Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1404378 > unrolled thread
| Started by | Laxman Dewangan <ldewangan@nvidia.com> |
|---|---|
| First post | 2016-05-20 14:20 +0200 |
| Last post | 2016-05-20 14:20 +0200 |
| Articles | 7 — 2 participants |
Back to article view | Back to linux.kernel
[PATCH V6 0/3] soc/tegra: Add support for IO pads power and voltage control Laxman Dewangan <ldewangan@nvidia.com> - 2016-05-20 14:20 +0200
[PATCH V6 3/3] soc/tegra: pmc: Add support for IO pads power state and voltage Laxman Dewangan <ldewangan@nvidia.com> - 2016-05-20 14:20 +0200
Re: [PATCH V6 3/3] soc/tegra: pmc: Add support for IO pads power state and voltage Jon Hunter <jonathanh@nvidia.com> - 2016-05-20 15:40 +0200
Re: [PATCH V6 3/3] soc/tegra: pmc: Add support for IO pads power state and voltage Laxman Dewangan <ldewangan@nvidia.com> - 2016-05-20 15:50 +0200
Re: [PATCH V6 3/3] soc/tegra: pmc: Add support for IO pads power state and voltage Jon Hunter <jonathanh@nvidia.com> - 2016-05-20 16:10 +0200
Re: [PATCH V6 3/3] soc/tegra: pmc: Add support for IO pads power state and voltage Jon Hunter <jonathanh@nvidia.com> - 2016-05-20 16:20 +0200
[PATCH V6 2/3] soc/tegra: pmc: Correct type of variable for tegra_pmc_readl() Laxman Dewangan <ldewangan@nvidia.com> - 2016-05-20 14:20 +0200
| From | Laxman Dewangan <ldewangan@nvidia.com> |
|---|---|
| Date | 2016-05-20 14:20 +0200 |
| Subject | [PATCH V6 0/3] soc/tegra: Add support for IO pads power and voltage control |
| Message-ID | <rARzk-5nH-11@gated-at.bofh.it> |
The IO pins of Tegra SoCs are grouped for common control of IO interface
like setting voltage signal levels and power state of the interface. The
group is generally referred as IO pads. The power state and voltage control
of IO pins can be done at IO pads level.
Tegra124 onwards IO pads support the power down state when system is
active. The voltage levels on IO pads are auto detected on Tegra124/
Tegra132 but it is not in Tegra210. For Tegra210, the SW need to
explicitly configure the voltage levels of IO pads
This series add the interface for the IO pad power state and voltage
configurations. Modifies the client to use new APIs.
Register the child devices to provide the client interface to configure
IO pads power state and voltage from Device tree.
---
Changes from V2:
- Drop the pinctrl driver from series till pmc interfce is finalise.
- Move client to use the new APIs.
- Remove older APIs to configure IO rail and related macros.
Changes from V3:
- keep value to be unsigned long in the dpd_prepare.
- Make all pad_id/io_pad_id to id.
- tegra_io_pad_ -> tegra_io_pads
- dpd_bit -> bit, pwr_mask/bit to mask/bit.
- Rename function to tegra_io_pads_{set,get}_voltage_config
- Make the io pad tables common for all SoC.
- Make io_pads enums.
- Add enums for voltage.
- Drop patch of adding sub devs
Changes from V4:
- Change IO_PAD to IO_PADS.
- Change enum for voltage config
Changes from V5:
- FIx multiline comment.
- Use -EINVAL instead of -1 for nonsupported case and refactor APIs to
convert io-pads to bit.
Laxman Dewangan (3):
soc/tegra: pmc: Use BIT macro for register field definition
soc/tegra: pmc: Correct type of variable for tegra_pmc_readl()
soc/tegra: pmc: Add support for IO pads power state and voltage
drivers/gpu/drm/tegra/sor.c | 8 +-
drivers/soc/tegra/pmc.c | 273 +++++++++++++++++++++++++++++++++++---------
include/soc/tegra/pmc.h | 132 +++++++++++++++------
3 files changed, 321 insertions(+), 92 deletions(-)
--
2.1.4
[toc] | [next] | [standalone]
| From | Laxman Dewangan <ldewangan@nvidia.com> |
|---|---|
| Date | 2016-05-20 14:20 +0200 |
| Subject | [PATCH V6 3/3] soc/tegra: pmc: Add support for IO pads power state and voltage |
| Message-ID | <rARzk-5nH-23@gated-at.bofh.it> |
| In reply to | #1404378 |
The IO pins of Tegra SoCs are grouped for common control of IO
interface like setting voltage signal levels and power state of
the interface. The group is generally referred as IO pads. The
power state and voltage control of IO pins can be done at IO pads
level.
Tegra generation SoC supports the power down of IO pads when it
is not used even in the active state of system. This saves power
from that IO interface. Also it supports multiple voltage level
in IO pins for interfacing on some of pads. The IO pad voltage is
automatically detected till T124, hence SW need not to configure
this. But from T210, the automatically detection logic has been
removed, hence SW need to explicitly set the IO pad voltage into
IO pad configuration registers.
Add support to set the power states and voltage level of the IO pads
from client driver. The implementation for the APIs are in generic
which is applicable for all generation os Tegra SoC.
IO pads ID and information of bit field for power state and voltage
level controls are added for Tegra124, Tegra132 and Tegra210. The SOR
driver is modified to use the new APIs.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
Changes from V1:
This is reworked on earlier path to have separation between IO rails and
io pads and add power state and voltage control APIs in single call.
Changes from V2:
- Remove the tegra_io_rail_power_off/on() apis and change client (sor) driver
to use the new APIs for IO pad power.
- Remove the TEGRA_IO_RAIL_ macros.
Changes from V3:
- Make all pad_id/io_pad_id to id.
- tegra_io_pad_ -> tegra_io_pads
- dpd_bit -> bit, pwr_mask/bit to mask/bit.
- Rename function to tegra_io_pads_{set,get}_voltage_config
- Make the io pad tables common for all SoC.
- Make io_pads enums.
- Add enums for voltage.
Changes from V4:
- IO_PAD->IO_PADS
- TEGRA_IO_PADS_POWER_SOURCE_ -> TEGRA_IO_PADS_VCONF_
Changes from V5:
- Fix comment style to multi-line format.
