Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1345462 > unrolled thread

[PATCH v19 05/10] sched: Mark __schedule() stack frame as non-standard

Started byJosh Poimboeuf <jpoimboe@redhat.com>
First post2016-02-29 05:30 +0100
Last post2016-02-29 12:10 +0100
Articles 2 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH v19 05/10] sched: Mark __schedule() stack frame as non-standard Josh Poimboeuf <jpoimboe@redhat.com> - 2016-02-29 05:30 +0100
    [tip:core/objtool] sched: Mark __schedule() stack frame as  non-standard tip-bot for Josh Poimboeuf <tipbot@zytor.com> - 2016-02-29 12:10 +0100

#1345462 — [PATCH v19 05/10] sched: Mark __schedule() stack frame as non-standard

FromJosh Poimboeuf <jpoimboe@redhat.com>
Date2016-02-29 05:30 +0100
Subject[PATCH v19 05/10] sched: Mark __schedule() stack frame as non-standard
Message-ID<r7nD4-5hw-3@gated-at.bofh.it>
objtool reports the following warnings for __schedule():

  kernel/sched/core.o: warning: objtool:__schedule()+0x3c0: duplicate frame pointer save
  kernel/sched/core.o: warning: objtool:__schedule()+0x3fd: sibling call from callable instruction with changed frame pointer
  kernel/sched/core.o: warning: objtool:__schedule()+0x40a: call without frame pointer save/setup
  kernel/sched/core.o: warning: objtool:__schedule()+0x7fd: frame pointer state mismatch
  kernel/sched/core.o: warning: objtool:__schedule()+0x421: frame pointer state mismatch

Basically it's confused by two unusual attributes of the switch_to()
macro:

1. It saves prev's frame pointer to the old stack and restores next's
   frame pointer from the new stack.

2. For new tasks it jumps directly to ret_from_fork.

Eventually it would probably be a good idea to clean up the
ret_from_fork hack so that new tasks are created with a valid initial
stack, as suggested by Andy:

  https://lkml.kernel.org/r/CALCETrWsqCw4L1qKO9j9L5F+4ED4viuLQTFc=n1pKBZfFPQUFg@mail.gmail.com

Then __schedule() could return normally into the new code and objtool
hopefully wouldn't have a problem anymore.

In the meantime, mark its stack frame as non-standard so we can have a
baseline with no objtool warnings.  The marker also serves as a reminder
that this code could be improved a bit.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
---
 kernel/sched/core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 9503d59..641043d 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -74,6 +74,7 @@
 #include <linux/binfmts.h>
 #include <linux/context_tracking.h>
 #include <linux/compiler.h>
+#include <linux/frame.h>
 
 #include <asm/switch_to.h>
 #include <asm/tlb.h>
@@ -3288,6 +3289,7 @@ static void __sched notrace __schedule(bool preempt)
 
 	balance_callback(rq);
 }
+STACK_FRAME_NON_STANDARD(__schedule); /* switch_to() */
 
 static inline void sched_submit_work(struct task_struct *tsk)
 {
-- 
2.4.3

[toc] | [next] | [standalone]


#1345659 — [tip:core/objtool] sched: Mark __schedule() stack frame as non-standard

Fromtip-bot for Josh Poimboeuf <tipbot@zytor.com>
Date2016-02-29 12:10 +0100
Subject[tip:core/objtool] sched: Mark __schedule() stack frame as non-standard
Message-ID<r7tSb-2et-29@gated-at.bofh.it>
In reply to#1345462
Commit-ID:  8e05e96ac949c80704d0a38420bf60dcf18c938f
Gitweb:     http://git.kernel.org/tip/8e05e96ac949c80704d0a38420bf60dcf18c938f
Author:     Josh Poimboeuf <jpoimboe@redhat.com>
AuthorDate: Sun, 28 Feb 2016 22:22:38 -0600
Committer:  Ingo Molnar <mingo@kernel.org>
CommitDate: Mon, 29 Feb 2016 08:35:11 +0100

sched: Mark __schedule() stack frame as non-standard

objtool reports the following warnings for __schedule():

  kernel/sched/core.o: warning: objtool:__schedule()+0x3c0: duplicate frame pointer save
  kernel/sched/core.o: warning: objtool:__schedule()+0x3fd: sibling call from callable instruction with changed frame pointer
  kernel/sched/core.o: warning: objtool:__schedule()+0x40a: call without frame pointer save/setup
  kernel/sched/core.o: warning: objtool:__schedule()+0x7fd: frame pointer state mismatch
  kernel/sched/core.o: warning: objtool:__schedule()+0x421: frame pointer state mismatch

Basically it's confused by two unusual attributes of the switch_to()
macro:

1. It saves prev's frame pointer to the old stack and restores next's
   frame pointer from the new stack.

2. For new tasks it jumps directly to ret_from_fork.

Eventually it would probably be a good idea to clean up the
ret_from_fork hack so that new tasks are created with a valid initial
stack, as suggested by Andy:

  https://lkml.kernel.org/r/CALCETrWsqCw4L1qKO9j9L5F+4ED4viuLQTFc=n1pKBZfFPQUFg@mail.gmail.com

Then __schedule() could return normally into the new code and objtool
hopefully wouldn't have a problem anymore.

In the meantime, mark its stack frame as non-standard so we can have a
baseline with no objtool warnings.  The marker also serves as a reminder
that this code could be improved a bit.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/91190e324ebd7fcd01748d508d0dfd4693e84d91.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 kernel/sched/core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 9503d59..641043d 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -74,6 +74,7 @@
 #include <linux/binfmts.h>
 #include <linux/context_tracking.h>
 #include <linux/compiler.h>
+#include <linux/frame.h>
 
 #include <asm/switch_to.h>
 #include <asm/tlb.h>
@@ -3288,6 +3289,7 @@ static void __sched notrace __schedule(bool preempt)
 
 	balance_callback(rq);
 }
+STACK_FRAME_NON_STANDARD(__schedule); /* switch_to() */
 
 static inline void sched_submit_work(struct task_struct *tsk)
 {

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web