +{
> +	struct gic_chip_data *gic = dev_get_drvdata(dev);
> +
> +	gic_dist_save(gic);
> +	gic_cpu_save(gic);
> +
> +	return pm_clk_suspend(dev);
> +}
> +
> +static int gic_get_clocks(struct device *dev, const struct gic_clk_data *data)
> +{
> +	struct clk *clk;
> +	unsigned int i;
> +	int ret;
> +
> +	if (!dev || !data)
> +		return -EINVAL;
> +
> +	ret = pm_clk_create(dev);
> +	if (ret)
> +		return ret;
> +
> +	for (i = 0; i < data->num_clocks; i++) {
> +		clk = of_clk_get_by_name(dev->of_node, data->clocks[i]);
> +		if (IS_ERR(clk)) {
> +			dev_err(dev, "failed to get clock %s\n",
> +				data->clocks[i]);
> +			ret = PTR_ERR(clk);
> +			goto error;
> +		}
> +
> +		ret = pm_clk_add_clk(dev, clk);
> +		if (ret) {
> +			dev_err(dev, "failed to add clock at index %d\n", i);
> +			clk_put(clk);
> +			goto error;
> +		}
> +	}
> +
> +	return 0;
> +
> +error:
> +	pm_clk_destroy(dev);
> +
> +	return ret;
> +}
> +
> +static int gic_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	const struct gic_clk_data *data;
> +	struct gic_chip_data *gic;
> +	int ret, irq;
> +
> +	data = of_device_get_match_data(&pdev->dev);
> +	if (!data) {
> +		dev_err(&pdev->dev, "no device match found\n");
> +		return -ENODEV;
> +	}
> +
> +	irq = irq_of_parse_and_map(dev->of_node, 0);
> +	if (!irq) {
> +		dev_err(dev, "no parent interrupt found!\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = gic_get_clocks(dev, data);
> +	if (ret)
> +		goto irq_dispose;
> +
> +	pm_runtime_enable(dev);
> +
> +	ret = pm_runtime_get_sync(dev);
> +	if (ret < 0)
> +		goto rpm_disable;
> +
> +	ret = of_gic_init(dev, &gic);
> +	if (ret)
> +		goto rpm_put;
> +
> +	irq_set_chained_handler_and_data(irq, gic_handle_cascade_irq, gic);

nit: Rather than exporting the gic_handle_cascade entry point, I'd
rather you exported a helper from the GIC driver. Something like:

void gic_setup_cascade(int irq, struct gic_data *gic);

and do the handler registration there. Alternatively, you could also
move the irq parsing and handler registration into of_gic_init, and
have this single initialization entry point.

> +
> +	platform_set_drvdata(pdev, gic);
> +
> +	pm_runtime_put(dev);
> +
> +	dev_info(dev, "GIC IRQ controller registered\n");
> +
> +	return 0;
> +
> +rpm_put:
> +	pm_runtime_put_sync(dev);
> +rpm_disable:
> +	pm_runtime_disable(dev);
> +	pm_clk_destroy(dev);
> +irq_dispose:
> +	irq_dispose_mapping(irq);
> +
> +	return ret;
> +}
> +
> +static const struct dev_pm_ops gic_pm_ops = {
> +	SET_RUNTIME_PM_OPS(gic_runtime_suspend,
> +			   gic_runtime_resume, NULL)
> +};
> +
> +static const char * const gic400_clocks[] = {
> +	"clk",
> +};
> +
> +static const struct gic_clk_data gic400_data = {
> +	.num_clocks = ARRAY_SIZE(gic400_clocks),
> +	.clocks = gic400_clocks,
> +};
> +
> +static const struct of_device_id gic_match[] = {
> +	{ .compatible = "nvidia,tegra210-agic",	.data = &gic400_data },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, gic_match);
> +
> +static struct platform_driver gic_driver = {
> +	.probe		= gic_probe,
> +	.driver		= {
> +		.name	= "gic",
> +		.of_match_table	= gic_match,
> +		.pm	= &gic_pm_ops,
> +	}
> +};
> +
> +builtin_platform_driver(gic_driver);
> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
> index 9f8ab124898b..e65090f7afa4 100644
> --- a/drivers/irqchip/irq-gic.c
> +++ b/drivers/irqchip/irq-gic.c
> @@ -76,7 +76,7 @@ struct gic_chip_data {
>  	void __iomem *raw_dist_base;
>  	void __iomem *raw_cpu_base;
>  	u32 percpu_offset;
> -#ifdef CONFIG_CPU_PM
> +#if defined(CONFIG_CPU_PM) || defined(ARM_GIC_PM)

Shouldn't that be CONFIG_ARM_GIC_PM?

