Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1409377 > unrolled thread

[PATCH 3.14 00/20] 3.14.71-stable review

Back to article view | Back to linux.kernel

Contents

  [PATCH 3.14 00/20] 3.14.71-stable review Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-30 23:00 +0200
    [PATCH 3.14 09/20] mmc: mmc: Fix partition switch timeout for some eMMCs Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:00 +0200
    [PATCH 3.14 13/20] USB: serial: mxuport: fix use-after-free in probe error path Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:10 +0200
    [PATCH 3.14 18/20] USB: serial: option: add support for Cinterion PH8 and AHxx Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:10 +0200
    [PATCH 3.14 08/20] mfd: omap-usb-tll: Fix scheduling while atomic BUG Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:10 +0200
    [PATCH 3.14 06/20] ring-buffer: Prevent overflow of size in ring_buffer_resize() Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:10 +0200
    [PATCH 3.14 15/20] USB: serial: quatech2: fix use-after-free in probe error path Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:10 +0200
    [PATCH 3.14 11/20] mmc: longer timeout for long read time quirk Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:10 +0200
    [PATCH 3.14 10/20] ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal strings Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:10 +0200
    [PATCH 3.14 14/20] USB: serial: keyspan: fix use-after-free in probe error path Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:10 +0200
    [PATCH 3.14 07/20] crypto: caam - fix caam_jr_alloc() ret code Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:10 +0200
    [PATCH 3.14 17/20] USB: serial: io_edgeport: fix memory leaks in probe error path Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:10 +0200
    [PATCH 3.14 03/20] remove directory incorrectly tries to set delete on close on non-empty directories Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:20 +0200
    [PATCH 3.14 04/20] fs/cifs: correctly to anonymous authentication via NTLMSSP Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:20 +0200
    [PATCH 3.14 20/20] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios() Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:20 +0200
    [PATCH 3.14 02/20] arm/arm64: KVM: Enforce Break-Before-Make on Stage-2 page tables Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:20 +0200
    [PATCH 3.14 19/20] tty: vt, return error when con_startup fails Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:20 +0200
    [PATCH 3.14 12/20] Bluetooth: vhci: purge unhandled skbs Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:20 +0200
    [PATCH 3.14 05/20] ring-buffer: Use long for nr_pages to avoid overflow failures Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:20 +0200
    [PATCH 3.14 01/20] Btrfs: dont use src fd for printk Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-31 00:20 +0200
    Re: [PATCH 3.14 00/20] 3.14.71-stable review Guenter Roeck <linux@roeck-us.net> - 2016-06-01 07:30 +0200
    Re: [PATCH 3.14 00/20] 3.14.71-stable review Shuah Khan <shuahkh@osg.samsung.com> - 2016-06-01 16:30 +0200
      Re: [PATCH 3.14 00/20] 3.14.71-stable review Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-06-01 18:20 +0200
    Re: [PATCH 3.14 00/20] 3.14.71-stable review Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-06-01 18:20 +0200
      Re: [PATCH 3.14 00/20] 3.14.71-stable review Kevin Hilman <khilman@baylibre.com> - 2016-06-01 19:40 +0200

Page 1 of 2  [1] 2  Next page →

#1409377 — [PATCH 3.14 00/20] 3.14.71-stable review

This is the start of the stable review cycle for the 3.14.71 release.
There are 20 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed Jun  1 20:49:23 UTC 2016.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.14.71-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.14.71-rc1

Chanwoo Choi <cw00.choi@samsung.com>
    serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()

Jiri Slaby <jslaby@suse.cz>
    tty: vt, return error when con_startup fails

Schemmel Hans-Christoph <Hans-Christoph.Schemmel@gemalto.com>
    USB: serial: option: add support for Cinterion PH8 and AHxx

Johan Hovold <johan@kernel.org>
    USB: serial: io_edgeport: fix memory leaks in probe error path

Johan Hovold <johan@kernel.org>
    USB: serial: io_edgeport: fix memory leaks in attach error path

Johan Hovold <johan@kernel.org>
    USB: serial: quatech2: fix use-after-free in probe error path

Johan Hovold <johan@kernel.org>
    USB: serial: keyspan: fix use-after-free in probe error path

Johan Hovold <johan@kernel.org>
    USB: serial: mxuport: fix use-after-free in probe error path

Jiri Slaby <jslaby@suse.cz>
    Bluetooth: vhci: purge unhandled skbs

Matt Gumbel <matthew.k.gumbel@intel.com>
    mmc: longer timeout for long read time quirk

Lv Zheng <lv.zheng@intel.com>
    ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal strings

Adrian Hunter <adrian.hunter@intel.com>
    mmc: mmc: Fix partition switch timeout for some eMMCs

Roger Quadros <rogerq@ti.com>
    mfd: omap-usb-tll: Fix scheduling while atomic BUG

Catalin Vasile <cata.vasile@nxp.com>
    crypto: caam - fix caam_jr_alloc() ret code

Steven Rostedt (Red Hat) <rostedt@goodmis.org>
    ring-buffer: Prevent overflow of size in ring_buffer_resize()

Steven Rostedt (Red Hat) <rostedt@goodmis.org>
    ring-buffer: Use long for nr_pages to avoid overflow failures

Stefan Metzmacher <metze@samba.org>
    fs/cifs: correctly to anonymous authentication via NTLMSSP

Steve French <smfrench@gmail.com>
    remove directory incorrectly tries to set delete on close on non-empty directories

Marc Zyngier <marc.zyngier@arm.com>
    arm/arm64: KVM: Enforce Break-Before-Make on Stage-2 page tables

Josef Bacik <jbacik@fb.com>
    Btrfs: don't use src fd for printk


-------------

Diffstat:

 Makefile                         |  4 +--
 arch/arm/kvm/mmu.c               | 17 +++++++-----
 drivers/acpi/osl.c               | 16 ++++++++----
 drivers/bluetooth/hci_vhci.c     |  1 +
 drivers/crypto/caam/jr.c         |  2 +-
 drivers/mfd/omap-usb-tll.c       | 13 +++++++---
 drivers/mmc/card/block.c         |  5 ++--
 drivers/mmc/core/core.c          |  4 +--
 drivers/mmc/core/mmc.c           |  7 +++++
 drivers/tty/serial/samsung.c     |  4 +--
 drivers/tty/vt/vt.c              |  5 ++--
 drivers/usb/serial/io_edgeport.c | 56 +++++++++++++++++++++++++++-------------
 drivers/usb/serial/keyspan.c     |  4 +++
 drivers/usb/serial/mxuport.c     | 10 +++++++
 drivers/usb/serial/option.c      | 26 ++++++++++++++-----
 drivers/usb/serial/quatech2.c    |  1 +
 fs/btrfs/ioctl.c                 |  2 +-
 fs/cifs/sess.c                   | 32 ++++++++++++++---------
 fs/cifs/smb2glob.h               |  1 +
 fs/cifs/smb2inode.c              |  8 ++++--
 fs/cifs/smb2pdu.c                | 16 ++++++++++++
 fs/cifs/smb2proto.h              |  2 ++
 kernel/trace/ring_buffer.c       | 35 +++++++++++++------------
 23 files changed, 189 insertions(+), 82 deletions(-)

[toc] | [next] | [standalone]

#1409622 — [PATCH 3.14 09/20] mmc: mmc: Fix partition switch timeout for some eMMCs

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adrian Hunter <adrian.hunter@intel.com>

commit 1c447116d017a98c90f8f71c8c5a611e0aa42178 upstream.

