Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1413978 > unrolled thread

[PATCH 3.10 000/143] 3.10.102-stable review

Back to article view | Back to linux.kernel

Contents

  [PATCH 3.10 000/143] 3.10.102-stable review Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 049/143] Input: ati_remote2 - fix crashes on detecting device with invalid descriptor Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 036/143] splice: handle zero nr_pages in splice_to_pipe() Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 124/143] packet: fix heap info leak in PACKET_DIAG_MCLIST sock_diag interface Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 038/143] xtensa: clear all DBREAKC registers on start Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 016/143] be2iscsi: set the boot_kset pointer to NULL in case of failure Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 123/143] route: do not cache fib route info on local routes with oif Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 077/143] ext4: add lockdep annotations for i_data_sem Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 048/143] Input: ims-pcu - sanity check against missing interfaces Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 113/143] USB: serial: cp210x: add ID for Link ECU Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 046/143] tracing: Fix trace_printk() to print when not using bprintk() Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 076/143] usb: renesas_usbhs: disable TX IRQ before starting TX DMAC transfer Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 106/143] clk: versatile: sp810: support reentrance Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 143/143] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios() Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 134/143] mfd: omap-usb-tll: Fix scheduling while atomic BUG Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 133/143] ring-buffer: Prevent overflow of size in ring_buffer_resize() Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 061/143] ipv6: re-enable fragment header matching in ipv6_find_hdr Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 132/143] ring-buffer: Use long for nr_pages to avoid overflow failures Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 086/143] nl80211: check netlink protocol in socket release notification Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 006/143] KVM: i8254: change PIT discard tick policy Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 090/143] ASoC: s3c24xx: use const snd_soc_component_driver pointer Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 012/143] x86, processor-flags: Fix the datatypes and add bit number defines Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 085/143] crypto: gcm - Fix rfc4543 decryption crash Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 024/143] USB: serial: cp210x: Adding GE Healthcare Device ID Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 107/143] lpfc: fix misleading indentation Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 035/143] watchdog: rc32434_wdt: fix ioctl error handling Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 020/143] USB: usb_driver_claim_interface: add sanity checking Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 141/143] USB: serial: option: add support for Cinterion PH8 and AHxx Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 102/143] ARM: OMAP3: Add cpuidle parameters table for omap3430 Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 074/143] ip6_tunnel: set rtnl_link_ops before calling register_netdevice Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 008/143] EDAC, amd64_edac: Shift wrapping issue in f1x_get_norm_dct_addr() Willy Tarreau <w@1wt.eu> - 2016-06-05 12:30 +0200
    [PATCH 3.10 028/143] net: irda: Fix use-after-free in irtty_open() Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 064/143] udp6: fix UDP/IPv6 encap resubmit path Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 073/143] ipv6: l2tp: fix a potential issue in l2tp_ip6_recv Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 025/143] USB: option: add "D-Link DWM-221 B1" device id Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 138/143] USB: serial: keyspan: fix use-after-free in probe error path Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 027/143] Input: powermate - fix oops with malicious USB descriptors Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 087/143] Input: gtco - fix crash on detecting device without endpoints Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 080/143] [media] usbvision-video: fix memory leak of alt_max_pkt_size Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 122/143] decnet: Do not build routes to devices without decnet private data. Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 088/143] i2c: cpm: Fix build break due to incompatible pointer types Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 007/143] KVM: fix spin_lock_init order on x86 Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 098/143] drivers/misc/ad525x_dpot: AD5274 fix RDAC read back errors Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 116/143] powerpc: scan_features() updates incorrect bits for REAL_LE Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 051/143] ocfs2/dlm: fix BUG in dlm_move_lockres_to_recovery_list Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 063/143] usbnet: cleanup after bind() in probe() Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 112/143] ACPICA: Dispatcher: Update thread ID for recursive method calls Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 083/143] usb: xhci: fix wild pointers in xhci_mem_cleanup Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 011/143] x86: Rename X86_CR4_RDWRGSFS to X86_CR4_FSGSBASE Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 053/143] sched/cputime: Fix steal time accounting vs. CPU hotplug Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 014/143] sg: fix dxferp in from_to case Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 121/143] ARM: OMAP3: Fix booting with thumb2 kernel Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 056/143] parisc: Avoid function pointers for kernel exception routines Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 130/143] net: fix a kernel infoleak in x25 module Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 115/143] Input: ads7846 - correct the value got from SPI Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 096/143] misc/bmp085: Enable building as a module Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 101/143] perf stat: Document --detailed option Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 103/143] compiler-gcc: disable -ftracer for __noclone functions Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 089/143] EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callback Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 120/143] asmlinkage, pnp: Make variables used from assembler code visible Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 109/143] proc: prevent accessing /proc/<PID>/environ until it's ready Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 079/143] drm/radeon: hold reference to fences in radeon_sa_bo_new (3.17 and older) Willy Tarreau <w@1wt.eu> - 2016-06-05 12:40 +0200
    [PATCH 3.10 021/143] USB: mct_u232: add sanity checking in probe Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 111/143] MAINTAINERS: Remove asterisk from EFI directory names Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 068/143] ath9k: fix buffer overrun for ar9287 Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 071/143] qmi_wwan: add "D-Link DWM-221 B1" device id Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 015/143] aacraid: Fix memory leak in aac_fib_map_free Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 117/143] crypto: hash - Fix page length clamping in hash walk Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 110/143] batman-adv: Fix broadcast/ogm queue limit on a removed interface Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 065/143] sh_eth: fix NULL pointer dereference in sh_eth_ring_format() Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 137/143] Bluetooth: vhci: purge unhandled skbs Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 094/143] paride: make 'verbose' parameter an 'int' again Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 042/143] ipr: Fix regression when loading firmware Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 119/143] Input: max8997-haptic - fix NULL pointer dereference Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 052/143] mtd: onenand: fix deadlock in onenand_block_markbad Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 108/143] ARM: SoCFPGA: Fix secondary CPU startup in thumb2 kernel Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 099/143] include/linux/poison.h: fix LIST_POISON{1,2} offset Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 032/143] ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41. Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 078/143] HID: usbhid: fix inconsistent reset/resume/reset-resume behavior Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 045/143] tracing: Fix crash from reading trace_pipe with sendfile Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 005/143] x86: LLVMLinux: Fix "incomplete type const struct x86cpu_device_id" Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 070/143] ppp: take reference on channels netns Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 135/143] mmc: mmc: Fix partition switch timeout for some eMMCs Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 067/143] farsync: fix off-by-one bug in fst_add_one Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 039/143] md/raid5: Compare apples to apples (or sectors to sectors) Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 131/143] fs/cifs: correctly to anonymous authentication via NTLMSSP Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 082/143] usbvision: fix crash on detecting device with invalid configuration Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 041/143] ipr: Fix out-of-bounds null overwrite Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 019/143] USB: iowarrior: fix oops with malicious USB descriptors Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 092/143] workqueue: fix ghost PENDING flag while doing MQ IO Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 127/143] net: fix infoleak in rtnetlink Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 013/143] x86/iopl: Fix iopl capability check on Xen PV Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 129/143] net: bridge: fix old ioctl unlocked net device walk Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 126/143] net: fix infoleak in llc Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 100/143] Drivers: hv: vmbus: prevent cpu offlining on newer hypervisors Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 002/143] x86/iopl/64: Properly context-switch IOPL on Xen PV Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 029/143] 8250: use callbacks to access UART_DLL/UART_DLM Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 139/143] USB: serial: quatech2: fix use-after-free in probe error path Willy Tarreau <w@1wt.eu> - 2016-06-05 12:50 +0200
    [PATCH 3.10 001/143] pipe: Fix buffer offset after partially failed read Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 010/143] linux/const.h: Add _BITUL() and _BITULL() Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 026/143] pwc: Add USB id for Philips Spc880nc webcam Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 057/143] parisc: Fix kernel crash with reversed copy_from_user() Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 031/143] media: v4l2-compat-ioctl32: fix missing length copy in put_v4l2_buffer32 Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 084/143] usb: hcd: out of bounds access in for_each_companion Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 069/143] qlge: Fix receive packets drop. Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 142/143] tty: vt, return error when con_startup fails Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 136/143] mmc: longer timeout for long read time quirk Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 037/143] xtensa: ISS: don't hang if stdin EOF is reached Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 017/143] usb: retry reset if a device times out Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 097/143] rtc: vr41xx: Wire up alarm_irq_enable Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 003/143] ext4: fix NULL pointer dereference in ext4_mark_inode_dirty() Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 018/143] USB: cdc-acm: more sanity checking Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 044/143] tracing: Have preempt(irqs)off trace preempt disabled functions Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 040/143] rapidio/rionet: fix deadlock on SMP Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 066/143] net: Fix use after free in the recvmmsg exit path Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 091/143] efi: Fix out-of-bounds read in variable_matches() Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 072/143] ipv4: l2tp: fix a potential issue in l2tp_ip_recv Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 033/143] jbd2: fix FS corruption possibility in jbd2_journal_destroy() on umount path Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 034/143] bcache: fix cache_set_flush() NULL pointer dereference on OOM Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 062/143] cdc_ncm: toggle altsetting to force reset before setup Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 075/143] usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handler() Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 093/143] USB: usbip: fix potential out-of-bounds write Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 043/143] drm/radeon: Don't drop DP 2.7 Ghz link setup on some cards. Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 125/143] atl2: Disable unimplemented scatter/gather feature Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    [PATCH 3.10 009/143] PCI: Disable IO/MEM decoding for devices with non-compliant BARs Willy Tarreau <w@1wt.eu> - 2016-06-05 13:00 +0200
    Re: [PATCH 3.10 000/143] 3.10.102-stable review Guenter Roeck <linux@roeck-us.net> - 2016-06-07 05:50 +0200
      Re: [PATCH 3.10 000/143] 3.10.102-stable review Willy Tarreau <w@1wt.eu> - 2016-06-07 06:20 +0200
        Re: [PATCH 3.10 000/143] 3.10.102-stable review Guenter Roeck <linux@roeck-us.net> - 2016-06-07 06:40 +0200
          Re: [PATCH 3.10 000/143] 3.10.102-stable review Willy Tarreau <w@1wt.eu> - 2016-06-07 07:20 +0200
            Re: [PATCH 3.10 000/143] 3.10.102-stable review Guenter Roeck <linux@roeck-us.net> - 2016-06-07 08:00 +0200
              Re: [PATCH 3.10 000/143] 3.10.102-stable review Willy Tarreau <w@1wt.eu> - 2016-06-07 09:00 +0200
                Re: [PATCH 3.10 000/143] 3.10.102-stable review Willy Tarreau <w@1wt.eu> - 2016-06-07 20:00 +0200
                  Re: [PATCH 3.10 000/143] 3.10.102-stable review Guenter Roeck <linux@roeck-us.net> - 2016-06-07 20:30 +0200
                  Re: [PATCH 3.10 000/143] 3.10.102-stable review Guenter Roeck <linux@roeck-us.net> - 2016-06-08 03:00 +0200
                    Re: [PATCH 3.10 000/143] 3.10.102-stable review Willy Tarreau <w@1wt.eu> - 2016-06-08 07:30 +0200