>  	u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
>  	u32 saved_spi_active[DIV_ROUND_UP(1020, 32)];
>  	u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
> @@ -526,7 +526,7 @@ int gic_cpu_if_down(unsigned int gic_nr)
>  	return 0;
>  }
>  
> -#ifdef CONFIG_CPU_PM
> +#if defined(CONFIG_CPU_PM) || defined(ARM_GIC_PM)

Same here?

>  /*
>   * Saves the GIC distributor registers during suspend or idle.  Must be called
>   * with interrupts disabled but before powering down the GIC.  After calling
> @@ -1297,6 +1297,30 @@ error:
>  	return -ENOMEM;
>  }
>  
> +int of_gic_init(struct device *dev, struct gic_chip_data **gic)
> +{
> +	int ret;
> +
> +	if (!dev || !dev->of_node || !gic)
> +		return -EINVAL;
> +
> +	*gic = devm_kzalloc(dev, sizeof(**gic), GFP_KERNEL);
> +	if (!*gic)
> +		return -ENOMEM;
> +
> +	gic_init_chip(*gic, dev, dev->of_node->name, false);
> +
> +	ret = gic_of_setup(*gic, dev->of_node);
> +	if (ret)
> +		return ret;
> +
> +	ret = gic_init_bases(*gic, -1, &dev->of_node->fwnode);
> +	if (ret)
> +		gic_teardown(*gic);
> +
> +	return ret;
> +}
> +
>  int __init
>  gic_of_init(struct device_node *node, struct device_node *parent)
>  {
> @@ -1351,7 +1375,11 @@ IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init);
>  IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
>  IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
>  IRQCHIP_DECLARE(pl390, "arm,pl390", gic_of_init);
> -
> +#else
> +int of_gic_init(struct device *dev, struct gic_chip_data **gic)
> +{
> +	return -ENOTSUPP;
> +}
>  #endif
>  
>  #ifdef CONFIG_ACPI
> diff --git a/drivers/irqchip/irq-gic.h b/drivers/irqchip/irq-gic.h
> index 646e92614b2c..b03ec4bac795 100644
> --- a/drivers/irqchip/irq-gic.h
> +++ b/drivers/irqchip/irq-gic.h
> @@ -25,4 +25,6 @@ void gic_dist_save(struct gic_chip_data *gic);
>  void gic_dist_restore(struct gic_chip_data *gic);
>  void gic_handle_cascade_irq(struct irq_desc *desc);
>  
> +int of_gic_init(struct device *dev, struct gic_chip_data **gic);
> +
>  #endif /* _IRQ_GIC_H */

Otherwise, looks good.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny.

[toc] | [next] | [standalone]

#1414739 — Re: [PATCH V4 9/9] irqchip/gic: Add platform driver for non-root GICs that require RPM

