Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1405576 > unrolled thread
| Started by | Crestez Dan Leonard <leonard.crestez@intel.com> |
|---|---|
| First post | 2016-05-23 20:50 +0200 |
| Last post | 2016-05-29 21:40 +0200 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCHv3 1/7] iio: generic_buffer: Cleanup when receiving signals Crestez Dan Leonard <leonard.crestez@intel.com> - 2016-05-23 20:50 +0200
Re: [PATCHv3 1/7] iio: generic_buffer: Cleanup when receiving signals Jonathan Cameron <jic23@kernel.org> - 2016-05-29 21:40 +0200
| From | Crestez Dan Leonard <leonard.crestez@intel.com> |
|---|---|
| Date | 2016-05-23 20:50 +0200 |
| Subject | [PATCHv3 1/7] iio: generic_buffer: Cleanup when receiving signals |
| Message-ID | <rC35o-13f-27@gated-at.bofh.it> |
This will clean (disable buffer/trigger/channels) when doing
something like a CTRL-C. Otherwise restarting generic_buffer requires a
manual echo 0 > buffer/enable
This also cleanup up all the code freeing string buffers at
the end of main. We initialize all pointers to NULL so that cleanup can
all be done under a single error label.
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
---
Changes since v2: Initialize data to NULL to prevent crash on free.
tools/iio/generic_buffer.c | 172 ++++++++++++++++++++++++++++-----------------
1 file changed, 108 insertions(+), 64 deletions(-)
diff --git a/tools/iio/generic_buffer.c b/tools/iio/generic_buffer.c
index 2429c78..972f400 100644
--- a/tools/iio/generic_buffer.c
+++ b/tools/iio/generic_buffer.c
@@ -32,6 +32,8 @@
#include <endian.h>
#include <getopt.h>
#include <inttypes.h>
+#include <stdbool.h>
+#include <signal.h>
#include "iio_utils.h"
/**
@@ -254,6 +256,65 @@ void print_usage(void)
" -w <n> Set delay between reads in us (event-less mode)\n");
}
+enum autochan autochannels = AUTOCHANNELS_DISABLED;
+char *dev_dir_name = NULL;
+char *buf_dir_name = NULL;
+bool current_trigger_set = false;
+
+void cleanup(void)
+{
+ int ret;
+
+ /* Disable trigger */
+ if (dev_dir_name && current_trigger_set) {
+ /* Disconnect the trigger - just write a dummy name. */
+ ret = write_sysfs_string("trigger/current_trigger",
+ dev_dir_name, "NULL");
+ if (ret < 0)
+ fprintf(stderr, "Failed to disable trigger: %s\n",
+ strerror(-ret));
+ current_trigger_set = false;
+ }
+
+ /* Disable buffer */
+ if (buf_dir_name) {
+ ret = write_sysfs_int("enable", buf_dir_name, 0);
+ if (ret < 0)
+ fprintf(stderr, "Failed to disable buffer: %s\n",
+ strerror(-ret));
+ }
+
+ /* Disable channels if auto-enabled */
+ if (dev_dir_name && autochannels == AUTOCHANNELS_ACTIVE) {
+ ret = enable_disable_all_channels(dev_dir_name, 0);
+ if (ret)
+ fprintf(stderr, "Failed to disable all channels\n");
+ autochannels = AUTOCHANNELS_DISABLED;
+ }
+}
+
+void sig_handler(int signum)
+{
+ fprintf(stderr, "Caught signal %d\n", signum);
+ cleanup();
+ exit(-signum);
+}
+
+void register_cleanup(void)
+{
+ struct sigaction sa = { .sa_handler = sig_handler };
+ const int signums[] = { SIGINT, SIGTERM, SIGABRT };
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(signums); ++i) {
+ ret = sigaction(signums[i], &sa, NULL);
+ if (ret) {
+ perror("Failed to register signal handler");
+ exit(-1);
+ }
+ }
+}
+
int main(int argc, char **argv)
{
unsigned long num_loops = 2;
@@ -261,25 +322,24 @@ int main(int argc, char **argv)
unsigned long buf_len = 128;
int ret, c, i, j, toread;
- int fp;