Some eMMCs set the partition switch timeout too low.

Now typically eMMCs are considered a critical component (e.g. because
they store the root file system) and consequently are expected to be
reliable.  Thus we can neglect the use case where eMMCs can't switch
reliably and we might want a lower timeout to facilitate speedy
recovery.

Although we could employ a quirk for the cards that are affected (if
we could identify them all), as described above, there is little
benefit to having a low timeout, so instead simply set a minimum
timeout.

The minimum is set to 300ms somewhat arbitrarily - the examples that
have been seen had a timeout of 10ms but were sometimes taking 60-70ms.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/core/mmc.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -267,6 +267,9 @@ static void mmc_select_card_type(struct
 	card->ext_csd.card_type = card_type;
 }
 
+/* Minimum partition switch timeout in milliseconds */
+#define MMC_MIN_PART_SWITCH_TIME	300
+
 /*
  * Decode extended CSD.
  */
@@ -331,6 +334,10 @@ static int mmc_read_ext_csd(struct mmc_c
 
 		/* EXT_CSD value is in units of 10ms, but we store in ms */
 		card->ext_csd.part_time = 10 * ext_csd[EXT_CSD_PART_SWITCH_TIME];
+		/* Some eMMC set the value too low so set a minimum */
+		if (card->ext_csd.part_time &&
+		    card->ext_csd.part_time < MMC_MIN_PART_SWITCH_TIME)
+			card->ext_csd.part_time = MMC_MIN_PART_SWITCH_TIME;
 
 		/* Sleep / awake timeout in 100ns units */
 		if (sa_shift > 0 && sa_shift <= 0x17)

[toc] | [prev] | [next] | [standalone]

#1409639 — [PATCH 3.14 13/20] USB: serial: mxuport: fix use-after-free in probe error path

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 9e45284984096314994777f27e1446dfbfd2f0d7 upstream.

The interface read and event URBs are submitted in attach, but were
never explicitly unlinked by the driver. Instead the URBs would have
been killed by usb-serial core on disconnect.

In case of a late probe error (e.g. due to failed minor allocation),
disconnect is never called and we could end up with active URBs for an
unbound interface. This in turn could lead to deallocated memory being
dereferenced in the completion callbacks.

Fixes: ee467a1f2066 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX
driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/mxuport.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/usb/serial/mxuport.c
+++ b/drivers/usb/serial/mxuport.c
@@ -1263,6 +1263,15 @@ static int mxuport_attach(struct usb_ser
 	return 0;
 }
 
+static void mxuport_release(struct usb_serial *serial)
+{
+	struct usb_serial_port *port0 = serial->port[0];
+	struct usb_serial_port *port1 = serial->port[1];
+
+	usb_serial_generic_close(port1);
+	usb_serial_generic_close(port0);
+}
+
 static int mxuport_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct mxuport_port *mxport = usb_get_serial_port_data(port);
@@ -1365,6 +1374,7 @@ static struct usb_serial_driver mxuport_
 	.probe			= mxuport_probe,
 	.port_probe		= mxuport_port_probe,
 	.attach			= mxuport_attach,
+	.release		= mxuport_release,
 	.calc_num_ports		= mxuport_calc_num_ports,
 	.open			= mxuport_open,
 	.close			= mxuport_close,

[toc] | [prev] | [next] | [standalone]

#1409644 — [PATCH 3.14 18/20] USB: serial: option: add support for Cinterion PH8 and AHxx

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Schemmel Hans-Christoph <Hans-Christoph.Schemmel@gemalto.com>

commit 444f94e9e625f6ec6bbe2cb232a6451c637f35a3 upstream.

Added support for Gemalto's Cinterion PH8 and AHxx products
with 2 RmNet Interfaces and products with 1 RmNet + 1 USB Audio interface.

In addition some minor renaming and formatting.

Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com>
[johan: sort current entries and trim trailing whitespace ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |   26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -375,18 +375,22 @@ static void option_instat_callback(struc
 #define HAIER_PRODUCT_CE81B			0x10f8
 #define HAIER_PRODUCT_CE100			0x2009
 
-/* Cinterion (formerly Siemens) products */
-#define SIEMENS_VENDOR_ID				0x0681
-#define CINTERION_VENDOR_ID				0x1e2d
+/* Gemalto's Cinterion products (formerly Siemens) */
+#define SIEMENS_VENDOR_ID			0x0681
+#define CINTERION_VENDOR_ID			0x1e2d
+#define CINTERION_PRODUCT_HC25_MDMNET		0x0040
 #define CINTERION_PRODUCT_HC25_MDM		0x0047
-#define CINTERION_PRODUCT_HC25_MDMNET	0x0040
+#define CINTERION_PRODUCT_HC28_MDMNET		0x004A /* same for HC28J */
 #define CINTERION_PRODUCT_HC28_MDM		0x004C
-#define CINTERION_PRODUCT_HC28_MDMNET	0x004A /* same for HC28J */
 #define CINTERION_PRODUCT_EU3_E			0x0051
 #define CINTERION_PRODUCT_EU3_P			0x0052
 #define CINTERION_PRODUCT_PH8			0x0053
 #define CINTERION_PRODUCT_AHXX			0x0055
 #define CINTERION_PRODUCT_PLXX			0x0060
+#define CINTERION_PRODUCT_PH8_2RMNET		0x0082
+#define CINTERION_PRODUCT_PH8_AUDIO		0x0083
+#define CINTERION_PRODUCT_AHXX_2RMNET		0x0084
+#define CINTERION_PRODUCT_AHXX_AUDIO		0x0085
 
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
@@ -641,6 +645,10 @@ static const struct option_blacklist_inf
 	.reserved = BIT(1) | BIT(2) | BIT(3),
 };
 
+static const struct option_blacklist_info cinterion_rmnet2_blacklist = {
+	.reserved = BIT(4) | BIT(5),
+};
+
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -1712,7 +1720,13 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX, 0xff) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, 
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_2RMNET, 0xff),
+		.driver_info = (kernel_ulong_t)&cinterion_rmnet2_blacklist },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_AUDIO, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) },

[toc] | [prev] | [next] | [standalone]

#1409648 — [PATCH 3.14 08/20] mfd: omap-usb-tll: Fix scheduling while atomic BUG

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roger Quadros <rogerq@ti.com>

commit b49b927f16acee626c56a1af4ab4cb062f75b5df upstream.

