Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1330577 > unrolled thread
| Started by | Javier Martinez Canillas <javier@osg.samsung.com> |
|---|---|
| First post | 2016-02-09 19:40 +0100 |
| Last post | 2016-02-16 15:00 +0100 |
| Articles | 6 — 3 participants |
Back to article view | Back to linux.kernel
[PATCH] ARM: dts: Move syscon reboot/poweroff to common dtsi for Exynos Javier Martinez Canillas <javier@osg.samsung.com> - 2016-02-09 19:40 +0100
Re: [PATCH] ARM: dts: Move syscon reboot/poweroff to common dtsi for Exynos Alim Akhtar <alim.akhtar@gmail.com> - 2016-02-10 16:00 +0100
Re: [PATCH] ARM: dts: Move syscon reboot/poweroff to common dtsi for Exynos Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-02-14 07:50 +0100
Re: [PATCH] ARM: dts: Move syscon reboot/poweroff to common dtsi for Exynos Javier Martinez Canillas <javier@osg.samsung.com> - 2016-02-15 14:40 +0100
Re: [PATCH] ARM: dts: Move syscon reboot/poweroff to common dtsi for Exynos Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-02-16 00:10 +0100
Re: [PATCH] ARM: dts: Move syscon reboot/poweroff to common dtsi for Exynos Javier Martinez Canillas <javier@osg.samsung.com> - 2016-02-16 15:00 +0100
| From | Javier Martinez Canillas <javier@osg.samsung.com> |
|---|---|
| Date | 2016-02-09 19:40 +0100 |
| Subject | [PATCH] ARM: dts: Move syscon reboot/poweroff to common dtsi for Exynos |
| Message-ID | <r0lmG-7Ti-1@gated-at.bofh.it> |
All Exynos SoCs have the same syscon reboot and poweroff device nodes so
there is no need to duplicate the same on each SoC dtsi and can be moved
to a common dtsi that can be included by all the SoCs dtsi files.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
Hello,
The patch was tested on an Exynos5800 Peach Pi Chromebook and an
Exynos5422 Odroid XU4 board. Reboot and poweroff worked for both.
But testing on Exynos3 and Exynos4 will be highly appreciated.
Best regards,
Javier
arch/arm/boot/dts/exynos-syscon-restart.dtsi | 23 +++++++++++++++++++++++
arch/arm/boot/dts/exynos3250.dtsi | 15 +--------------
arch/arm/boot/dts/exynos4.dtsi | 15 +--------------
arch/arm/boot/dts/exynos5.dtsi | 15 +--------------
arch/arm/boot/dts/exynos5410.dtsi | 15 +--------------
5 files changed, 27 insertions(+), 56 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos-syscon-restart.dtsi
diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
new file mode 100644
index 000000000000..2b8acf554881
--- /dev/null
+++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
@@ -0,0 +1,23 @@
+/*
+ * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* reset value */
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
+ };
+};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 18e3deffbf48..d9c221517935 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -19,6 +19,7 @@
#include "skeleton.dtsi"
#include "exynos4-cpu-thermal.dtsi"
+#include "exynos-syscon-restart.dtsi"
#include <dt-bindings/clock/exynos3250.h>
/ {
@@ -152,20 +153,6 @@
interrupt-parent = <&gic>;
};
- poweroff: syscon-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&pmu_system_controller>;
- offset = <0x330C>; /* PS_HOLD_CONTROL */
- mask = <0x5200>; /* Reset value */
- };
-
- reboot: syscon-reboot {
- compatible = "syscon-reboot";
- regmap = <&pmu_system_controller>;
- offset = <0x0400>; /* SWRESET */
- mask = <0x1>;
- };
-
mipi_phy: video-phy@10020710 {
compatible = "samsung,s5pv210-mipi-video-phy";
#phy-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index ca621a92319e..e6f6939ccdfa 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -21,6 +21,7 @@
#include <dt-bindings/clock/exynos4.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
+#include "exynos-syscon-restart.dtsi"
#include "skeleton.dtsi"
/ {
@@ -163,20 +164,6 @@
interrupt-parent = <&gic>;
};
- poweroff: syscon-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&pmu_system_controller>;
- offset = <0x330C>; /* PS_HOLD_CONTROL */
- mask = <0x5200>; /* reset value */
- };
-
- reboot: syscon-reboot {
- compatible = "syscon-reboot";
- regmap = <&pmu_system_controller>;
