Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1406844 > unrolled thread

Re: [PATCH v5 2/5] ARM: davinci: da8xx: Add CFGCHIP syscon platform declaration.

Started bySekhar Nori <nsekhar@ti.com>
First post2016-05-25 13:20 +0200
Last post2016-05-25 13:20 +0200
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  Re: [PATCH v5 2/5] ARM: davinci: da8xx: Add CFGCHIP syscon platform  declaration. Sekhar Nori <nsekhar@ti.com> - 2016-05-25 13:20 +0200

#1406844 — Re: [PATCH v5 2/5] ARM: davinci: da8xx: Add CFGCHIP syscon platform declaration.

FromSekhar Nori <nsekhar@ti.com>
Date2016-05-25 13:20 +0200
SubjectRe: [PATCH v5 2/5] ARM: davinci: da8xx: Add CFGCHIP syscon platform declaration.
Message-ID<rCF0Z-kh-3@gated-at.bofh.it>
On Tuesday 10 May 2016 10:14 PM, David Lechner wrote:
> On 05/10/2016 06:26 AM, Sergei Shtylyov wrote:
>> On 5/10/2016 2:46 AM, David Lechner wrote:
>>
>>> The CFGCHIP registers are used by a number of devices, so using a syscon
>>> device to share them. The first consumer of this will by the
>>> phy-da8xx-usb
>>> driver.
>>>
>>> Signed-off-by: David Lechner <david@lechnology.com>
>> [...]
>>> diff --git a/arch/arm/mach-davinci/devices-da8xx.c
>>> b/arch/arm/mach-davinci/devices-da8xx.c
>>> index 725e693..69d11a1 100644
>>> --- a/arch/arm/mach-davinci/devices-da8xx.c
>>> +++ b/arch/arm/mach-davinci/devices-da8xx.c
>>> @@ -11,6 +11,7 @@
>>>   * (at your option) any later version.
>>>   */
>>>  #include <linux/init.h>
>>> +#include <linux/platform_data/syscon.h>
>>>  #include <linux/platform_device.h>
>>>  #include <linux/dma-contiguous.h>
>>>  #include <linux/serial_8250.h>
>>> @@ -1109,3 +1110,30 @@ int __init da850_register_sata(unsigned long
>>> refclkpn)
>>>      return platform_device_register(&da850_sata_device);
>>>  }
>>>  #endif
>>> +
>>> +static struct syscon_platform_data da8xx_cfgchip_platform_data = {
>>> +    .label    = "cfgchip",
>>> +};
>>> +
>>> +static struct resource da8xx_cfgchip_resources[] = {
>>> +    {
>>> +        .start    = DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP0_REG,
>>> +        .end    = DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP4_REG + 3,
>>> +        .flags    = IORESOURCE_MEM,
>>> +    },
>>> +};
>>> +
>>> +static struct platform_device da8xx_cfgchip_device = {
>>> +    .name    = "syscon",
>>> +    .id    = 0,
>>
>>     Again, -1.
>>
>> [...]
>>
>> MBR, Sergei
>>
> 
> I wish you would have noticed this when I first submitted it. I remember
> going back and forth about this. But it has been too long and I can't
> remember the reason why I chose to go this way.
> 
> It seems like changing it broke something with either this one or the
> phy device and I opted to keep it this way on both to be consistent. For
> example, the USB devices both use id = 0 as well even though there are
> only one of each type.

Agree with Sergei here. Can you confirm what broke exactly? I think the
USB needs to be fixed too.

Thanks,
Sekhar

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web