We shouldn't be calling clk_prepare_enable()/clk_prepare_disable()
in an atomic context.

Fixes the following issue:

[    5.830970] ehci-omap: OMAP-EHCI Host Controller driver
[    5.830974] driver_register 'ehci-omap'
[    5.895849] driver_register 'wl1271_sdio'
[    5.896870] BUG: scheduling while atomic: udevd/994/0x00000002
[    5.896876] 4 locks held by udevd/994:
[    5.896904]  #0:  (&dev->mutex){......}, at: [<c049597c>] __driver_attach+0x60/0xac
[    5.896923]  #1:  (&dev->mutex){......}, at: [<c049598c>] __driver_attach+0x70/0xac
[    5.896946]  #2:  (tll_lock){+.+...}, at: [<c04c2630>] omap_tll_enable+0x2c/0xd0
[    5.896966]  #3:  (prepare_lock){+.+...}, at: [<c05ce9c8>] clk_prepare_lock+0x48/0xe0
[    5.897042] Modules linked in: wlcore_sdio(+) ehci_omap(+) dwc3_omap snd_soc_ts3a225e leds_is31fl319x bq27xxx_battery_i2c tsc2007 bq27xxx_battery bq2429x_charger ina2xx tca8418_keypad as5013 leds_tca6507 twl6040_vibra gpio_twl6040 bmp085_i2c(+) palmas_gpadc usb3503 palmas_pwrbutton bmg160_i2c(+) bmp085 bma150(+) bmg160_core bmp280 input_polldev snd_soc_omap_mcbsp snd_soc_omap_mcpdm snd_soc_omap snd_pcm_dmaengine
[    5.897048] Preemption disabled at:[<  (null)>]   (null)
[    5.897051]
[    5.897059] CPU: 0 PID: 994 Comm: udevd Not tainted 4.6.0-rc5-letux+ #233
[    5.897062] Hardware name: Generic OMAP5 (Flattened Device Tree)
[    5.897076] [<c010e714>] (unwind_backtrace) from [<c010af34>] (show_stack+0x10/0x14)
[    5.897087] [<c010af34>] (show_stack) from [<c040aa7c>] (dump_stack+0x88/0xc0)
[    5.897099] [<c040aa7c>] (dump_stack) from [<c020c558>] (__schedule_bug+0xac/0xd0)
[    5.897111] [<c020c558>] (__schedule_bug) from [<c06f3d44>] (__schedule+0x88/0x7e4)
[    5.897120] [<c06f3d44>] (__schedule) from [<c06f46d8>] (schedule+0x9c/0xc0)
[    5.897129] [<c06f46d8>] (schedule) from [<c06f4904>] (schedule_preempt_disabled+0x14/0x20)
[    5.897140] [<c06f4904>] (schedule_preempt_disabled) from [<c06f64e4>] (mutex_lock_nested+0x258/0x43c)
[    5.897150] [<c06f64e4>] (mutex_lock_nested) from [<c05ce9c8>] (clk_prepare_lock+0x48/0xe0)
[    5.897160] [<c05ce9c8>] (clk_prepare_lock) from [<c05d0e7c>] (clk_prepare+0x10/0x28)
[    5.897169] [<c05d0e7c>] (clk_prepare) from [<c04c2668>] (omap_tll_enable+0x64/0xd0)
[    5.897180] [<c04c2668>] (omap_tll_enable) from [<c04c1728>] (usbhs_runtime_resume+0x18/0x17c)
[    5.897192] [<c04c1728>] (usbhs_runtime_resume) from [<c049d404>] (pm_generic_runtime_resume+0x2c/0x40)
[    5.897202] [<c049d404>] (pm_generic_runtime_resume) from [<c049f180>] (__rpm_callback+0x38/0x68)
[    5.897210] [<c049f180>] (__rpm_callback) from [<c049f220>] (rpm_callback+0x70/0x88)
[    5.897218] [<c049f220>] (rpm_callback) from [<c04a0a00>] (rpm_resume+0x4ec/0x7ec)
[    5.897227] [<c04a0a00>] (rpm_resume) from [<c04a0f48>] (__pm_runtime_resume+0x4c/0x64)
[    5.897236] [<c04a0f48>] (__pm_runtime_resume) from [<c04958dc>] (driver_probe_device+0x30/0x70)
[    5.897246] [<c04958dc>] (driver_probe_device) from [<c04959a4>] (__driver_attach+0x88/0xac)
[    5.897256] [<c04959a4>] (__driver_attach) from [<c04940f8>] (bus_for_each_dev+0x50/0x84)
[    5.897267] [<c04940f8>] (bus_for_each_dev) from [<c0494e40>] (bus_add_driver+0xcc/0x1e4)
[    5.897276] [<c0494e40>] (bus_add_driver) from [<c0496914>] (driver_register+0xac/0xf4)
[    5.897286] [<c0496914>] (driver_register) from [<c01018e0>] (do_one_initcall+0x100/0x1b8)
[    5.897296] [<c01018e0>] (do_one_initcall) from [<c01c7a54>] (do_init_module+0x58/0x1c0)
[    5.897304] [<c01c7a54>] (do_init_module) from [<c01c8a3c>] (SyS_finit_module+0x88/0x90)
[    5.897313] [<c01c8a3c>] (SyS_finit_module) from [<c0107120>] (ret_fast_syscall+0x0/0x1c)
[    5.912697] ------------[ cut here ]------------
[    5.912711] WARNING: CPU: 0 PID: 994 at kernel/sched/core.c:2996 _raw_spin_unlock+0x28/0x58
[    5.912717] DEBUG_LOCKS_WARN_ON(val > preempt_count())

Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mfd/omap-usb-tll.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -269,6 +269,8 @@ static int usbtll_omap_probe(struct plat
 
 		if (IS_ERR(tll->ch_clk[i]))
 			dev_dbg(dev, "can't get clock : %s\n", clkname);
+		else
+			clk_prepare(tll->ch_clk[i]);
 	}
 
 	pm_runtime_put_sync(dev);
@@ -301,9 +303,12 @@ static int usbtll_omap_remove(struct pla
 	tll_dev = NULL;
 	spin_unlock(&tll_lock);
 
-	for (i = 0; i < tll->nch; i++)
-		if (!IS_ERR(tll->ch_clk[i]))
+	for (i = 0; i < tll->nch; i++) {
+		if (!IS_ERR(tll->ch_clk[i])) {
+			clk_unprepare(tll->ch_clk[i]);
 			clk_put(tll->ch_clk[i]);
+		}
+	}
 
 	pm_runtime_disable(&pdev->dev);
 	return 0;
@@ -421,7 +426,7 @@ int omap_tll_enable(struct usbhs_omap_pl
 			if (IS_ERR(tll->ch_clk[i]))
 				continue;
 
-			r = clk_prepare_enable(tll->ch_clk[i]);
+			r = clk_enable(tll->ch_clk[i]);
 			if (r) {
 				dev_err(tll_dev,
 				 "Error enabling ch %d clock: %d\n", i, r);
@@ -449,7 +454,7 @@ int omap_tll_disable(struct usbhs_omap_p
 	for (i = 0; i < tll->nch; i++) {
 		if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
 			if (!IS_ERR(tll->ch_clk[i]))
-				clk_disable_unprepare(tll->ch_clk[i]);
+				clk_disable(tll->ch_clk[i]);
 		}
 	}
 

[toc] | [prev] | [next] | [standalone]

#1409653 — [PATCH 3.14 06/20] ring-buffer: Prevent overflow of size in ring_buffer_resize()

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (Red Hat) <rostedt@goodmis.org>

commit 59643d1535eb220668692a5359de22545af579f6 upstream.

