Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1341722 > unrolled thread

[PATCH 3.12 001/142] dcache: use IS_ROOT to decide where dentry is hashed

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 3.12 001/142] dcache: use IS_ROOT to decide where dentry is hashed Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:10 +0100
    [PATCH 3.12 140/142] module: wrapper for symbol name. Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:10 +0100
    [PATCH 3.12 103/142] SCSI: Add Marvell Console to VPD blacklist Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:10 +0100
    [PATCH 3.12 141/142] libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:10 +0100
    [PATCH 3.12 130/142] xhci: Fix list corruption in urb dequeue at host removal Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 137/142] dump_stack: avoid potential deadlocks Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 133/142] scripts/bloat-o-meter: fix python3 syntax error Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 106/142] iio: lpc32xx_adc: fix warnings caused by enabling unprepared clock Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 138/142] intel_scu_ipcutil: underflow in scu_reg_access() Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 125/142] Input: elantech - add Fujitsu Lifebook U745 to force crc_enabled Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 135/142] radix-tree: fix race in gang lookup Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 129/142] mm/memory_hotplug.c: check for missing sections in test_pages_in_a_zone() Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 127/142] Input: i8042 - add Fujitsu Lifebook U745 to the nomux list Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 126/142] Input: elantech - mark protocols v2 and v3 as semi-mt Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 120/142] ARM: 8519/1: ICST: try other dividends than 1 Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 132/142] dma-debug: switch check from _text to _stext Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 128/142] iommu/vt-d: Fix 64-bit accesses to 32-bit DMAR_GSTS_REG Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 134/142] memcg: only free spare array when readers are done Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 119/142] ARM: 8471/1: need to save/restore arm register(r11) when it is corrupted Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 105/142] iio:ad7793: Fix ad7785 product ID Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 131/142] m32r: fix m32104ut_defconfig build fail Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 136/142] radix-tree: fix oops after radix_tree_iter_retry Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:20 +0100
    [PATCH 3.12 117/142] udf: Check output buffer length when converting name to CS0 Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 116/142] udf: Prevent buffer overrun with multi-byte characters Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 121/142] ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz() Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 124/142] mm: fix mlock accouting Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 122/142] fuse: break infinite loop in fuse_fill_write_pages() Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 108/142] iio: ad5064: Fix ad5629/ad5669 shift Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 114/142] nfs: Fix race in __update_open_stateid() Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 112/142] cifs_dbg() outputs an uninitialized buffer in cifs_readdir() Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 109/142] iio: fix some warning messages Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 102/142] scsi_dh_rdac: always retry MODE SELECT on command lock violation Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 118/142] ARM: dts: Kirkwood: Fix QNAP TS219 power-off Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 099/142] iscsi-target: Fix potential dead-lock during node acl delete Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 101/142] drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 123/142] mm: soft-offline: check return value in second __get_any_page() call Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 113/142] cifs: fix erroneous return value Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 111/142] iio: dac: mcp4725: set iio name property in sysfs Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 110/142] iio: adis_buffer: Fix out-of-bounds memory access Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 115/142] udf: limit the maximum number of indirect extents in a row Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 068/142] ahci: Intel DNV device IDs SATA Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:30 +0100
    [PATCH 3.12 090/142] ptrace: use fsuid, fsgid, effective creds for fs access checks Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 088/142] perf: Fix inherited events vs. tracepoint filters Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 094/142] scsi: restart list search after unlock in scsi_remove_target Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 089/142] perf trace: Fix documentation for -i Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 085/142] ext4: fix potential integer overflow Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 065/142] crypto: algif_hash - Require setkey before accept(2) Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 083/142] serial: 8250_pci: Correct uartclk for xr17v35x expansion chips Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 093/142] klist: fix starting point removed bug in klist iterators Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 095/142] scsi_sysfs: Fix queue_ramp_up_period return code Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 086/142] btrfs: properly set the termination value of ctx->pos in readdir Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 091/142] tools lib traceevent: Fix output of %llu for 64 bit values read on 32 bit machines Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 087/142] Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 098/142] SCSI: Fix NULL pointer dereference in runtime PM Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 096/142] iscsi-target: Fix rx_login_comp hang after login failure Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 082/142] pty: make sure super_block is still valid in final /dev/tty close Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 100/142] SCSI: fix crashes in sd and sr runtime PM Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 092/142] tracing: Fix freak link error caused by branch tracer Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 066/142] AHCI: Fix softreset failed issue of Port Multiplier Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 097/142] Fix a memory leak in scsi_host_dev_release() Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:40 +0100
    [PATCH 3.12 074/142] tty: remove platform_sysrq_reset_seq Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 077/142] ALSA: seq: Fix double port list deletion Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 062/142] crypto: af_alg - Add nokey compatibility path Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 081/142] pty: fix possible use after free of tty->driver_data Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 073/142] binfmt_elf: Don't clobber passed executable's file header Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 060/142] crypto: af_alg - Disallow bind/setkey/... after accept(2) Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 076/142] x86/mm/pat: Avoid truncation when converting cpa->numpages to address Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 002/142] pipe: Fix buffer offset after partially failed read Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 064/142] crypto: hash - Add crypto_ahash_has_setkey Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 063/142] crypto: algif_skcipher - Add nokey compatibility path Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 072/142] FS-Cache: Don't override netfs's primary_index if registering failed Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 078/142] phy: twl4030-usb: Relase usb phy on unload Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 070/142] crypto: user - lock crypto_alg_list on alg dump Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 080/142] staging/speakup: Use tty_ldisc_ref() for paste kworker Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 061/142] crypto: af_alg - Fix socket double-free when accept fails Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 071/142] FS-Cache: Increase reference of parent after registering, netfs success Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 079/142] wan/x25: Fix use-after-free in x25_asy_open_tty() Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 059/142] crypto: algif_skcipher - Require setkey before accept(2) Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 075/142] s390: fix normalization bug in exception table sorting Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 084/142] AIO: properly check iovec sizes Jiri Slaby <jslaby@suse.cz> - 2016-02-24 11:50 +0100
    [PATCH 3.12 054/142] USB: option: fix Cinterion AHxx enumeration Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:00 +0100
    [PATCH 3.12 058/142] ext4: Fix handling of extended tv_sec Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:00 +0100
    [PATCH 3.12 057/142] xhci: fix usb2 resume timing and races. Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:00 +0100
    [PATCH 3.12 003/142] Revert "ocfs2: fix umask ignored issue" Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:00 +0100
    [PATCH 3.12 052/142] USB: cp210x: add ID for IAI USB to RS485 adaptor Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:00 +0100
    [PATCH 3.12 051/142] USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:00 +0100
    [PATCH 3.12 055/142] tty: Fix GPF in flush_to_ldisc() Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:00 +0100
    [PATCH 3.12 056/142] tty: Fix unsafe ldisc reference via ioctl(TIOCGETD) Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:00 +0100
    [PATCH 3.12 039/142] ALSA: seq: Fix lockdep warnings due to double mutex locks Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 053/142] USB: serial: option: Adding support for Telit LE922 Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 042/142] ALSA: timer: Fix link corruption due to double start or stop Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 010/142] sh64: fix __NR_fgetxattr Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 050/142] USB: serial: visor: fix crash on detecting device without write_urbs Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 004/142] proc: actually make proc_fd_permission() thread-friendly Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 047/142] ALSA: hda - Fix speaker output from VAIO AiO machines Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 040/142] ALSA: timer: Code cleanup Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 045/142] ALSA: hda - Add fixup for Mac Mini 7,1 model Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 048/142] ALSA: dummy: Implement timer backend switching more safely Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 044/142] ALSA: timer: Fix race between stop and interrupt Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 043/142] ALSA: timer: Fix wrong instance passed to slave callbacks Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 046/142] ALSA: hda - Fix static checker warning in patch_hdmi.c Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 041/142] ALSA: timer: Fix leftover link at closing Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 038/142] ALSA: seq: Fix race at closing in virmidi driver Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 049/142] saa7134-alsa: Only frees registered sound cards Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:10 +0100
    [PATCH 3.12 032/142] ALSA: seq: Fix incorrect sanity check at snd_seq_oss_synth_cleanup() Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 031/142] ALSA: dummy: Disable switching timer backend via sysfs Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 022/142] parisc: Drop unused MADV_xxxK_PAGES flags from asm/mman.h Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 024/142] parisc: Fix __ARCH_SI_PREAMBLE_SIZE Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 029/142] ALSA: usb-audio: avoid freeing umidi object twice Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 019/142] tracing: Fix setting of start_index in find_next() Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 025/142] v4l2-compat-ioctl32: fix alignment for ARM64 Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 030/142] ALSA: compress: Disable GET_CODEC_CAPS ioctl for some architectures Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 005/142] remoteproc: avoid stack overflow in debugfs file Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 028/142] ALSA: usb-audio: Fix TEAC UD-501/UD-503/NT-503 usb delay Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 026/142] media: vb2 dma-contig: Fully cache synchronise buffers in prepare and finish Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 021/142] fix calculation of meta_bg descriptor backups Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 007/142] kernel/signal.c: unexport sigsuspend() Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 035/142] ALSA: pcm: Fix potential deadlock in OSS emulation Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 034/142] ALSA: rawmidi: Fix race at copying & updating the position Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 037/142] ALSA: seq: Fix yet another races among ALSA timer accesses Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 023/142] parisc: Fix syscall restarts Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 027/142] fix sysvfs symlinks Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 020/142] jbd2: Fix unreclaimed pages after truncate in data=journal mode Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 009/142] ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 006/142] fat: fix fake_offset handling on error path Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 033/142] ALSA: rawmidi: Remove kernel WARNING for NULL user-space buffer check Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 036/142] ASoC: dpcm: fix the BE state on hw_free Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:20 +0100
    [PATCH 3.12 017/142] vTPM: fix memory allocation flag for rtce buffer at kernel boot Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:30 +0100
    [PATCH 3.12 014/142] spi: fix parent-device reference leak Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:30 +0100
    [PATCH 3.12 011/142] Revert "dm mpath: fix stalls when handling invalid ioctls" Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:30 +0100
    [PATCH 3.12 018/142] mtd: mtdpart: fix add_mtd_partitions error path Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:30 +0100
    [PATCH 3.12 016/142] wlcore/wl12xx: spi: fix NULL pointer dereference (Oops) Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:30 +0100
    [PATCH 3.12 012/142] spi: atmel: Fix DMA-setup for transfers with more than 8 bits per word Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:30 +0100
    [PATCH 3.12 013/142] spi: ti-qspi: Fix data corruption seen on r/w stress test Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:30 +0100
    [PATCH 3.12 008/142] ocfs2/dlm: ignore cleaning the migration mle that is inuse Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:30 +0100
    [PATCH 3.12 015/142] wlcore/wl12xx: spi: fix oops on firmware load Jiri Slaby <jslaby@suse.cz> - 2016-02-24 12:30 +0100

