Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1333414 > unrolled thread

Re: [PATCH] dts: ls102xa: ifc: Add the partition for NOR flash

Started byShawn Guo <shawnguo@kernel.org>
First post2016-02-14 04:50 +0100
Last post2016-02-17 09:00 +0100
Articles 2 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  Re: [PATCH] dts: ls102xa: ifc: Add the partition for NOR flash Shawn Guo <shawnguo@kernel.org> - 2016-02-14 04:50 +0100
    RE: [PATCH] dts: ls102xa: ifc: Add the partition for NOR flash Huan Wang <alison.wang@nxp.com> - 2016-02-17 09:00 +0100

#1333414 — Re: [PATCH] dts: ls102xa: ifc: Add the partition for NOR flash

FromShawn Guo <shawnguo@kernel.org>
Date2016-02-14 04:50 +0100
SubjectRe: [PATCH] dts: ls102xa: ifc: Add the partition for NOR flash
Message-ID<r1VR8-5IY-3@gated-at.bofh.it>
On Wed, Feb 03, 2016 at 04:16:44PM +0800, Alison Wang wrote:
> According to the new mapping table, the partition for NOR flash
> is added.

How do you know that everyone using the board wants the NOR flash to be
partitioned this way?  It's really a matter of software configuration
and may vary from system to system.

Shawn

> 
> Signed-off-by: Alison Wang <alison.wang@nxp.com>
> ---
>  arch/arm/boot/dts/ls1021a-qds.dts | 60 +++++++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/ls1021a-twr.dts | 60 +++++++++++++++++++++++++++++++++++++++
>  2 files changed, 120 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
> index 9408753..904ee09 100644
> --- a/arch/arm/boot/dts/ls1021a-qds.dts
> +++ b/arch/arm/boot/dts/ls1021a-qds.dts
> @@ -237,6 +237,66 @@
>  		reg = <0x0 0x0 0x8000000>;
>  		bank-width = <2>;
>  		device-width = <1>;
> +
> +		partition@0 {
> +			/* 128KB for bank0 RCW */
> +			reg = <0x00000000 0x00020000>;
> +			label = "NOR bank0 RCW Image";
> +		};
> +
> +		partition@100000 {
> +			/* 1MB for bank0 u-boot Image */
> +			reg = <0x00100000 0x00100000>;
> +			label = "NOR bank0 u-boot Image";
> +		};
> +
> +		partition@200000 {
> +			/* 1MB for bank0 DTB */
> +			reg = <0x00200000 0x00100000>;
> +			label = "NOR bank0 DTB Image";
> +		};
> +
> +		partition@300000 {
> +			/* 7MB for bank0 Linux Kernel */
> +			reg = <0x00300000 0x00700000>;
> +			label = "NOR bank0 Linux Kernel Image";
> +		};
> +
> +		partition@a00000 {
> +			/* 54MB for bank0 Ramdisk Root File System */
> +			reg = <0x00a00000 0x03600000>;
> +			label = "NOR bank0 Ramdisk Root File System Image";
> +		};
> +
> +		partition@4000000 {
> +			/* 128KB for bank4 RCW */
> +			reg = <0x04000000 0x00020000>;
> +			label = "NOR bank4 RCW Image";
> +		};
> +
> +		partition@4100000 {
> +			/* 1MB for bank4 u-boot Image */
> +			reg = <0x04100000 0x00100000>;
> +			label = "NOR bank4 u-boot Image";
> +		};
> +
> +		partition@4200000 {
> +			/* 1MB for bank4 DTB */
> +			reg = <0x04200000 0x00100000>;
> +			label = "NOR bank4 DTB Image";
> +		};
> +
> +		partition@4300000 {
> +			/* 7MB for bank4 Linux Kernel */
> +			reg = <0x04300000 0x00700000>;
> +			label = "NOR bank4 Linux Kernel Image";
> +		};
> +
> +		partition@4a00000 {
> +			/* 54MB for bank4 Ramdisk Root File System */
> +			reg = <0x04a00000 0x03600000>;
> +			label = "NOR bank4 Ramdisk Root File System Image";
> +		};
>  	};
>  
>  	fpga: board-control@3,0 {
> diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
> index 75ecaed..f5e9616 100644
> --- a/arch/arm/boot/dts/ls1021a-twr.dts
> +++ b/arch/arm/boot/dts/ls1021a-twr.dts
> @@ -194,6 +194,66 @@
>  		reg = <0x0 0x0 0x8000000>;
>  		bank-width = <2>;
>  		device-width = <1>;
> +
> +		partition@0 {
> +			/* 128KB for bank0 RCW */
> +			reg = <0x00000000 0x00020000>;
> +			label = "NOR bank0 RCW Image";
> +		};
> +
> +		partition@100000 {
> +			/* 1MB for bank0 u-boot Image */
> +			reg = <0x00100000 0x00100000>;
> +			label = "NOR bank0 u-boot Image";
> +		};
> +
> +		partition@200000 {
> +			/* 1MB for bank0 DTB */
> +			reg = <0x00200000 0x00100000>;
> +			label = "NOR bank0 DTB Image";
> +		};
> +
> +		partition@300000 {
> +			/* 7MB for bank0 Linux Kernel */
> +			reg = <0x00300000 0x00700000>;
> +			label = "NOR bank0 Linux Kernel Image";
> +		};
> +
> +		partition@a00000 {
> +			/* 54MB for bank0 Ramdisk Root File System */
> +			reg = <0x00a00000 0x03600000>;
> +			label = "NOR bank0 Ramdisk Root File System Image";
> +		};
> +
> +		partition@4000000 {
> +			/* 128KB for bank4 RCW */
> +			reg = <0x04000000 0x00020000>;
> +			label = "NOR bank4 RCW Image";
> +		};
> +
> +		partition@4100000 {
> +			/* 1MB for bank4 u-boot Image */
> +			reg = <0x04100000 0x00100000>;
> +			label = "NOR bank4 u-boot Image";
> +		};
> +
> +		partition@4200000 {
> +			/* 1MB for bank4 DTB */
> +			reg = <0x04200000 0x00100000>;
> +			label = "NOR bank4 DTB Image";
> +		};
> +
> +		partition@4300000 {
> +			/* 7MB for bank4 Linux Kernel */
> +			reg = <0x04300000 0x00700000>;
> +			label = "NOR bank4 Linux Kernel Image";
> +		};
> +
> +		partition@4a00000 {
> +			/* 54MB for bank4 Ramdisk Root File System */
> +			reg = <0x04a00000 0x03600000>;
> +			label = "NOR bank4 Ramdisk Root File System Image";
> +		};
>  	};
>  };
>  
> -- 
> 2.1.0.27.g96db324
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