On 04/06/16 11:10, Marc Zyngier wrote:
> On Thu, 12 May 2016 16:19:32 +0100
> Jon Hunter <jonathanh@nvidia.com> wrote:
> 
>> Add a platform driver to support non-root GICs that require runtime
>> power-management. Currently, only non-root GICs are supported because
>> the functions, smp_cross_call() and set_handle_irq(), that need to
>> be called for a root controller are located in the __init section and
>> so cannot be called by the platform driver.
>>
>> The GIC platform driver re-uses many functions from the existing GIC
>> driver including some functions to save and restore the GIC context
>> during power transitions. The functions for saving and restoring the
>> GIC context are currently only defined if CONFIG_CPU_PM is enabled and
>> to ensure that these functions are always defined when the platform
>> driver is enabled, a dependency on CONFIG_ARM_GIC_PM (which selects the
>> platform driver) has been added.
>>
>> In order to re-use the private GIC initialisation code, a new public
>> function, of_gic_init(), has been added which calls various private
>> functions to initialise the GIC.
>>
>> There is no specific suspend handling for GICs registered as platform
>> devices. Non-wakeup interrupts will be disabled by the kernel during
>> late suspend, however, this alone will not power down the GIC if
>> interrupts have been requested and not freed. Therefore, requestors of
>> non-wakeup interrupts will need to free them on entering suspend in
>> order to power-down the GIC.
>>
>> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
>> ---
>>  drivers/irqchip/Kconfig      |   6 ++
>>  drivers/irqchip/Makefile     |   1 +
>>  drivers/irqchip/irq-gic-pm.c | 187 +++++++++++++++++++++++++++++++++++++++++++
>>  drivers/irqchip/irq-gic.c    |  34 +++++++-
>>  drivers/irqchip/irq-gic.h    |   2 +
>>  5 files changed, 227 insertions(+), 3 deletions(-)
>>  create mode 100644 drivers/irqchip/irq-gic-pm.c
>>
>> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
>> index 81f88ada3a61..68f65c84fdfd 100644
>> --- a/drivers/irqchip/Kconfig
>> +++ b/drivers/irqchip/Kconfig
>> @@ -8,6 +8,12 @@ config ARM_GIC
>>  	select IRQ_DOMAIN_HIERARCHY
>>  	select MULTI_IRQ_HANDLER
>>  
>> +config ARM_GIC_PM
>> +	bool
>> +	depends on PM
>> +	select ARM_GIC
>> +	select PM_CLK
>> +
>>  config ARM_GIC_MAX_NR
>>  	int
>>  	default 2 if ARCH_REALVIEW
>> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
>> index f828244b44c2..eab28e80cd8d 100644
>> --- a/drivers/irqchip/Makefile
>> +++ b/drivers/irqchip/Makefile
>> @@ -24,6 +24,7 @@ obj-$(CONFIG_ARCH_SUNXI)		+= irq-sun4i.o
>>  obj-$(CONFIG_ARCH_SUNXI)		+= irq-sunxi-nmi.o
>>  obj-$(CONFIG_ARCH_SPEAR3XX)		+= spear-shirq.o
>>  obj-$(CONFIG_ARM_GIC)			+= irq-gic.o irq-gic-common.o
>> +obj-$(CONFIG_ARM_GIC_PM)		+= irq-gic-pm.o
>>  obj-$(CONFIG_REALVIEW_DT)		+= irq-gic-realview.o
>>  obj-$(CONFIG_ARM_GIC_V2M)		+= irq-gic-v2m.o
>>  obj-$(CONFIG_ARM_GIC_V3)		+= irq-gic-v3.o irq-gic-common.o
>> diff --git a/drivers/irqchip/irq-gic-pm.c b/drivers/irqchip/irq-gic-pm.c
>> new file mode 100644
>> index 000000000000..a14331007bcf
>> --- /dev/null
>> +++ b/drivers/irqchip/irq-gic-pm.c
>> @@ -0,0 +1,187 @@
>> +/*