Page 1 of 7  [1] 2 3 4 5 6 7  Next page →

#1341722 — [PATCH 3.12 001/142] dcache: use IS_ROOT to decide where dentry is hashed

From: "J. Bruce Fields" <bfields@redhat.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 7632e465feb182cadc3c9aa1282a057201818a8c upstream.

Every hashed dentry is either hashed in the dentry_hashtable, or a
superblock's s_anon list.

__d_drop() assumes it can determine which is the case by checking
DCACHE_DISCONNECTED; this is not true.

It is true that when DCACHE_DISCONNECTED is cleared, the dentry is not
only hashed on dentry_hashtable, but is fully connected to its parents
back to the root.

But the converse is *not* true: fs/exportfs/expfs.c:reconnect_path()
attempts to connect a directory (found by filehandle lookup) back to
root by ascending to parents and performing lookups one at a time.  It
does not clear DCACHE_DISCONNECTED until it's done, and that is not at
all an atomic process.

In particular, it is possible for DCACHE_DISCONNECTED to be set on a
dentry which is hashed on the dentry_hashtable.

Instead, use IS_ROOT() to check which hash chain a dentry is on.  This
*does* work:

Dentries are hashed only by:

	- d_obtain_alias, which adds an IS_ROOT() dentry to sb_anon.

	- __d_rehash, called by _d_rehash: hashes to the dentry's
	  parent, and all callers of _d_rehash appear to have d_parent
	  set to a "real" parent.
	- __d_rehash, called by __d_move: rehashes the moved dentry to
	  hash chain determined by target, and assigns target's d_parent
	  to its d_parent, before dropping the dentry's d_lock.

Therefore I believe it's safe for a holder of a dentry's d_lock to
assume that it is hashed on sb_anon if and only if IS_ROOT(dentry) is
true.

I believe the incorrect assumption about DCACHE_DISCONNECTED was
originally introduced by ceb5bdc2d246 "fs: dcache per-bucket dcache hash
locking".

Also add a comment while we're here.

