Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1405162 > unrolled thread

[PATCH] powerpc/pseries: start rtasd before PCI probing

Back to article view | Back to linux.kernel

Contents

  [PATCH] powerpc/pseries: start rtasd before PCI probing Greg Kurz <gkurz@linux.vnet.ibm.com> - 2016-05-23 10:30 +0200
    Re: powerpc/pseries: start rtasd before PCI probing Thomas Huth <thuth@redhat.com> - 2016-05-23 20:30 +0200
      Re: powerpc/pseries: start rtasd before PCI probing Greg Kurz <gkurz@linux.vnet.ibm.com> - 2016-05-23 20:40 +0200
    Re: [Qemu-ppc] [PATCH] powerpc/pseries: start rtasd before PCI  probing Greg Kurz <gkurz@linux.vnet.ibm.com> - 2016-05-30 09:40 +0200

#1405162 — [PATCH] powerpc/pseries: start rtasd before PCI probing

A strange behaviour is observed when comparing PCI hotplug in QEMU, between
x86 and pseries. If you consider the following steps:
- start a VM
- add a PCI device via the QEMU monitor before the rtasd has started (for
  example starting the VM in paused state, or hotplug during FW or boot
  loader)
- resume the VM execution

The x86 kernel detects the PCI device, but the pseries one does not.

This happens because the rtasd kernel worker is currently started under
device_initcall, while PCI probing happens earlier under subsys_initcall.

As a consequence, if we have a pending RTAS event at boot time, a message
is printed and the event is dropped.

This patch moves all the initialization of rtasd to arch_initcall, which is
run before subsys_call: this way, logging_enabled is true when the RTAS
event pops up and it is not lost anymore.

The proc fs bits stay at device_initcall because they cannot be run before
fs_initcall.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
---
 arch/powerpc/kernel/rtasd.c |   19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c
index e864b7c5884e..ad9e4e1a2d5d 100644
--- a/arch/powerpc/kernel/rtasd.c
+++ b/arch/powerpc/kernel/rtasd.c
@@ -526,10 +526,8 @@ void rtas_cancel_event_scan(void)
 }
 EXPORT_SYMBOL_GPL(rtas_cancel_event_scan);
 
-static int __init rtas_init(void)
+static int __init rtas_event_scan_init(void)
 {
-	struct proc_dir_entry *entry;
-
 	if (!machine_is(pseries) && !machine_is(chrp))
 		return 0;
 
@@ -562,13 +560,24 @@ static int __init rtas_init(void)
 		return -ENOMEM;
 	}
 
+	start_event_scan();
+
+	return 0;
+}
+arch_initcall(rtas_event_scan_init);
+
+static int __init rtas_init(void)
+{
+	struct proc_dir_entry *entry;
+
+	if (!machine_is(pseries) && !machine_is(chrp))
+		return 0;
+
 	entry = proc_create("powerpc/rtas/error_log", S_IRUSR, NULL,
 			    &proc_rtas_log_operations);
 	if (!entry)
 		printk(KERN_ERR "Failed to create error_log proc entry\n");
 
-	start_event_scan();
-
 	return 0;
 }
 __initcall(rtas_init);

[toc] | [next] | [standalone]

#1405559 — Re: powerpc/pseries: start rtasd before PCI probing

On 23.05.2016 10:28, Greg Kurz wrote:
> A strange behaviour is observed when comparing PCI hotplug in QEMU, between
> x86 and pseries. If you consider the following steps:
> - start a VM
> - add a PCI device via the QEMU monitor before the rtasd has started (for
>   example starting the VM in paused state, or hotplug during FW or boot
>   loader)
> - resume the VM execution
> 
> The x86 kernel detects the PCI device, but the pseries one does not.
> 
> This happens because the rtasd kernel worker is currently started under
> device_initcall, while PCI probing happens earlier under subsys_initcall.
> 
> As a consequence, if we have a pending RTAS event at boot time, a message
> is printed and the event is dropped.
> 
> This patch moves all the initialization of rtasd to arch_initcall, which is
> run before subsys_call: this way, logging_enabled is true when the RTAS
> event pops up and it is not lost anymore.
> 
> The proc fs bits stay at device_initcall because they cannot be run before
> fs_initcall.
> 
> Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
> ---
>  arch/powerpc/kernel/rtasd.c |   19 ++++++++++++++-----
>  1 file changed, 14 insertions(+), 5 deletions(-)

By the way, same is true for device UNplugging: When unplugging devices
in QEMU while the firmware is still running, they are never properly
removed from the guest. I've checked it, and your patch fixes this
problem as well! Great :-)

Tested-by: Thomas Huth <thuth@redhat.com>

[toc] | [prev] | [next] | [standalone]