>> + * Copyright (C) 2016 NVIDIA CORPORATION, All Rights Reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +#include <linux/module.h>
>> +#include <linux/clk.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm_clock.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/slab.h>
>> +
>> +#include "irq-gic.h"
>> +
>> +struct gic_clk_data {
>> +	unsigned int num_clocks;
>> +	const char *const *clocks;
>> +};
>> +
>> +static int gic_runtime_resume(struct device *dev)
>> +{
>> +	struct gic_chip_data *gic = dev_get_drvdata(dev);
>> +	int ret;
>> +
>> +	ret = pm_clk_resume(dev);
>> +	if (ret)
>> +		return ret;
>> +
>> +	/*
>> +	 * On the very first resume, the pointer to the driver data
>> +	 * will be NULL and this is intentional, because we do not
>> +	 * want to restore the GIC on the very first resume. So if
>> +	 * the pointer is not valid just return.
>> +	 */
>> +	if (!gic)
>> +		return 0;
>> +
>> +	gic_dist_restore(gic);
>> +	gic_cpu_restore(gic);
>> +
>> +	return 0;
>> +}
>> +
>> +static int gic_runtime_suspend(struct device *dev)
>> +{
>> +	struct gic_chip_data *gic = dev_get_drvdata(dev);
>> +
>> +	gic_dist_save(gic);
>> +	gic_cpu_save(gic);
>> +
>> +	return pm_clk_suspend(dev);
>> +}
>> +
>> +static int gic_get_clocks(struct device *dev, const struct gic_clk_data *data)
>> +{
>> +	struct clk *clk;
>> +	unsigned int i;
>> +	int ret;
>> +
>> +	if (!dev || !data)
>> +		return -EINVAL;
>> +
>> +	ret = pm_clk_create(dev);
>> +	if (ret)
>> +		return ret;
>> +
>> +	for (i = 0; i < data->num_clocks; i++) {
>> +		clk = of_clk_get_by_name(dev->of_node, data->clocks[i]);
>> +		if (IS_ERR(clk)) {
>> +			dev_err(dev, "failed to get clock %s\n",
>> +				data->clocks[i]);
>> +			ret = PTR_ERR(clk);
>> +			goto error;
>> +		}
>> +
>> +		ret = pm_clk_add_clk(dev, clk);
>> +		if (ret) {
>> +			dev_err(dev, "failed to add clock at index %d\n", i);
>> +			clk_put(clk);
>> +			goto error;
>> +		}
>> +	}
>> +
>> +	return 0;
>> +
>> +error:
>> +	pm_clk_destroy(dev);
>> +
>> +	return ret;
>> +}
>> +
>> +static int gic_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	const struct gic_clk_data *data;
>> +	struct gic_chip_data *gic;
>> +	int ret, irq;
>> +
>> +	data = of_device_get_match_data(&pdev->dev);
>> +	if (!data) {
>> +		dev_err(&pdev->dev, "no device match found\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	irq = irq_of_parse_and_map(dev->of_node, 0);
>> +	if (!irq) {
>> +		dev_err(dev, "no parent interrupt found!\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	ret = gic_get_clocks(dev, data);
>> +	if (ret)
>> +		goto irq_dispose;
>> +
>> +	pm_runtime_enable(dev);
>> +
>> +	ret = pm_runtime_get_sync(dev);
>> +	if (ret < 0)
>> +		goto rpm_disable;
>> +
>> +	ret = of_gic_init(dev, &gic);
>> +	if (ret)
>> +		goto rpm_put;
>> +
>> +	irq_set_chained_handler_and_data(irq, gic_handle_cascade_irq, gic);
> 
> nit: Rather than exporting the gic_handle_cascade entry point, I'd
> rather you exported a helper from the GIC driver. Something like:
> 
> void gic_setup_cascade(int irq, struct gic_data *gic);
> 
> and do the handler registration there. Alternatively, you could also
> move the irq parsing and handler registration into of_gic_init, and
> have this single initialization entry point.