Cc: Nick Piggin <npiggin@kernel.dk>
Acked-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/dcache.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/dcache.c b/fs/dcache.c
index 0fa3b3dba96f..40bf046884b1 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -441,7 +441,12 @@ void __d_drop(struct dentry *dentry)
 {
 	if (!d_unhashed(dentry)) {
 		struct hlist_bl_head *b;
-		if (unlikely(dentry->d_flags & DCACHE_DISCONNECTED))
+		/*
+		 * Hashed dentries are normally on the dentry hashtable,
+		 * with the exception of those newly allocated by
+		 * d_obtain_alias, which are always IS_ROOT:
+		 */
+		if (unlikely(IS_ROOT(dentry)))
 			b = &dentry->d_sb->s_anon;
 		else
 			b = d_hash(dentry->d_parent, dentry->d_name.hash);
-- 
2.7.1

[toc] | [next] | [standalone]

#1341723 — [PATCH 3.12 140/142] module: wrapper for symbol name.

From: Rusty Russell <rusty@rustcorp.com.au>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 2e7bac536106236104e9e339531ff0fcdb7b8147 upstream.

This trivial wrapper adds clarity and makes the following patch
smaller.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 kernel/module.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/kernel/module.c b/kernel/module.c
index 7d1c2ea27898..cb56e581062d 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -3425,6 +3425,11 @@ static inline int is_arm_mapping_symbol(const char *str)
 	       && (str[2] == '\0' || str[2] == '.');
 }
 
+static const char *symname(struct module *mod, unsigned int symnum)
+{
+	return mod->strtab + mod->symtab[symnum].st_name;
+}
+
 static const char *get_ksymbol(struct module *mod,
 			       unsigned long addr,
 			       unsigned long *size,
@@ -3447,15 +3452,15 @@ static const char *get_ksymbol(struct module *mod,
 
 		/* We ignore unnamed symbols: they're uninformative
 		 * and inserted at a whim. */
+		if (*symname(mod, i) == '\0'
+		    || is_arm_mapping_symbol(symname(mod, i)))
+			continue;
+
 		if (mod->symtab[i].st_value <= addr
-		    && mod->symtab[i].st_value > mod->symtab[best].st_value
-		    && *(mod->strtab + mod->symtab[i].st_name) != '\0'
-		    && !is_arm_mapping_symbol(mod->strtab + mod->symtab[i].st_name))
+		    && mod->symtab[i].st_value > mod->symtab[best].st_value)
 			best = i;
 		if (mod->symtab[i].st_value > addr
-		    && mod->symtab[i].st_value < nextval
-		    && *(mod->strtab + mod->symtab[i].st_name) != '\0'
-		    && !is_arm_mapping_symbol(mod->strtab + mod->symtab[i].st_name))
+		    && mod->symtab[i].st_value < nextval)
 			nextval = mod->symtab[i].st_value;
 	}
 
@@ -3466,7 +3471,7 @@ static const char *get_ksymbol(struct module *mod,
 		*size = nextval - mod->symtab[best].st_value;
 	if (offset)
 		*offset = addr - mod->symtab[best].st_value;
-	return mod->strtab + mod->symtab[best].st_name;
+	return symname(mod, best);
 }
 
 /* For kallsyms to ask for address resolution.  NULL means not found.  Careful
@@ -3567,8 +3572,7 @@ int module_get_kallsym(unsigned int symnum, unsigned long *value, char *type,
 		if (symnum < mod->num_symtab) {
 			*value = mod->symtab[symnum].st_value;
 			*type = mod->symtab[symnum].st_info;
-			strlcpy(name, mod->strtab + mod->symtab[symnum].st_name,
-				KSYM_NAME_LEN);
+			strlcpy(name, symname(mod, symnum), KSYM_NAME_LEN);
 			strlcpy(module_name, mod->name, MODULE_NAME_LEN);
 			*exported = is_exported(name, *value, mod);
 			preempt_enable();
@@ -3585,7 +3589,7 @@ static unsigned long mod_find_symname(struct module *mod, const char *name)
 	unsigned int i;
 
 	for (i = 0; i < mod->num_symtab; i++)
-		if (strcmp(name, mod->strtab+mod->symtab[i].st_name) == 0 &&
+		if (strcmp(name, symname(mod, i)) == 0 &&
 		    mod->symtab[i].st_info != 'U')
 			return mod->symtab[i].st_value;
 	return 0;
@@ -3627,7 +3631,7 @@ int module_kallsyms_on_each_symbol(int (*fn)(void *, const char *,
 		if (mod->state == MODULE_STATE_UNFORMED)
 			continue;
 		for (i = 0; i < mod->num_symtab; i++) {
-			ret = fn(data, mod->strtab + mod->symtab[i].st_name,
+			ret = fn(data, symname(mod, i),
 				 mod, mod->symtab[i].st_value);
 			if (ret != 0)
 				return ret;
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341725 — [PATCH 3.12 103/142] SCSI: Add Marvell Console to VPD blacklist

From: Mika Westerberg <mika.westerberg@linux.intel.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 82c43310508eb19eb41fe7862e89afeb74030b84 upstream.

I have a Marvell 88SE9230 SATA Controller that has some sort of
integrated console SCSI device attached to one of the ports.

  ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
  ata14.00: configured for UDMA/66
  scsi 13:0:0:0: Processor         Marvell  Console 1.01 PQ: 0 ANSI: 5

Sending it VPD INQUIRY command seem to always fail with following error:

  ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
  ata14.00: irq_stat 0x40000001
  ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in
            Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
  ata14: hard resetting link

This has been minor annoyance (only error printed on dmesg) until commit
09e2b0b14690 ("scsi: rescan VPD attributes") added call to scsi_attach_vpd()
in scsi_rescan_device(). The commit causes the system to splat out
following errors continuously without ever reaching the UI:

  ata14.00: configured for UDMA/66
  ata14: EH complete
  ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
  ata14.00: irq_stat 0x40000001
  ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 6 dma 16640 in
            Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
  ata14: hard resetting link
  ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  ata14.00: configured for UDMA/66
  ata14: EH complete
  ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
  ata14.00: irq_stat 0x40000001
  ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 7 dma 16640 in
            Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)

Without in-depth understanding of SCSI layer and the Marvell controller,
I suspect this happens because when the link goes down (because of an
error) we schedule scsi_rescan_device() which again fails to read VPD
data... ad infinitum.

Since VPD data cannot be read from the device anyway we prevent the SCSI
layer from even trying by blacklisting the device. This gets away the
error and the system starts up normally.

