Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1411773 > unrolled thread

[PATCH 1/2] dt-bindings: Add jdi panel vendor

Back to article view | Back to linux.kernel

Contents

  [PATCH 1/2] dt-bindings: Add jdi panel vendor Vinay Simha BN <simhavcs@gmail.com> - 2016-06-02 04:40 +0200
    [PATCH 2/2] dt-bindings: Add jdi lt070me05000 panel bindings Vinay Simha BN <simhavcs@gmail.com> - 2016-06-02 04:40 +0200
      Re: [PATCH 2/2] dt-bindings: Add jdi lt070me05000 panel bindings Rob Herring <robh@kernel.org> - 2016-06-06 15:20 +0200
    Re: [PATCH 1/2] dt-bindings: Add jdi panel vendor Rob Herring <robh@kernel.org> - 2016-06-06 15:20 +0200

#1411773 — [PATCH 1/2] dt-bindings: Add jdi panel vendor

Japan Display Inc.

Cc: Archit Taneja <archit.taneja@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 3736acd..14ef665 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -137,6 +137,7 @@ invensense	InvenSense Inc.
 isee	ISEE 2007 S.L.
 isil	Intersil
 issi	Integrated Silicon Solutions Inc.
+jdi	Japan Display Inc.
 jedec	JEDEC Solid State Technology Association
 karo	Ka-Ro electronics GmbH
 keymile	Keymile GmbH
-- 
1.9.1

[toc] | [next] | [standalone]

#1411775 — [PATCH 2/2] dt-bindings: Add jdi lt070me05000 panel bindings

Add documentation for lt070me05000 panel

Cc: Archit Taneja <archit.taneja@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>

--
v2:
 * incorporated rob herring and thierry reviews
   gpio to gpios, gpio to regulator using fixed regulators
   and pwm backlight is removed, since it is controlled by
   dcs commands
---
 .../bindings/display/panel/jdi,lt070me05000.txt    | 58 ++++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt

diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
new file mode 100644
index 0000000..51068ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
@@ -0,0 +1,58 @@
+JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+Required properties:
+- compatible: should be "jdi,lt070me05000"
+- vddp-supply: phandle of the regulator that provides the supply voltage
+  Power IC supply (3-5V)
+- dcdc_en-supply: phandle of the regulator that provides the supply voltage
+  Power IC supply enable, High active
+- vcc-supply: phandle of the regulator that provides the supply voltage
+  IOVCC , power supply for LCM (1.8V)
+- reset-gpios: phandle of gpio for reset line
+  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
+  XRES, Reset, Low active
+- enable-gpios: phandle of gpio for enable line
+  LED_EN, LED backlight enable, High active
+
+Example:
+
+	vcc_1p8v: regulator-fixed@2 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcc_1p8v";
+		regulator-type = "voltage";
+		startup-delay-us = <0>;
+		gpio = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	tlmm_pinmux: pinctrl@800000 {
+
+		dsi_panel_pinctrl: dsi-panel-pinctrl {
+			mux {
+				pins = "gpio54";
+				function = "gpio";
+				bias-pull-up;
+				drive-strength = <8>;
+			};
+		};
+	};
+
+	dsi0: qcom,mdss_dsi@4700000 {
+		panel@0 {
+			compatible = "jdi,lt070me05000";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&dsi_panel_pinctrl>;
+
+			vddp-supply = <&pm8921_l17>;
+			dcdc_en-supply = <&pm8921_lvs7>;
+			vcc-supply = <&vcc_1p8v>;
+
+			reset-gpios = <&tlmm_pinmux 54 0>;
+			enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1415024 — Re: [PATCH 2/2] dt-bindings: Add jdi lt070me05000 panel bindings

On Thu, Jun 02, 2016 at 08:05:03AM +0530, Vinay Simha BN wrote:
> Add documentation for lt070me05000 panel
> 
> Cc: Archit Taneja <archit.taneja@gmail.com>
> Cc: John Stultz <john.stultz@linaro.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sumit Semwal <sumit.semwal@linaro.org>
> Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
> 
> --
> v2:
>  * incorporated rob herring and thierry reviews
>    gpio to gpios, gpio to regulator using fixed regulators
>    and pwm backlight is removed, since it is controlled by
>    dcs commands
> ---
>  .../bindings/display/panel/jdi,lt070me05000.txt    | 58 ++++++++++++++++++++++
>  1 file changed, 58 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt

Acked-by: Rob Herring <robh@kernel.org>

[toc] | [prev] | [next] | [standalone]

#1415026

On Thu, Jun 02, 2016 at 08:05:02AM +0530, Vinay Simha BN wrote:
> Japan Display Inc.
> 
> Cc: Archit Taneja <archit.taneja@gmail.com>
> Cc: John Stultz <john.stultz@linaro.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sumit Semwal <sumit.semwal@linaro.org>
> Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh@kernel.org>

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web