Page 2 of 7 — ← Prev page 1 [2] 3 4 5 6 7  Next page →

#1413999 — [PATCH 3.10 090/143] ASoC: s3c24xx: use const snd_soc_component_driver pointer

From: Arnd Bergmann <arnd@arndb.de>

commit ba4bc32eaa39ba7687f0958ae90eec94da613b46 upstream.

An older patch to convert the API in the s3c i2s driver
ended up passing a const pointer into a function that takes
a non-const pointer, so we now get a warning:

sound/soc/samsung/s3c2412-i2s.c: In function 's3c2412_iis_dev_probe':
sound/soc/samsung/s3c2412-i2s.c:172:9: error: passing argument 3 of 's3c_i2sv2_register_component' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]

However, the s3c_i2sv2_register_component() function again
passes the pointer into another function taking a const, so
we just need to change its prototype.

Fixes: eca3b01d0885 ("ASoC: switch over to use snd_soc_register_component() on s3c i2s")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 sound/soc/samsung/s3c-i2s-v2.c | 2 +-
 sound/soc/samsung/s3c-i2s-v2.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/samsung/s3c-i2s-v2.c b/sound/soc/samsung/s3c-i2s-v2.c
index 20e98d1..38c36cd 100644
--- a/sound/soc/samsung/s3c-i2s-v2.c
+++ b/sound/soc/samsung/s3c-i2s-v2.c
@@ -732,7 +732,7 @@ static int s3c2412_i2s_resume(struct snd_soc_dai *dai)
 #endif
 
 int s3c_i2sv2_register_component(struct device *dev, int id,
-			   struct snd_soc_component_driver *cmp_drv,
+			   const struct snd_soc_component_driver *cmp_drv,
 			   struct snd_soc_dai_driver *dai_drv)
 {
 	struct snd_soc_dai_ops *ops = drv->ops;
diff --git a/sound/soc/samsung/s3c-i2s-v2.h b/sound/soc/samsung/s3c-i2s-v2.h
index 90abab3..d068414 100644
--- a/sound/soc/samsung/s3c-i2s-v2.h
+++ b/sound/soc/samsung/s3c-i2s-v2.h
@@ -101,7 +101,7 @@ extern int s3c_i2sv2_probe(struct snd_soc_dai *dai,
  * soc core.
  */
 extern int s3c_i2sv2_register_component(struct device *dev, int id,
-					struct snd_soc_component_driver *cmp_drv,
+					const struct snd_soc_component_driver *cmp_drv,
 					struct snd_soc_dai_driver *dai_drv);
 
 #endif /* __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H */
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414000 — [PATCH 3.10 012/143] x86, processor-flags: Fix the datatypes and add bit number defines

From: "H. Peter Anvin" <hpa@linux.intel.com>

commit d1fbefcb3aa608599a3c9e4582cbeeb6ba6c8939 upstream.

The control registers are unsigned long (32 bits on i386, 64 bits on
x86-64), and so make that manifest in the data type for the various
constants.  Add defines with a _BIT suffix which defines the bit
number, as opposed to the bit mask.

