Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1338739 > unrolled thread

[PATCH 0/3] thermal: hisilicon: enable power allocator for Hi6220

Back to article view | Back to linux.kernel

Contents

  [PATCH 0/3] thermal: hisilicon: enable power allocator for Hi6220 Leo Yan <leo.yan@linaro.org> - 2016-02-20 17:00 +0100
    [PATCH 2/3] arm64: dts: register Hi6220's thermal sensor Leo Yan <leo.yan@linaro.org> - 2016-02-20 17:00 +0100
    [PATCH 3/3] arm64: dts: register Hi6220's thermal zone for power allocator Leo Yan <leo.yan@linaro.org> - 2016-02-20 17:00 +0100
    [PATCH 1/3] thermal: hisilicon: support to use any sensor Leo Yan <leo.yan@linaro.org> - 2016-02-20 17:00 +0100

#1338739 — [PATCH 0/3] thermal: hisilicon: enable power allocator for Hi6220

Hi6220 has octa-core so it has quite high power consumption when run
benchmark and introduces high temperature for SoC. So need enable
thermal gover to control temperature and also cannot hurt much for
performance after impose cooling operations on CPU.

This patch series is to enable power allocator for Hi6220. The power
allocator just uses only one sensor, so patch 1 is to fix sensor driver
so let it can initialize driver successfully with only enabling one
sensor.

After profiling on Hikey, the power model has been simplized with only
dynamic coefficent, and now it's convienence to pass it from CPU node.
So patch 2 and 3 bind sensor and pass power model parameters.

This patch series have been tested on 96boards Hikey.


Leo Yan (3):
  thermal: hisilicon: support to use any sensor
  arm64: dts: register Hi6220's thermal sensor
  arm64: dts: register Hi6220's thermal zone for power allocator

 arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 45 +++++++++++++++++++++++++++++++
 drivers/thermal/hisi_thermal.c            | 33 ++++++++++++++---------
 2 files changed, 65 insertions(+), 13 deletions(-)

-- 
1.9.1

[toc] | [next] | [standalone]

#1338740 — [PATCH 2/3] arm64: dts: register Hi6220's thermal sensor

Bind thermal sensor driver for Hi6220.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index f588be9..50ba1b0 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -313,5 +313,14 @@
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <3>;
 		};
+
+		tsensor: tsensor@0,f7030700 {
+			compatible = "hisilicon,tsensor";
+			reg = <0x0 0xf7030700 0x0 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_ctrl 22>;
+			clock-names = "thermal_clk";
+			#thermal-sensor-cells = <1>;
+		};
 	};
 };
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1338741 — [PATCH 3/3] arm64: dts: register Hi6220's thermal zone for power allocator

With profiling Hi6220's power modeling so get dynamic coefficient and
sustainable power. So pass these parameters from DT.

Now enable power allocator wit only one actor for CPU part, so directly
use cluster0's thermal sensor for monitoring temperature.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 36 +++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 50ba1b0..3608a3e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -6,6 +6,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/hi6220-clock.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "hisilicon,hi6220";
@@ -87,6 +88,7 @@
 			cooling-max-level = <0>;
 			#cooling-cells = <2>; /* min followed by max */
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <311>;
 		};
 
 		cpu1: cpu@1 {
@@ -322,5 +324,39 @@
 			clock-names = "thermal_clk";
 			#thermal-sensor-cells = <1>;
 		};
+
+		thermal-zones {
+
+			cls0: cls0 {
+				polling-delay = <1000>;
+				polling-delay-passive = <100>;
+				sustainable-power = <3326>;
+
+				/* sensor ID */
+				thermal-sensors = <&tsensor 2>;
+
+				trips {
+					threshold: trip-point@0 {
+						temperature = <65000>;
+						hysteresis = <1000>;
+						type = "passive";
+					};
+
+					target: trip-point@1 {
+						temperature = <75000>;
+						hysteresis = <1000>;
+						type = "passive";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&target>;
+						contribution = <1024>;
+						cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
 	};
 };
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1338742 — [PATCH 1/3] thermal: hisilicon: support to use any sensor

In current code sensor driver registers all 4 sensors together and if
any of them has not bound to thermal zone successfully then driver will
return failure for driver's initialization. As a result, if DT binds
thermal zone with only one sensor, then the thermal driver will not work
well anymore.