- offset = <0x0400>; /* SWRESET */
- mask = <0x1>;
- };
-
dsi_0: dsi@11C80000 {
compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x11C80000 0x10000>;
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index b61d1f637510..92313cac035e 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -14,6 +14,7 @@
*/
#include "skeleton.dtsi"
+#include "exynos-syscon-restart.dtsi"
/ {
interrupt-parent = <&gic>;
@@ -93,20 +94,6 @@
status = "disabled";
};
- poweroff: syscon-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&pmu_system_controller>;
- offset = <0x330C>; /* PS_HOLD_CONTROL */
- mask = <0x5200>; /* reset value */
- };
-
- reboot: syscon-reboot {
- compatible = "syscon-reboot";
- regmap = <&pmu_system_controller>;
- offset = <0x0400>; /* SWRESET */
- mask = <0x1>;
- };
-
fimd: fimd@14400000 {
compatible = "samsung,exynos5250-fimd";
interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index f3490f567344..fa558674ac76 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -14,6 +14,7 @@
*/
#include "skeleton.dtsi"
+#include "exynos-syscon-restart.dtsi"
#include <dt-bindings/clock/exynos5410.h>
/ {
@@ -117,20 +118,6 @@
reg = <0x10040000 0x5000>;
};
- poweroff: syscon-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&pmu_system_controller>;
- offset = <0x330C>; /* PS_HOLD_CONTROL */
- mask = <0x5200>; /* reset value */
- };
-
- reboot: syscon-reboot {
- compatible = "syscon-reboot";
- regmap = <&pmu_system_controller>;
- offset = <0x0400>; /* SWRESET */
- mask = <0x1>;
- };
-
mct: mct@101C0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0xB00>;
--
2.5.0
[toc] | [next] | [standalone]
| From | Alim Akhtar <alim.akhtar@gmail.com> |
|---|---|
| Date | 2016-02-10 16:00 +0100 |
| Message-ID | <r0Epj-3tO-3@gated-at.bofh.it> |
| In reply to | #1330577 |
Hi Javier,
On Wed, Feb 10, 2016 at 12:00 AM, Javier Martinez Canillas
<javier@osg.samsung.com> wrote:
> All Exynos SoCs have the same syscon reboot and poweroff device nodes so
> there is no need to duplicate the same on each SoC dtsi and can be moved
> to a common dtsi that can be included by all the SoCs dtsi files.
>
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
>
Looks good to me.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung,com>
> ---
> Hello,
>
> The patch was tested on an Exynos5800 Peach Pi Chromebook and an
> Exynos5422 Odroid XU4 board. Reboot and poweroff worked for both.
>
> But testing on Exynos3 and Exynos4 will be highly appreciated.
>
> Best regards,
> Javier
>
> arch/arm/boot/dts/exynos-syscon-restart.dtsi | 23 +++++++++++++++++++++++
> arch/arm/boot/dts/exynos3250.dtsi | 15 +--------------
> arch/arm/boot/dts/exynos4.dtsi | 15 +--------------
> arch/arm/boot/dts/exynos5.dtsi | 15 +--------------
> arch/arm/boot/dts/exynos5410.dtsi | 15 +--------------
> 5 files changed, 27 insertions(+), 56 deletions(-)
> create mode 100644 arch/arm/boot/dts/exynos-syscon-restart.dtsi
>
> diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
> new file mode 100644
> index 000000000000..2b8acf554881
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
> @@ -0,0 +1,23 @@
> +/*
> + * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/ {
> + poweroff: syscon-poweroff {
> + compatible = "syscon-poweroff";
> + regmap = <&pmu_system_controller>;
> + offset = <0x330C>; /* PS_HOLD_CONTROL */
> + mask = <0x5200>; /* reset value */
> + };
> +
> + reboot: syscon-reboot {
> + compatible = "syscon-reboot";
> + regmap = <&pmu_system_controller>;
> + offset = <0x0400>; /* SWRESET */
> + mask = <0x1>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
> index 18e3deffbf48..d9c221517935 100644
> --- a/arch/arm/boot/dts/exynos3250.dtsi
> +++ b/arch/arm/boot/dts/exynos3250.dtsi
> @@ -19,6 +19,7 @@
>
> #include "skeleton.dtsi"
> #include "exynos4-cpu-thermal.dtsi"
> +#include "exynos-syscon-restart.dtsi"
> #include <dt-bindings/clock/exynos3250.h>
>
> / {
> @@ -152,20 +153,6 @@
> interrupt-parent = <&gic>;
> };
>
> - poweroff: syscon-poweroff {
> - compatible = "syscon-poweroff";
> - regmap = <&pmu_system_controller>;