This should resolve some issues with ~bitmask that Linus discovered.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-cwckhbrib2aux1qbteaebij0@git.kernel.org
[wt: backported to 3.10 only to keep next patch clean]

Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 arch/x86/include/uapi/asm/processor-flags.h | 154 +++++++++++++++++++---------
 1 file changed, 104 insertions(+), 50 deletions(-)

diff --git a/arch/x86/include/uapi/asm/processor-flags.h b/arch/x86/include/uapi/asm/processor-flags.h
index 1b34df5..180a0c3 100644
--- a/arch/x86/include/uapi/asm/processor-flags.h
+++ b/arch/x86/include/uapi/asm/processor-flags.h
@@ -2,75 +2,129 @@
 #define _UAPI_ASM_X86_PROCESSOR_FLAGS_H
 /* Various flags defined: can be included from assembler. */
 
+#include <linux/const.h>
+
 /*
  * EFLAGS bits
  */
-#define X86_EFLAGS_CF	0x00000001 /* Carry Flag */
-#define X86_EFLAGS_FIXED 0x00000002 /* Bit 1 - always on */
-#define X86_EFLAGS_PF	0x00000004 /* Parity Flag */
-#define X86_EFLAGS_AF	0x00000010 /* Auxiliary carry Flag */
-#define X86_EFLAGS_ZF	0x00000040 /* Zero Flag */
-#define X86_EFLAGS_SF	0x00000080 /* Sign Flag */
-#define X86_EFLAGS_TF	0x00000100 /* Trap Flag */
-#define X86_EFLAGS_IF	0x00000200 /* Interrupt Flag */
-#define X86_EFLAGS_DF	0x00000400 /* Direction Flag */
-#define X86_EFLAGS_OF	0x00000800 /* Overflow Flag */
-#define X86_EFLAGS_IOPL	0x00003000 /* IOPL mask */
-#define X86_EFLAGS_NT	0x00004000 /* Nested Task */
-#define X86_EFLAGS_RF	0x00010000 /* Resume Flag */
-#define X86_EFLAGS_VM	0x00020000 /* Virtual Mode */
-#define X86_EFLAGS_AC	0x00040000 /* Alignment Check */
-#define X86_EFLAGS_VIF	0x00080000 /* Virtual Interrupt Flag */
-#define X86_EFLAGS_VIP	0x00100000 /* Virtual Interrupt Pending */
-#define X86_EFLAGS_ID	0x00200000 /* CPUID detection flag */
+#define X86_EFLAGS_CF_BIT	0 /* Carry Flag */
+#define X86_EFLAGS_CF		_BITUL(X86_EFLAGS_CF_BIT)
+#define X86_EFLAGS_FIXED_BIT	1 /* Bit 1 - always on */
+#define X86_EFLAGS_FIXED	_BITUL(X86_EFLAGS_FIXED_BIT)
+#define X86_EFLAGS_PF_BIT	2 /* Parity Flag */
+#define X86_EFLAGS_PF		_BITUL(X86_EFLAGS_PF_BIT)
+#define X86_EFLAGS_AF_BIT	4 /* Auxiliary carry Flag */
+#define X86_EFLAGS_AF		_BITUL(X86_EFLAGS_AF_BIT)
+#define X86_EFLAGS_ZF_BIT	6 /* Zero Flag */
+#define X86_EFLAGS_ZF		_BITUL(X86_EFLAGS_ZF_BIT)
+#define X86_EFLAGS_SF_BIT	7 /* Sign Flag */
+#define X86_EFLAGS_SF		_BITUL(X86_EFLAGS_SF_BIT)
+#define X86_EFLAGS_TF_BIT	8 /* Trap Flag */
+#define X86_EFLAGS_TF		_BITUL(X86_EFLAGS_TF_BIT)
+#define X86_EFLAGS_IF_BIT	9 /* Interrupt Flag */
+#define X86_EFLAGS_IF		_BITUL(X86_EFLAGS_IF_BIT)
+#define X86_EFLAGS_DF_BIT	10 /* Direction Flag */
+#define X86_EFLAGS_DF		_BITUL(X86_EFLAGS_DF_BIT)
+#define X86_EFLAGS_OF_BIT	11 /* Overflow Flag */
+#define X86_EFLAGS_OF		_BITUL(X86_EFLAGS_OF_BIT)
+#define X86_EFLAGS_IOPL_BIT	12 /* I/O Privilege Level (2 bits) */
+#define X86_EFLAGS_IOPL		(_AC(3,UL) << X86_EFLAGS_IOPL_BIT)
+#define X86_EFLAGS_NT_BIT	14 /* Nested Task */
+#define X86_EFLAGS_NT		_BITUL(X86_EFLAGS_NT_BIT)
+#define X86_EFLAGS_RF_BIT	16 /* Resume Flag */
+#define X86_EFLAGS_RF		_BITUL(X86_EFLAGS_RF_BIT)
+#define X86_EFLAGS_VM_BIT	17 /* Virtual Mode */
+#define X86_EFLAGS_VM		_BITUL(X86_EFLAGS_VM_BIT)
+#define X86_EFLAGS_AC_BIT	18 /* Alignment Check/Access Control */
+#define X86_EFLAGS_AC		_BITUL(X86_EFLAGS_AC_BIT)
+#define X86_EFLAGS_AC_BIT	18 /* Alignment Check/Access Control */
+#define X86_EFLAGS_AC		_BITUL(X86_EFLAGS_AC_BIT)
+#define X86_EFLAGS_VIF_BIT	19 /* Virtual Interrupt Flag */
+#define X86_EFLAGS_VIF		_BITUL(X86_EFLAGS_VIF_BIT)
+#define X86_EFLAGS_VIP_BIT	20 /* Virtual Interrupt Pending */
+#define X86_EFLAGS_VIP		_BITUL(X86_EFLAGS_VIP_BIT)
+#define X86_EFLAGS_ID_BIT	21 /* CPUID detection */
+#define X86_EFLAGS_ID		_BITUL(X86_EFLAGS_ID_BIT)
 
 /*
  * Basic CPU control in CR0
  */
-#define X86_CR0_PE	0x00000001 /* Protection Enable */
-#define X86_CR0_MP	0x00000002 /* Monitor Coprocessor */
-#define X86_CR0_EM	0x00000004 /* Emulation */
-#define X86_CR0_TS	0x00000008 /* Task Switched */
-#define X86_CR0_ET	0x00000010 /* Extension Type */
-#define X86_CR0_NE	0x00000020 /* Numeric Error */
-#define X86_CR0_WP	0x00010000 /* Write Protect */
-#define X86_CR0_AM	0x00040000 /* Alignment Mask */
-#define X86_CR0_NW	0x20000000 /* Not Write-through */
-#define X86_CR0_CD	0x40000000 /* Cache Disable */
-#define X86_CR0_PG	0x80000000 /* Paging */
+#define X86_CR0_PE_BIT		0 /* Protection Enable */
+#define X86_CR0_PE		_BITUL(X86_CR0_PE_BIT)
+#define X86_CR0_MP_BIT		1 /* Monitor Coprocessor */
+#define X86_CR0_MP		_BITUL(X86_CR0_MP_BIT)
+#define X86_CR0_EM_BIT		2 /* Emulation */
+#define X86_CR0_EM		_BITUL(X86_CR0_EM_BIT)
+#define X86_CR0_TS_BIT		3 /* Task Switched */
+#define X86_CR0_TS		_BITUL(X86_CR0_TS_BIT)
+#define X86_CR0_ET_BIT		4 /* Extension Type */
+#define X86_CR0_ET		_BITUL(X86_CR0_ET_BIT)
+#define X86_CR0_NE_BIT		5 /* Numeric Error */
+#define X86_CR0_NE		_BITUL(X86_CR0_NE_BIT)
+#define X86_CR0_WP_BIT		16 /* Write Protect */
+#define X86_CR0_WP		_BITUL(X86_CR0_WP_BIT)
+#define X86_CR0_AM_BIT		18 /* Alignment Mask */
+#define X86_CR0_AM		_BITUL(X86_CR0_AM_BIT)
+#define X86_CR0_NW_BIT		29 /* Not Write-through */
+#define X86_CR0_NW		_BITUL(X86_CR0_NW_BIT)
+#define X86_CR0_CD_BIT		30 /* Cache Disable */
+#define X86_CR0_CD		_BITUL(X86_CR0_CD_BIT)
+#define X86_CR0_PG_BIT		31 /* Paging */
+#define X86_CR0_PG		_BITUL(X86_CR0_PG_BIT)
 
