Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1337297 > unrolled thread

Re: [PATCH v2] USB: option: add support for SIM7100E

Started byJohan Hovold <johan@kernel.org>
First post2016-02-18 13:00 +0100
Last post2016-02-18 13:00 +0100
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  Re: [PATCH v2] USB: option: add support for SIM7100E Johan Hovold <johan@kernel.org> - 2016-02-18 13:00 +0100

#1337297 — Re: [PATCH v2] USB: option: add support for SIM7100E

FromJohan Hovold <johan@kernel.org>
Date2016-02-18 13:00 +0100
SubjectRe: [PATCH v2] USB: option: add support for SIM7100E
Message-ID<r3vpx-4Wo-9@gated-at.bofh.it>
On Sun, Jan 31, 2016 at 09:13:19PM +0100, Johan Hovold wrote:
> On Fri, Jan 29, 2016 at 12:07:30AM +0300, Andrey Skvortsov wrote:
> > $ lsusb:
> > Bus 001 Device 101: ID 1e0e:9001 Qualcomm / Option
> > 
> > $ usb-devices:
> > T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=101 Spd=480  MxCh= 0
> > D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  2
> > P:  Vendor=1e0e ProdID=9001 Rev= 2.32
> > S:  Manufacturer=SimTech, Incorporated
> > S:  Product=SimTech, Incorporated
> > S:  SerialNumber=0123456789ABCDEF
> > C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
> > I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
> > I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> > I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> > I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> > I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> > I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
> > I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> > 
> > The last interface (6) is used for Android Composite ADB interface.
> > 
> > Serial port layout:
> > 0: QCDM/DIAG
> > 1: NMEA
> > 2: AT
> > 3: AT/PPP
> > 4: audio
> > 
> > Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
> > ---
> >  v2: respin v1 against usb-linus branch of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial.git
> >      move SIM7100E product id to ALINK entries
> >      move SIM7100E usb_device_id initialization to ALINK initializations
> 
> Thanks for respinning. I'll queue this one up for 4.5-rc.

Now applied, thanks.

Johan

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web