If the size passed to ring_buffer_resize() is greater than MAX_LONG - BUF_PAGE_SIZE
then the DIV_ROUND_UP() will return zero.

Here's the details:

  # echo 18014398509481980 > /sys/kernel/debug/tracing/buffer_size_kb

tracing_entries_write() processes this and converts kb to bytes.

 18014398509481980 << 10 = 18446744073709547520

and this is passed to ring_buffer_resize() as unsigned long size.

 size = DIV_ROUND_UP(size, BUF_PAGE_SIZE);

Where DIV_ROUND_UP(a, b) is (a + b - 1)/b

BUF_PAGE_SIZE is 4080 and here

 18446744073709547520 + 4080 - 1 = 18446744073709551599

where 18446744073709551599 is still smaller than 2^64

 2^64 - 18446744073709551599 = 17

But now 18446744073709551599 / 4080 = 4521260802379792

and size = size * 4080 = 18446744073709551360

This is checked to make sure its still greater than 2 * 4080,
which it is.

Then we convert to the number of buffer pages needed.

 nr_page = DIV_ROUND_UP(size, BUF_PAGE_SIZE)

but this time size is 18446744073709551360 and

 2^64 - (18446744073709551360 + 4080 - 1) = -3823

Thus it overflows and the resulting number is less than 4080, which makes

  3823 / 4080 = 0

an nr_pages is set to this. As we already checked against the minimum that
nr_pages may be, this causes the logic to fail as well, and we crash the
kernel.

There's no reason to have the two DIV_ROUND_UP() (that's just result of
historical code changes), clean up the code and fix this bug.

Fixes: 83f40318dab00 ("ring-buffer: Make removal of ring buffer pages atomic")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ring_buffer.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1645,14 +1645,13 @@ int ring_buffer_resize(struct ring_buffe
 	    !cpumask_test_cpu(cpu_id, buffer->cpumask))
 		return size;
 
-	size = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
-	size *= BUF_PAGE_SIZE;
+	nr_pages = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
 
 	/* we need a minimum of two pages */
-	if (size < BUF_PAGE_SIZE * 2)
-		size = BUF_PAGE_SIZE * 2;
+	if (nr_pages < 2)
+		nr_pages = 2;
 
-	nr_pages = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
+	size = nr_pages * BUF_PAGE_SIZE;
 
 	/*
 	 * Don't succeed if resizing is disabled, as a reader might be

[toc] | [prev] | [next] | [standalone]

#1409658 — [PATCH 3.14 15/20] USB: serial: quatech2: fix use-after-free in probe error path

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 028c49f5e02a257c94129cd815f7c8485f51d4ef upstream.

The interface read URB is submitted in attach, but was only unlinked by
the driver at disconnect.

In case of a late probe error (e.g. due to failed minor allocation),
disconnect is never called and we would end up with active URBs for an
unbound interface. This in turn could lead to deallocated memory being
dereferenced in the completion callback.

Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/quatech2.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -141,6 +141,7 @@ static void qt2_release(struct usb_seria
 
 	serial_priv = usb_get_serial_data(serial);
 
+	usb_kill_urb(serial_priv->read_urb);
 	usb_free_urb(serial_priv->read_urb);
 	kfree(serial_priv->read_buffer);
 	kfree(serial_priv);

[toc] | [prev] | [next] | [standalone]

#1409666 — [PATCH 3.14 11/20] mmc: longer timeout for long read time quirk

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matt Gumbel <matthew.k.gumbel@intel.com>

commit 32ecd320db39bcb007679ed42f283740641b81ea upstream.

008GE0 Toshiba mmc in some Intel Baytrail tablets responds to
MMC_SEND_EXT_CSD in 450-600ms.

This patch will...

() Increase the long read time quirk timeout from 300ms to 600ms. Original
   author of that quirk says 300ms was only a guess and that the number
   may need to be raised in the future.

() Add this specific MMC to the quirk

Signed-off-by: Matt Gumbel <matthew.k.gumbel@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/card/block.c |    5 +++--
 drivers/mmc/core/core.c  |    4 ++--
 2 files changed, 5 insertions(+), 4 deletions(-)

--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -2352,11 +2352,12 @@ static const struct mmc_fixup blk_fixups
 		  MMC_QUIRK_BLK_NO_CMD23),
 
 	/*
-	 * Some Micron MMC cards needs longer data read timeout than
-	 * indicated in CSD.
+	 * Some MMC cards need longer data read timeout than indicated in CSD.
 	 */
 	MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc,
 		  MMC_QUIRK_LONG_READ_TIME),
+	MMC_FIXUP("008GE0", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_LONG_READ_TIME),
 
 	/*
 	 * On these Samsung MoviNAND parts, performing secure erase or
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -822,11 +822,11 @@ void mmc_set_data_timeout(struct mmc_dat
 	/*
 	 * Some cards require longer data read timeout than indicated in CSD.
 	 * Address this by setting the read timeout to a "reasonably high"
-	 * value. For the cards tested, 300ms has proven enough. If necessary,
+	 * value. For the cards tested, 600ms has proven enough. If necessary,
 	 * this value can be increased if other problematic cards require this.
 	 */
 	if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) {
-		data->timeout_ns = 300000000;
+		data->timeout_ns = 600000000;
 		data->timeout_clks = 0;
 	}
 

[toc] | [prev] | [next] | [standalone]

#1409667 — [PATCH 3.14 10/20] ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal strings

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lv Zheng <lv.zheng@intel.com>

commit 30c9bb0d7603e7b3f4d6a0ea231e1cddae020c32 upstream.

The order of the _OSI related functionalities is as follows:

  acpi_blacklisted()
    acpi_dmi_osi_linux()
      acpi_osi_setup()
    acpi_osi_setup()
      acpi_update_interfaces() if "!*"
      <<<<<<<<<<<<<<<<<<<<<<<<
  parse_args()
    __setup("acpi_osi=")
      acpi_osi_setup_linux()
        acpi_update_interfaces() if "!*"
        <<<<<<<<<<<<<<<<<<<<<<<<
  acpi_early_init()
    acpi_initialize_subsystem()
      acpi_ut_initialize_interfaces()
      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  acpi_bus_init()
    acpi_os_initialize1()
      acpi_install_interface_handler(acpi_osi_handler)
      acpi_osi_setup_late()
        acpi_update_interfaces() for "!"
        >>>>>>>>>>>>>>>>>>>>>>>>
  acpi_osi_handler()

Since acpi_osi_setup_linux() can override acpi_dmi_osi_linux(), the command
line setting can override the DMI detection. That's why acpi_blacklisted()
is put before __setup("acpi_osi=").