[mkp: Widened the match to all revisions of this device]

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/scsi/scsi_devinfo.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 262ab837a704..8790e8640acd 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -205,6 +205,7 @@ static struct {
 	{"Intel", "Multi-Flex", NULL, BLIST_NO_RSOC},
 	{"iRiver", "iFP Mass Driver", NULL, BLIST_NOT_LOCKABLE | BLIST_INQUIRY_36},
 	{"LASOUND", "CDX7405", "3.10", BLIST_MAX5LUN | BLIST_SINGLELUN},
+	{"Marvell", "Console", NULL, BLIST_SKIP_VPD_PAGES},
 	{"MATSHITA", "PD-1", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
 	{"MATSHITA", "DMC-LC5", NULL, BLIST_NOT_LOCKABLE | BLIST_INQUIRY_36},
 	{"MATSHITA", "DMC-LC40", NULL, BLIST_NOT_LOCKABLE | BLIST_INQUIRY_36},
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341728 — [PATCH 3.12 141/142] libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct

From: "Darrick J. Wong" <darrick.wong@oracle.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 96f859d52bcb1c6ea6f3388d39862bf7143e2f30 upstream.

Because struct xfs_agfl is 36 bytes long and has a 64-bit integer
inside it, gcc will quietly round the structure size up to the nearest
64 bits -- in this case, 40 bytes.  This results in the XFS_AGFL_SIZE
macro returning incorrect results for v5 filesystems on 64-bit
machines (118 items instead of 119).  As a result, a 32-bit xfs_repair
will see garbage in AGFL item 119 and complain.

Therefore, tell gcc not to pad the structure so that the AGFL size
calculation is correct.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/xfs/xfs_ag.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h
index 1cb740afd674..78ec58fc282e 100644
--- a/fs/xfs/xfs_ag.h
+++ b/fs/xfs/xfs_ag.h
@@ -224,7 +224,7 @@ typedef struct xfs_agfl {
 	__be64		agfl_lsn;
 	__be32		agfl_crc;
 	__be32		agfl_bno[];	/* actually XFS_AGFL_SIZE(mp) */
-} xfs_agfl_t;
+} __attribute__((packed)) xfs_agfl_t;
 
 /*
  * tags for inode radix tree
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341732 — [PATCH 3.12 130/142] xhci: Fix list corruption in urb dequeue at host removal

From: Mathias Nyman <mathias.nyman@linux.intel.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 5c82171167adb8e4ac77b91a42cd49fb211a81a0 upstream.

xhci driver frees data for all devices, both usb2 and and usb3 the
first time usb_remove_hcd() is called, including td_list and and xhci_ring
structures.

When usb_remove_hcd() is called a second time for the second xhci bus it
will try to dequeue all pending urbs, and touches td_list which is already
freed for that endpoint.

Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/host/xhci.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index dfcf0a3527b8..806ed2ba1c6e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1522,7 +1522,9 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 		xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
 				"HW died, freeing TD.");
 		urb_priv = urb->hcpriv;
-		for (i = urb_priv->td_cnt; i < urb_priv->length; i++) {
+		for (i = urb_priv->td_cnt;
+		     i < urb_priv->length && xhci->devs[urb->dev->slot_id];
+		     i++) {
 			td = urb_priv->td[i];
 			if (!list_empty(&td->td_list))
 				list_del_init(&td->td_list);
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341733 — [PATCH 3.12 137/142] dump_stack: avoid potential deadlocks

From: Eric Dumazet <edumazet@google.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit d7ce36924344ace0dbdc855b1206cacc46b36d45 upstream.

Some servers experienced fatal deadlocks because of a combination of
bugs, leading to multiple cpus calling dump_stack().

The checksumming bug was fixed in commit 34ae6a1aa054 ("ipv6: update
skb->csum when CE mark is propagated").

The second problem is a faulty locking in dump_stack()

CPU1 runs in process context and calls dump_stack(), grabs dump_lock.

   CPU2 receives a TCP packet under softirq, grabs socket spinlock, and
   call dump_stack() from netdev_rx_csum_fault().

   dump_stack() spins on atomic_cmpxchg(&dump_lock, -1, 2), since
   dump_lock is owned by CPU1

While dumping its stack, CPU1 is interrupted by a softirq, and happens
to process a packet for the TCP socket locked by CPU2.

CPU1 spins forever in spin_lock() : deadlock

Stack trace on CPU1 looked like :

    NMI backtrace for cpu 1
    RIP: _raw_spin_lock+0x25/0x30
    ...
    Call Trace:
      <IRQ>
      tcp_v6_rcv+0x243/0x620
      ip6_input_finish+0x11f/0x330
      ip6_input+0x38/0x40
      ip6_rcv_finish+0x3c/0x90
      ipv6_rcv+0x2a9/0x500
      process_backlog+0x461/0xaa0
      net_rx_action+0x147/0x430
      __do_softirq+0x167/0x2d0
      call_softirq+0x1c/0x30
      do_softirq+0x3f/0x80
      irq_exit+0x6e/0xc0
      smp_call_function_single_interrupt+0x35/0x40
      call_function_single_interrupt+0x6a/0x70
      <EOI>
      printk+0x4d/0x4f
      printk_address+0x31/0x33
      print_trace_address+0x33/0x3c
      print_context_stack+0x7f/0x119
      dump_trace+0x26b/0x28e
      show_trace_log_lvl+0x4f/0x5c
      show_stack_log_lvl+0x104/0x113
      show_stack+0x42/0x44
      dump_stack+0x46/0x58
      netdev_rx_csum_fault+0x38/0x3c
      __skb_checksum_complete_head+0x6e/0x80
      __skb_checksum_complete+0x11/0x20
      tcp_rcv_established+0x2bd5/0x2fd0
      tcp_v6_do_rcv+0x13c/0x620
      sk_backlog_rcv+0x15/0x30
      release_sock+0xd2/0x150
      tcp_recvmsg+0x1c1/0xfc0
      inet_recvmsg+0x7d/0x90
      sock_recvmsg+0xaf/0xe0
      ___sys_recvmsg+0x111/0x3b0
      SyS_recvmsg+0x5c/0xb0
      system_call_fastpath+0x16/0x1b