- Use -EINVAL instead of -1 to refactor some of function as suggested by Jon.
---
drivers/gpu/drm/tegra/sor.c | 8 +-
drivers/soc/tegra/pmc.c | 221 ++++++++++++++++++++++++++++++++++++++------
include/soc/tegra/pmc.h | 133 ++++++++++++++++++--------
3 files changed, 295 insertions(+), 67 deletions(-)
diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c
index 757c6e8..3ce547a 100644
--- a/drivers/gpu/drm/tegra/sor.c
+++ b/drivers/gpu/drm/tegra/sor.c
@@ -1134,7 +1134,7 @@ static void tegra_sor_edp_disable(struct drm_encoder *encoder)
dev_err(sor->dev, "failed to disable DP: %d\n", err);
}
- err = tegra_io_rail_power_off(TEGRA_IO_RAIL_LVDS);
+ err = tegra_io_pads_power_disable(TEGRA_IO_PADS_LVDS);
if (err < 0)
dev_err(sor->dev, "failed to power off I/O rail: %d\n", err);
@@ -1296,7 +1296,7 @@ static void tegra_sor_edp_enable(struct drm_encoder *encoder)
tegra_sor_writel(sor, value, SOR_DP_PADCTL0);
/* step 2 */
- err = tegra_io_rail_power_on(TEGRA_IO_RAIL_LVDS);
+ err = tegra_io_pads_power_enable(TEGRA_IO_PADS_LVDS);
if (err < 0)
dev_err(sor->dev, "failed to power on I/O rail: %d\n", err);
@@ -1748,7 +1748,7 @@ static void tegra_sor_hdmi_disable(struct drm_encoder *encoder)
if (err < 0)
dev_err(sor->dev, "failed to power down SOR: %d\n", err);
- err = tegra_io_rail_power_off(TEGRA_IO_RAIL_HDMI);
+ err = tegra_io_pads_power_disable(TEGRA_IO_PADS_HDMI);
if (err < 0)
dev_err(sor->dev, "failed to power off HDMI rail: %d\n", err);
@@ -1787,7 +1787,7 @@ static void tegra_sor_hdmi_enable(struct drm_encoder *encoder)
div = clk_get_rate(sor->clk) / 1000000 * 4;
- err = tegra_io_rail_power_on(TEGRA_IO_RAIL_HDMI);
+ err = tegra_io_pads_power_enable(TEGRA_IO_PADS_HDMI);
if (err < 0)
dev_err(sor->dev, "failed to power on HDMI rail: %d\n", err);
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 09c2b97..eb51a09 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -76,6 +76,10 @@
#define PMC_SCRATCH41 0x140
+/* Power detect for pad voltage */
+#define PMC_PWR_DET 0x48
+#define PMC_PWR_DET_VAL 0xe4
+
#define PMC_SENSOR_CTRL 0x1b0
#define PMC_SENSOR_CTRL_SCRATCH_WRITE BIT(2)
#define PMC_SENSOR_CTRL_ENABLE_RST BIT(1)
@@ -105,6 +109,15 @@
#define GPU_RG_CNTRL 0x2d4
+/*
+ * Define the IO_PADS SOC for SOC mask to find out that IO pads supported
+ * or not in given SoC.
+ */
+#define TEGRA_IO_PADS_T124 0x1
+#define TEGRA_IO_PADS_T210 0x2
+#define TEGRA_IO_PADS_T124_T210 (TEGRA_IO_PADS_T124 | \
+ TEGRA_IO_PADS_T210)
+
struct tegra_powergate {
struct generic_pm_domain genpd;
struct tegra_pmc *pmc;
@@ -115,12 +128,23 @@ struct tegra_powergate {
unsigned int num_resets;
};
+/* tegra_io_pads_config_info: Tegra IO pads bit config info.
+ * @dpd_config_bit: DPD configuration bit position. -1 if not supported.
+ * @voltage_config_bit: Voltage configuration bit position. -1 if not supported.
+ * @soc_mask: Bitwise OR of SoC masks if IO pads supported on that SoC.
+ */
+struct tegra_io_pads_config_info {
+ int dpd_config_bit;
+ int voltage_config_bit;
+ int soc_mask;
+};
+
struct tegra_pmc_soc {
unsigned int num_powergates;
const char *const *powergates;
unsigned int num_cpu_powergates;
const u8 *cpu_powergates;
-
+ int io_pads_soc_mask;
bool has_tsense_reset;
bool has_gpu_clamps;
};
@@ -196,6 +220,14 @@ static void tegra_pmc_writel(u32 value, unsigned long offset)
writel(value, pmc->base + offset);
}
+static void tegra_pmc_rmw(unsigned long offset, u32 mask, u32 val)
+{
+ u32 pmc_reg = tegra_pmc_readl(offset);
+
+ pmc_reg = (pmc_reg & ~mask) | (val & mask);
+ tegra_pmc_writel(pmc_reg, offset);
+}
+
static inline bool tegra_powergate_state(int id)
{
if (id == TEGRA_POWERGATE_3D && pmc->soc->has_gpu_clamps)
@@ -841,21 +873,98 @@ static void tegra_powergate_init(struct tegra_pmc *pmc)
of_node_put(np);
}
-static int tegra_io_rail_prepare(unsigned int id, unsigned long *request,
- unsigned long *status, unsigned int *bit)
+#define TEGRA_IO_PADS_CONFIG(_id, _dpd, _volt, _soc) \
+[TEGRA_IO_PADS_##_id] = { \
+ .dpd_config_bit = (_dpd), \
+ .voltage_config_bit = (_volt), \
+ .soc_mask = (_soc), \
+}
+
+static struct tegra_io_pads_config_info
+tegra_io_pads_configs[TEGRA_IO_PADS_MAX] = {
+ TEGRA_IO_PADS_CONFIG(CSIA, 0, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(CSIB, 1, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(DSI, 2, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(MIPI_BIAS, 3, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(PEX_BIAS, 4, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(PEX_CLK1, 5, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(PEX_CLK2, 6, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(USB0, 9, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(USB1, 10, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(USB2, 11, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(USB_BIAS, 12, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(NAND, 13, -EINVAL, TEGRA_IO_PADS_T124),