[toc] | [next] | [standalone]


#1336116

FromHuan Wang <alison.wang@nxp.com>
Date2016-02-17 09:00 +0100
Message-ID<r35bI-3gB-9@gated-at.bofh.it>
In reply to#1333414
> On Wed, Feb 03, 2016 at 04:16:44PM +0800, Alison Wang wrote:
> > According to the new mapping table, the partition for NOR flash is
> > added.
> 
> How do you know that everyone using the board wants the NOR flash to be
> partitioned this way?  It's really a matter of software configuration
> and may vary from system to system.
>
[Alison Wang] Yes, the different partition could be used too. I just want to
provide one partition way.

Best Regards,
Alison Wang
> 
> >
> > Signed-off-by: Alison Wang <alison.wang@nxp.com>
> > ---
> >  arch/arm/boot/dts/ls1021a-qds.dts | 60
> > +++++++++++++++++++++++++++++++++++++++
> >  arch/arm/boot/dts/ls1021a-twr.dts | 60
> > +++++++++++++++++++++++++++++++++++++++
> >  2 files changed, 120 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/ls1021a-qds.dts
> > b/arch/arm/boot/dts/ls1021a-qds.dts
> > index 9408753..904ee09 100644
> > --- a/arch/arm/boot/dts/ls1021a-qds.dts
> > +++ b/arch/arm/boot/dts/ls1021a-qds.dts
> > @@ -237,6 +237,66 @@
> >  		reg = <0x0 0x0 0x8000000>;
> >  		bank-width = <2>;
> >  		device-width = <1>;
> > +
> > +		partition@0 {
> > +			/* 128KB for bank0 RCW */
> > +			reg = <0x00000000 0x00020000>;
> > +			label = "NOR bank0 RCW Image";
> > +		};
> > +
> > +		partition@100000 {
> > +			/* 1MB for bank0 u-boot Image */
> > +			reg = <0x00100000 0x00100000>;
> > +			label = "NOR bank0 u-boot Image";
> > +		};
> > +
> > +		partition@200000 {
> > +			/* 1MB for bank0 DTB */
> > +			reg = <0x00200000 0x00100000>;
> > +			label = "NOR bank0 DTB Image";
> > +		};
> > +
> > +		partition@300000 {
> > +			/* 7MB for bank0 Linux Kernel */
> > +			reg = <0x00300000 0x00700000>;
> > +			label = "NOR bank0 Linux Kernel Image";
> > +		};
> > +
> > +		partition@a00000 {
> > +			/* 54MB for bank0 Ramdisk Root File System */
> > +			reg = <0x00a00000 0x03600000>;
> > +			label = "NOR bank0 Ramdisk Root File System Image";
> > +		};
> > +
> > +		partition@4000000 {
> > +			/* 128KB for bank4 RCW */
> > +			reg = <0x04000000 0x00020000>;
> > +			label = "NOR bank4 RCW Image";
> > +		};
> > +
> > +		partition@4100000 {
> > +			/* 1MB for bank4 u-boot Image */
> > +			reg = <0x04100000 0x00100000>;
> > +			label = "NOR bank4 u-boot Image";
> > +		};
> > +
> > +		partition@4200000 {
> > +			/* 1MB for bank4 DTB */
> > +			reg = <0x04200000 0x00100000>;
> > +			label = "NOR bank4 DTB Image";
> > +		};
> > +