Then we can notice the following wrong invocation order. There are
acpi_update_interfaces() (marked by <<<<) calls invoked before
acpi_ut_initialize_interfaces() (marked by ^^^^). This makes it impossible
to use acpi_osi=!* correctly from OSI DMI table or from the command line.
The use of acpi_osi=!* is meant to disable both ACPICA
(acpi_gbl_supported_interfaces) and Linux specific strings
(osi_setup_entries) while the ACPICA part should have stopped working
because of the order issue.

This patch fixes this issue by moving acpi_update_interfaces() to where
it is invoked for acpi_osi=! (marked by >>>>) as this is ensured to be
invoked after acpi_ut_initialize_interfaces() (marked by ^^^^). Linux
specific strings are still handled in the original place in order to make
the following command line working: acpi_osi=!* acpi_osi="Module Device".

Note that since acpi_osi=!* is meant to further disable linux specific
string comparing to the acpi_osi=!, there is no such use case in our bug
fixing work and hence there is no one using acpi_osi=!* either from the
command line or from the DMI quirks, this issue is just a theoretical
issue.

Fixes: 741d81280ad2 (ACPI: Add facility to remove all _OSI strings)
Tested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/osl.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -138,7 +138,7 @@ static struct osi_linux {
 	unsigned int	enable:1;
 	unsigned int	dmi:1;
 	unsigned int	cmdline:1;
-	unsigned int	default_disabling:1;
+	u8		default_disabling;
 } osi_linux = {0, 0, 0, 0};
 
 static u32 acpi_osi_handler(acpi_string interface, u32 supported)
@@ -1420,10 +1420,13 @@ void __init acpi_osi_setup(char *str)
 	if (*str == '!') {
 		str++;
 		if (*str == '\0') {
-			osi_linux.default_disabling = 1;
+			/* Do not override acpi_osi=!* */
+			if (!osi_linux.default_disabling)
+				osi_linux.default_disabling =
+					ACPI_DISABLE_ALL_VENDOR_STRINGS;
 			return;
 		} else if (*str == '*') {
-			acpi_update_interfaces(ACPI_DISABLE_ALL_STRINGS);
+			osi_linux.default_disabling = ACPI_DISABLE_ALL_STRINGS;
 			for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
 				osi = &osi_setup_entries[i];
 				osi->enable = false;
@@ -1496,10 +1499,13 @@ static void __init acpi_osi_setup_late(v
 	acpi_status status;
 
 	if (osi_linux.default_disabling) {
-		status = acpi_update_interfaces(ACPI_DISABLE_ALL_VENDOR_STRINGS);
+		status = acpi_update_interfaces(osi_linux.default_disabling);
 
 		if (ACPI_SUCCESS(status))
-			printk(KERN_INFO PREFIX "Disabled all _OSI OS vendors\n");
+			printk(KERN_INFO PREFIX "Disabled all _OSI OS vendors%s\n",
+				osi_linux.default_disabling ==
+				ACPI_DISABLE_ALL_STRINGS ?
+				" and feature groups" : "");
 	}
 
 	for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {

[toc] | [prev] | [next] | [standalone]

#1409673 — [PATCH 3.14 14/20] USB: serial: keyspan: fix use-after-free in probe error path

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 35be1a71d70775e7bd7e45fa6d2897342ff4c9d2 upstream.

The interface instat and indat URBs were submitted in attach, but never
unlinked in release before deallocating the corresponding transfer
buffers.

In the case of a late probe error (e.g. due to failed minor allocation),
disconnect would not have been called before release, causing the
buffers to be freed while the URBs are still in use. We'd also end up
with active URBs for an unbound interface.

Fixes: f9c99bb8b3a1 ("USB: usb-serial: replace shutdown with disconnect,
release")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/keyspan.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2406,6 +2406,10 @@ static void keyspan_release(struct usb_s
 
 	s_priv = usb_get_serial_data(serial);
 
+	/* Make sure to unlink the URBs submitted in attach. */
+	usb_kill_urb(s_priv->instat_urb);
+	usb_kill_urb(s_priv->indat_urb);
+
 	usb_free_urb(s_priv->instat_urb);
 	usb_free_urb(s_priv->indat_urb);
 	usb_free_urb(s_priv->glocont_urb);

[toc] | [prev] | [next] | [standalone]

#1409674 — [PATCH 3.14 07/20] crypto: caam - fix caam_jr_alloc() ret code

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Catalin Vasile <cata.vasile@nxp.com>

commit e930c765ca5c6b039cd22ebfb4504ea7b5dab43d upstream.

caam_jr_alloc() used to return NULL if a JR device could not be
allocated for a session. In turn, every user of this function used
IS_ERR() function to verify if anything went wrong, which does NOT look
for NULL values. This made the kernel crash if the sanity check failed,
because the driver continued to think it had allocated a valid JR dev
instance to the session and at some point it tries to do a caam_jr_free()
on a NULL JR dev pointer.
This patch is a fix for this issue.

Signed-off-by: Catalin Vasile <cata.vasile@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/caam/jr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/crypto/caam/jr.c
+++ b/drivers/crypto/caam/jr.c
@@ -244,7 +244,7 @@ static void caam_jr_dequeue(unsigned lon
 struct device *caam_jr_alloc(void)
 {
 	struct caam_drv_private_jr *jrpriv, *min_jrpriv = NULL;
-	struct device *dev = NULL;
+	struct device *dev = ERR_PTR(-ENODEV);
 	int min_tfm_cnt	= INT_MAX;
 	int tfm_cnt;
 

[toc] | [prev] | [next] | [standalone]

#1409677 — [PATCH 3.14 17/20] USB: serial: io_edgeport: fix memory leaks in probe error path

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit c8d62957d450cc1a22ce3242908709fe367ddc8e upstream.

URBs and buffers allocated in attach for Epic devices would never be
deallocated in case of a later probe error (e.g. failure to allocate
minor numbers) as disconnect is then never called.

Fix by moving deallocation to release and making sure that the
URBs are first unlinked.