+ TEGRA_IO_PADS_CONFIG(UART, 14, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(BB, 15, -EINVAL, TEGRA_IO_PADS_T124),
+ TEGRA_IO_PADS_CONFIG(AUDIO, 17, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(USB3, 18, -EINVAL, TEGRA_IO_PADS_T210),
+ TEGRA_IO_PADS_CONFIG(HSIC, 19, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(COMP, 22, -EINVAL, TEGRA_IO_PADS_T124),
+ TEGRA_IO_PADS_CONFIG(DBG, 25, -EINVAL, TEGRA_IO_PADS_T210),
+ TEGRA_IO_PADS_CONFIG(DEBUG_NONAO, 26, -EINVAL, TEGRA_IO_PADS_T210),
+ TEGRA_IO_PADS_CONFIG(GPIO, 27, 21, TEGRA_IO_PADS_T210),
+ TEGRA_IO_PADS_CONFIG(HDMI, 28, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(PEX_CNTRL, 32, -EINVAL, TEGRA_IO_PADS_T124),
+ TEGRA_IO_PADS_CONFIG(SDMMC1, 33, 12, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(SDMMC3, 34, 13, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(SDMMC4, 35, -EINVAL, TEGRA_IO_PADS_T124),
+ TEGRA_IO_PADS_CONFIG(EMMC, 35, -EINVAL, TEGRA_IO_PADS_T210),
+ TEGRA_IO_PADS_CONFIG(CAM, 36, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(EMMC2, 37, -EINVAL, TEGRA_IO_PADS_T210),
+ TEGRA_IO_PADS_CONFIG(HV, 38, -EINVAL, TEGRA_IO_PADS_T124),
+ TEGRA_IO_PADS_CONFIG(DSIB, 39, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(DSIC, 40, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(DSID, 41, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(CSIC, 42, -EINVAL, TEGRA_IO_PADS_T210),
+ TEGRA_IO_PADS_CONFIG(CSID, 43, -EINVAL, TEGRA_IO_PADS_T210),
+ TEGRA_IO_PADS_CONFIG(CSIE, 44, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(CSIF, 45, -EINVAL, TEGRA_IO_PADS_T210),
+ TEGRA_IO_PADS_CONFIG(SPI, 46, -EINVAL, TEGRA_IO_PADS_T210),
+ TEGRA_IO_PADS_CONFIG(SPI_HV, 47, 23, TEGRA_IO_PADS_T210),
+ TEGRA_IO_PADS_CONFIG(DMIC, 50, -EINVAL, TEGRA_IO_PADS_T210),
+ TEGRA_IO_PADS_CONFIG(DP, 51, -EINVAL, TEGRA_IO_PADS_T210),
+ TEGRA_IO_PADS_CONFIG(LVDS, 57, -EINVAL, TEGRA_IO_PADS_T124_T210),
+ TEGRA_IO_PADS_CONFIG(SYS_DDC, 58, -EINVAL, TEGRA_IO_PADS_T124),
+ TEGRA_IO_PADS_CONFIG(AUDIO_HV, 61, 18, TEGRA_IO_PADS_T210),
+};
+
+static inline int tegra_io_pads_to_dpd_bit(const struct tegra_pmc_soc *soc,
+ enum tegra_io_pads id)
{
- unsigned long rate, value;
+ if (tegra_io_pads_configs[id].soc_mask & soc->io_pads_soc_mask)
+ return tegra_io_pads_configs[id].dpd_config_bit;
- *bit = id % 32;
+ return -EINVAL;
+}
- /*
- * There are two sets of 30 bits to select IO rails, but bits 30 and
- * 31 are control bits rather than IO rail selection bits.
- */
- if (id > 63 || *bit == 30 || *bit == 31)
+static int tegra_io_pads_to_voltage_bit(const struct tegra_pmc_soc *soc,
+ enum tegra_io_pads id)
+{
+ /* T210 only supports io-pad voltage config bit */
+ if (soc->io_pads_soc_mask != TEGRA_IO_PADS_T210)
return -EINVAL;
- if (id < 32) {
+ if (tegra_io_pads_configs[id].soc_mask & soc->io_pads_soc_mask)
+ return tegra_io_pads_configs[id].voltage_config_bit;
+
+ return -EINVAL;
+}
+
+static int tegra_io_pads_dpd_prepare(enum tegra_io_pads id,
+ unsigned long *request,
+ unsigned long *status,
+ unsigned int *bit)
+{
+ unsigned long rate, value;
+ int ret;
+
+ ret = tegra_io_pads_to_dpd_bit(pmc->soc, id);
+ if (ret < 0)
+ return ret;
+
+ *bit = ret % 32;
+
+ if (*bit < 32) {
*status = IO_DPD_STATUS;
*request = IO_DPD_REQ;
} else {
@@ -875,8 +984,8 @@ static int tegra_io_rail_prepare(unsigned int id, unsigned long *request,
return 0;
}
-static int tegra_io_rail_poll(unsigned long offset, u32 mask,
- u32 val, unsigned long timeout)
+static int tegra_io_pads_dpd_poll(unsigned long offset, u32 mask,
+ u32 val, unsigned long timeout)
{
u32 value;
@@ -893,12 +1002,12 @@ static int tegra_io_rail_poll(unsigned long offset, u32 mask,
return -ETIMEDOUT;
}
-static void tegra_io_rail_unprepare(void)
+static void tegra_io_pads_dpd_unprepare(void)
{
tegra_pmc_writel(DPD_SAMPLE_DISABLE, DPD_SAMPLE);
}
-int tegra_io_rail_power_on(unsigned int id)
+int tegra_io_pads_power_enable(enum tegra_io_pads id)
{
unsigned long request, status;
unsigned int bit;
@@ -907,7 +1016,7 @@ int tegra_io_rail_power_on(unsigned int id)
mutex_lock(&pmc->powergates_lock);
- err = tegra_io_rail_prepare(id, &request, &status, &bit);
+ err = tegra_io_pads_dpd_prepare(id, &request, &status, &bit);
if (err)
goto error;
@@ -919,22 +1028,22 @@ int tegra_io_rail_power_on(unsigned int id)
value |= IO_DPD_REQ_CODE_OFF;
tegra_pmc_writel(value, request);
- err = tegra_io_rail_poll(status, mask, 0, 250);
+ err = tegra_io_pads_dpd_poll(status, mask, 0, 250);
if (err) {
- pr_info("tegra_io_rail_poll() failed: %d\n", err);
+ pr_info("tegra_io_pads_dpd_poll() failed: %d\n", err);
goto error;
}
- tegra_io_rail_unprepare();