 /*
  * Paging options in CR3
  */
-#define X86_CR3_PWT	0x00000008 /* Page Write Through */
-#define X86_CR3_PCD	0x00000010 /* Page Cache Disable */
-#define X86_CR3_PCID_MASK 0x00000fff /* PCID Mask */
+#define X86_CR3_PWT_BIT		3 /* Page Write Through */
+#define X86_CR3_PWT		_BITUL(X86_CR3_PWT_BIT)
+#define X86_CR3_PCD_BIT		4 /* Page Cache Disable */
+#define X86_CR3_PCD		_BITUL(X86_CR3_PCD_BIT)
+#define X86_CR3_PCID_MASK	_AC(0x00000fff,UL) /* PCID Mask */
 
 /*
  * Intel CPU features in CR4
  */
-#define X86_CR4_VME	0x00000001 /* enable vm86 extensions */
-#define X86_CR4_PVI	0x00000002 /* virtual interrupts flag enable */
-#define X86_CR4_TSD	0x00000004 /* disable time stamp at ipl 3 */
-#define X86_CR4_DE	0x00000008 /* enable debugging extensions */
-#define X86_CR4_PSE	0x00000010 /* enable page size extensions */
-#define X86_CR4_PAE	0x00000020 /* enable physical address extensions */
-#define X86_CR4_MCE	0x00000040 /* Machine check enable */
-#define X86_CR4_PGE	0x00000080 /* enable global pages */
-#define X86_CR4_PCE	0x00000100 /* enable performance counters at ipl 3 */
-#define X86_CR4_OSFXSR	0x00000200 /* enable fast FPU save and restore */
-#define X86_CR4_OSXMMEXCPT 0x00000400 /* enable unmasked SSE exceptions */
-#define X86_CR4_VMXE	0x00002000 /* enable VMX virtualization */
-#define X86_CR4_FSGSBASE 0x00010000 /* enable RDWRGSFS support */
-#define X86_CR4_PCIDE	0x00020000 /* enable PCID support */
-#define X86_CR4_OSXSAVE 0x00040000 /* enable xsave and xrestore */
-#define X86_CR4_SMEP	0x00100000 /* enable SMEP support */
-#define X86_CR4_SMAP	0x00200000 /* enable SMAP support */
+#define X86_CR4_VME_BIT		0 /* enable vm86 extensions */
+#define X86_CR4_VME		_BITUL(X86_CR4_VME_BIT)
+#define X86_CR4_PVI_BIT		1 /* virtual interrupts flag enable */
+#define X86_CR4_PVI		_BITUL(X86_CR4_PVI_BIT)
+#define X86_CR4_TSD_BIT		2 /* disable time stamp at ipl 3 */
+#define X86_CR4_TSD		_BITUL(X86_CR4_TSD_BIT)
+#define X86_CR4_DE_BIT		3 /* enable debugging extensions */
+#define X86_CR4_DE		_BITUL(X86_CR4_DE_BIT)
+#define X86_CR4_PSE_BIT		4 /* enable page size extensions */
+#define X86_CR4_PSE		_BITUL(X86_CR4_PSE_BIT)
+#define X86_CR4_PAE_BIT		5 /* enable physical address extensions */
+#define X86_CR4_PAE		_BITUL(X86_CR4_PAE_BIT)
+#define X86_CR4_MCE_BIT		6 /* Machine check enable */
+#define X86_CR4_MCE		_BITUL(X86_CR4_MCE_BIT)
+#define X86_CR4_PGE_BIT		7 /* enable global pages */
+#define X86_CR4_PGE		_BITUL(X86_CR4_PGE_BIT)
+#define X86_CR4_PCE_BIT		8 /* enable performance counters at ipl 3 */
+#define X86_CR4_PCE		_BITUL(X86_CR4_PCE_BIT)
+#define X86_CR4_OSFXSR_BIT	9 /* enable fast FPU save and restore */
+#define X86_CR4_OSFXSR		_BITUL(X86_CR4_OSFXSR_BIT)
+#define X86_CR4_OSXMMEXCPT_BIT	10 /* enable unmasked SSE exceptions */
+#define X86_CR4_OSXMMEXCPT	_BITUL(X86_CR4_OSXMMEXCPT_BIT)
+#define X86_CR4_VMXE_BIT	13 /* enable VMX virtualization */
+#define X86_CR4_VMXE		_BITUL(X86_CR4_VMXE_BIT)
+#define X86_CR4_SMXE_BIT	14 /* enable safer mode (TXT) */
+#define X86_CR4_SMXE		_BITUL(X86_CR4_SMXE_BIT)
+#define X86_CR4_FSGSBASE_BIT	16 /* enable RDWRFSGS support */
+#define X86_CR4_FSGSBASE	_BITUL(X86_CR4_FSGSBASE_BIT)
+#define X86_CR4_PCIDE_BIT	17 /* enable PCID support */
+#define X86_CR4_PCIDE		_BITUL(X86_CR4_PCIDE_BIT)
+#define X86_CR4_OSXSAVE_BIT	18 /* enable xsave and xrestore */
+#define X86_CR4_OSXSAVE		_BITUL(X86_CR4_OSXSAVE_BIT)
+#define X86_CR4_SMEP_BIT	20 /* enable SMEP support */
+#define X86_CR4_SMEP		_BITUL(X86_CR4_SMEP_BIT)
+#define X86_CR4_SMAP_BIT	21 /* enable SMAP support */
+#define X86_CR4_SMAP		_BITUL(X86_CR4_SMAP_BIT)
 
 /*
  * x86-64 Task Priority Register, CR8
  */
-#define X86_CR8_TPR	0x0000000F /* task priority register */
+#define X86_CR8_TPR		_AC(0x0000000f,UL) /* task priority register */
 
 /*
  * AMD and Transmeta use MSRs for configuration; see <asm/msr-index.h>
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414001 — [PATCH 3.10 085/143] crypto: gcm - Fix rfc4543 decryption crash

From: Herbert Xu <herbert@gondor.apana.org.au>

This bug has already bee fixed upstream since 4.2.  However, it
was fixed during the AEAD conversion so no fix was backported to
the older kernels.

