Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1337497 > unrolled thread

Re: [PATCH 3/3] ARM64: dts: mt8173: Add thermal/auxadc device nodes

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH 3/3] ARM64: dts: mt8173: Add thermal/auxadc device nodes Matthias Brugger <matthias.bgg@gmail.com> - 2016-02-18 17:20 +0100
    Re: [PATCH 3/3] ARM64: dts: mt8173: Add thermal/auxadc device nodes Sascha Hauer <s.hauer@pengutronix.de> - 2016-02-19 08:30 +0100

#1337497 — Re: [PATCH 3/3] ARM64: dts: mt8173: Add thermal/auxadc device nodes

Hi Sascha,

On 30/11/15 12:42, Sascha Hauer wrote:
> This adds the thermal controller and auxadc nodes to the Mediatek MT8173
> dtsi file.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
> ---
>   arch/arm64/boot/dts/mediatek/mt8173.dtsi | 17 +++++++++++++++++
>   1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index 06a1564..e2ddd03 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -277,6 +277,11 @@
>   				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>   		};
>
> +		auxadc: auxadc@11001000 {
> +			compatible = "mediatek,mt8173-auxadc";

Can you please write a small Documentation about the binding.
I suppose it will be mediatek,auxadc and mediatek,mt8173-auxadc.

I can't do it my self, as my datasheet lacks the auxadc registers.

Thanks,
Matthias

> +			reg = <0 0x11001000 0 0x1000>;
> +		};
> +
>   		uart0: serial@11002000 {
>   			compatible = "mediatek,mt8173-uart",
>   				     "mediatek,mt6577-uart";
> @@ -487,6 +492,18 @@
>   			clock-names = "source", "hclk";
>   			status = "disabled";
>   		};
> +
> +		thermal: thermal@1100b000 {
> +			#thermal-sensor-cells = <0>;
> +			compatible = "mediatek,mt8173-thermal";
> +			reg = <0 0x1100b000 0 0x1000>;
> +			interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
> +			clock-names = "therm", "auxadc";
> +			resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
> +			mediatek,auxadc = <&auxadc>;
> +			mediatek,apmixedsys = <&apmixedsys>;
> +		};
>   	};
>   };
>
>

[toc] | [next] | [standalone]

#1337940

Hi Matthias,

On Thu, Feb 18, 2016 at 05:18:49PM +0100, Matthias Brugger wrote:
> Hi Sascha,
> 
> On 30/11/15 12:42, Sascha Hauer wrote:
> >This adds the thermal controller and auxadc nodes to the Mediatek MT8173
> >dtsi file.
> >
> >Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> >Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
> >---
> >  arch/arm64/boot/dts/mediatek/mt8173.dtsi | 17 +++++++++++++++++
> >  1 file changed, 17 insertions(+)
> >
> >diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> >index 06a1564..e2ddd03 100644
> >--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> >+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> >@@ -277,6 +277,11 @@
> >  				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> >  		};
> >
> >+		auxadc: auxadc@11001000 {
> >+			compatible = "mediatek,mt8173-auxadc";
> 
> Can you please write a small Documentation about the binding.
> I suppose it will be mediatek,auxadc and mediatek,mt8173-auxadc.

Just did that.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web