Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1410453 > unrolled thread

Re: [linux-sunxi] Re: [PATCH] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board

Started byMaxime Ripard <maxime.ripard@free-electrons.com>
First post2016-05-31 19:20 +0200
Last post2016-06-01 20:00 +0200
Articles 3 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [linux-sunxi] Re: [PATCH] ARM: dts: sun7i: Add dts file for  Bananapi M1 Plus board Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-05-31 19:20 +0200
    Re: [linux-sunxi] Re: [PATCH] ARM: dts: sun7i: Add dts file for  Bananapi M1 Plus board luoyi <luoyi.ly@gmail.com> - 2016-06-01 04:50 +0200
      Re: [linux-sunxi] Re: [PATCH] ARM: dts: sun7i: Add dts file for  Bananapi M1 Plus board Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-06-01 20:00 +0200

#1410453 — Re: [linux-sunxi] Re: [PATCH] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board

FromMaxime Ripard <maxime.ripard@free-electrons.com>
Date2016-05-31 19:20 +0200
SubjectRe: [linux-sunxi] Re: [PATCH] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board
Message-ID<rEVuG-5z8-9@gated-at.bofh.it>

[Multipart message — attachments visible in raw view] — view raw

On Mon, May 30, 2016 at 10:26:21PM +0200, Bernhard Nortmann wrote:
> Am 30.05.2016 um 21:43 schrieb Maxime Ripard:
> >Hi,
> >
> >On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi.ly@gmail.com wrote:
> >>From: luoyi <luoyi.ly@gmail.com>
> >>
> >>Add support for the Bananapi M1 Plus A20 development board from sinovoip.com.cn .
> >>This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for
> >>OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver,
> >>3.5 mm jack for stero sound out, on board microphone, 40 gpio pins and sdio wifi.
> >What is the difference between the M1+ and the M1?
> 
> The M1+ is an updated version of the original Banana Pi. If you're
> interested in the details, have a look at
> http://linux-sunxi.org/Banana_Pi#Variants .  "BPi-M1+" is SinoVoip's
> counterpart of LeMaker's "Banana Pro", for which a .dts already
> exists. Judging from .fex files, only a single pin assignment seems
> to differ between the two (audio_pa_ctrl, PH26 vs. PH15).

Gee, that's confusing :)

I guess we should just include the banana pro DTB and change that pin
(and the i2s pins Luo was mentionning).

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[toc] | [next] | [standalone]

#1410788

Fromluoyi <luoyi.ly@gmail.com>
Date2016-06-01 04:50 +0200
Message-ID<rF4oh-2uT-9@gated-at.bofh.it>
In reply to#1410453
This is the new version of the patch.  and I think maybe every board
should have their own dtb files. and we can you some cpp  macro tricks
to merge their coressponding dts file.