+ int fp = -1;
- int num_channels;
+ int num_channels = 0;
char *trigger_name = NULL, *device_name = NULL;
- char *dev_dir_name, *buf_dir_name;
- int datardytrigger = 1;
- char *data;
+ char *data = NULL;
ssize_t read_size;
int dev_num, trig_num;
- char *buffer_access;
+ char *buffer_access = NULL;
int scan_size;
int noevents = 0;
int notrigger = 0;
- enum autochan autochannels = AUTOCHANNELS_DISABLED;
char *dummy;
struct iio_channel_info *channels;
+ register_cleanup();
+
while ((c = getopt(argc, argv, "ac:egl:n:t:w:")) != -1) {
switch (c) {
case 'a':
@@ -288,8 +348,10 @@ int main(int argc, char **argv)
case 'c':
errno = 0;
num_loops = strtoul(optarg, &dummy, 10);
- if (errno)
- return -errno;
+ if (errno) {
+ ret = -errno;
+ goto error;
+ }
break;
case 'e':
@@ -301,26 +363,30 @@ int main(int argc, char **argv)
case 'l':
errno = 0;
buf_len = strtoul(optarg, &dummy, 10);
- if (errno)
- return -errno;
+ if (errno) {
+ ret = -errno;
+ goto error;
+ }
break;
case 'n':
device_name = optarg;
break;
case 't':
- trigger_name = optarg;
- datardytrigger = 0;
+ trigger_name = strdup(optarg);
break;
case 'w':
errno = 0;
timedelay = strtoul(optarg, &dummy, 10);
- if (errno)
- return -errno;
+ if (errno) {
+ ret = -errno;
+ goto error;
+ }
break;
case '?':
print_usage();
- return -1;
+ ret = -1;
+ goto error;
}
}
@@ -334,14 +400,17 @@ int main(int argc, char **argv)
dev_num = find_type_by_name(device_name, "iio:device");
if (dev_num < 0) {
fprintf(stderr, "Failed to find the %s\n", device_name);
- return dev_num;
+ ret = dev_num;
+ goto error;
}
printf("iio device number being used is %d\n", dev_num);
ret = asprintf(&dev_dir_name, "%siio:device%d", iio_dir, dev_num);
- if (ret < 0)
- return -ENOMEM;
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error;
+ }
if (!notrigger) {
if (!trigger_name) {
@@ -354,7 +423,7 @@ int main(int argc, char **argv)
"%s-dev%d", device_name, dev_num);
if (ret < 0) {
ret = -ENOMEM;
- goto error_free_dev_dir_name;
+ goto error;
}
}
@@ -367,7 +436,7 @@ int main(int argc, char **argv)
"%s-trigger", device_name);
if (ret < 0) {
ret = -ENOMEM;
- goto error_free_dev_dir_name;
+ goto error;
}
}
@@ -376,7 +445,7 @@ int main(int argc, char **argv)
fprintf(stderr, "Failed to find the trigger %s\n",
trigger_name);
ret = trig_num;
- goto error_free_triggername;
+ goto error;
}
printf("iio trigger number being used is %d\n", trig_num);
@@ -392,7 +461,7 @@ int main(int argc, char **argv)
if (ret) {
fprintf(stderr, "Problem reading scan element information\n"
"diag %s\n", dev_dir_name);
- goto error_free_triggername;
+ goto error;
}
if (num_channels && autochannels == AUTOCHANNELS_ENABLED) {
fprintf(stderr, "Auto-channels selected but some channels "
@@ -407,7 +476,7 @@ int main(int argc, char **argv)
ret = enable_disable_all_channels(dev_dir_name, 1);
if (ret) {
fprintf(stderr, "Failed to enable all channels\n");
- goto error_free_triggername;
+ goto error;
}
/* This flags that we need to disable the channels again */
@@ -419,12 +488,12 @@ int main(int argc, char **argv)
fprintf(stderr, "Problem reading scan element "
"information\n"
"diag %s\n", dev_dir_name);
- goto error_disable_channels;
+ goto error;
}
if (!num_channels) {
fprintf(stderr, "Still no channels after "
"auto-enabling, giving up\n");
- goto error_disable_channels;
+ goto error;
}
}
@@ -436,7 +505,7 @@ int main(int argc, char **argv)
"/*_en or pass -a to autoenable channels and "