When we do an RFC 4543 decryption, we will end up writing the
ICV beyond the end of the dst buffer.  This should lead to a
crash but for some reason it was never noticed.

This patch fixes it by only writing back the ICV for encryption.

Fixes: d733ac90f9fe ("crypto: gcm - fix rfc4543 to handle async...")
Reported-by: Patrick Meyer <patrick.meyer@vasgard.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 crypto/gcm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/crypto/gcm.c b/crypto/gcm.c
index b4c2520..cd97cdd 100644
--- a/crypto/gcm.c
+++ b/crypto/gcm.c
@@ -1173,6 +1173,9 @@ static struct aead_request *crypto_rfc4543_crypt(struct aead_request *req,
 	aead_request_set_tfm(subreq, ctx->child);
 	aead_request_set_callback(subreq, req->base.flags, crypto_rfc4543_done,
 				  req);
+	if (!enc)
+		aead_request_set_callback(subreq, req->base.flags,
+					  req->base.complete, req->base.data);
 	aead_request_set_crypt(subreq, cipher, cipher, enc ? 0 : authsize, iv);
 	aead_request_set_assoc(subreq, assoc, assoclen);
 
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414002 — [PATCH 3.10 024/143] USB: serial: cp210x: Adding GE Healthcare Device ID

From: Martyn Welch <martyn.welch@collabora.co.uk>

commit cddc9434e3dcc37a85c4412fb8e277d3a582e456 upstream.

The CP2105 is used in the GE Healthcare Remote Alarm Box, with the
Manufacturer ID of 0x1901 and Product ID of 0x0194.

Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 drivers/usb/serial/cp210x.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 84b7704..a4003d4 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -164,6 +164,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
 	{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
 	{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
+	{ USB_DEVICE(0x1901, 0x0194) },	/* GE Healthcare Remote Alarm Box */
 	{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414004 — [PATCH 3.10 107/143] lpfc: fix misleading indentation

From: Arnd Bergmann <arnd@arndb.de>

commit aeb6641f8ebdd61939f462a8255b316f9bfab707 upstream.

gcc-6 complains about the indentation of the lpfc_destroy_vport_work_array()
call in lpfc_online(), which clearly doesn't look right:

drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_online':
drivers/scsi/lpfc/lpfc_init.c:2880:3: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation]
   lpfc_destroy_vport_work_array(phba, vports);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/lpfc/lpfc_init.c:2863:2: note: ...this 'if' clause, but it is not
  if (vports != NULL)
  ^~

Looking at the patch that introduced this code, it's clear that the
behavior is correct and the indentation is wrong.

This fixes the indentation and adds curly braces around the previous
if() block for clarity, as that is most likely what caused the code
to be misindented in the first place.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 549e55cd2a1b ("[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_list")
Reviewed-by: Sebastian Herbszt <herbszt@gmx.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 drivers/scsi/lpfc/lpfc_init.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index cb465b2..e6e0679 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -2684,7 +2684,7 @@ lpfc_online(struct lpfc_hba *phba)
 	}
 
 	vports = lpfc_create_vport_work_array(phba);
-	if (vports != NULL)
+	if (vports != NULL) {
 		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			struct Scsi_Host *shost;
 			shost = lpfc_shost_from_vport(vports[i]);
@@ -2701,7 +2701,8 @@ lpfc_online(struct lpfc_hba *phba)
 			}
 			spin_unlock_irq(shost->host_lock);
 		}
-		lpfc_destroy_vport_work_array(phba, vports);
+	}
+	lpfc_destroy_vport_work_array(phba, vports);
 
 	lpfc_unblock_mgmt_io(phba);
 	return 0;
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414005 — [PATCH 3.10 035/143] watchdog: rc32434_wdt: fix ioctl error handling

From: "Michael S. Tsirkin" <mst@redhat.com>

commit 10e7ac22cdd4d211cef99afcb9371b70cb175be6 upstream.

Calling return copy_to_user(...) in an ioctl will not do the right thing
if there's a pagefault: copy_to_user returns the number of bytes not
copied in this case.

Fix up watchdog/rc32434_wdt to do
	return copy_to_user(...)) ?  -EFAULT : 0;

instead.

Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 drivers/watchdog/rc32434_wdt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
index f78bc00..ea8f582 100644
--- a/drivers/watchdog/rc32434_wdt.c
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -237,7 +237,7 @@ static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd,
 			return -EINVAL;
 		/* Fall through */
 	case WDIOC_GETTIMEOUT:
-		return copy_to_user(argp, &timeout, sizeof(int));
+		return copy_to_user(argp, &timeout, sizeof(int)) ? -EFAULT : 0;
 	default:
 		return -ENOTTY;
 	}
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414006 — [PATCH 3.10 020/143] USB: usb_driver_claim_interface: add sanity checking

From: Oliver Neukum <oneukum@suse.com>

commit 0b818e3956fc1ad976bee791eadcbb3b5fec5bfd upstream.

Attacks that trick drivers into passing a NULL pointer
to usb_driver_claim_interface() using forged descriptors are
known. This thwarts them by sanity checking.

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 drivers/usb/core/driver.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 2cdd507..f7310dd 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -461,11 +461,15 @@ static int usb_unbind_interface(struct device *dev)
 int usb_driver_claim_interface(struct usb_driver *driver,
 				struct usb_interface *iface, void *priv)
 {
-	struct device *dev = &iface->dev;
+	struct device *dev;
 	struct usb_device *udev;
 	int retval = 0;
 	int lpm_disable_error;
 
+	if (!iface)
+		return -ENODEV;
+
+	dev = &iface->dev;
 	if (dev->driver)
 		return -EBUSY;
 
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414007 — [PATCH 3.10 141/143] USB: serial: option: add support for Cinterion PH8 and AHxx

From: Schemmel Hans-Christoph <Hans-Christoph.Schemmel@gemalto.com>

commit 444f94e9e625f6ec6bbe2cb232a6451c637f35a3 upstream.

Added support for Gemalto's Cinterion PH8 and AHxx products
with 2 RmNet Interfaces and products with 1 RmNet + 1 USB Audio interface.

In addition some minor renaming and formatting.

Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com>
[johan: sort current entries and trim trailing whitespace ]
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 drivers/usb/serial/option.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 99c89d7..bcb6f5c 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -375,18 +375,22 @@ static void option_instat_callback(struct urb *urb);
 #define HAIER_PRODUCT_CE81B			0x10f8
 #define HAIER_PRODUCT_CE100			0x2009
 
-/* Cinterion (formerly Siemens) products */
-#define SIEMENS_VENDOR_ID				0x0681
-#define CINTERION_VENDOR_ID				0x1e2d
+/* Gemalto's Cinterion products (formerly Siemens) */
+#define SIEMENS_VENDOR_ID			0x0681
+#define CINTERION_VENDOR_ID			0x1e2d
+#define CINTERION_PRODUCT_HC25_MDMNET		0x0040
 #define CINTERION_PRODUCT_HC25_MDM		0x0047
-#define CINTERION_PRODUCT_HC25_MDMNET	0x0040
+#define CINTERION_PRODUCT_HC28_MDMNET		0x004A /* same for HC28J */
 #define CINTERION_PRODUCT_HC28_MDM		0x004C
-#define CINTERION_PRODUCT_HC28_MDMNET	0x004A /* same for HC28J */
 #define CINTERION_PRODUCT_EU3_E			0x0051
 #define CINTERION_PRODUCT_EU3_P			0x0052
 #define CINTERION_PRODUCT_PH8			0x0053
 #define CINTERION_PRODUCT_AHXX			0x0055
 #define CINTERION_PRODUCT_PLXX			0x0060
+#define CINTERION_PRODUCT_PH8_2RMNET		0x0082
+#define CINTERION_PRODUCT_PH8_AUDIO		0x0083
+#define CINTERION_PRODUCT_AHXX_2RMNET		0x0084
+#define CINTERION_PRODUCT_AHXX_AUDIO		0x0085
 
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
@@ -641,6 +645,10 @@ static const struct option_blacklist_info telit_le922_blacklist_usbcfg3 = {
 	.reserved = BIT(1) | BIT(2) | BIT(3),
 };
 
+static const struct option_blacklist_info cinterion_rmnet2_blacklist = {
+	.reserved = BIT(4) | BIT(5),
+};
+
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -1712,7 +1720,13 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX, 0xff) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, 
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_2RMNET, 0xff),
+		.driver_info = (kernel_ulong_t)&cinterion_rmnet2_blacklist },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_AUDIO, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) },
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414008 — [PATCH 3.10 102/143] ARM: OMAP3: Add cpuidle parameters table for omap3430

From: Pali Rohár <pali.rohar@gmail.com>

commit 98f42221501353067251fbf11e732707dbb68ce3 upstream.

Based on CPU type choose generic omap3 or omap3430 specific cpuidle
parameters. Parameters for omap3430 were measured on Nokia N900 device and
added by commit 5a1b1d3a9efa ("OMAP3: RX-51: Pass cpu idle parameters")
which were later removed by commit 231900afba52 ("ARM: OMAP3: cpuidle -
remove rx51 cpuidle parameters table") due to huge code complexity.

This patch brings cpuidle parameters for omap3430 devices again, but uses
simple condition based on CPU type.

Fixes: 231900afba52 ("ARM: OMAP3: cpuidle - remove rx51 cpuidle
parameters table")
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 arch/arm/mach-omap2/cpuidle34xx.c | 69 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 68 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index e18709d..38e1bdc 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -34,6 +34,7 @@
 #include "pm.h"
 #include "control.h"
 #include "common.h"
+#include "soc.h"
 
 /* Mach specific information to be recorded in the C-state driver_data */
 struct omap3_idle_statedata {
@@ -322,6 +323,69 @@ static struct cpuidle_driver omap3_idle_driver = {
 	.safe_state_index = 0,
 };
 
+/*
+ * Numbers based on measurements made in October 2009 for PM optimized kernel
+ * with CPU freq enabled on device Nokia N900. Assumes OPP2 (main idle OPP,
+ * and worst case latencies).
+ */
+static struct cpuidle_driver omap3430_idle_driver = {
+	.name             = "omap3430_idle",
+	.owner            = THIS_MODULE,
+	.states = {
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 110 + 162,
+			.target_residency = 5,
+			.name		  = "C1",
+			.desc		  = "MPU ON + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 106 + 180,
+			.target_residency = 309,
+			.name		  = "C2",
+			.desc		  = "MPU ON + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 107 + 410,
+			.target_residency = 46057,
+			.name		  = "C3",
+			.desc		  = "MPU RET + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 121 + 3374,
+			.target_residency = 46057,
+			.name		  = "C4",
+			.desc		  = "MPU OFF + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 855 + 1146,
+			.target_residency = 46057,
+			.name		  = "C5",
+			.desc		  = "MPU RET + CORE RET",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 7580 + 4134,
+			.target_residency = 484329,
+			.name		  = "C6",
+			.desc		  = "MPU OFF + CORE RET",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 7505 + 15274,
+			.target_residency = 484329,
+			.name		  = "C7",
+			.desc		  = "MPU OFF + CORE OFF",
+		},
+	},
+	.state_count = ARRAY_SIZE(omap3_idle_data),
+	.safe_state_index = 0,
+};
+
 /* Public functions */
 
 /**
@@ -340,5 +404,8 @@ int __init omap3_idle_init(void)
 	if (!mpu_pd || !core_pd || !per_pd || !cam_pd)
 		return -ENODEV;
 
-	return cpuidle_register(&omap3_idle_driver, NULL);
+	if (cpu_is_omap3430())
+		return cpuidle_register(&omap3430_idle_driver, NULL);
+	else
+		return cpuidle_register(&omap3_idle_driver, NULL);
 }
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414009 — [PATCH 3.10 074/143] ip6_tunnel: set rtnl_link_ops before calling register_netdevice

From: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>

commit b6ee376cb0b7fb4e7e07d6cd248bd40436fb9ba6 upstream.

When creating an ip6tnl tunnel with ip tunnel, rtnl_link_ops is not set
before ip6_tnl_create2 is called. When register_netdevice is called, there
is no linkinfo attribute in the NEWLINK message because of that.

Setting rtnl_link_ops before calling register_netdevice fixes that.

Fixes: 0b112457229d ("ip6tnl: add support of link creation via rtnl")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 net/ipv6/ip6_tunnel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index 14f46af..31bab1a 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -266,12 +266,12 @@ static int ip6_tnl_create2(struct net_device *dev)
 
 	t = netdev_priv(dev);
 
+	dev->rtnl_link_ops = &ip6_link_ops;
 	err = register_netdevice(dev);
 	if (err < 0)
 		goto out;
 
 	strcpy(t->parms.name, dev->name);
-	dev->rtnl_link_ops = &ip6_link_ops;
 
 	dev_hold(dev);
 	ip6_tnl_link(ip6n, t);
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414010 — [PATCH 3.10 008/143] EDAC, amd64_edac: Shift wrapping issue in f1x_get_norm_dct_addr()

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 6f3508f61c814ee852c199988a62bd954c50dfc1 upstream.

dct_sel_base_off is declared as a u64 but we're only using the lower 32
bits because of a shift wrapping bug. This can possibly truncate the
upper 16 bits of DctSelBaseOffset[47:26], causing us to misdecode the CS
row.

Fixes: c8e518d5673d ('amd64_edac: Sanitize f10_get_base_addr_offset')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20160120095451.GB19898@mwanda
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 drivers/edac/amd64_edac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 8b3d901..19353112 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1266,7 +1266,7 @@ static u64 f1x_get_norm_dct_addr(struct amd64_pvt *pvt, u8 range,
 	u64 chan_off;
 	u64 dram_base		= get_dram_base(pvt, range);
 	u64 hole_off		= f10_dhar_offset(pvt);
-	u64 dct_sel_base_off	= (pvt->dct_sel_hi & 0xFFFFFC00) << 16;
+	u64 dct_sel_base_off	= (u64)(pvt->dct_sel_hi & 0xFFFFFC00) << 16;
 
 	if (hi_rng) {
 		/*
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414011 — [PATCH 3.10 028/143] net: irda: Fix use-after-free in irtty_open()

From: Peter Hurley <peter@hurleysoftware.com>

commit 401879c57f01cbf2da204ad2e8db910525c6dbea upstream.