#1405565 — Re: powerpc/pseries: start rtasd before PCI probing

On Mon, 23 May 2016 20:23:19 +0200
Thomas Huth <thuth@redhat.com> wrote:

> On 23.05.2016 10:28, Greg Kurz wrote:
> > A strange behaviour is observed when comparing PCI hotplug in QEMU, between
> > x86 and pseries. If you consider the following steps:
> > - start a VM
> > - add a PCI device via the QEMU monitor before the rtasd has started (for
> >   example starting the VM in paused state, or hotplug during FW or boot
> >   loader)
> > - resume the VM execution
> > 
> > The x86 kernel detects the PCI device, but the pseries one does not.
> > 
> > This happens because the rtasd kernel worker is currently started under
> > device_initcall, while PCI probing happens earlier under subsys_initcall.
> > 
> > As a consequence, if we have a pending RTAS event at boot time, a message
> > is printed and the event is dropped.
> > 
> > This patch moves all the initialization of rtasd to arch_initcall, which is
> > run before subsys_call: this way, logging_enabled is true when the RTAS
> > event pops up and it is not lost anymore.
> > 
> > The proc fs bits stay at device_initcall because they cannot be run before
> > fs_initcall.
> > 
> > Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
> > ---
> >  arch/powerpc/kernel/rtasd.c |   19 ++++++++++++++-----
> >  1 file changed, 14 insertions(+), 5 deletions(-)  
> 
> By the way, same is true for device UNplugging: When unplugging devices
> in QEMU while the firmware is still running, they are never properly
> removed from the guest. I've checked it, and your patch fixes this
> problem as well! Great :-)
> 
> Tested-by: Thomas Huth <thuth@redhat.com>
> 

Indeed, all pending RTAS events were lost... now rtasd will log them, up
to 64 events, but I did not test that far :)

Thanks for testing !

Cheers.

--
Greg

[toc] | [prev] | [next] | [standalone]

#1408823 — Re: [Qemu-ppc] [PATCH] powerpc/pseries: start rtasd before PCI probing

On Mon, 23 May 2016 10:28:28 +0200
Greg Kurz <gkurz@linux.vnet.ibm.com> wrote:

> A strange behaviour is observed when comparing PCI hotplug in QEMU, between
> x86 and pseries. If you consider the following steps:
> - start a VM
> - add a PCI device via the QEMU monitor before the rtasd has started (for
>   example starting the VM in paused state, or hotplug during FW or boot
>   loader)
> - resume the VM execution
> 
> The x86 kernel detects the PCI device, but the pseries one does not.
> 
> This happens because the rtasd kernel worker is currently started under
> device_initcall, while PCI probing happens earlier under subsys_initcall.
> 
> As a consequence, if we have a pending RTAS event at boot time, a message
> is printed and the event is dropped.
> 
> This patch moves all the initialization of rtasd to arch_initcall, which is
> run before subsys_call: this way, logging_enabled is true when the RTAS
> event pops up and it is not lost anymore.
> 
> The proc fs bits stay at device_initcall because they cannot be run before
> fs_initcall.
> 
> Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
> ---

Ping ?

>  arch/powerpc/kernel/rtasd.c |   19 ++++++++++++++-----
>  1 file changed, 14 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c
> index e864b7c5884e..ad9e4e1a2d5d 100644
> --- a/arch/powerpc/kernel/rtasd.c
> +++ b/arch/powerpc/kernel/rtasd.c
> @@ -526,10 +526,8 @@ void rtas_cancel_event_scan(void)
>  }
>  EXPORT_SYMBOL_GPL(rtas_cancel_event_scan);
> 
> -static int __init rtas_init(void)
> +static int __init rtas_event_scan_init(void)
>  {
> -	struct proc_dir_entry *entry;
> -
>  	if (!machine_is(pseries) && !machine_is(chrp))
>  		return 0;
> 
> @@ -562,13 +560,24 @@ static int __init rtas_init(void)
>  		return -ENOMEM;
>  	}
> 
> +	start_event_scan();
> +
> +	return 0;
> +}
> +arch_initcall(rtas_event_scan_init);
> +
> +static int __init rtas_init(void)
> +{
> +	struct proc_dir_entry *entry;
> +
> +	if (!machine_is(pseries) && !machine_is(chrp))
> +		return 0;
> +
>  	entry = proc_create("powerpc/rtas/error_log", S_IRUSR, NULL,
>  			    &proc_rtas_log_operations);
>  	if (!entry)
>  		printk(KERN_ERR "Failed to create error_log proc entry\n");
> 
> -	start_event_scan();
> -
>  	return 0;
>  }
>  __initcall(rtas_init);
> 
> 

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web