Fixes: f9c99bb8b3a1 ("USB: usb-serial: replace shutdown with disconnect,
release")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/io_edgeport.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2966,16 +2966,9 @@ static void edge_disconnect(struct usb_s
 {
 	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
 
-	/* stop reads and writes on all ports */
-	/* free up our endpoint stuff */
 	if (edge_serial->is_epic) {
 		usb_kill_urb(edge_serial->interrupt_read_urb);
-		usb_free_urb(edge_serial->interrupt_read_urb);
-		kfree(edge_serial->interrupt_in_buffer);
-
 		usb_kill_urb(edge_serial->read_urb);
-		usb_free_urb(edge_serial->read_urb);
-		kfree(edge_serial->bulk_in_buffer);
 	}
 }
 
@@ -2988,6 +2981,16 @@ static void edge_release(struct usb_seri
 {
 	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
 
+	if (edge_serial->is_epic) {
+		usb_kill_urb(edge_serial->interrupt_read_urb);
+		usb_free_urb(edge_serial->interrupt_read_urb);
+		kfree(edge_serial->interrupt_in_buffer);
+
+		usb_kill_urb(edge_serial->read_urb);
+		usb_free_urb(edge_serial->read_urb);
+		kfree(edge_serial->bulk_in_buffer);
+	}
+
 	kfree(edge_serial);
 }
 

[toc] | [prev] | [next] | [standalone]

#1409678 — [PATCH 3.14 03/20] remove directory incorrectly tries to set delete on close on non-empty directories

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve French <smfrench@gmail.com>

commit 897fba1172d637d344f009d700f7eb8a1fa262f1 upstream.

Wrong return code was being returned on SMB3 rmdir of
non-empty directory.

For SMB3 (unlike for cifs), we attempt to delete a directory by
set of delete on close flag on the open. Windows clients set
this flag via a set info (SET_FILE_DISPOSITION to set this flag)
which properly checks if the directory is empty.

With this patch on smb3 mounts we correctly return
 "DIRECTORY NOT EMPTY"
on attempts to remove a non-empty directory.

Signed-off-by: Steve French <steve.french@primarydata.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2glob.h  |    1 +
 fs/cifs/smb2inode.c |    8 ++++++--
 fs/cifs/smb2pdu.c   |   16 ++++++++++++++++
 fs/cifs/smb2proto.h |    2 ++
 4 files changed, 25 insertions(+), 2 deletions(-)

--- a/fs/cifs/smb2glob.h
+++ b/fs/cifs/smb2glob.h
@@ -44,6 +44,7 @@
 #define SMB2_OP_DELETE 7
 #define SMB2_OP_HARDLINK 8
 #define SMB2_OP_SET_EOF 9
+#define SMB2_OP_RMDIR 10
 
 /* Used when constructing chained read requests. */
 #define CHAINED_REQUEST 1
--- a/fs/cifs/smb2inode.c
+++ b/fs/cifs/smb2inode.c
@@ -80,6 +80,10 @@ smb2_open_op_close(const unsigned int xi
 		 * SMB2_open() call.
 		 */
 		break;
+	case SMB2_OP_RMDIR:
+		tmprc = SMB2_rmdir(xid, tcon, fid.persistent_fid,
+				   fid.volatile_fid);
+		break;
 	case SMB2_OP_RENAME:
 		tmprc = SMB2_rename(xid, tcon, fid.persistent_fid,
 				    fid.volatile_fid, (__le16 *)data);
@@ -191,8 +195,8 @@ smb2_rmdir(const unsigned int xid, struc
 	   struct cifs_sb_info *cifs_sb)
 {
 	return smb2_open_op_close(xid, tcon, cifs_sb, name, DELETE, FILE_OPEN,
-				  CREATE_NOT_FILE | CREATE_DELETE_ON_CLOSE,
-				  NULL, SMB2_OP_DELETE);
+				  CREATE_NOT_FILE,
+				  NULL, SMB2_OP_RMDIR);
 }
 
 int
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -2291,6 +2291,22 @@ SMB2_rename(const unsigned int xid, stru
 }
 
 int
+SMB2_rmdir(const unsigned int xid, struct cifs_tcon *tcon,
+		  u64 persistent_fid, u64 volatile_fid)
+{
+	__u8 delete_pending = 1;
+	void *data;
+	unsigned int size;
+
+	data = &delete_pending;
+	size = 1; /* sizeof __u8 */
+
+	return send_set_info(xid, tcon, persistent_fid, volatile_fid,
+			current->tgid, FILE_DISPOSITION_INFORMATION, 1, &data,
+			&size);
+}
+
+int
 SMB2_set_hardlink(const unsigned int xid, struct cifs_tcon *tcon,
 		  u64 persistent_fid, u64 volatile_fid, __le16 *target_file)
 {
--- a/fs/cifs/smb2proto.h
+++ b/fs/cifs/smb2proto.h
@@ -134,6 +134,8 @@ extern int SMB2_query_directory(const un
 extern int SMB2_rename(const unsigned int xid, struct cifs_tcon *tcon,
 		       u64 persistent_fid, u64 volatile_fid,
 		       __le16 *target_file);
+extern int SMB2_rmdir(const unsigned int xid, struct cifs_tcon *tcon,
+		      u64 persistent_fid, u64 volatile_fid);
 extern int SMB2_set_hardlink(const unsigned int xid, struct cifs_tcon *tcon,
 			     u64 persistent_fid, u64 volatile_fid,
 			     __le16 *target_file);

[toc] | [prev] | [next] | [standalone]

#1409679 — [PATCH 3.14 04/20] fs/cifs: correctly to anonymous authentication via NTLMSSP

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Metzmacher <metze@samba.org>

commit cfda35d98298131bf38fbad3ce4cd5ecb3cf18db upstream.

See [MS-NLMP] 3.2.5.1.2 Server Receives an AUTHENTICATE_MESSAGE from the Client:

   ...
   Set NullSession to FALSE
   If (AUTHENTICATE_MESSAGE.UserNameLen == 0 AND
      AUTHENTICATE_MESSAGE.NtChallengeResponse.Length == 0 AND
      (AUTHENTICATE_MESSAGE.LmChallengeResponse == Z(1)
       OR
       AUTHENTICATE_MESSAGE.LmChallengeResponse.Length == 0))
       -- Special case: client requested anonymous authentication
       Set NullSession to TRUE
   ...

Only server which map unknown users to guest will allow
access using a non-null NTChallengeResponse.