"try again.\n", dev_dir_name);
ret = -ENOENT;
- goto error_free_triggername;
+ goto error;
}
/*
@@ -448,7 +517,7 @@ int main(int argc, char **argv)
"%siio:device%d/buffer", iio_dir, dev_num);
if (ret < 0) {
ret = -ENOMEM;
- goto error_free_channels;
+ goto error;
}
if (!notrigger) {
@@ -463,34 +532,34 @@ int main(int argc, char **argv)
if (ret < 0) {
fprintf(stderr,
"Failed to write current_trigger file\n");
- goto error_free_buf_dir_name;
+ goto error;
}
}
/* Setup ring buffer parameters */
ret = write_sysfs_int("length", buf_dir_name, buf_len);
if (ret < 0)
- goto error_free_buf_dir_name;
+ goto error;
/* Enable the buffer */
ret = write_sysfs_int("enable", buf_dir_name, 1);
if (ret < 0) {
fprintf(stderr,
"Failed to enable buffer: %s\n", strerror(-ret));
- goto error_free_buf_dir_name;
+ goto error;
}
scan_size = size_from_channelarray(channels, num_channels);
data = malloc(scan_size * buf_len);
if (!data) {
ret = -ENOMEM;
- goto error_free_buf_dir_name;
+ goto error;
}
ret = asprintf(&buffer_access, "/dev/iio:device%d", dev_num);
if (ret < 0) {
ret = -ENOMEM;
- goto error_free_data;
+ goto error;
}
/* Attempt to open non blocking the access dev */
@@ -498,7 +567,7 @@ int main(int argc, char **argv)
if (fp == -1) { /* TODO: If it isn't there make the node */
ret = -errno;
fprintf(stderr, "Failed to open %s\n", buffer_access);
- goto error_free_buffer_access;
+ goto error;
}
for (j = 0; j < num_loops; j++) {
@@ -511,7 +580,7 @@ int main(int argc, char **argv)
ret = poll(&pfd, 1, -1);
if (ret < 0) {
ret = -errno;
- goto error_close_buffer_access;
+ goto error;
} else if (ret == 0) {
continue;
}
@@ -536,45 +605,20 @@ int main(int argc, char **argv)
num_channels);
}
- /* Stop the buffer */
- ret = write_sysfs_int("enable", buf_dir_name, 0);
- if (ret < 0)
- goto error_close_buffer_access;
-
- if (!notrigger)
- /* Disconnect the trigger - just write a dummy name. */
- ret = write_sysfs_string("trigger/current_trigger",
- dev_dir_name, "NULL");
- if (ret < 0)
- fprintf(stderr, "Failed to write to %s\n",
- dev_dir_name);
+error:
+ cleanup();
-error_close_buffer_access:
- if (close(fp) == -1)
+ if (fp >= 0 && close(fp) == -1)
perror("Failed to close buffer");
-
-error_free_buffer_access:
free(buffer_access);
-error_free_data:
free(data);
-error_free_buf_dir_name:
free(buf_dir_name);
-error_free_channels:
for (i = num_channels - 1; i >= 0; i--) {
free(channels[i].name);
free(channels[i].generic_name);
}
free(channels);
-error_free_triggername:
- if (datardytrigger)
- free(trigger_name);
-error_disable_channels:
- if (autochannels == AUTOCHANNELS_ACTIVE) {
- ret = enable_disable_all_channels(dev_dir_name, 0);
- if (ret)
- fprintf(stderr, "Failed to disable all channels\n");
- }
-error_free_dev_dir_name:
+ free(trigger_name);
free(dev_dir_name);
return ret;
--
2.5.5
[toc] | [next] | [standalone]
| From | Jonathan Cameron <jic23@kernel.org> |
|---|---|
| Date | 2016-05-29 21:40 +0200 |
| Message-ID | <rEeJ3-20W-17@gated-at.bofh.it> |
| In reply to | #1405576 |
On 23/05/16 19:39, Crestez Dan Leonard wrote:
> This will clean (disable buffer/trigger/channels) when doing
> something like a CTRL-C. Otherwise restarting generic_buffer requires a
> manual echo 0 > buffer/enable
>
> This also cleanup up all the code freeing string buffers at
> the end of main. We initialize all pointers to NULL so that cleanup can
> all be done under a single error label.