Fixes: b58d977432c8 ("dump_stack: serialize the output from dump_stack()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 lib/dump_stack.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/lib/dump_stack.c b/lib/dump_stack.c
index f23b63f0a1c3..1e21b4682666 100644
--- a/lib/dump_stack.c
+++ b/lib/dump_stack.c
@@ -25,6 +25,7 @@ static atomic_t dump_lock = ATOMIC_INIT(-1);
 
 asmlinkage void dump_stack(void)
 {
+	unsigned long flags;
 	int was_locked;
 	int old;
 	int cpu;
@@ -33,9 +34,8 @@ asmlinkage void dump_stack(void)
 	 * Permit this cpu to perform nested stack dumps while serialising
 	 * against other CPUs
 	 */
-	preempt_disable();
-
 retry:
+	local_irq_save(flags);
 	cpu = smp_processor_id();
 	old = atomic_cmpxchg(&dump_lock, -1, cpu);
 	if (old == -1) {
@@ -43,6 +43,7 @@ retry:
 	} else if (old == cpu) {
 		was_locked = 1;
 	} else {
+		local_irq_restore(flags);
 		cpu_relax();
 		goto retry;
 	}
@@ -52,7 +53,7 @@ retry:
 	if (!was_locked)
 		atomic_set(&dump_lock, -1);
 
-	preempt_enable();
+	local_irq_restore(flags);
 }
 #else
 asmlinkage void dump_stack(void)
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341736 — [PATCH 3.12 133/142] scripts/bloat-o-meter: fix python3 syntax error

From: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 72214a24a7677d4c7501eecc9517ed681b5f2db2 upstream.

In Python3+ print is a function so the old syntax is not correct
anymore:

  $ ./scripts/bloat-o-meter vmlinux.o vmlinux.o.old
    File "./scripts/bloat-o-meter", line 61
      print "add/remove: %s/%s grow/shrink: %s/%s up/down: %s/%s (%s)" % \
                                                                     ^
  SyntaxError: invalid syntax

Fix by calling print as a function.

Tested on python 2.7.11, 3.5.1

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 scripts/bloat-o-meter | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/scripts/bloat-o-meter b/scripts/bloat-o-meter
index 6129020c41a9..81228a443122 100755
--- a/scripts/bloat-o-meter
+++ b/scripts/bloat-o-meter
@@ -55,8 +55,8 @@ for name in common:
 delta.sort()
 delta.reverse()
 
-print "add/remove: %s/%s grow/shrink: %s/%s up/down: %s/%s (%s)" % \
-      (add, remove, grow, shrink, up, -down, up-down)
-print "%-40s %7s %7s %+7s" % ("function", "old", "new", "delta")
+print("add/remove: %s/%s grow/shrink: %s/%s up/down: %s/%s (%s)" % \
+      (add, remove, grow, shrink, up, -down, up-down))
+print("%-40s %7s %7s %+7s" % ("function", "old", "new", "delta"))
 for d, n in delta:
-    if d: print "%-40s %7s %7s %+7d" % (n, old.get(n,"-"), new.get(n,"-"), d)
+    if d: print("%-40s %7s %7s %+7d" % (n, old.get(n,"-"), new.get(n,"-"), d))
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341737 — [PATCH 3.12 106/142] iio: lpc32xx_adc: fix warnings caused by enabling unprepared clock

From: Vladimir Zapolskiy <vz@mleia.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 01bb70ae0b98d266fa3e860482c7ce22fa482a6e upstream.

If common clock framework is configured, the driver generates a warning,
which is fixed by this change:

    root@devkit3250:~# cat /sys/bus/iio/devices/iio\:device0/in_voltage0_raw
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 724 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4()
    Modules linked in: sc16is7xx snd_soc_uda1380
    CPU: 0 PID: 724 Comm: cat Not tainted 4.3.0-rc2+ #198
    Hardware name: LPC32XX SoC (Flattened Device Tree)
    Backtrace:
    [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c)
    [<>] (show_stack) from [<>] (dump_stack+0x20/0x28)
    [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8)
    [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c)
    [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4)
    [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38)
    [<>] (clk_enable) from [<>] (lpc32xx_read_raw+0x38/0x80)
    [<>] (lpc32xx_read_raw) from [<>] (iio_read_channel_info+0x70/0x94)
    [<>] (iio_read_channel_info) from [<>] (dev_attr_show+0x28/0x4c)
    [<>] (dev_attr_show) from [<>] (sysfs_kf_seq_show+0x8c/0xf0)
    [<>] (sysfs_kf_seq_show) from [<>] (kernfs_seq_show+0x2c/0x30)
    [<>] (kernfs_seq_show) from [<>] (seq_read+0x1c8/0x440)
    [<>] (seq_read) from [<>] (kernfs_fop_read+0x38/0x170)
    [<>] (kernfs_fop_read) from [<>] (do_readv_writev+0x16c/0x238)
    [<>] (do_readv_writev) from [<>] (vfs_readv+0x50/0x58)
    [<>] (vfs_readv) from [<>] (default_file_splice_read+0x1a4/0x308)
    [<>] (default_file_splice_read) from [<>] (do_splice_to+0x78/0x84)
    [<>] (do_splice_to) from [<>] (splice_direct_to_actor+0xc8/0x1cc)
    [<>] (splice_direct_to_actor) from [<>] (do_splice_direct+0xa0/0xb8)
    [<>] (do_splice_direct) from [<>] (do_sendfile+0x1a8/0x30c)
    [<>] (do_sendfile) from [<>] (SyS_sendfile64+0x104/0x10c)
    [<>] (SyS_sendfile64) from [<>] (ret_fast_syscall+0x0/0x38)

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/staging/iio/adc/lpc32xx_adc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/iio/adc/lpc32xx_adc.c b/drivers/staging/iio/adc/lpc32xx_adc.c
index 9a4bb0999b51..a67f5a056677 100644
--- a/drivers/staging/iio/adc/lpc32xx_adc.c
+++ b/drivers/staging/iio/adc/lpc32xx_adc.c
@@ -76,7 +76,7 @@ static int lpc32xx_read_raw(struct iio_dev *indio_dev,
 
 	if (mask == IIO_CHAN_INFO_RAW) {
 		mutex_lock(&indio_dev->mlock);
-		clk_enable(info->clk);
+		clk_prepare_enable(info->clk);
 		/* Measurement setup */
 		__raw_writel(AD_INTERNAL | (chan->address) | AD_REFp | AD_REFm,
 			LPC32XX_ADC_SELECT(info->adc_base));
@@ -84,7 +84,7 @@ static int lpc32xx_read_raw(struct iio_dev *indio_dev,
 		__raw_writel(AD_PDN_CTRL | AD_STROBE,
 			LPC32XX_ADC_CTRL(info->adc_base));
 		wait_for_completion(&info->completion); /* set by ISR */
-		clk_disable(info->clk);
+		clk_disable_unprepare(info->clk);
 		*val = info->value;
 		mutex_unlock(&indio_dev->mlock);
 
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341739 — [PATCH 3.12 138/142] intel_scu_ipcutil: underflow in scu_reg_access()

From: Dan Carpenter <dan.carpenter@oracle.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit b1d353ad3d5835b16724653b33c05124e1b5acf1 upstream.