For Samba it's the "map to guest = bad user" option.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=11913

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/sess.c |   32 ++++++++++++++++++++------------
 1 file changed, 20 insertions(+), 12 deletions(-)

--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -399,19 +399,27 @@ int build_ntlmssp_auth_blob(unsigned cha
 	sec_blob->LmChallengeResponse.MaximumLength = 0;
 
 	sec_blob->NtChallengeResponse.BufferOffset = cpu_to_le32(tmp - pbuffer);
-	rc = setup_ntlmv2_rsp(ses, nls_cp);
-	if (rc) {
-		cifs_dbg(VFS, "Error %d during NTLMSSP authentication\n", rc);
-		goto setup_ntlmv2_ret;
-	}
-	memcpy(tmp, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
-			ses->auth_key.len - CIFS_SESS_KEY_SIZE);
-	tmp += ses->auth_key.len - CIFS_SESS_KEY_SIZE;
+	if (ses->user_name != NULL) {
+		rc = setup_ntlmv2_rsp(ses, nls_cp);
+		if (rc) {
+			cifs_dbg(VFS, "Error %d during NTLMSSP authentication\n", rc);
+			goto setup_ntlmv2_ret;
+		}
+		memcpy(tmp, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
+				ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+		tmp += ses->auth_key.len - CIFS_SESS_KEY_SIZE;
 
-	sec_blob->NtChallengeResponse.Length =
-			cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
-	sec_blob->NtChallengeResponse.MaximumLength =
-			cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+		sec_blob->NtChallengeResponse.Length =
+				cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+		sec_blob->NtChallengeResponse.MaximumLength =
+				cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+	} else {
+		/*
+		 * don't send an NT Response for anonymous access
+		 */
+		sec_blob->NtChallengeResponse.Length = 0;
+		sec_blob->NtChallengeResponse.MaximumLength = 0;
+	}
 
 	if (ses->domainName == NULL) {
 		sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);

[toc] | [prev] | [next] | [standalone]

#1409691 — [PATCH 3.14 20/20] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chanwoo Choi <cw00.choi@samsung.com>

commit b8995f527aac143e83d3900ff39357651ea4e0f6 upstream.

This patch fixes the broken serial log when changing the clock source
of uart device. Before disabling the original clock source, this patch
enables the new clock source to protect the clock off state for a split second.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

---
 drivers/tty/serial/samsung.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -734,6 +734,8 @@ static void s3c24xx_serial_set_termios(s
 	/* check to see if we need  to change clock source */
 
 	if (ourport->baudclk != clk) {
+		clk_prepare_enable(clk);
+
 		s3c24xx_serial_setsource(port, clk_sel);
 
 		if (!IS_ERR(ourport->baudclk)) {
@@ -741,8 +743,6 @@ static void s3c24xx_serial_set_termios(s
 			ourport->baudclk = ERR_PTR(-EINVAL);
 		}
 
-		clk_prepare_enable(clk);
-
 		ourport->baudclk = clk;
 		ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
 	}

[toc] | [prev] | [next] | [standalone]

#1409692 — [PATCH 3.14 02/20] arm/arm64: KVM: Enforce Break-Before-Make on Stage-2 page tables

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marc Zyngier <marc.zyngier@arm.com>

commit d4b9e0790aa764c0b01e18d4e8d33e93ba36d51f upstream.

The ARM architecture mandates that when changing a page table entry
from a valid entry to another valid entry, an invalid entry is first
written, TLB invalidated, and only then the new entry being written.

The current code doesn't respect this, directly writing the new
entry and only then invalidating TLBs. Let's fix it up.

Reported-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/kvm/mmu.c |   17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -682,11 +682,14 @@ static int stage2_set_pmd_huge(struct kv
 	VM_BUG_ON(pmd_present(*pmd) && pmd_pfn(*pmd) != pmd_pfn(*new_pmd));
 
 	old_pmd = *pmd;
-	kvm_set_pmd(pmd, *new_pmd);
-	if (pmd_present(old_pmd))
+	if (pmd_present(old_pmd)) {
+		pmd_clear(pmd);
 		kvm_tlb_flush_vmid_ipa(kvm, addr);
-	else
+	} else {
 		get_page(virt_to_page(pmd));
+	}
+
+	kvm_set_pmd(pmd, *new_pmd);
 	return 0;
 }
 
@@ -723,12 +726,14 @@ static int stage2_set_pte(struct kvm *kv
 
 	/* Create 2nd stage page table mapping - Level 3 */
 	old_pte = *pte;
-	kvm_set_pte(pte, *new_pte);
-	if (pte_present(old_pte))
+	if (pte_present(old_pte)) {
+		kvm_set_pte(pte, __pte(0));
 		kvm_tlb_flush_vmid_ipa(kvm, addr);
-	else
+	} else {
 		get_page(virt_to_page(pte));
+	}
 
+	kvm_set_pte(pte, *new_pte);
 	return 0;
 }
 

[toc] | [prev] | [next] | [standalone]

#1409694 — [PATCH 3.14 19/20] tty: vt, return error when con_startup fails

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Slaby <jslaby@suse.cz>

commit 6798df4c5fe0a7e6d2065cf79649a794e5ba7114 upstream.

When csw->con_startup() fails in do_register_con_driver, we return no
error (i.e. 0). This was changed back in 2006 by commit 3e795de763.
Before that we used to return -ENODEV.

So fix the return value to be -ENODEV in that case again.

Fixes: 3e795de763 ("VT binding: Add binding/unbinding support for the VT console")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: "Dan Carpenter" <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/vt/vt.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3512,9 +3512,10 @@ static int do_register_con_driver(const
 		goto err;
 
 	desc = csw->con_startup();
-
-	if (!desc)
+	if (!desc) {
+		retval = -ENODEV;
 		goto err;
+	}
 
 	retval = -EINVAL;
 

[toc] | [prev] | [next] | [standalone]

#1409695 — [PATCH 3.14 12/20] Bluetooth: vhci: purge unhandled skbs

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Slaby <jslaby@suse.cz>

commit 13407376b255325fa817798800117a839f3aa055 upstream.

The write handler allocates skbs and queues them into data->readq.
Read side should read them, if there is any. If there is none, skbs
should be dropped by hdev->flush. But this happens only if the device
is HCI_UP, i.e. hdev->power_on work was triggered already. When it was
not, skbs stay allocated in the queue when /dev/vhci is closed. So
purge the queue in ->release.

Program to reproduce:
	#include <err.h>
	#include <fcntl.h>
	#include <stdio.h>
	#include <unistd.h>

	#include <sys/stat.h>
	#include <sys/types.h>
	#include <sys/uio.h>

	int main()
	{
		char buf[] = { 0xff, 0 };
		struct iovec iov = {
			.iov_base = buf,
			.iov_len = sizeof(buf),
		};
		int fd;

		while (1) {
			fd = open("/dev/vhci", O_RDWR);
			if (fd < 0)
				err(1, "open");

			usleep(50);

			if (writev(fd, &iov, 1) < 0)
				err(1, "writev");

			usleep(50);

			close(fd);
		}

		return 0;
	}

Result:
kmemleak: 4609 new suspected memory leaks
unreferenced object 0xffff88059f4d5440 (size 232):
  comm "vhci", pid 1084, jiffies 4294912542 (age 37569.296s)
  hex dump (first 32 bytes):
    20 f0 23 87 05 88 ff ff 20 f0 23 87 05 88 ff ff   .#..... .#.....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
...
    [<ffffffff81ece010>] __alloc_skb+0x0/0x5a0
    [<ffffffffa021886c>] vhci_create_device+0x5c/0x580 [hci_vhci]
    [<ffffffffa0219436>] vhci_write+0x306/0x4c8 [hci_vhci]

Fixes: 23424c0d31 (Bluetooth: Add support creating virtual AMP controllers)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bluetooth/hci_vhci.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -340,6 +340,7 @@ static int vhci_release(struct inode *in
 		hci_free_dev(hdev);
 	}
 
+	skb_queue_purge(&data->readq);
 	file->private_data = NULL;
 	kfree(data);
 

[toc] | [prev] | [next] | [standalone]

#1409697 — [PATCH 3.14 05/20] ring-buffer: Use long for nr_pages to avoid overflow failures

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (Red Hat) <rostedt@goodmis.org>

commit 9b94a8fba501f38368aef6ac1b30e7335252a220 upstream.