>
> Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Dropped v2 and applied this one with the same name mangling to match new
naming as iio_generic_buffer
Thanks,
Jonathan
> ---
> Changes since v2: Initialize data to NULL to prevent crash on free.
>
> tools/iio/generic_buffer.c | 172 ++++++++++++++++++++++++++++-----------------
> 1 file changed, 108 insertions(+), 64 deletions(-)
>
> diff --git a/tools/iio/generic_buffer.c b/tools/iio/generic_buffer.c
> index 2429c78..972f400 100644
> --- a/tools/iio/generic_buffer.c
> +++ b/tools/iio/generic_buffer.c
> @@ -32,6 +32,8 @@
> #include <endian.h>
> #include <getopt.h>
> #include <inttypes.h>
> +#include <stdbool.h>
> +#include <signal.h>
> #include "iio_utils.h"
>
> /**
> @@ -254,6 +256,65 @@ void print_usage(void)
> " -w <n> Set delay between reads in us (event-less mode)\n");
> }
>
> +enum autochan autochannels = AUTOCHANNELS_DISABLED;
> +char *dev_dir_name = NULL;
> +char *buf_dir_name = NULL;
> +bool current_trigger_set = false;
> +
> +void cleanup(void)
> +{
> + int ret;
> +
> + /* Disable trigger */
> + if (dev_dir_name && current_trigger_set) {
> + /* Disconnect the trigger - just write a dummy name. */
> + ret = write_sysfs_string("trigger/current_trigger",
> + dev_dir_name, "NULL");
> + if (ret < 0)
> + fprintf(stderr, "Failed to disable trigger: %s\n",
> + strerror(-ret));
> + current_trigger_set = false;
> + }
> +
> + /* Disable buffer */
> + if (buf_dir_name) {
> + ret = write_sysfs_int("enable", buf_dir_name, 0);
> + if (ret < 0)
> + fprintf(stderr, "Failed to disable buffer: %s\n",
> + strerror(-ret));
> + }
> +
> + /* Disable channels if auto-enabled */
> + if (dev_dir_name && autochannels == AUTOCHANNELS_ACTIVE) {
> + ret = enable_disable_all_channels(dev_dir_name, 0);
> + if (ret)
> + fprintf(stderr, "Failed to disable all channels\n");
> + autochannels = AUTOCHANNELS_DISABLED;
> + }
> +}
> +
> +void sig_handler(int signum)
> +{
> + fprintf(stderr, "Caught signal %d\n", signum);
> + cleanup();
> + exit(-signum);
> +}
> +
> +void register_cleanup(void)
> +{
> + struct sigaction sa = { .sa_handler = sig_handler };
> + const int signums[] = { SIGINT, SIGTERM, SIGABRT };
> + int ret, i;
> +
> + for (i = 0; i < ARRAY_SIZE(signums); ++i) {
> + ret = sigaction(signums[i], &sa, NULL);
> + if (ret) {
> + perror("Failed to register signal handler");
> + exit(-1);
> + }
> + }
> +}
> +
> int main(int argc, char **argv)
> {
> unsigned long num_loops = 2;
> @@ -261,25 +322,24 @@ int main(int argc, char **argv)
> unsigned long buf_len = 128;
>
> int ret, c, i, j, toread;
> - int fp;
> + int fp = -1;
>
> - int num_channels;
> + int num_channels = 0;
> char *trigger_name = NULL, *device_name = NULL;
> - char *dev_dir_name, *buf_dir_name;
>
> - int datardytrigger = 1;
> - char *data;
> + char *data = NULL;
> ssize_t read_size;
> int dev_num, trig_num;
> - char *buffer_access;
> + char *buffer_access = NULL;
> int scan_size;
> int noevents = 0;
> int notrigger = 0;
> - enum autochan autochannels = AUTOCHANNELS_DISABLED;
> char *dummy;
>
> struct iio_channel_info *channels;
>
> + register_cleanup();
> +