+ tegra_io_pads_dpd_unprepare();
error:
mutex_unlock(&pmc->powergates_lock);
return err;
}
-EXPORT_SYMBOL(tegra_io_rail_power_on);
+EXPORT_SYMBOL(tegra_io_pads_power_enable);
-int tegra_io_rail_power_off(unsigned int id)
+int tegra_io_pads_power_disable(enum tegra_io_pads id)
{
unsigned long request, status;
unsigned int bit;
@@ -943,9 +1052,9 @@ int tegra_io_rail_power_off(unsigned int id)
mutex_lock(&pmc->powergates_lock);
- err = tegra_io_rail_prepare(id, &request, &status, &bit);
+ err = tegra_io_pads_dpd_prepare(id, &request, &status, &bit);
if (err) {
- pr_info("tegra_io_rail_prepare() failed: %d\n", err);
+ pr_info("tegra_io_pads_dpd_prepare() failed: %d\n", err);
goto error;
}
@@ -957,18 +1066,76 @@ int tegra_io_rail_power_off(unsigned int id)
value |= IO_DPD_REQ_CODE_ON;
tegra_pmc_writel(value, request);
- err = tegra_io_rail_poll(status, mask, mask, 250);
+ err = tegra_io_pads_dpd_poll(status, mask, mask, 250);
if (err)
goto error;
- tegra_io_rail_unprepare();
+ tegra_io_pads_dpd_unprepare();
error:
mutex_unlock(&pmc->powergates_lock);
return err;
}
-EXPORT_SYMBOL(tegra_io_rail_power_off);
+EXPORT_SYMBOL(tegra_io_pads_power_disable);
+
+int tegra_io_pads_power_is_enabled(enum tegra_io_pads id)
+{
+ unsigned long status_reg;
+ u32 status;
+ int bit;
+
+ bit = tegra_io_pads_to_dpd_bit(pmc->soc, id);
+ if (bit < 0)
+ return bit;
+
+ status_reg = (bit < 32) ? IO_DPD_STATUS : IO_DPD2_STATUS;
+ status = tegra_pmc_readl(status_reg);
+
+ return !!(status & BIT(bit % 32));
+}
+EXPORT_SYMBOL(tegra_io_pads_power_is_enabled);
+
+int tegra_io_pads_set_voltage_config(enum tegra_io_pads id,
+ enum tegra_io_pads_vconf_voltage rail_uv)
+{
+ int bit;
+ u32 mask;
+ u32 bval;
+
+ bit = tegra_io_pads_to_voltage_bit(pmc->soc, id);
+ if (bit < 0)
+ return bit;
+
+ mask = BIT(bit);
+ bval = (rail_uv == TEGRA_IO_PADS_VCONF_3300000UV) ? mask : 0;
+
+ mutex_lock(&pmc->powergates_lock);
+ tegra_pmc_rmw(PMC_PWR_DET, mask, mask);
+ tegra_pmc_rmw(PMC_PWR_DET_VAL, mask, bval);
+ mutex_unlock(&pmc->powergates_lock);
+
+ usleep_range(100, 250);
+
+ return 0;
+}
+EXPORT_SYMBOL(tegra_io_pads_set_voltage_config);
+
+int tegra_io_pads_get_voltage_config(enum tegra_io_pads id)
+{
+ int bit;
+ u32 val;
+
+ bit = tegra_io_pads_to_voltage_bit(pmc->soc, id);
+ if (bit < 0)
+ return bit;
+
+ val = tegra_pmc_readl(PMC_PWR_DET_VAL);
+
+ return (val & BIT(bit)) ? TEGRA_IO_PADS_VCONF_3300000UV :
+ TEGRA_IO_PADS_VCONF_1800000UV;
+}
+EXPORT_SYMBOL(tegra_io_pads_get_voltage_config);
#ifdef CONFIG_PM_SLEEP
enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void)
@@ -1400,6 +1567,7 @@ static const struct tegra_pmc_soc tegra124_pmc_soc = {
.powergates = tegra124_powergates,
.num_cpu_powergates = ARRAY_SIZE(tegra124_cpu_powergates),
.cpu_powergates = tegra124_cpu_powergates,
+ .io_pads_soc_mask = TEGRA_IO_PADS_T124,
.has_tsense_reset = true,
.has_gpu_clamps = true,
};
@@ -1443,6 +1611,7 @@ static const struct tegra_pmc_soc tegra210_pmc_soc = {
.powergates = tegra210_powergates,
.num_cpu_powergates = ARRAY_SIZE(tegra210_cpu_powergates),
.cpu_powergates = tegra210_cpu_powergates,
+ .io_pads_soc_mask = TEGRA_IO_PADS_T210,
.has_tsense_reset = true,
.has_gpu_clamps = true,
};
diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h
index e9e5347..7b547bc 100644
--- a/include/soc/tegra/pmc.h
+++ b/include/soc/tegra/pmc.h
@@ -76,37 +76,71 @@ int tegra_pmc_cpu_remove_clamping(unsigned int cpuid);
#define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D
-#define TEGRA_IO_RAIL_CSIA 0
-#define TEGRA_IO_RAIL_CSIB 1
-#define TEGRA_IO_RAIL_DSI 2
-#define TEGRA_IO_RAIL_MIPI_BIAS 3
-#define TEGRA_IO_RAIL_PEX_BIAS 4
-#define TEGRA_IO_RAIL_PEX_CLK1 5
-#define TEGRA_IO_RAIL_PEX_CLK2 6
-#define TEGRA_IO_RAIL_USB0 9
-#define TEGRA_IO_RAIL_USB1 10
-#define TEGRA_IO_RAIL_USB2 11
-#define TEGRA_IO_RAIL_USB_BIAS 12
-#define TEGRA_IO_RAIL_NAND 13
-#define TEGRA_IO_RAIL_UART 14
-#define TEGRA_IO_RAIL_BB 15
-#define TEGRA_IO_RAIL_AUDIO 17
-#define TEGRA_IO_RAIL_HSIC 19
-#define TEGRA_IO_RAIL_COMP 22
-#define TEGRA_IO_RAIL_HDMI 28
-#define TEGRA_IO_RAIL_PEX_CNTRL 32
-#define TEGRA_IO_RAIL_SDMMC1 33
-#define TEGRA_IO_RAIL_SDMMC3 34
-#define TEGRA_IO_RAIL_SDMMC4 35
-#define TEGRA_IO_RAIL_CAM 36
-#define TEGRA_IO_RAIL_RES 37
-#define TEGRA_IO_RAIL_HV 38
-#define TEGRA_IO_RAIL_DSIB 39
-#define TEGRA_IO_RAIL_DSIC 40
-#define TEGRA_IO_RAIL_DSID 41
-#define TEGRA_IO_RAIL_CSIE 44
-#define TEGRA_IO_RAIL_LVDS 57
-#define TEGRA_IO_RAIL_SYS_DDC 58
+/*
+ * TEGRA_IO_PAD: The IO pins of Tegra SoCs are grouped for common control
+ * of IO interface like setting voltage signal levels, power state of the
+ * interface. The group is generally referred as io-pads. The power and
+ * voltage control of IO pins are available at io-pads level.