The size variable to change the ring buffer in ftrace is a long. The
nr_pages used to update the ring buffer based on the size is int. On 64 bit
machines this can cause an overflow problem.

For example, the following will cause the ring buffer to crash:

 # cd /sys/kernel/debug/tracing
 # echo 10 > buffer_size_kb
 # echo 8556384240 > buffer_size_kb

Then you get the warning of:

 WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260

Which is:

  RB_WARN_ON(cpu_buffer, nr_removed);

Note each ring buffer page holds 4080 bytes.

This is because:

 1) 10 causes the ring buffer to have 3 pages.
    (10kb requires 3 * 4080 pages to hold)

 2) (2^31 / 2^10  + 1) * 4080 = 8556384240
    The value written into buffer_size_kb is shifted by 10 and then passed
    to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760

 3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE
    which is 4080. 8761737461760 / 4080 = 2147484672

 4) nr_pages is subtracted from the current nr_pages (3) and we get:
    2147484669. This value is saved in a signed integer nr_pages_to_update

 5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int
    turns into the value of -2147482627

 6) As the value is a negative number, in update_pages_handler() it is
    negated and passed to rb_remove_pages() and 2147482627 pages will
    be removed, which is much larger than 3 and it causes the warning
    because not all the pages asked to be removed were removed.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001

Fixes: 7a8e76a3829f1 ("tracing: unified trace buffer")
Reported-by: Hao Qin <QEver.cn@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ring_buffer.c |   26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -463,7 +463,7 @@ struct ring_buffer_per_cpu {
 	raw_spinlock_t			reader_lock;	/* serialize readers */
 	arch_spinlock_t			lock;
 	struct lock_class_key		lock_key;
-	unsigned int			nr_pages;
+	unsigned long			nr_pages;
 	struct list_head		*pages;
 	struct buffer_page		*head_page;	/* read from head */
 	struct buffer_page		*tail_page;	/* write to tail */
@@ -483,7 +483,7 @@ struct ring_buffer_per_cpu {
 	u64				write_stamp;
 	u64				read_stamp;
 	/* ring buffer pages to update, > 0 to add, < 0 to remove */
-	int				nr_pages_to_update;
+	long				nr_pages_to_update;
 	struct list_head		new_pages; /* new pages to add */
 	struct work_struct		update_pages_work;
 	struct completion		update_done;
@@ -1120,10 +1120,10 @@ static int rb_check_pages(struct ring_bu
 	return 0;
 }
 
-static int __rb_allocate_pages(int nr_pages, struct list_head *pages, int cpu)
+static int __rb_allocate_pages(long nr_pages, struct list_head *pages, int cpu)
 {
-	int i;
 	struct buffer_page *bpage, *tmp;
+	long i;
 
 	for (i = 0; i < nr_pages; i++) {
 		struct page *page;
@@ -1160,7 +1160,7 @@ free_pages:
 }
 
 static int rb_allocate_pages(struct ring_buffer_per_cpu *cpu_buffer,
-			     unsigned nr_pages)
+			     unsigned long nr_pages)
 {
 	LIST_HEAD(pages);
 
@@ -1185,7 +1185,7 @@ static int rb_allocate_pages(struct ring
 }
 
 static struct ring_buffer_per_cpu *
-rb_allocate_cpu_buffer(struct ring_buffer *buffer, int nr_pages, int cpu)
+rb_allocate_cpu_buffer(struct ring_buffer *buffer, long nr_pages, int cpu)
 {
 	struct ring_buffer_per_cpu *cpu_buffer;
 	struct buffer_page *bpage;
@@ -1284,8 +1284,9 @@ struct ring_buffer *__ring_buffer_alloc(
 					struct lock_class_key *key)
 {
 	struct ring_buffer *buffer;
+	long nr_pages;
 	int bsize;
-	int cpu, nr_pages;
+	int cpu;
 
 	/* keep it in its own cache line */
 	buffer = kzalloc(ALIGN(sizeof(*buffer), cache_line_size()),
@@ -1408,12 +1409,12 @@ static inline unsigned long rb_page_writ
 }
 
 static int
-rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned int nr_pages)
+rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned long nr_pages)
 {
 	struct list_head *tail_page, *to_remove, *next_page;
 	struct buffer_page *to_remove_page, *tmp_iter_page;
 	struct buffer_page *last_page, *first_page;
-	unsigned int nr_removed;
+	unsigned long nr_removed;
 	unsigned long head_bit;
 	int page_entries;
 
@@ -1630,7 +1631,7 @@ int ring_buffer_resize(struct ring_buffe
 			int cpu_id)
 {
 	struct ring_buffer_per_cpu *cpu_buffer;
-	unsigned nr_pages;
+	unsigned long nr_pages;
 	int cpu, err = 0;
 
 	/*
@@ -4609,8 +4610,9 @@ static int rb_cpu_notify(struct notifier
 	struct ring_buffer *buffer =
 		container_of(self, struct ring_buffer, cpu_notify);
 	long cpu = (long)hcpu;
-	int cpu_i, nr_pages_same;
-	unsigned int nr_pages;
+	long nr_pages_same;
+	int cpu_i;
+	unsigned long nr_pages;
 
 	switch (action) {
 	case CPU_UP_PREPARE:

[toc] | [prev] | [next] | [standalone]

#1409698 — [PATCH 3.14 01/20] Btrfs: dont use src fd for printk

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josef Bacik <jbacik@fb.com>

commit c79b4713304f812d3d6c95826fc3e5fc2c0b0c14 upstream.

The fd we pass in may not be on a btrfs file system, so don't try to do
BTRFS_I() on it.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/ioctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1574,7 +1574,7 @@ static noinline int btrfs_ioctl_snap_cre
 
 		src_inode = file_inode(src.file);
 		if (src_inode->i_sb != file_inode(file)->i_sb) {
-			btrfs_info(BTRFS_I(src_inode)->root->fs_info,
+			btrfs_info(BTRFS_I(file_inode(file))->root->fs_info,
 				   "Snapshot src from another FS");
 			ret = -EINVAL;
 		} else if (!inode_owner_or_capable(src_inode)) {

[toc] | [prev] | [next] | [standalone]

Page 1 of 2  [1] 2  Next page →

Back to top | Article view | linux.kernel

csiph-web