The N_IRDA line discipline may access the previous line discipline's closed
and already-fre private data on open [1].

The tty->disc_data field _never_ refers to valid data on entry to the
line discipline's open() method. Rather, the ldisc is expected to
initialize that field for its own use for the lifetime of the instance
(ie. from open() to close() only).

[1]
    ==================================================================
    BUG: KASAN: use-after-free in irtty_open+0x422/0x550 at addr ffff8800331dd068
    Read of size 4 by task a.out/13960
    =============================================================================
    BUG kmalloc-512 (Tainted: G    B          ): kasan: bad access detected
    -----------------------------------------------------------------------------
    ...
    Call Trace:
     [<ffffffff815fa2ae>] __asan_report_load4_noabort+0x3e/0x40 mm/kasan/report.c:279
     [<ffffffff836938a2>] irtty_open+0x422/0x550 drivers/net/irda/irtty-sir.c:436
     [<ffffffff829f1b80>] tty_ldisc_open.isra.2+0x60/0xa0 drivers/tty/tty_ldisc.c:447
     [<ffffffff829f21c0>] tty_set_ldisc+0x1a0/0x940 drivers/tty/tty_ldisc.c:567
     [<     inline     >] tiocsetd drivers/tty/tty_io.c:2650
     [<ffffffff829da49e>] tty_ioctl+0xace/0x1fd0 drivers/tty/tty_io.c:2883
     [<     inline     >] vfs_ioctl fs/ioctl.c:43
     [<ffffffff816708ac>] do_vfs_ioctl+0x57c/0xe60 fs/ioctl.c:607
     [<     inline     >] SYSC_ioctl fs/ioctl.c:622
     [<ffffffff81671204>] SyS_ioctl+0x74/0x80 fs/ioctl.c:613
     [<ffffffff852a7876>] entry_SYSCALL_64_fastpath+0x16/0x7a

Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 drivers/net/irda/irtty-sir.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index a412671..0d71fa9f 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -430,16 +430,6 @@ static int irtty_open(struct tty_struct *tty)
 
 	/* Module stuff handled via irda_ldisc.owner - Jean II */
 
-	/* First make sure we're not already connected. */
-	if (tty->disc_data != NULL) {
-		priv = tty->disc_data;
-		if (priv && priv->magic == IRTTY_MAGIC) {
-			ret = -EEXIST;
-			goto out;
-		}
-		tty->disc_data = NULL;		/* ### */
-	}
-
 	/* stop the underlying  driver */
 	irtty_stop_receiver(tty, TRUE);
 	if (tty->ops->stop)
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414012 — [PATCH 3.10 064/143] udp6: fix UDP/IPv6 encap resubmit path

From: Bill Sommerfeld <wsommerfeld@google.com>

commit 59dca1d8a6725a121dae6c452de0b2611d5865dc upstream.

IPv4 interprets a negative return value from a protocol handler as a
request to redispatch to a new protocol.  In contrast, IPv6 interprets a
negative value as an error, and interprets a positive value as a request
for redispatch.

UDP for IPv6 was unaware of this difference.  Change __udp6_lib_rcv() to
return a positive value for redispatch.  Note that the socket's
encap_rcv hook still needs to return a negative value to request
dispatch, and in the case of IPv6 packets, adjust IP6CB(skb)->nhoff to
identify the byte containing the next protocol.

Signed-off-by: Bill Sommerfeld <wsommerfeld@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 net/ipv6/udp.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 7e39018..3046d02 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -839,11 +839,9 @@ int __udp6_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
 		int ret = udpv6_queue_rcv_skb(sk, skb);
 		sock_put(sk);
 
-		/* a return value > 0 means to resubmit the input, but
-		 * it wants the return to be -protocol, or 0
-		 */
+		/* a return value > 0 means to resubmit the input */
 		if (ret > 0)
-			return -ret;
+			return ret;
 
 		return 0;
 	}
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414013 — [PATCH 3.10 073/143] ipv6: l2tp: fix a potential issue in l2tp_ip6_recv

From: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>

commit be447f305494e019dfc37ea4cdf3b0e4200b4eba upstream.

pskb_may_pull() can change skb->data, so we have to load ptr/optr at the
right place.

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 net/l2tp/l2tp_ip6.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c
index e6e8408..db96af9 100644
--- a/net/l2tp/l2tp_ip6.c
+++ b/net/l2tp/l2tp_ip6.c
@@ -135,12 +135,11 @@ static int l2tp_ip6_recv(struct sk_buff *skb)
 	struct l2tp_tunnel *tunnel = NULL;
 	int length;
 
-	/* Point to L2TP header */
-	optr = ptr = skb->data;
-
 	if (!pskb_may_pull(skb, 4))
 		goto discard;
 
+	/* Point to L2TP header */
+	optr = ptr = skb->data;
 	session_id = ntohl(*((__be32 *) ptr));
 	ptr += 4;
 
@@ -168,6 +167,9 @@ static int l2tp_ip6_recv(struct sk_buff *skb)
 		if (!pskb_may_pull(skb, length))
 			goto discard;
 
+		/* Point to L2TP header */
+		optr = ptr = skb->data;
+		ptr += 4;
 		pr_debug("%s: ip recv\n", tunnel->name);
 		print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, ptr, length);
 	}
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414014 — [PATCH 3.10 025/143] USB: option: add "D-Link DWM-221 B1" device id

From: Bjørn Mork <bjorn@mork.no>

commit d48d5691ebf88a15d95ba96486917ffc79256536 upstream.

Thomas reports:
"Windows:

00 diagnostics
01 modem
02 at-port
03 nmea
04 nic

Linux:

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2001 ProdID=7e19 Rev=02.32
S:  Manufacturer=Mobile Connect
S:  Product=Mobile Connect
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage"

Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 drivers/usb/serial/option.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 24366a2..99c89d7 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1818,6 +1818,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff),			/* D-Link DWM-221 B1 */
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) },                /* OLICARD300 - MT6225 */
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414015 — [PATCH 3.10 138/143] USB: serial: keyspan: fix use-after-free in probe error path

From: Johan Hovold <johan@kernel.org>

commit 35be1a71d70775e7bd7e45fa6d2897342ff4c9d2 upstream.

The interface instat and indat URBs were submitted in attach, but never
unlinked in release before deallocating the corresponding transfer
buffers.

In the case of a late probe error (e.g. due to failed minor allocation),
disconnect would not have been called before release, causing the
buffers to be freed while the URBs are still in use. We'd also end up
with active URBs for an unbound interface.