+ * The following macros make the super list all IO pads found on Tegra SoC
+ * generations.
+ */
+enum tegra_io_pads {
+ TEGRA_IO_PADS_AUDIO,
+ TEGRA_IO_PADS_AUDIO_HV,
+ TEGRA_IO_PADS_BB,
+ TEGRA_IO_PADS_CAM,
+ TEGRA_IO_PADS_COMP,
+ TEGRA_IO_PADS_CSIA,
+ TEGRA_IO_PADS_CSIB,
+ TEGRA_IO_PADS_CSIC,
+ TEGRA_IO_PADS_CSID,
+ TEGRA_IO_PADS_CSIE,
+ TEGRA_IO_PADS_CSIF,
+ TEGRA_IO_PADS_DBG,
+ TEGRA_IO_PADS_DEBUG_NONAO,
+ TEGRA_IO_PADS_DMIC,
+ TEGRA_IO_PADS_DP,
+ TEGRA_IO_PADS_DSI,
+ TEGRA_IO_PADS_DSIB,
+ TEGRA_IO_PADS_DSIC,
+ TEGRA_IO_PADS_DSID,
+ TEGRA_IO_PADS_EMMC,
+ TEGRA_IO_PADS_EMMC2,
+ TEGRA_IO_PADS_GPIO,
+ TEGRA_IO_PADS_HDMI,
+ TEGRA_IO_PADS_HSIC,
+ TEGRA_IO_PADS_HV,
+ TEGRA_IO_PADS_LVDS,
+ TEGRA_IO_PADS_MIPI_BIAS,
+ TEGRA_IO_PADS_NAND,
+ TEGRA_IO_PADS_PEX_BIAS,
+ TEGRA_IO_PADS_PEX_CLK1,
+ TEGRA_IO_PADS_PEX_CLK2,
+ TEGRA_IO_PADS_PEX_CNTRL,
+ TEGRA_IO_PADS_SDMMC1,
+ TEGRA_IO_PADS_SDMMC3,
+ TEGRA_IO_PADS_SDMMC4,
+ TEGRA_IO_PADS_SPI,
+ TEGRA_IO_PADS_SPI_HV,
+ TEGRA_IO_PADS_SYS_DDC,
+ TEGRA_IO_PADS_UART,
+ TEGRA_IO_PADS_USB0,
+ TEGRA_IO_PADS_USB1,
+ TEGRA_IO_PADS_USB2,
+ TEGRA_IO_PADS_USB3,
+ TEGRA_IO_PADS_USB_BIAS,
+
+ /* Last entry */
+ TEGRA_IO_PADS_MAX,
+};
+
+/* tegra_io_pads_vconf_voltage: The voltage level of IO rails which source
+ * the IO pads.
+ */
+enum tegra_io_pads_vconf_voltage {
+ TEGRA_IO_PADS_VCONF_1800000UV,
+ TEGRA_IO_PADS_VCONF_3300000UV,
+};
#ifdef CONFIG_ARCH_TEGRA
int tegra_powergate_is_powered(unsigned int id);
@@ -118,8 +152,16 @@ int tegra_powergate_remove_clamping(unsigned int id);
int tegra_powergate_sequence_power_up(unsigned int id, struct clk *clk,
struct reset_control *rst);
-int tegra_io_rail_power_on(unsigned int id);
-int tegra_io_rail_power_off(unsigned int id);
+/* Power enable/disable of the IO pads */
+int tegra_io_pads_power_enable(enum tegra_io_pads id);
+int tegra_io_pads_power_disable(enum tegra_io_pads id);
+int tegra_io_pads_power_is_enabled(enum tegra_io_pads id);
+
+/* Set/get Tegra IO pads voltage config registers */
+int tegra_io_pads_set_voltage_config(enum tegra_io_pads id,
+ enum tegra_io_pads_vconf_voltage rail_uv);
+int tegra_io_pads_get_voltage_config(enum tegra_io_pads id);
+
#else
static inline int tegra_powergate_is_powered(unsigned int id)
{
@@ -148,14 +190,31 @@ static inline int tegra_powergate_sequence_power_up(unsigned int id,
return -ENOSYS;
}
-static inline int tegra_io_rail_power_on(unsigned int id)
+static inline int tegra_io_pads_power_enable(enum tegra_io_pads id)
{
- return -ENOSYS;
+ return -ENOTSUPP;
}
-static inline int tegra_io_rail_power_off(unsigned int id)
+static inline int tegra_io_pads_power_disable(enum tegra_io_pads id)
{
- return -ENOSYS;
+ return -ENOTSUPP;
+}
+
+static inline int tegra_io_pads_power_is_enabled(enum tegra_io_pads id)
+{
+ return -ENOTSUPP;
+}
+
+static inline int tegra_io_pads_set_voltage_config(
+ enum tegra_io_pads id,
+ enum tegra_io_pads_vconf_voltage rail_uv)
+{
+ return -ENOTSUPP;
+}
+
+static inline int tegra_io_pads_get_voltage_config(enum tegra_io_pads id)
+{
+ return -ENOTSUPP;
}
#endif /* CONFIG_ARCH_TEGRA */
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Jon Hunter <jonathanh@nvidia.com> |
|---|---|
| Date | 2016-05-20 15:40 +0200 |
| Subject | Re: [PATCH V6 3/3] soc/tegra: pmc: Add support for IO pads power state and voltage |
| Message-ID | <rASOJ-65o-13@gated-at.bofh.it> |
| In reply to | #1404381 |
On 20/05/16 12:59, Laxman Dewangan wrote:
> The IO pins of Tegra SoCs are grouped for common control of IO
> interface like setting voltage signal levels and power state of
> the interface. The group is generally referred as IO pads. The
> power state and voltage control of IO pins can be done at IO pads
> level.
