Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1408959 > unrolled thread

[PATCH 0/2 v8] Add I2S audio support for ARC AXS10x boards

Back to article view | Back to linux.kernel

Contents

  [PATCH 0/2 v8] Add I2S audio support for ARC AXS10x boards Jose Abreu <Jose.Abreu@synopsys.com> - 2016-05-30 12:00 +0200
    [PATCH 2/2 v8] ASoC: dwc: Add irq parameter to DOCUMENTATION Jose Abreu <Jose.Abreu@synopsys.com> - 2016-05-30 12:00 +0200

#1408959 — [PATCH 0/2 v8] Add I2S audio support for ARC AXS10x boards

ARC AXS10x platforms consist of a mainboard with several peripherals.
One of those peripherals is an HDMI output port controlled by the ADV7511
transmitter.

This patch set adds I2S audio for the AXS10x platform.

NOTE:
Although the mainline I2S driver uses ALSA DMA engine, this controller
can be built without DMA support so it was necessary to add this
custom platform driver so that HDMI audio works in AXS boards.

Changes v7 -> v8:
* Build PIO PCM as module
* Always unmask interrupts even when in DMA mode
* Fallback to PIO mode only if ALSA DMA engine probe fails

Changes v6 -> v7:
* Discard the use of memcpy
* Report IRQ_HANDLED only when there is an IRQ
* Use interrupts to check if PIO mode is in use
* Unmask interrupts only when in PIO mode
* Remove empty functions

Changes v5 -> v6:
* Use SNDRV_DMA_TYPE_CONTINUOUS

Changes v4 -> v5:
* Resolve undefined references when compiling as module
* Dropped adv7511 audio patches
* Use DMA properties in I2S to check which mode to use: PIO or DMA (as suggested by Lars-Peter Clausen)

Changes v3 -> v4:
* Reintroduced custom PCM driver (see note below)
* Use DT boolean to switch between ALSA DMA engine PCM or custom PCM
* Use fifo depth to program I2S FCR
* Update I2S documentation

Changes v2 -> v3:
* Removed pll_config functions (as suggested by Alexey Brodkin)
* Removed HDMI start at adv7511_core (as suggested by Archit Taneja)
* Use NOP functions for adv7511_audio (as suggested by Archit Taneja)
* Added adv7511_audio_exit() function (as suggested by Archit Taneja)
* Moved adv7511 to its own folder (as suggested by Archit Taneja)
* Separated file rename of adv7511_core (as suggested by Emil Velikov)
* Compile adv7511 as module if ALSA SoC is compiled as module
* Load adv7511 audio only if declared in device tree (as suggested by Laurent Pinchart)
* Dropped custom platform driver, using now ALSA DMA engine
* Dropped IRQ handler for I2S

Changes v1 -> v2:
* DT bindings moved to separate patch (as suggested by Alexey Brodkin)
* Removed defconfigs entries (as suggested by Alexey Brodkin)


Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org

Jose Abreu (2):
  ASoC: dwc: Add PIO PCM extension
  ASoC: dwc: Add irq parameter to DOCUMENTATION

 .../devicetree/bindings/sound/designware-i2s.txt   |   4 +
 sound/soc/dwc/Kconfig                              |   9 +
 sound/soc/dwc/Makefile                             |   1 +
 sound/soc/dwc/designware_i2s.c                     | 152 ++++++--------
 sound/soc/dwc/designware_pcm.c                     | 222 +++++++++++++++++++++
 sound/soc/dwc/local.h                              | 122 +++++++++++
 6 files changed, 422 insertions(+), 88 deletions(-)
 create mode 100644 sound/soc/dwc/designware_pcm.c
 create mode 100644 sound/soc/dwc/local.h

-- 
1.9.1

[toc] | [next] | [standalone]

#1408960 — [PATCH 2/2 v8] ASoC: dwc: Add irq parameter to DOCUMENTATION

A parameter description for the interruptions of the
I2S controller was added.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
---

No changes v7 -> v8.

Changes v6 -> v7:
* interrupts is now optional property

No changes v5 -> v6.

Changes v4 -> v5:
* interrupts is now required property
* Drop 'snps-use-dmaengine' property

This patch was only introduced in v4.

 Documentation/devicetree/bindings/sound/designware-i2s.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt
index 7bb5424..6a536d5 100644
--- a/Documentation/devicetree/bindings/sound/designware-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/designware-i2s.txt
@@ -12,6 +12,10 @@ Required properties:
    one for receive.
  - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
 
+Optional properties:
+ - interrupts: The interrupt line number for the I2S controller. Add this
+   parameter if the I2S controller that you are using does not support DMA.
+
 For more details on the 'dma', 'dma-names', 'clock' and 'clock-names'
 properties please check:
 	* resource-names.txt
-- 
1.9.1

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web