Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1412613 > unrolled thread
| Started by | Rob Herring <robh@kernel.org> |
|---|---|
| First post | 2016-06-03 01:30 +0200 |
| Last post | 2016-06-03 01:30 +0200 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH v2 2/2] ARM: at91: Add DT support for Olimex SAM9-L9260 board. Rob Herring <robh@kernel.org> - 2016-06-03 01:30 +0200
| From | Rob Herring <robh@kernel.org> |
|---|---|
| Date | 2016-06-03 01:30 +0200 |
| Subject | Re: [PATCH v2 2/2] ARM: at91: Add DT support for Olimex SAM9-L9260 board. |
| Message-ID | <rFKdP-3XJ-5@gated-at.bofh.it> |
On Tue, May 31, 2016 at 12:47:31PM +0530, Raashid Muhammed wrote:
> From: Raashid Muhammed <raashidmuhammed@zilogic.com>
>
> sam9-l9260 is a low cost board designed by Olimex.
>
> More information is available at:
> https://www.olimex.com/Products/ARM/Atmel/SAM9-L9260/
>
> Signed-off-by: Raashid Muhammed <raashidmuhammed@zilogic.com>
> Reviewed-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
> ---
> Documentation/devicetree/bindings/arm/olimex.txt | 8 +-
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/at91-sam9_l9260.dts | 115 +++++++++++++++++++++++
> 3 files changed, 122 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/boot/dts/at91-sam9_l9260.dts
One nit, otherwise:
Acked-by: Rob Herring <robh@kernel.org>
> + spi0: spi@fffc8000 {
> + cs-gpios = <&pioC 11 0>, <0>, <0>, <0>;
> + status = "okay";
> +
> + mtd_dataflash@0 {
flash@0
> + compatible = "atmel,at45", "atmel,dataflash";
> + spi-max-frequency = <15000000>;
> + reg = <0>;
> + };
> + };
Back to top | Article view | linux.kernel
csiph-web