Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1406336 > unrolled thread

[PATCH 3/3] arm64: dts: Add Broadcom Northstar2 device tree entries for PDC driver.

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 3/3] arm64: dts: Add Broadcom Northstar2 device tree entries for PDC driver. Rob Rice <rob.rice@broadcom.com> - 2016-05-24 20:10 +0200

#1406336 — [PATCH 3/3] arm64: dts: Add Broadcom Northstar2 device tree entries for PDC driver.

From: Rob Rice <rrice@broadcom.com>

Add Broadcom Northstar2 SoC device tree entries for PDC driver.

Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
 arch/arm64/boot/dts/broadcom/ns2.dtsi | 36 +++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index ec68ec1..ba12702 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -191,6 +191,42 @@
 
 		#include "ns2-clock.dtsi"
 
+		pdc0: iproc-pdc0@612c0000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x612c0000 0x445>;  /* PDC FS0 regs */
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
+		pdc1: iproc-pdc1@612e0000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x612e0000 0x445>;  /* PDC FS1 regs */
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
+		pdc2: iproc-pdc2@61300000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x61300000 0x445>;  /* PDC FS2 regs */
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
+		pdc3: iproc-pdc3@61320000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x61320000 0x445>;  /* PDC FS3 regs */
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
 		dma0: dma@61360000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x61360000 0x1000>;
-- 
2.1.0

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web