Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1406028 > unrolled thread
| Started by | Neil Armstrong <narmstrong@baylibre.com> |
|---|---|
| First post | 2016-05-24 12:10 +0200 |
| Last post | 2016-05-24 15:00 +0200 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
[PATCH] pinctrl: oxnas: Add GPIO get_direction Neil Armstrong <narmstrong@baylibre.com> - 2016-05-24 12:10 +0200
Re: [PATCH] pinctrl: oxnas: Add GPIO get_direction Linus Walleij <linus.walleij@linaro.org> - 2016-05-24 15:00 +0200
| From | Neil Armstrong <narmstrong@baylibre.com> |
|---|---|
| Date | 2016-05-24 12:10 +0200 |
| Subject | [PATCH] pinctrl: oxnas: Add GPIO get_direction |
| Message-ID | <rChrI-1Tg-21@gated-at.bofh.it> |
Implement a get_direction callback for the OXNAS GPIO driver in order
to have pin output polarity in debugfs and new userspace ABI.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/pinctrl/pinctrl-oxnas.c | 11 +++++++++++
1 file changed, 11 insertions(+)
Linus,
Sorry, I should have implemented it earlier but I was focused to
have a clean driver for upstream !
Thanks,
Neil
diff --git a/drivers/pinctrl/pinctrl-oxnas.c b/drivers/pinctrl/pinctrl-oxnas.c
index 5fd113c..2c6abef 100644
--- a/drivers/pinctrl/pinctrl-oxnas.c
+++ b/drivers/pinctrl/pinctrl-oxnas.c
@@ -49,6 +49,7 @@
/* GPIO Registers */
#define INPUT_VALUE 0x00
+#define OUTPUT_EN 0x04
#define IRQ_PENDING 0x0c
#define OUTPUT_SET 0x14
#define OUTPUT_CLEAR 0x18
@@ -431,6 +432,15 @@ static int oxnas_gpio_request_enable(struct pinctrl_dev *pctldev,
return 0;
}
+static int oxnas_gpio_get_direction(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct oxnas_gpio_bank *bank = gpiochip_get_data(chip);
+ u32 mask = BIT(offset);
+
+ return !(readl_relaxed(bank->reg_base + OUTPUT_EN) & mask);
+}
+
static int oxnas_gpio_direction_input(struct gpio_chip *chip,
unsigned int offset)
{
@@ -664,6 +674,7 @@ static void oxnas_gpio_irq_handler(struct irq_desc *desc)
.label = "GPIO" #_bank, \
.request = gpiochip_generic_request, \
.free = gpiochip_generic_free, \
+ .get_direction = oxnas_gpio_get_direction, \
.direction_input = oxnas_gpio_direction_input, \
.direction_output = oxnas_gpio_direction_output, \
.get = oxnas_gpio_get, \
--
1.9.1
[toc] | [next] | [standalone]
| From | Linus Walleij <linus.walleij@linaro.org> |
|---|---|
| Date | 2016-05-24 15:00 +0200 |
| Message-ID | <rCk6j-3mY-19@gated-at.bofh.it> |
| In reply to | #1406028 |
On Tue, May 24, 2016 at 12:03 PM, Neil Armstrong <narmstrong@baylibre.com> wrote: > Implement a get_direction callback for the OXNAS GPIO driver in order > to have pin output polarity in debugfs and new userspace ABI. > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Patch applied. Yours, Linus Walleij
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web