"count" is controlled by the user and it can be negative.  Let's prevent
that by making it unsigned.  You have to have CAP_SYS_RAWIO to call this
function so the bug is not as serious as it could be.

Fixes: 5369c02d951a ('intel_scu_ipc: Utility driver for intel scu ipc')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/platform/x86/intel_scu_ipcutil.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/x86/intel_scu_ipcutil.c b/drivers/platform/x86/intel_scu_ipcutil.c
index 02bc5a6343c3..aa454241489c 100644
--- a/drivers/platform/x86/intel_scu_ipcutil.c
+++ b/drivers/platform/x86/intel_scu_ipcutil.c
@@ -49,7 +49,7 @@ struct scu_ipc_data {
 
 static int scu_reg_access(u32 cmd, struct scu_ipc_data  *data)
 {
-	int count = data->count;
+	unsigned int count = data->count;
 
 	if (count == 0 || count == 3 || count > 4)
 		return -EINVAL;
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341741 — [PATCH 3.12 125/142] Input: elantech - add Fujitsu Lifebook U745 to force crc_enabled

From: Takashi Iwai <tiwai@suse.de>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 60603950f836ef4e88daddf61a273b91e671db2d upstream.

Another Lifebook machine that needs the same quirk as other similar
models to make the driver working.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=883192
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/input/mouse/elantech.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 65945db35377..88289c360a80 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1419,6 +1419,13 @@ static const struct dmi_system_id no_hw_res_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "U2442"),
 		},
 	},
+	{
+		/* Fujitsu LIFEBOOK U745 does not work with crc_enabled == 0 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U745"),
+		},
+	},
 #endif
 	{ }
 };
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341742 — [PATCH 3.12 135/142] radix-tree: fix race in gang lookup

From: Matthew Wilcox <willy@linux.intel.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 46437f9a554fbe3e110580ca08ab703b59f2f95a upstream.

If the indirect_ptr bit is set on a slot, that indicates we need to redo
the lookup.  Introduce a new function radix_tree_iter_retry() which
forces the loop to retry the lookup by setting 'slot' to NULL and
turning the iterator back to point at the problematic entry.

This is a pretty rare problem to hit at the moment; the lookup has to
race with a grow of the radix tree from a height of 0.  The consequences
of hitting this race are that gang lookup could return a pointer to a
radix_tree_node instead of a pointer to whatever the user had inserted
in the tree.

Fixes: cebbd29e1c2f ("radix-tree: rewrite gang lookup using iterator")
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 include/linux/radix-tree.h | 16 ++++++++++++++++
 lib/radix-tree.c           | 12 ++++++++++--
 2 files changed, 26 insertions(+), 2 deletions(-)

diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h
index e8be53ecfc45..3c2ce3cdd16a 100644
--- a/include/linux/radix-tree.h
+++ b/include/linux/radix-tree.h
@@ -320,6 +320,22 @@ void **radix_tree_next_chunk(struct radix_tree_root *root,
 			     struct radix_tree_iter *iter, unsigned flags);
 
 /**
+ * radix_tree_iter_retry - retry this chunk of the iteration
+ * @iter:	iterator state
+ *
+ * If we iterate over a tree protected only by the RCU lock, a race
+ * against deletion or creation may result in seeing a slot for which
+ * radix_tree_deref_retry() returns true.  If so, call this function
+ * and continue the iteration.
+ */
+static inline __must_check
+void **radix_tree_iter_retry(struct radix_tree_iter *iter)
+{
+	iter->next_index = iter->index;
+	return NULL;
+}
+
+/**
  * radix_tree_chunk_size - get current chunk size
  *
  * @iter:	pointer to radix tree iterator
diff --git a/lib/radix-tree.c b/lib/radix-tree.c
index e8adb5d8a184..50a9a1c155d3 100644
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -977,9 +977,13 @@ radix_tree_gang_lookup(struct radix_tree_root *root, void **results,
 		return 0;
 
 	radix_tree_for_each_slot(slot, root, &iter, first_index) {
-		results[ret] = indirect_to_ptr(rcu_dereference_raw(*slot));
+		results[ret] = rcu_dereference_raw(*slot);
 		if (!results[ret])
 			continue;
+		if (radix_tree_is_indirect_ptr(results[ret])) {
+			slot = radix_tree_iter_retry(&iter);
+			continue;
+		}
 		if (++ret == max_items)
 			break;
 	}
@@ -1056,9 +1060,13 @@ radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results,
 		return 0;
 
 	radix_tree_for_each_tagged(slot, root, &iter, first_index, tag) {
-		results[ret] = indirect_to_ptr(rcu_dereference_raw(*slot));
+		results[ret] = rcu_dereference_raw(*slot);
 		if (!results[ret])
 			continue;
+		if (radix_tree_is_indirect_ptr(results[ret])) {
+			slot = radix_tree_iter_retry(&iter);
+			continue;
+		}
 		if (++ret == max_items)
 			break;
 	}
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341743 — [PATCH 3.12 129/142] mm/memory_hotplug.c: check for missing sections in test_pages_in_a_zone()

From: Andrew Banman <abanman@sgi.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 5f0f2887f4de9508dcf438deab28f1de8070c271 upstream.

test_pages_in_a_zone() does not account for the possibility of missing
sections in the given pfn range.  pfn_valid_within always returns 1 when
CONFIG_HOLES_IN_ZONE is not set, allowing invalid pfns from missing
sections to pass the test, leading to a kernel oops.

Wrap an additional pfn loop with PAGES_PER_SECTION granularity to check
for missing sections before proceeding into the zone-check code.

This also prevents a crash from offlining memory devices with missing
sections.  Despite this, it may be a good idea to keep the related patch
'[PATCH 3/3] drivers: memory: prohibit offlining of memory blocks with
missing sections' because missing sections in a memory block may lead to
other problems not covered by the scope of this fix.