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e06a5ab..fde407f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -685,6 +685,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
     sun6i-a31s-yones-toptech-bs1078-v2.dtb
 dtb-$(CONFIG_MACH_SUN7I) += \
     sun7i-a20-bananapi.dtb \
+    sun7i-a20-bananapi-m1-plus.dtb \
     sun7i-a20-bananapro.dtb \
     sun7i-a20-cubieboard2.dtb \
     sun7i-a20-cubietruck.dtb \
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
new file mode 100644
index 0000000..548ed31
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -0,0 +1,266 @@
+/*
+ * Copyright 2016 Luo Yi <luoyi.ly@gmail.com>
+ *
+ * Thanks to the original work by Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+    model = "Banana Pi BPI-M1-Plus";
+    compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20";
+
+    aliases {
+        serial0 = &uart0;
+    };
+
+    chosen {
+        stdout-path = "serial0:115200n8";
+    };
+
+    leds {
+        compatible = "gpio-leds";
+        pinctrl-names = "default";
+        pinctrl-0 = <&led_pins_bananapi>;
+
+        green {
+            label = "bananapi:green:usr";
+            gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+        };
+
+        red {
+            label = "bananapi:red:usr";
+            gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
+            linux,default-trigger = "default-on";
+        };
+
+    };
+
+    mmc3_pwrseq: mmc3_pwrseq {
+        compatible = "mmc-pwrseq-simple";
+        pinctrl-names = "default";
+        pinctrl-0 = <&mmc3_pwrseq_pin_bananapim1plus>;
+        reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
+    };
+
+    reg_gmac_3v3: gmac-3v3 {
+        compatible = "regulator-fixed";
+        pinctrl-names = "default";
+        pinctrl-0 = <&gmac_power_pin_bananapi>;
+        regulator-name = "gmac-3v3";
+        regulator-min-microvolt = <3300000>;
+        regulator-max-microvolt = <3300000>;
+        startup-delay-us = <100000>;
+        enable-active-high;
+        gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+    };
+
+};
+
+&ahci {
+    status = "okay";
+};
+
+&codec {
+    status = "okay";
+};
+
+&ehci0 {
+    status = "okay";
+};
+
+&ehci1 {
+    status = "okay";
+};
+
+&gmac {
+    pinctrl-names = "default";
+    pinctrl-0 = <&gmac_pins_rgmii_a>;
+    phy = <&phy1>;
+    phy-mode = "rgmii";
+    phy-supply = <&reg_gmac_3v3>;
+    status = "okay";
+
+    phy1: ethernet-phy@1 {
+        reg = <1>;
+    };
+};
+
+&i2c0 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&i2c0_pins_a>;
+    status = "okay";
+
+    axp209: pmic@34 {
+        compatible = "x-powers,axp209";
+        reg = <0x34>;
+        interrupt-parent = <&nmi_intc>;
+        interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
+};
+
+&ir0 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&ir0_rx_pins_a>;
+    status = "okay";
+};
+
+&mmc0 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
+    vmmc-supply = <&reg_vcc3v3>;
+    bus-width = <4>;
+    cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+    cd-inverted;
+    status = "okay";
+};
+
+&mmc3 {
+
+    #address-cells = <1>;
+    #size-cells = <0>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&mmc3_pins_a>;
+    vmmc-supply = <&reg_vcc3v3>;
+    mmc-pwrseq = <&mmc3_pwrseq>;
+    bus-width = <4>;
+    non-removable;
+    enable-sdio-wakeup;
+    status = "okay";
+
+    brcmf: bcrmf@1 {
+        reg = <1>;
+        compatible = "brcm,bcm4329-fmac";
+        interrupt-parent = <&pio>;
+        interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "host-wake";
+    };
+
+};
+
+&mmc3_pins_a {
+    /* AP6210 requires pull-up */
+    allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+    status = "okay";
+};
+
+&ohci1 {
+    status = "okay";
+};
+
+&pio {
+    gmac_power_pin_bananapi: gmac_power_pin@0 {
+        allwinner,pins = "PH23";
+        allwinner,function = "gpio_out";
+        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+        allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+    };
+
+    led_pins_bananapi: led_pins@0 {
+        allwinner,pins = "PH24", "PG2";
+        allwinner,function = "gpio_out";
+        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+        allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+    };
+
+    mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
+        allwinner,pins = "PH10";
+        allwinner,function = "gpio_in";
+        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+        allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+    };
+
+    mmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin@0 {
+        allwinner,pins = "PH22";
+        allwinner,function = "gpio_out";
+        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+        allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+    };
+
+    usb1_vbus_pin_bananapi: usb1_vbus_pin@0 {
+        allwinner,pins = "PH0";
+        allwinner,function = "gpio_out";
+        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+        allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+    };
+
+    usb2_vbus_pin_bananapi: usb2_vbus_pin@0 {
+        allwinner,pins = "PH1";
+        allwinner,function = "gpio_out";
+        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+        allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+    };
+
+};
+
+&reg_usb1_vbus {
+    pinctrl-0 = <&usb1_vbus_pin_bananapi>;
+    gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
+    status = "okay";
+};
+
+&reg_usb2_vbus {
+    pinctrl-0 = <&usb2_vbus_pin_bananapi>;
+    gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+    status = "okay";
+};
+
+&uart0 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart0_pins_a>;
+    status = "okay";
+};
+
+&usbphy {
+    usb1_vbus-supply = <&reg_usb1_vbus>;
+    usb2_vbus-supply = <&reg_usb2_vbus>;
+    status = "okay";
+};