> while ((c = getopt(argc, argv, "ac:egl:n:t:w:")) != -1) {
> switch (c) {
> case 'a':
> @@ -288,8 +348,10 @@ int main(int argc, char **argv)
> case 'c':
> errno = 0;
> num_loops = strtoul(optarg, &dummy, 10);
> - if (errno)
> - return -errno;
> + if (errno) {
> + ret = -errno;
> + goto error;
> + }
>
> break;
> case 'e':
> @@ -301,26 +363,30 @@ int main(int argc, char **argv)
> case 'l':
> errno = 0;
> buf_len = strtoul(optarg, &dummy, 10);
> - if (errno)
> - return -errno;
> + if (errno) {
> + ret = -errno;
> + goto error;
> + }
>
> break;
> case 'n':
> device_name = optarg;
> break;
> case 't':
> - trigger_name = optarg;
> - datardytrigger = 0;
> + trigger_name = strdup(optarg);
> break;
> case 'w':
> errno = 0;
> timedelay = strtoul(optarg, &dummy, 10);
> - if (errno)
> - return -errno;
> + if (errno) {
> + ret = -errno;
> + goto error;
> + }
> break;
> case '?':
> print_usage();
> - return -1;
> + ret = -1;
> + goto error;
> }
> }
>
> @@ -334,14 +400,17 @@ int main(int argc, char **argv)
> dev_num = find_type_by_name(device_name, "iio:device");
> if (dev_num < 0) {
> fprintf(stderr, "Failed to find the %s\n", device_name);
> - return dev_num;
> + ret = dev_num;
> + goto error;
> }
>
> printf("iio device number being used is %d\n", dev_num);
>
> ret = asprintf(&dev_dir_name, "%siio:device%d", iio_dir, dev_num);
> - if (ret < 0)
> - return -ENOMEM;
> + if (ret < 0) {
> + ret = -ENOMEM;
> + goto error;
> + }
>
> if (!notrigger) {
> if (!trigger_name) {
> @@ -354,7 +423,7 @@ int main(int argc, char **argv)
> "%s-dev%d", device_name, dev_num);
> if (ret < 0) {
> ret = -ENOMEM;
> - goto error_free_dev_dir_name;
> + goto error;
> }
> }
>
> @@ -367,7 +436,7 @@ int main(int argc, char **argv)
> "%s-trigger", device_name);
> if (ret < 0) {
> ret = -ENOMEM;
> - goto error_free_dev_dir_name;
> + goto error;
> }
> }
>
> @@ -376,7 +445,7 @@ int main(int argc, char **argv)
> fprintf(stderr, "Failed to find the trigger %s\n",
> trigger_name);
> ret = trig_num;
> - goto error_free_triggername;
> + goto error;
> }
>
> printf("iio trigger number being used is %d\n", trig_num);
> @@ -392,7 +461,7 @@ int main(int argc, char **argv)
> if (ret) {
> fprintf(stderr, "Problem reading scan element information\n"
> "diag %s\n", dev_dir_name);
> - goto error_free_triggername;
> + goto error;
> }
> if (num_channels && autochannels == AUTOCHANNELS_ENABLED) {
> fprintf(stderr, "Auto-channels selected but some channels "
> @@ -407,7 +476,7 @@ int main(int argc, char **argv)
> ret = enable_disable_all_channels(dev_dir_name, 1);
> if (ret) {
> fprintf(stderr, "Failed to enable all channels\n");
> - goto error_free_triggername;
> + goto error;
> }
>
> /* This flags that we need to disable the channels again */
> @@ -419,12 +488,12 @@ int main(int argc, char **argv)
> fprintf(stderr, "Problem reading scan element "
> "information\n"
> "diag %s\n", dev_dir_name);
> - goto error_disable_channels;
> + goto error;
> }
> if (!num_channels) {
> fprintf(stderr, "Still no channels after "
> "auto-enabling, giving up\n");
> - goto error_disable_channels;
> + goto error;
> }
> }
>
> @@ -436,7 +505,7 @@ int main(int argc, char **argv)