Signed-off-by: Andrew Banman <abanman@sgi.com>
Acked-by: Alex Thorlton <athorlton@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 mm/memory_hotplug.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index efeb4871b7e3..723978c6f8ab 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1209,23 +1209,30 @@ int is_mem_section_removable(unsigned long start_pfn, unsigned long nr_pages)
  */
 static int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn)
 {
-	unsigned long pfn;
+	unsigned long pfn, sec_end_pfn;
 	struct zone *zone = NULL;
 	struct page *page;
 	int i;
-	for (pfn = start_pfn;
+	for (pfn = start_pfn, sec_end_pfn = SECTION_ALIGN_UP(start_pfn);
 	     pfn < end_pfn;
-	     pfn += MAX_ORDER_NR_PAGES) {
-		i = 0;
-		/* This is just a CONFIG_HOLES_IN_ZONE check.*/
-		while ((i < MAX_ORDER_NR_PAGES) && !pfn_valid_within(pfn + i))
-			i++;
-		if (i == MAX_ORDER_NR_PAGES)
+	     pfn = sec_end_pfn + 1, sec_end_pfn += PAGES_PER_SECTION) {
+		/* Make sure the memory section is present first */
+		if (!present_section_nr(pfn_to_section_nr(pfn)))
 			continue;
-		page = pfn_to_page(pfn + i);
-		if (zone && page_zone(page) != zone)
-			return 0;
-		zone = page_zone(page);
+		for (; pfn < sec_end_pfn && pfn < end_pfn;
+		     pfn += MAX_ORDER_NR_PAGES) {
+			i = 0;
+			/* This is just a CONFIG_HOLES_IN_ZONE check.*/
+			while ((i < MAX_ORDER_NR_PAGES) &&
+				!pfn_valid_within(pfn + i))
+				i++;
+			if (i == MAX_ORDER_NR_PAGES)
+				continue;
+			page = pfn_to_page(pfn + i);
+			if (zone && page_zone(page) != zone)
+				return 0;
+			zone = page_zone(page);
+		}
 	}
 	return 1;
 }
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341744 — [PATCH 3.12 127/142] Input: i8042 - add Fujitsu Lifebook U745 to the nomux list

From: Aurélien Francillon <aurelien@francillon.net>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit dd0d0d4de582a6a61c032332c91f4f4cb2bab569 upstream.

Without i8042.nomux=1 the Elantech touch pad is not working at all on
a Fujitsu Lifebook U745. This patch does not seem necessary for all
U745 (maybe because of different BIOS versions?). However, it was
verified that the patch does not break those (see opensuse bug 883192:
https://bugzilla.opensuse.org/show_bug.cgi?id=883192).

Signed-off-by: Aurélien Francillon <aurelien@francillon.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/input/serio/i8042-x86ia64io.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 0254ed97c16e..d9ab5c5e8e82 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -258,6 +258,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 		},
 	},
 	{
+		/* Fujitsu Lifebook U745 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U745"),
+		},
+	},
+	{
 		/* Fujitsu T70H */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341745 — [PATCH 3.12 126/142] Input: elantech - mark protocols v2 and v3 as semi-mt

From: Benjamin Tissoires <benjamin.tissoires@redhat.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 6544a1df11c48c8413071aac3316792e4678fbfb upstream.

When using a protocol v2 or v3 hardware, elantech uses the function
elantech_report_semi_mt_data() to report data. This devices are rather
creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid
touch is reported.

Anyway, userspace (libinput) is now confused by these (0,0) touches,
and detect them as palm, and rejects them.

Commit 3c0213d17a09 ("Input: elantech - fix semi-mt protocol for v3 HW")
was sufficient enough for xf86-input-synaptics and libinput before it has
palm rejection. Now we need to actually tell libinput that this device is
a semi-mt one and it should not rely on the actual values of the 2 touches.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/input/mouse/elantech.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 88289c360a80..cbe20b0099a2 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1113,7 +1113,7 @@ static int elantech_set_input_params(struct psmouse *psmouse)
 			input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
 					     ETP_WMAX_V2, 0, 0);
 		}
-		input_mt_init_slots(dev, 2, 0);
+		input_mt_init_slots(dev, 2, INPUT_MT_SEMI_MT);
 		input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
 		input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
 		break;
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341746 — [PATCH 3.12 120/142] ARM: 8519/1: ICST: try other dividends than 1

From: Linus Walleij <linus.walleij@linaro.org>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit e972c37459c813190461dabfeaac228e00aae259 upstream.

Since the dawn of time the ICST code has only supported divide
by one or hang in an eternal loop. Luckily we were always dividing
by one because the reference frequency for the systems using
the ICSTs is 24MHz and the [min,max] values for the PLL input
if [10,320] MHz for ICST307 and [6,200] for ICST525, so the loop
will always terminate immediately without assigning any divisor
for the reference frequency.

But for the code to make sense, let's insert the missing i++

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/arm/common/icst.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c
index 2dc6da70ae59..3b3e58b7ba74 100644
--- a/arch/arm/common/icst.c
+++ b/arch/arm/common/icst.c
@@ -58,6 +58,7 @@ icst_hz_to_vco(const struct icst_params *p, unsigned long freq)
 
 		if (f > p->vco_min && f <= p->vco_max)
 			break;
+		i++;
 	} while (i < 8);
 
 	if (i >= 8)
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341747 — [PATCH 3.12 132/142] dma-debug: switch check from _text to _stext

From: Laura Abbott <labbott@fedoraproject.org>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit ea535e418c01837d07b6c94e817540f50bfdadb0 upstream.

In include/asm-generic/sections.h:

  /*
   * Usage guidelines:
   * _text, _data: architecture specific, don't use them in
   * arch-independent code
   * [_stext, _etext]: contains .text.* sections, may also contain
   * .rodata.*
   *                   and/or .init.* sections

_text is not guaranteed across architectures.  Architectures such as ARM
may reuse parts which are not actually text and erroneously trigger a bug.
Switch to using _stext which is guaranteed to contain text sections.