Fixes: f9c99bb8b3a1 ("USB: usb-serial: replace shutdown with disconnect,
release")
Cc: stable <stable@vger.kernel.org>	# v2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 drivers/usb/serial/keyspan.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index cec377b..32a67c6 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2392,6 +2392,10 @@ static void keyspan_release(struct usb_serial *serial)
 
 	s_priv = usb_get_serial_data(serial);
 
+	/* Make sure to unlink the URBs submitted in attach. */
+	usb_kill_urb(s_priv->instat_urb);
+	usb_kill_urb(s_priv->indat_urb);
+
 	usb_free_urb(s_priv->instat_urb);
 	usb_free_urb(s_priv->indat_urb);
 	usb_free_urb(s_priv->glocont_urb);
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414016 — [PATCH 3.10 027/143] Input: powermate - fix oops with malicious USB descriptors

From: Josh Boyer <jwboyer@fedoraproject.org>

commit 9c6ba456711687b794dcf285856fc14e2c76074f upstream.

The powermate driver expects at least one valid USB endpoint in its
probe function.  If given malicious descriptors that specify 0 for
the number of endpoints, it will crash.  Validate the number of
endpoints on the interface before using them.

The full report for this issue can be found here:
http://seclists.org/bugtraq/2016/Mar/85

Reported-by: Ralf Spenneberg <ralf@spenneberg.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 drivers/input/misc/powermate.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c
index 49c0c3e..21ce1cf 100644
--- a/drivers/input/misc/powermate.c
+++ b/drivers/input/misc/powermate.c
@@ -308,6 +308,9 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i
 	int error = -ENOMEM;
 
 	interface = intf->cur_altsetting;
+	if (interface->desc.bNumEndpoints < 1)
+		return -EINVAL;
+
 	endpoint = &interface->endpoint[0].desc;
 	if (!usb_endpoint_is_int_in(endpoint))
 		return -EIO;
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414017 — [PATCH 3.10 087/143] Input: gtco - fix crash on detecting device without endpoints

From: Vladis Dronov <vdronov@redhat.com>

commit 162f98dea487206d9ab79fc12ed64700667a894d upstream.

The gtco driver expects at least one valid endpoint. If given malicious
descriptors that specify 0 for the number of endpoints, it will crash in
the probe function. Ensure there is at least one endpoint on the interface
before using it.

Also let's fix a minor coding style issue.

The full correct report of this issue can be found in the public
Red Hat Bugzilla:

https://bugzilla.redhat.com/show_bug.cgi?id=1283385

Reported-by: Ralf Spenneberg <ralf@spenneberg.net>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 drivers/input/tablet/gtco.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index 29e01ab..a9f8f92 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -869,6 +869,14 @@ static int gtco_probe(struct usb_interface *usbinterface,
 		goto err_free_buf;
 	}
 
+	/* Sanity check that a device has an endpoint */
+	if (usbinterface->altsetting[0].desc.bNumEndpoints < 1) {
+		dev_err(&usbinterface->dev,
+			"Invalid number of endpoints\n");
+		error = -EINVAL;
+		goto err_free_urb;
+	}
+
 	/*
 	 * The endpoint is always altsetting 0, we know this since we know
 	 * this device only has one interrupt endpoint
@@ -890,7 +898,7 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	 * HID report descriptor
 	 */
 	if (usb_get_extra_descriptor(usbinterface->cur_altsetting,
-				     HID_DEVICE_TYPE, &hid_desc) != 0){
+				     HID_DEVICE_TYPE, &hid_desc) != 0) {
 		dev_err(&usbinterface->dev,
 			"Can't retrieve exta USB descriptor to get hid report descriptor length\n");
 		error = -EIO;
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414018 — [PATCH 3.10 080/143] [media] usbvision-video: fix memory leak of alt_max_pkt_size

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

commit 090c65b694c362adb19ec9c27de216a808ee443c upstream.

1. usbvision->alt_max_pkt_size is not deallocated anywhere.
2. if allocation of usbvision->alt_max_pkt_size fails,
there is no proper deallocation of already acquired resources.
The patch adds kfree(usbvision->alt_max_pkt_size) to
usbvision_release() as soon as other deallocations happen there.
It calls usbvision_release() if allocation of
usbvision->alt_max_pkt_size fails as soon as usbvision_release()
is safe to work with incompletely initialized usbvision structure.
Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 drivers/media/usb/usbvision/usbvision-video.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/usb/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c
index d34c2af..443e7833 100644
--- a/drivers/media/usb/usbvision/usbvision-video.c
+++ b/drivers/media/usb/usbvision/usbvision-video.c
@@ -1459,6 +1459,7 @@ static void usbvision_release(struct usb_usbvision *usbvision)
 
 	usbvision_remove_sysfs(usbvision->vdev);
 	usbvision_unregister_video(usbvision);
+	kfree(usbvision->alt_max_pkt_size);
 
 	usb_free_urb(usbvision->ctrl_urb);
 
@@ -1574,6 +1575,7 @@ static int usbvision_probe(struct usb_interface *intf,
 	usbvision->alt_max_pkt_size = kmalloc(32 * usbvision->num_alt, GFP_KERNEL);
 	if (usbvision->alt_max_pkt_size == NULL) {
 		dev_err(&intf->dev, "usbvision: out of memory!\n");
+		usbvision_release(usbvision);
 		return -ENOMEM;
 	}
 
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

#1414019 — [PATCH 3.10 122/143] decnet: Do not build routes to devices without decnet private data.

From: "David S. Miller" <davem@davemloft.net>

commit a36a0d4008488fa545c74445d69eaf56377d5d4e upstream.

In particular, make sure we check for decnet private presence
for loopback devices.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 net/decnet/dn_route.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c
index fe32388..b961005 100644
--- a/net/decnet/dn_route.c
+++ b/net/decnet/dn_route.c
@@ -1030,10 +1030,13 @@ source_ok:
 	if (!fld.daddr) {
 		fld.daddr = fld.saddr;
 
-		err = -EADDRNOTAVAIL;
 		if (dev_out)
 			dev_put(dev_out);
+		err = -EINVAL;
 		dev_out = init_net.loopback_dev;
+		if (!dev_out->dn_ptr)
+			goto out;
+		err = -EADDRNOTAVAIL;
 		dev_hold(dev_out);
 		if (!fld.daddr) {
 			fld.daddr =
@@ -1106,6 +1109,8 @@ source_ok:
 		if (dev_out == NULL)
 			goto out;
 		dn_db = rcu_dereference_raw(dev_out->dn_ptr);
+		if (!dn_db)
+			goto e_inval;
 		/* Possible improvement - check all devices for local addr */
 		if (dn_dev_islocal(dev_out, fld.daddr)) {
 			dev_put(dev_out);
@@ -1147,6 +1152,8 @@ select_source:
 			dev_put(dev_out);
 		dev_out = init_net.loopback_dev;
 		dev_hold(dev_out);
+		if (!dev_out->dn_ptr)
+			goto e_inval;
 		fld.flowidn_oif = dev_out->ifindex;
 		if (res.fi)
 			dn_fib_info_put(res.fi);
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [prev] | [next] | [standalone]

Page 2 of 7 — ← Prev page 1 [2] 3 4 5 6 7  Next page →

Back to top | Article view | linux.kernel

csiph-web