> > +		partition@4300000 {
> > +			/* 7MB for bank4 Linux Kernel */
> > +			reg = <0x04300000 0x00700000>;
> > +			label = "NOR bank4 Linux Kernel Image";
> > +		};
> > +
> > +		partition@4a00000 {
> > +			/* 54MB for bank4 Ramdisk Root File System */
> > +			reg = <0x04a00000 0x03600000>;
> > +			label = "NOR bank4 Ramdisk Root File System Image";
> > +		};
> >  	};
> >
> >  	fpga: board-control@3,0 {
> > diff --git a/arch/arm/boot/dts/ls1021a-twr.dts
> > b/arch/arm/boot/dts/ls1021a-twr.dts
> > index 75ecaed..f5e9616 100644
> > --- a/arch/arm/boot/dts/ls1021a-twr.dts
> > +++ b/arch/arm/boot/dts/ls1021a-twr.dts
> > @@ -194,6 +194,66 @@
> >  		reg = <0x0 0x0 0x8000000>;
> >  		bank-width = <2>;
> >  		device-width = <1>;
> > +
> > +		partition@0 {
> > +			/* 128KB for bank0 RCW */
> > +			reg = <0x00000000 0x00020000>;
> > +			label = "NOR bank0 RCW Image";
> > +		};
> > +
> > +		partition@100000 {
> > +			/* 1MB for bank0 u-boot Image */
> > +			reg = <0x00100000 0x00100000>;
> > +			label = "NOR bank0 u-boot Image";
> > +		};
> > +
> > +		partition@200000 {
> > +			/* 1MB for bank0 DTB */
> > +			reg = <0x00200000 0x00100000>;
> > +			label = "NOR bank0 DTB Image";
> > +		};
> > +
> > +		partition@300000 {
> > +			/* 7MB for bank0 Linux Kernel */
> > +			reg = <0x00300000 0x00700000>;
> > +			label = "NOR bank0 Linux Kernel Image";
> > +		};
> > +
> > +		partition@a00000 {
> > +			/* 54MB for bank0 Ramdisk Root File System */
> > +			reg = <0x00a00000 0x03600000>;
> > +			label = "NOR bank0 Ramdisk Root File System Image";
> > +		};
> > +
> > +		partition@4000000 {
> > +			/* 128KB for bank4 RCW */
> > +			reg = <0x04000000 0x00020000>;
> > +			label = "NOR bank4 RCW Image";
> > +		};
> > +
> > +		partition@4100000 {
> > +			/* 1MB for bank4 u-boot Image */
> > +			reg = <0x04100000 0x00100000>;
> > +			label = "NOR bank4 u-boot Image";
> > +		};
> > +
> > +		partition@4200000 {
> > +			/* 1MB for bank4 DTB */
> > +			reg = <0x04200000 0x00100000>;
> > +			label = "NOR bank4 DTB Image";
> > +		};
> > +
> > +		partition@4300000 {
> > +			/* 7MB for bank4 Linux Kernel */
> > +			reg = <0x04300000 0x00700000>;
> > +			label = "NOR bank4 Linux Kernel Image";
> > +		};
> > +
> > +		partition@4a00000 {
> > +			/* 54MB for bank4 Ramdisk Root File System */
> > +			reg = <0x04a00000 0x03600000>;
> > +			label = "NOR bank4 Ramdisk Root File System Image";
> > +		};
> >  	};
> >  };
> >
> > --
> > 2.1.0.27.g96db324
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> >

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web