>
> Tegra generation SoC supports the power down of IO pads when it
> is not used even in the active state of system. This saves power
> from that IO interface. Also it supports multiple voltage level
> in IO pins for interfacing on some of pads. The IO pad voltage is
> automatically detected till T124, hence SW need not to configure
> this. But from T210, the automatically detection logic has been
> removed, hence SW need to explicitly set the IO pad voltage into
> IO pad configuration registers.
>
> Add support to set the power states and voltage level of the IO pads
> from client driver. The implementation for the APIs are in generic
> which is applicable for all generation os Tegra SoC.
>
> IO pads ID and information of bit field for power state and voltage
> level controls are added for Tegra124, Tegra132 and Tegra210. The SOR
> driver is modified to use the new APIs.
>
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
>
> ---
> Changes from V1:
> This is reworked on earlier path to have separation between IO rails and
> io pads and add power state and voltage control APIs in single call.
>
> Changes from V2:
> - Remove the tegra_io_rail_power_off/on() apis and change client (sor) driver
> to use the new APIs for IO pad power.
> - Remove the TEGRA_IO_RAIL_ macros.
>
> Changes from V3:
> - Make all pad_id/io_pad_id to id.
> - tegra_io_pad_ -> tegra_io_pads
> - dpd_bit -> bit, pwr_mask/bit to mask/bit.
> - Rename function to tegra_io_pads_{set,get}_voltage_config
> - Make the io pad tables common for all SoC.
> - Make io_pads enums.
> - Add enums for voltage.
>
> Changes from V4:
> - IO_PAD->IO_PADS
> - TEGRA_IO_PADS_POWER_SOURCE_ -> TEGRA_IO_PADS_VCONF_
>
> Changes from V5:
> - Fix comment style to multi-line format.
> - Use -EINVAL instead of -1 to refactor some of function as suggested by Jon.
> ---
> drivers/gpu/drm/tegra/sor.c | 8 +-
> drivers/soc/tegra/pmc.c | 221 ++++++++++++++++++++++++++++++++++++++------
> include/soc/tegra/pmc.h | 133 ++++++++++++++++++--------
> 3 files changed, 295 insertions(+), 67 deletions(-)
...
> +/* tegra_io_pads_config_info: Tegra IO pads bit config info.
> + * @dpd_config_bit: DPD configuration bit position. -1 if not supported.
> + * @voltage_config_bit: Voltage configuration bit position. -1 if not supported.
> + * @soc_mask: Bitwise OR of SoC masks if IO pads supported on that SoC.
> + */
Comment coding style :-(
> +struct tegra_io_pads_config_info {
> + int dpd_config_bit;
> + int voltage_config_bit;
> + int soc_mask;
> +};
> +
> struct tegra_pmc_soc {
> unsigned int num_powergates;
> const char *const *powergates;
> unsigned int num_cpu_powergates;
> const u8 *cpu_powergates;
> -
> + int io_pads_soc_mask;
> bool has_tsense_reset;
> bool has_gpu_clamps;
> };
> @@ -196,6 +220,14 @@ static void tegra_pmc_writel(u32 value, unsigned long offset)
> writel(value, pmc->base + offset);
> }
>
> +static void tegra_pmc_rmw(unsigned long offset, u32 mask, u32 val)
> +{
> + u32 pmc_reg = tegra_pmc_readl(offset);
> +
> + pmc_reg = (pmc_reg & ~mask) | (val & mask);
> + tegra_pmc_writel(pmc_reg, offset);
> +}
> +
> static inline bool tegra_powergate_state(int id)
> {
> if (id == TEGRA_POWERGATE_3D && pmc->soc->has_gpu_clamps)
> @@ -841,21 +873,98 @@ static void tegra_powergate_init(struct tegra_pmc *pmc)
> of_node_put(np);
> }
>
> -static int tegra_io_rail_prepare(unsigned int id, unsigned long *request,
> - unsigned long *status, unsigned int *bit)
> +#define TEGRA_IO_PADS_CONFIG(_id, _dpd, _volt, _soc) \
> +[TEGRA_IO_PADS_##_id] = { \
> + .dpd_config_bit = (_dpd), \
> + .voltage_config_bit = (_volt), \
> + .soc_mask = (_soc), \
> +}
> +
> +static struct tegra_io_pads_config_info
> +tegra_io_pads_configs[TEGRA_IO_PADS_MAX] = {
> + TEGRA_IO_PADS_CONFIG(CSIA, 0, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(CSIB, 1, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(DSI, 2, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(MIPI_BIAS, 3, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(PEX_BIAS, 4, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(PEX_CLK1, 5, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(PEX_CLK2, 6, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(USB0, 9, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(USB1, 10, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(USB2, 11, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(USB_BIAS, 12, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(NAND, 13, -EINVAL, TEGRA_IO_PADS_T124),
> + TEGRA_IO_PADS_CONFIG(UART, 14, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(BB, 15, -EINVAL, TEGRA_IO_PADS_T124),
> + TEGRA_IO_PADS_CONFIG(AUDIO, 17, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(USB3, 18, -EINVAL, TEGRA_IO_PADS_T210),
> + TEGRA_IO_PADS_CONFIG(HSIC, 19, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(COMP, 22, -EINVAL, TEGRA_IO_PADS_T124),
> + TEGRA_IO_PADS_CONFIG(DBG, 25, -EINVAL, TEGRA_IO_PADS_T210),