2016-06-01 1:09 GMT+08:00 Maxime Ripard <maxime.ripard@free-electrons.com>:
> On Mon, May 30, 2016 at 10:26:21PM +0200, Bernhard Nortmann wrote:
>> Am 30.05.2016 um 21:43 schrieb Maxime Ripard:
>> >Hi,
>> >
>> >On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi.ly@gmail.com wrote:
>> >>From: luoyi <luoyi.ly@gmail.com>
>> >>
>> >>Add support for the Bananapi M1 Plus A20 development board from sinovoip.com.cn .
>> >>This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for
>> >>OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver,
>> >>3.5 mm jack for stero sound out, on board microphone, 40 gpio pins and sdio wifi.
>> >What is the difference between the M1+ and the M1?
>>
>> The M1+ is an updated version of the original Banana Pi. If you're
>> interested in the details, have a look at
>> http://linux-sunxi.org/Banana_Pi#Variants .  "BPi-M1+" is SinoVoip's
>> counterpart of LeMaker's "Banana Pro", for which a .dts already
>> exists. Judging from .fex files, only a single pin assignment seems
>> to differ between the two (audio_pa_ctrl, PH26 vs. PH15).
>
> Gee, that's confusing :)
>
> I guess we should just include the banana pro DTB and change that pin
> (and the i2s pins Luo was mentionning).
>
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com

[toc] | [prev] | [next] | [standalone]

#1411434

FromMaxime Ripard <maxime.ripard@free-electrons.com>
Date2016-06-01 20:00 +0200
Message-ID<rFiAV-3aE-15@gated-at.bofh.it>
In reply to#1410788

[Multipart message — attachments visible in raw view] — view raw

Hi,

On Wed, Jun 01, 2016 at 10:40:18AM +0800, luoyi wrote:
> This is the new version of the patch.  and I think maybe every board
> should have their own dtb files. and we can you some cpp  macro tricks
> to merge their coressponding dts file.

Please submit it as a new patch with send-email, with the version
(using the -v option) and a log of your changes.

> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index e06a5ab..fde407f 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -685,6 +685,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
>      sun6i-a31s-yones-toptech-bs1078-v2.dtb
>  dtb-$(CONFIG_MACH_SUN7I) += \
>      sun7i-a20-bananapi.dtb \
> +    sun7i-a20-bananapi-m1-plus.dtb \
>      sun7i-a20-bananapro.dtb \
>      sun7i-a20-cubieboard2.dtb \
>      sun7i-a20-cubietruck.dtb \
> diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
> b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
> new file mode 100644
> index 0000000..548ed31
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
> @@ -0,0 +1,266 @@
> +/*
> + * Copyright 2016 Luo Yi <luoyi.ly@gmail.com>
> + *
> + * Thanks to the original work by Hans de Goede <hdegoede@redhat.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "sun7i-a20.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +    model = "Banana Pi BPI-M1-Plus";
> +    compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20";
> +
> +    aliases {
> +        serial0 = &uart0;
> +    };
> +
> +    chosen {
> +        stdout-path = "serial0:115200n8";
> +    };
> +
> +    leds {
> +        compatible = "gpio-leds";
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&led_pins_bananapi>;
> +
> +        green {
> +            label = "bananapi:green:usr";
> +            gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
> +        };
> +
> +        red {
> +            label = "bananapi:red:usr";
> +            gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
> +            linux,default-trigger = "default-on";
> +        };
> +
> +    };
> +
> +    mmc3_pwrseq: mmc3_pwrseq {
> +        compatible = "mmc-pwrseq-simple";
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&mmc3_pwrseq_pin_bananapim1plus>;
> +        reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
> +    };
> +
> +    reg_gmac_3v3: gmac-3v3 {
> +        compatible = "regulator-fixed";
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&gmac_power_pin_bananapi>;
> +        regulator-name = "gmac-3v3";
> +        regulator-min-microvolt = <3300000>;
> +        regulator-max-microvolt = <3300000>;
> +        startup-delay-us = <100000>;
> +        enable-active-high;
> +        gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
> +    };
> +
> +};
> +
> +&ahci {
> +    status = "okay";
> +};
> +
> +&codec {
> +    status = "okay";
> +};
> +
> +&ehci0 {
> +    status = "okay";
> +};
> +
> +&ehci1 {
> +    status = "okay";
> +};
> +
> +&gmac {
> +    pinctrl-names = "default";
> +    pinctrl-0 = <&gmac_pins_rgmii_a>;
> +    phy = <&phy1>;
> +    phy-mode = "rgmii";
> +    phy-supply = <&reg_gmac_3v3>;
> +    status = "okay";
> +
> +    phy1: ethernet-phy@1 {
> +        reg = <1>;
> +    };
> +};
> +
> +&i2c0 {
> +    pinctrl-names = "default";
> +    pinctrl-0 = <&i2c0_pins_a>;
> +    status = "okay";
> +
> +    axp209: pmic@34 {
> +        compatible = "x-powers,axp209";
> +        reg = <0x34>;
> +        interrupt-parent = <&nmi_intc>;
> +        interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> +
> +        interrupt-controller;
> +        #interrupt-cells = <1>;
> +    };
> +};
> +
> +&ir0 {
> +    pinctrl-names = "default";
> +    pinctrl-0 = <&ir0_rx_pins_a>;
> +    status = "okay";
> +};
> +
> +&mmc0 {
> +    pinctrl-names = "default";
> +    pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
> +    vmmc-supply = <&reg_vcc3v3>;
> +    bus-width = <4>;
> +    cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
> +    cd-inverted;
> +    status = "okay";
> +};
> +
> +&mmc3 {
> +
> +    #address-cells = <1>;
> +    #size-cells = <0>;
> +    pinctrl-names = "default";
> +    pinctrl-0 = <&mmc3_pins_a>;
> +    vmmc-supply = <&reg_vcc3v3>;
> +    mmc-pwrseq = <&mmc3_pwrseq>;
> +    bus-width = <4>;
> +    non-removable;
> +    enable-sdio-wakeup;
> +    status = "okay";
> +
> +    brcmf: bcrmf@1 {
> +        reg = <1>;
> +        compatible = "brcm,bcm4329-fmac";
> +        interrupt-parent = <&pio>;
> +        interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
> +        interrupt-names = "host-wake";
> +    };
> +
> +};
> +
> +&mmc3_pins_a {
> +    /* AP6210 requires pull-up */
> +    allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
> +};
> +
> +&ohci0 {
> +    status = "okay";
> +};
> +
> +&ohci1 {
> +    status = "okay";
> +};
> +
> +&pio {
> +    gmac_power_pin_bananapi: gmac_power_pin@0 {
> +        allwinner,pins = "PH23";
> +        allwinner,function = "gpio_out";
> +        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +        allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +    };
> +
> +    led_pins_bananapi: led_pins@0 {
> +        allwinner,pins = "PH24", "PG2";
> +        allwinner,function = "gpio_out";
> +        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +        allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +    };
> +
> +    mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
> +        allwinner,pins = "PH10";
> +        allwinner,function = "gpio_in";
> +        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +        allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
> +    };
> +
> +    mmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin@0 {
> +        allwinner,pins = "PH22";
> +        allwinner,function = "gpio_out";
> +        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +        allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +    };
> +
> +    usb1_vbus_pin_bananapi: usb1_vbus_pin@0 {
> +        allwinner,pins = "PH0";
> +        allwinner,function = "gpio_out";
> +        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +        allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +    };
> +
> +    usb2_vbus_pin_bananapi: usb2_vbus_pin@0 {
> +        allwinner,pins = "PH1";
> +        allwinner,function = "gpio_out";
> +        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +        allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +    };
> +
> +};
> +
> +&reg_usb1_vbus {
> +    pinctrl-0 = <&usb1_vbus_pin_bananapi>;
> +    gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
> +    status = "okay";
> +};
> +
> +&reg_usb2_vbus {
> +    pinctrl-0 = <&usb2_vbus_pin_bananapi>;
> +    gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
> +    status = "okay";
> +};
> +
> +&uart0 {
> +    pinctrl-names = "default";
> +    pinctrl-0 = <&uart0_pins_a>;
> +    status = "okay";
> +};
> +
> +&usbphy {
> +    usb1_vbus-supply = <&reg_usb1_vbus>;
> +    usb2_vbus-supply = <&reg_usb2_vbus>;
> +    status = "okay";
> +};

Please include the bananapro dts to not duplicate all the common parts.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web