> "/*_en or pass -a to autoenable channels and "
> "try again.\n", dev_dir_name);
> ret = -ENOENT;
> - goto error_free_triggername;
> + goto error;
> }
>
> /*
> @@ -448,7 +517,7 @@ int main(int argc, char **argv)
> "%siio:device%d/buffer", iio_dir, dev_num);
> if (ret < 0) {
> ret = -ENOMEM;
> - goto error_free_channels;
> + goto error;
> }
>
> if (!notrigger) {
> @@ -463,34 +532,34 @@ int main(int argc, char **argv)
> if (ret < 0) {
> fprintf(stderr,
> "Failed to write current_trigger file\n");
> - goto error_free_buf_dir_name;
> + goto error;
> }
> }
>
> /* Setup ring buffer parameters */
> ret = write_sysfs_int("length", buf_dir_name, buf_len);
> if (ret < 0)
> - goto error_free_buf_dir_name;
> + goto error;
>
> /* Enable the buffer */
> ret = write_sysfs_int("enable", buf_dir_name, 1);
> if (ret < 0) {
> fprintf(stderr,
> "Failed to enable buffer: %s\n", strerror(-ret));
> - goto error_free_buf_dir_name;
> + goto error;
> }
>
> scan_size = size_from_channelarray(channels, num_channels);
> data = malloc(scan_size * buf_len);
> if (!data) {
> ret = -ENOMEM;
> - goto error_free_buf_dir_name;
> + goto error;
> }
>
> ret = asprintf(&buffer_access, "/dev/iio:device%d", dev_num);
> if (ret < 0) {
> ret = -ENOMEM;
> - goto error_free_data;
> + goto error;
> }
>
> /* Attempt to open non blocking the access dev */
> @@ -498,7 +567,7 @@ int main(int argc, char **argv)
> if (fp == -1) { /* TODO: If it isn't there make the node */
> ret = -errno;
> fprintf(stderr, "Failed to open %s\n", buffer_access);
> - goto error_free_buffer_access;
> + goto error;
> }
>
> for (j = 0; j < num_loops; j++) {
> @@ -511,7 +580,7 @@ int main(int argc, char **argv)
> ret = poll(&pfd, 1, -1);
> if (ret < 0) {
> ret = -errno;
> - goto error_close_buffer_access;
> + goto error;
> } else if (ret == 0) {
> continue;
> }
> @@ -536,45 +605,20 @@ int main(int argc, char **argv)
> num_channels);
> }
>
> - /* Stop the buffer */
> - ret = write_sysfs_int("enable", buf_dir_name, 0);
> - if (ret < 0)
> - goto error_close_buffer_access;
> -
> - if (!notrigger)
> - /* Disconnect the trigger - just write a dummy name. */
> - ret = write_sysfs_string("trigger/current_trigger",
> - dev_dir_name, "NULL");
> - if (ret < 0)
> - fprintf(stderr, "Failed to write to %s\n",
> - dev_dir_name);
> +error:
> + cleanup();
>
> -error_close_buffer_access:
> - if (close(fp) == -1)
> + if (fp >= 0 && close(fp) == -1)
> perror("Failed to close buffer");
> -
> -error_free_buffer_access:
> free(buffer_access);
> -error_free_data:
> free(data);
> -error_free_buf_dir_name:
> free(buf_dir_name);
> -error_free_channels:
> for (i = num_channels - 1; i >= 0; i--) {
> free(channels[i].name);
> free(channels[i].generic_name);
> }
> free(channels);
> -error_free_triggername:
> - if (datardytrigger)
> - free(trigger_name);
> -error_disable_channels:
> - if (autochannels == AUTOCHANNELS_ACTIVE) {
> - ret = enable_disable_all_channels(dev_dir_name, 0);
> - if (ret)
> - fprintf(stderr, "Failed to disable all channels\n");
> - }
> -error_free_dev_dir_name:
> + free(trigger_name);
> free(dev_dir_name);
>
> return ret;
>
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web