> + TEGRA_IO_PADS_CONFIG(DEBUG_NONAO, 26, -EINVAL, TEGRA_IO_PADS_T210),
> + TEGRA_IO_PADS_CONFIG(GPIO, 27, 21, TEGRA_IO_PADS_T210),
> + TEGRA_IO_PADS_CONFIG(HDMI, 28, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(PEX_CNTRL, 32, -EINVAL, TEGRA_IO_PADS_T124),
> + TEGRA_IO_PADS_CONFIG(SDMMC1, 33, 12, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(SDMMC3, 34, 13, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(SDMMC4, 35, -EINVAL, TEGRA_IO_PADS_T124),
> + TEGRA_IO_PADS_CONFIG(EMMC, 35, -EINVAL, TEGRA_IO_PADS_T210),
> + TEGRA_IO_PADS_CONFIG(CAM, 36, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(EMMC2, 37, -EINVAL, TEGRA_IO_PADS_T210),
> + TEGRA_IO_PADS_CONFIG(HV, 38, -EINVAL, TEGRA_IO_PADS_T124),
> + TEGRA_IO_PADS_CONFIG(DSIB, 39, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(DSIC, 40, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(DSID, 41, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(CSIC, 42, -EINVAL, TEGRA_IO_PADS_T210),
> + TEGRA_IO_PADS_CONFIG(CSID, 43, -EINVAL, TEGRA_IO_PADS_T210),
> + TEGRA_IO_PADS_CONFIG(CSIE, 44, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(CSIF, 45, -EINVAL, TEGRA_IO_PADS_T210),
> + TEGRA_IO_PADS_CONFIG(SPI, 46, -EINVAL, TEGRA_IO_PADS_T210),
> + TEGRA_IO_PADS_CONFIG(SPI_HV, 47, 23, TEGRA_IO_PADS_T210),
> + TEGRA_IO_PADS_CONFIG(DMIC, 50, -EINVAL, TEGRA_IO_PADS_T210),
> + TEGRA_IO_PADS_CONFIG(DP, 51, -EINVAL, TEGRA_IO_PADS_T210),
> + TEGRA_IO_PADS_CONFIG(LVDS, 57, -EINVAL, TEGRA_IO_PADS_T124_T210),
> + TEGRA_IO_PADS_CONFIG(SYS_DDC, 58, -EINVAL, TEGRA_IO_PADS_T124),
> + TEGRA_IO_PADS_CONFIG(AUDIO_HV, 61, 18, TEGRA_IO_PADS_T210),
> +};
> +
> +static inline int tegra_io_pads_to_dpd_bit(const struct tegra_pmc_soc *soc,
> + enum tegra_io_pads id)
> {
> - unsigned long rate, value;
> + if (tegra_io_pads_configs[id].soc_mask & soc->io_pads_soc_mask)
> + return tegra_io_pads_configs[id].dpd_config_bit;
I realise now that we are not checking if 'id' is greater than
TEGRA_IO_PADS_MAX anywhere. This should probably be handled here.
>
> - *bit = id % 32;
> + return -EINVAL;
> +}
>
> - /*
> - * There are two sets of 30 bits to select IO rails, but bits 30 and
> - * 31 are control bits rather than IO rail selection bits.
> - */
> - if (id > 63 || *bit == 30 || *bit == 31)
> +static int tegra_io_pads_to_voltage_bit(const struct tegra_pmc_soc *soc,
> + enum tegra_io_pads id)
> +{
> + /* T210 only supports io-pad voltage config bit */
> + if (soc->io_pads_soc_mask != TEGRA_IO_PADS_T210)
> return -EINVAL;
>
> - if (id < 32) {
> + if (tegra_io_pads_configs[id].soc_mask & soc->io_pads_soc_mask)
> + return tegra_io_pads_configs[id].voltage_config_bit;
Same here for 'id'
> +
> + return -EINVAL;
> +}
> +
> +static int tegra_io_pads_dpd_prepare(enum tegra_io_pads id,
> + unsigned long *request,
> + unsigned long *status,
> + unsigned int *bit)
> +{
> + unsigned long rate, value;
> + int ret;
> +
> + ret = tegra_io_pads_to_dpd_bit(pmc->soc, id);
> + if (ret < 0)
> + return ret;
> +
> + *bit = ret % 32;
> +
> + if (*bit < 32) {
Isn't bit always less than 32 here now?
Cheers
Jon
--
nvpublic
[toc] | [prev] | [next] | [standalone]
| From | Laxman Dewangan <ldewangan@nvidia.com> |
|---|---|
| Date | 2016-05-20 15:50 +0200 |
| Subject | Re: [PATCH V6 3/3] soc/tegra: pmc: Add support for IO pads power state and voltage |
| Message-ID | <rASYp-68P-15@gated-at.bofh.it> |
| In reply to | #1404429 |
On Friday 20 May 2016 07:02 PM, Jon Hunter wrote:
> On 20/05/16 12:59, Laxman Dewangan wrote:
>> +/* tegra_io_pads_config_info: Tegra IO pads bit config info.
>> + * @dpd_config_bit: DPD configuration bit position. -1 if not supported.
>> + * @voltage_config_bit: Voltage configuration bit position. -1 if not supported.
>> + * @soc_mask: Bitwise OR of SoC masks if IO pads supported on that SoC.
>> + */
> Comment coding style :-(
I saw this style multiple places and so intentionally left here.
If comment is inside the code then
/*
* first-line comment
* second line
*/
but for function, it can have in single line.
Anyhow, I will correct in next cycle.
>
>> +static inline int tegra_io_pads_to_dpd_bit(const struct tegra_pmc_soc *soc,
>> + enum tegra_io_pads id)
>> {
>> - unsigned long rate, value;
>> + if (tegra_io_pads_configs[id].soc_mask & soc->io_pads_soc_mask)
>> + return tegra_io_pads_configs[id].dpd_config_bit;
> I realise now that we are not checking if 'id' is greater than
> TEGRA_IO_PADS_MAX anywhere. This should probably be handled here.
Do we need to check? Our parameter type is enum type and hence it is not
expected to have outside of the MAX.
I think it will be unnecessarily check here.
>>
>>
>> + int ret;
>> +
>> + ret = tegra_io_pads_to_dpd_bit(pmc->soc, id);
>> + if (ret < 0)
>> + return ret;
>> +
>> + *bit = ret % 32;
>> +
>> + if (*bit < 32) {
> Isn't bit always less than 32 here now?
>
Yaah this is bug. should be if (ret < 32)
My testcase has the pad name whose dpd bit is < 32 and hence did not
catch it..