So this patch is to fix this issue. It allows the thermal sensor driver
can register any number sensors at initialization phase, and fix up code
for other related code to skip related sensor's accessing if the sensor
has not been enabled in initialization phase.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 drivers/thermal/hisi_thermal.c | 33 ++++++++++++++++++++-------------
 1 file changed, 20 insertions(+), 13 deletions(-)

diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index 5e820b5..7a3e5d8 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -160,7 +160,7 @@ static int hisi_thermal_get_temp(void *_sensor, int *temp)
 	struct hisi_thermal_sensor *sensor = _sensor;
 	struct hisi_thermal_data *data = sensor->thermal;
 
-	int sensor_id = 0, i;
+	int sensor_id = -1, i;
 	long max_temp = 0;
 
 	*temp = hisi_thermal_get_sensor_temp(data, sensor);
@@ -168,12 +168,19 @@ static int hisi_thermal_get_temp(void *_sensor, int *temp)
 	sensor->sensor_temp = *temp;
 
 	for (i = 0; i < HISI_MAX_SENSORS; i++) {
+		if (!data->sensors[i].tzd)
+			continue;
+
 		if (data->sensors[i].sensor_temp >= max_temp) {
 			max_temp = data->sensors[i].sensor_temp;
 			sensor_id = i;
 		}
 	}
 
+	/* If no sensor has been enabled, then skip to enable irq */
+	if (sensor_id == -1)
+		return 0;
+
 	mutex_lock(&data->thermal_lock);
 	data->irq_bind_sensor = sensor_id;
 	mutex_unlock(&data->thermal_lock);
@@ -226,8 +233,12 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
 		 sensor->thres_temp / 1000);
 	mutex_unlock(&data->thermal_lock);
 
-	for (i = 0; i < HISI_MAX_SENSORS; i++)
+	for (i = 0; i < HISI_MAX_SENSORS; i++) {
+		if (!data->sensors[i].tzd)
+			continue;
+
 		thermal_zone_device_update(data->sensors[i].tzd);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -247,6 +258,7 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev,
 				sensor, &hisi_of_thermal_ops);
 	if (IS_ERR(sensor->tzd)) {
 		ret = PTR_ERR(sensor->tzd);
+		sensor->tzd = NULL;
 		dev_err(&pdev->dev, "failed to register sensor id %d: %d\n",
 			sensor->id, ret);
 		return ret;
@@ -334,25 +346,17 @@ static int hisi_thermal_probe(struct platform_device *pdev)
 	for (i = 0; i < HISI_MAX_SENSORS; ++i) {
 		ret = hisi_thermal_register_sensor(pdev, data,
 						   &data->sensors[i], i);
-		if (ret) {
+		if (ret)
 			dev_err(&pdev->dev,
 				"failed to register thermal sensor: %d\n", ret);
-			goto err_get_sensor_data;
-		}
+		else
+			hisi_thermal_toggle_sensor(&data->sensors[i], true);
 	}
 
 	hisi_thermal_enable_bind_irq_sensor(data);
 	data->irq_enabled = true;
 
-	for (i = 0; i < HISI_MAX_SENSORS; i++)
-		hisi_thermal_toggle_sensor(&data->sensors[i], true);
-
 	return 0;
-
-err_get_sensor_data:
-	clk_disable_unprepare(data->clk);
-
-	return ret;
 }
 
 static int hisi_thermal_remove(struct platform_device *pdev)
@@ -363,6 +367,9 @@ static int hisi_thermal_remove(struct platform_device *pdev)
 	for (i = 0; i < HISI_MAX_SENSORS; i++) {
 		struct hisi_thermal_sensor *sensor = &data->sensors[i];
 
+		if (!sensor->tzd)
+			continue;
+
 		hisi_thermal_toggle_sensor(sensor, false);
 		thermal_zone_of_sensor_unregister(&pdev->dev, sensor->tzd);
 	}
-- 
1.9.1

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web