Ok, yes I will do the latter.

>> +
>> +	platform_set_drvdata(pdev, gic);
>> +
>> +	pm_runtime_put(dev);
>> +
>> +	dev_info(dev, "GIC IRQ controller registered\n");
>> +
>> +	return 0;
>> +
>> +rpm_put:
>> +	pm_runtime_put_sync(dev);
>> +rpm_disable:
>> +	pm_runtime_disable(dev);
>> +	pm_clk_destroy(dev);
>> +irq_dispose:
>> +	irq_dispose_mapping(irq);
>> +
>> +	return ret;
>> +}
>> +
>> +static const struct dev_pm_ops gic_pm_ops = {
>> +	SET_RUNTIME_PM_OPS(gic_runtime_suspend,
>> +			   gic_runtime_resume, NULL)
>> +};
>> +
>> +static const char * const gic400_clocks[] = {
>> +	"clk",
>> +};
>> +
>> +static const struct gic_clk_data gic400_data = {
>> +	.num_clocks = ARRAY_SIZE(gic400_clocks),
>> +	.clocks = gic400_clocks,
>> +};
>> +
>> +static const struct of_device_id gic_match[] = {
>> +	{ .compatible = "nvidia,tegra210-agic",	.data = &gic400_data },
>> +	{},
>> +};
>> +MODULE_DEVICE_TABLE(of, gic_match);
>> +
>> +static struct platform_driver gic_driver = {
>> +	.probe		= gic_probe,
>> +	.driver		= {
>> +		.name	= "gic",
>> +		.of_match_table	= gic_match,
>> +		.pm	= &gic_pm_ops,
>> +	}
>> +};
>> +
>> +builtin_platform_driver(gic_driver);
>> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
>> index 9f8ab124898b..e65090f7afa4 100644
>> --- a/drivers/irqchip/irq-gic.c
>> +++ b/drivers/irqchip/irq-gic.c
>> @@ -76,7 +76,7 @@ struct gic_chip_data {
>>  	void __iomem *raw_dist_base;
>>  	void __iomem *raw_cpu_base;
>>  	u32 percpu_offset;
>> -#ifdef CONFIG_CPU_PM
>> +#if defined(CONFIG_CPU_PM) || defined(ARM_GIC_PM)
> 
> Shouldn't that be CONFIG_ARM_GIC_PM?


Oops yes, will fix.

>>  	u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
>>  	u32 saved_spi_active[DIV_ROUND_UP(1020, 32)];
>>  	u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
>> @@ -526,7 +526,7 @@ int gic_cpu_if_down(unsigned int gic_nr)
>>  	return 0;
>>  }
>>  
>> -#ifdef CONFIG_CPU_PM
>> +#if defined(CONFIG_CPU_PM) || defined(ARM_GIC_PM)
> 
> Same here?

Indeed! Cheers.

>>  /*
>>   * Saves the GIC distributor registers during suspend or idle.  Must be called
>>   * with interrupts disabled but before powering down the GIC.  After calling
>> @@ -1297,6 +1297,30 @@ error:
>>  	return -ENOMEM;
>>  }
>>  
>> +int of_gic_init(struct device *dev, struct gic_chip_data **gic)
>> +{
>> +	int ret;
>> +
>> +	if (!dev || !dev->of_node || !gic)
>> +		return -EINVAL;
>> +
>> +	*gic = devm_kzalloc(dev, sizeof(**gic), GFP_KERNEL);
>> +	if (!*gic)
>> +		return -ENOMEM;
>> +
>> +	gic_init_chip(*gic, dev, dev->of_node->name, false);
>> +
>> +	ret = gic_of_setup(*gic, dev->of_node);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = gic_init_bases(*gic, -1, &dev->of_node->fwnode);
>> +	if (ret)
>> +		gic_teardown(*gic);
>> +
>> +	return ret;
>> +}
>> +
>>  int __init
>>  gic_of_init(struct device_node *node, struct device_node *parent)
>>  {
>> @@ -1351,7 +1375,11 @@ IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init);
>>  IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
>>  IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
>>  IRQCHIP_DECLARE(pl390, "arm,pl390", gic_of_init);
>> -
>> +#else
>> +int of_gic_init(struct device *dev, struct gic_chip_data **gic)
>> +{
>> +	return -ENOTSUPP;
>> +}
>>  #endif
>>  
>>  #ifdef CONFIG_ACPI
>> diff --git a/drivers/irqchip/irq-gic.h b/drivers/irqchip/irq-gic.h
>> index 646e92614b2c..b03ec4bac795 100644
>> --- a/drivers/irqchip/irq-gic.h
>> +++ b/drivers/irqchip/irq-gic.h
>> @@ -25,4 +25,6 @@ void gic_dist_save(struct gic_chip_data *gic);
>>  void gic_dist_restore(struct gic_chip_data *gic);
>>  void gic_handle_cascade_irq(struct irq_desc *desc);
>>  
>> +int of_gic_init(struct device *dev, struct gic_chip_data **gic);
>> +
>>  #endif /* _IRQ_GIC_H */
> 
> Otherwise, looks good.

Thanks!
Jon

-- 
nvpublic

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web