BTW, do you have the T124 based platform for SOR testing? I have T210
platforms where I am testing.
[toc] | [prev] | [next] | [standalone]
| From | Jon Hunter <jonathanh@nvidia.com> |
|---|---|
| Date | 2016-05-20 16:10 +0200 |
| Subject | Re: [PATCH V6 3/3] soc/tegra: pmc: Add support for IO pads power state and voltage |
| Message-ID | <rAThM-6uH-29@gated-at.bofh.it> |
| In reply to | #1404436 |
On 20/05/16 14:34, Laxman Dewangan wrote:
>
> On Friday 20 May 2016 07:02 PM, Jon Hunter wrote:
>> On 20/05/16 12:59, Laxman Dewangan wrote:
>>> +/* tegra_io_pads_config_info: Tegra IO pads bit config info.
>>> + * @dpd_config_bit: DPD configuration bit position. -1 if not
>>> supported.
>>> + * @voltage_config_bit: Voltage configuration bit position. -1 if
>>> not supported.
>>> + * @soc_mask: Bitwise OR of SoC masks if IO pads supported on that SoC.
>>> + */
>> Comment coding style :-(
>
> I saw this style multiple places and so intentionally left here.
> If comment is inside the code then
> /*
> * first-line comment
> * second line
> */
>
> but for function, it can have in single line.
>
> Anyhow, I will correct in next cycle.
>
>
>>
>>> +static inline int tegra_io_pads_to_dpd_bit(const struct
>>> tegra_pmc_soc *soc,
>>> + enum tegra_io_pads id)
>>> {
>>> - unsigned long rate, value;
>>> + if (tegra_io_pads_configs[id].soc_mask & soc->io_pads_soc_mask)
>>> + return tegra_io_pads_configs[id].dpd_config_bit;
>> I realise now that we are not checking if 'id' is greater than
>> TEGRA_IO_PADS_MAX anywhere. This should probably be handled here.
>
> Do we need to check? Our parameter type is enum type and hence it is not
> expected to have outside of the MAX.
> I think it will be unnecessarily check here.
The enum does not prevent someone from passing a large number so I think
we should check.
>>>
>>> + int ret;
>>> +
>>> + ret = tegra_io_pads_to_dpd_bit(pmc->soc, id);
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + *bit = ret % 32;
>>> +
>>> + if (*bit < 32) {
>> Isn't bit always less than 32 here now?
>>
> Yaah this is bug. should be if (ret < 32)
>
> My testcase has the pad name whose dpd bit is < 32 and hence did not
> catch it..
>
> BTW, do you have the T124 based platform for SOR testing? I have T210
> platforms where I am testing.
Yes, I should be able to test on the t124-nyan-big.
Cheers
Jon
--
nvpublic
[toc] | [prev] | [next] | [standalone]
| From | Jon Hunter <jonathanh@nvidia.com> |
|---|---|
| Date | 2016-05-20 16:20 +0200 |
| Subject | Re: [PATCH V6 3/3] soc/tegra: pmc: Add support for IO pads power state and voltage |
| Message-ID | <rATrs-6y8-19@gated-at.bofh.it> |
| In reply to | #1404436 |
On 20/05/16 14:34, Laxman Dewangan wrote: > > On Friday 20 May 2016 07:02 PM, Jon Hunter wrote: >> On 20/05/16 12:59, Laxman Dewangan wrote: >>> +/* tegra_io_pads_config_info: Tegra IO pads bit config info. >>> + * @dpd_config_bit: DPD configuration bit position. -1 if not >>> supported. >>> + * @voltage_config_bit: Voltage configuration bit position. -1 if >>> not supported. >>> + * @soc_mask: Bitwise OR of SoC masks if IO pads supported on that SoC. >>> + */ >> Comment coding style :-( > > I saw this style multiple places and so intentionally left here. > If comment is inside the code then > /* > * first-line comment > * second line > */ > > but for function, it can have in single line. > > Anyhow, I will correct in next cycle. Actually, this should be in kernel-doc format [0]. Jon [0] Documentation/kernel-doc-nano-HOWTO.txt
[toc] | [prev] | [next] | [standalone]
| From | Laxman Dewangan <ldewangan@nvidia.com> |
|---|---|
| Date | 2016-05-20 14:20 +0200 |
| Subject | [PATCH V6 2/3] soc/tegra: pmc: Correct type of variable for tegra_pmc_readl() |
| Message-ID | <rARzk-5nH-27@gated-at.bofh.it> |
| In reply to | #1404378 |
The function tegra_pmc_readl() returns the u32 type data and hence
change the data type of variable where this data is stored to u32
type.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
---
Changes from V1:
-This is new in series as per discussion on V1 series to use u32 for
tegra_pmc_readl.
Changes from V2:
- Make unsigned long to u32 for some missed variable from V1.
Changes from V3:
- Revert back the value to ulong where time calcualtion is done.
Changes from V4:
- Collected RB from Jon.
Changes from V4:
- None
---
drivers/soc/tegra/pmc.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 2c3f1f9..09c2b97 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -875,10 +875,10 @@ static int tegra_io_rail_prepare(unsigned int id, unsigned long *request,
return 0;
}
-static int tegra_io_rail_poll(unsigned long offset, unsigned long mask,
- unsigned long val, unsigned long timeout)
+static int tegra_io_rail_poll(unsigned long offset, u32 mask,
+ u32 val, unsigned long timeout)
{
- unsigned long value;
+ u32 value;
timeout = jiffies + msecs_to_jiffies(timeout);
@@ -900,8 +900,9 @@ static void tegra_io_rail_unprepare(void)
int tegra_io_rail_power_on(unsigned int id)
{
- unsigned long request, status, value;
- unsigned int bit, mask;
+ unsigned long request, status;
+ unsigned int bit;
+ u32 value, mask;
int err;
mutex_lock(&pmc->powergates_lock);
@@ -935,8 +936,9 @@ EXPORT_SYMBOL(tegra_io_rail_power_on);
int tegra_io_rail_power_off(unsigned int id)
{
- unsigned long request, status, value;
- unsigned int bit, mask;
+ unsigned long request, status;
+ unsigned int bit;
+ u32 value, mask;
int err;
mutex_lock(&pmc->powergates_lock);
--
2.1.4
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web