Came out of https://lkml.kernel.org/g/<567B1176.4000106@redhat.com>

Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 lib/dma-debug.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index d87a17a819d0..eb43517bf261 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -962,7 +962,7 @@ static inline bool overlap(void *addr, unsigned long len, void *start, void *end
 
 static void check_for_illegal_area(struct device *dev, void *addr, unsigned long len)
 {
-	if (overlap(addr, len, _text, _etext) ||
+	if (overlap(addr, len, _stext, _etext) ||
 	    overlap(addr, len, __start_rodata, __end_rodata))
 		err_printk(dev, NULL, "DMA-API: device driver maps memory from kernel text or rodata [addr=%p] [len=%lu]\n", addr, len);
 }
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341748 — [PATCH 3.12 128/142] iommu/vt-d: Fix 64-bit accesses to 32-bit DMAR_GSTS_REG

From: CQ Tang <cq.tang@intel.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit fda3bec12d0979aae3f02ee645913d66fbc8a26e upstream.

This is a 32-bit register. Apparently harmless on real hardware, but
causing justified warnings in simulation.

Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/iommu/dmar.c                | 2 +-
 drivers/iommu/intel_irq_remapping.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
index 785675a56a10..ba5d1a37a90d 100644
--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -972,7 +972,7 @@ void dmar_disable_qi(struct intel_iommu *iommu)
 
 	raw_spin_lock_irqsave(&iommu->register_lock, flags);
 
-	sts =  dmar_readq(iommu->reg + DMAR_GSTS_REG);
+	sts =  readl(iommu->reg + DMAR_GSTS_REG);
 	if (!(sts & DMA_GSTS_QIES))
 		goto end;
 
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index b97d70b1abe0..0ff40be0f3b2 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -495,7 +495,7 @@ static void iommu_disable_irq_remapping(struct intel_iommu *iommu)
 
 	raw_spin_lock_irqsave(&iommu->register_lock, flags);
 
-	sts = dmar_readq(iommu->reg + DMAR_GSTS_REG);
+	sts = readl(iommu->reg + DMAR_GSTS_REG);
 	if (!(sts & DMA_GSTS_IRES))
 		goto end;
 
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341750 — [PATCH 3.12 134/142] memcg: only free spare array when readers are done

From: Martijn Coenen <maco@google.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 6611d8d76132f86faa501de9451a89bf23fb2371 upstream.

A spare array holding mem cgroup threshold events is kept around to make
sure we can always safely deregister an event and have an array to store
the new set of events in.

In the scenario where we're going from 1 to 0 registered events, the
pointer to the primary array containing 1 event is copied to the spare
slot, and then the spare slot is freed because no events are left.
However, it is freed before calling synchronize_rcu(), which means
readers may still be accessing threshold->primary after it is freed.

Fixed by only freeing after synchronize_rcu().

Signed-off-by: Martijn Coenen <maco@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 mm/memcontrol.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index ff648969e402..5904fc833523 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -5830,16 +5830,17 @@ static void mem_cgroup_usage_unregister_event(struct cgroup_subsys_state *css,
 swap_buffers:
 	/* Swap primary and spare array */
 	thresholds->spare = thresholds->primary;
-	/* If all events are unregistered, free the spare array */
-	if (!new) {
-		kfree(thresholds->spare);
-		thresholds->spare = NULL;
-	}
 
 	rcu_assign_pointer(thresholds->primary, new);
 
 	/* To be sure that nobody uses thresholds */
 	synchronize_rcu();
+
+	/* If all events are unregistered, free the spare array */
+	if (!new) {
+		kfree(thresholds->spare);
+		thresholds->spare = NULL;
+	}
 unlock:
 	mutex_unlock(&memcg->thresholds_lock);
 }
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341752 — [PATCH 3.12 119/142] ARM: 8471/1: need to save/restore arm register(r11) when it is corrupted

From: Anson Huang <Anson.Huang@freescale.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit fa0708b320f6da4c1104fe56e01b7abf66fd16ad upstream.

In cpu_v7_do_suspend routine, r11 is used while it is NOT
saved/restored, different compiler may have different usage
of ARM general registers, so it may cause issues during
calling cpu_v7_do_suspend.

We meet kernel fault occurs when using GCC 4.8.3, r11 contains
valid value before calling into cpu_v7_do_suspend, but when returned
from this routine, r11 is corrupted and lead to kernel fault.
Doing save/restore for those corrupted registers is a must in
assemble code.

Signed-off-by: Anson Huang <Anson.Huang@freescale.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/arm/mm/proc-v7.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 2e381582ffee..8a03e9a31a3f 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -95,7 +95,7 @@ ENDPROC(cpu_v7_dcache_clean_area)
 .equ	cpu_v7_suspend_size, 4 * 8
 #ifdef CONFIG_ARM_CPU_SUSPEND
 ENTRY(cpu_v7_do_suspend)
-	stmfd	sp!, {r4 - r10, lr}
+	stmfd	sp!, {r4 - r11, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
 	mrc	p15, 0, r5, c13, c0, 3	@ User r/o thread ID
 	stmia	r0!, {r4 - r5}
@@ -108,7 +108,7 @@ ENTRY(cpu_v7_do_suspend)
 	mrc	p15, 0, r9, c1, c0, 1	@ Auxiliary control register
 	mrc	p15, 0, r10, c1, c0, 2	@ Co-processor access control
 	stmia	r0, {r6 - r11}
-	ldmfd	sp!, {r4 - r10, pc}
+	ldmfd	sp!, {r4 - r11, pc}
 ENDPROC(cpu_v7_do_suspend)
 
 ENTRY(cpu_v7_do_resume)
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

#1341753 — [PATCH 3.12 105/142] iio:ad7793: Fix ad7785 product ID

From: Lars-Peter Clausen <lars@metafoo.de>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 785171fd6cd7dcd7ada5a733b6a2d44ec566c3a0 upstream.

While the datasheet for the AD7785 lists 0xXB as the product ID the actual
product ID is 0xX3.

Fix the product ID otherwise the driver will reject the device due to non
matching IDs.

Fixes: e786cc26dcc5 ("staging:iio:ad7793: Implement stricter id checking")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/iio/adc/ad7793.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
index 4dddeabdfbb0..5da07546e182 100644
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -101,7 +101,7 @@
 #define AD7795_CH_AIN1M_AIN1M	8 /* AIN1(-) - AIN1(-) */
 
 /* ID Register Bit Designations (AD7793_REG_ID) */
-#define AD7785_ID		0xB
+#define AD7785_ID		0x3
 #define AD7792_ID		0xA
 #define AD7793_ID		0xB
 #define AD7794_ID		0xF
-- 
2.7.1

[toc] | [prev] | [next] | [standalone]

Page 1 of 7  [1] 2 3 4 5 6 7  Next page →

Back to top | Article view | linux.kernel

csiph-web