> - offset = <0x330C>; /* PS_HOLD_CONTROL */
> - mask = <0x5200>; /* Reset value */
> - };
> -
> - reboot: syscon-reboot {
> - compatible = "syscon-reboot";
> - regmap = <&pmu_system_controller>;
> - offset = <0x0400>; /* SWRESET */
> - mask = <0x1>;
> - };
> -
> mipi_phy: video-phy@10020710 {
> compatible = "samsung,s5pv210-mipi-video-phy";
> #phy-cells = <1>;
> diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
> index ca621a92319e..e6f6939ccdfa 100644
> --- a/arch/arm/boot/dts/exynos4.dtsi
> +++ b/arch/arm/boot/dts/exynos4.dtsi
> @@ -21,6 +21,7 @@
>
> #include <dt-bindings/clock/exynos4.h>
> #include <dt-bindings/clock/exynos-audss-clk.h>
> +#include "exynos-syscon-restart.dtsi"
> #include "skeleton.dtsi"
>
> / {
> @@ -163,20 +164,6 @@
> interrupt-parent = <&gic>;
> };
>
> - poweroff: syscon-poweroff {
> - compatible = "syscon-poweroff";
> - regmap = <&pmu_system_controller>;
> - offset = <0x330C>; /* PS_HOLD_CONTROL */
> - mask = <0x5200>; /* reset value */
> - };
> -
> - reboot: syscon-reboot {
> - compatible = "syscon-reboot";
> - regmap = <&pmu_system_controller>;
> - offset = <0x0400>; /* SWRESET */
> - mask = <0x1>;
> - };
> -
> dsi_0: dsi@11C80000 {
> compatible = "samsung,exynos4210-mipi-dsi";
> reg = <0x11C80000 0x10000>;
> diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
> index b61d1f637510..92313cac035e 100644
> --- a/arch/arm/boot/dts/exynos5.dtsi
> +++ b/arch/arm/boot/dts/exynos5.dtsi
> @@ -14,6 +14,7 @@
> */
>
> #include "skeleton.dtsi"
> +#include "exynos-syscon-restart.dtsi"
>
> / {
> interrupt-parent = <&gic>;
> @@ -93,20 +94,6 @@
> status = "disabled";
> };
>
> - poweroff: syscon-poweroff {
> - compatible = "syscon-poweroff";
> - regmap = <&pmu_system_controller>;
> - offset = <0x330C>; /* PS_HOLD_CONTROL */
> - mask = <0x5200>; /* reset value */
> - };
> -
> - reboot: syscon-reboot {
> - compatible = "syscon-reboot";
> - regmap = <&pmu_system_controller>;
> - offset = <0x0400>; /* SWRESET */
> - mask = <0x1>;
> - };
> -
> fimd: fimd@14400000 {
> compatible = "samsung,exynos5250-fimd";
> interrupt-parent = <&combiner>;
> diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
> index f3490f567344..fa558674ac76 100644
> --- a/arch/arm/boot/dts/exynos5410.dtsi
> +++ b/arch/arm/boot/dts/exynos5410.dtsi
> @@ -14,6 +14,7 @@
> */
>
> #include "skeleton.dtsi"
> +#include "exynos-syscon-restart.dtsi"
> #include <dt-bindings/clock/exynos5410.h>
>
> / {
> @@ -117,20 +118,6 @@
> reg = <0x10040000 0x5000>;
> };
>
> - poweroff: syscon-poweroff {
> - compatible = "syscon-poweroff";
> - regmap = <&pmu_system_controller>;
> - offset = <0x330C>; /* PS_HOLD_CONTROL */
> - mask = <0x5200>; /* reset value */
> - };
> -
> - reboot: syscon-reboot {
> - compatible = "syscon-reboot";
> - regmap = <&pmu_system_controller>;
> - offset = <0x0400>; /* SWRESET */
> - mask = <0x1>;
> - };
> -
> mct: mct@101C0000 {
> compatible = "samsung,exynos4210-mct";
> reg = <0x101C0000 0xB00>;
> --
> 2.5.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Regards,
Alim
[toc] | [prev] | [next] | [standalone]
| From | Krzysztof Kozlowski <k.kozlowski@samsung.com> |
|---|---|
| Date | 2016-02-14 07:50 +0100 |
| Subject | Re: [PATCH] ARM: dts: Move syscon reboot/poweroff to common dtsi for Exynos |
| Message-ID | <r1YFk-7yk-3@gated-at.bofh.it> |
| In reply to | #1330577 |
W dniu 10.02.2016 o 03:30, Javier Martinez Canillas pisze:
> All Exynos SoCs have the same syscon reboot and poweroff device nodes so
> there is no need to duplicate the same on each SoC dtsi and can be moved
> to a common dtsi that can be included by all the SoCs dtsi files.
>
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
>
> ---
> Hello,
>
> The patch was tested on an Exynos5800 Peach Pi Chromebook and an
> Exynos5422 Odroid XU4 board. Reboot and poweroff worked for both.
>
> But testing on Exynos3 and Exynos4 will be highly appreciated.
Would you be so kind and add my suggested-by (since it comes from
https://wiki.tizen.org/wiki/Exynos_Mainline_Kernel_TODO :) )
I'll test it on Exynos4 at work and then apply... but few comments below:
>
> Best regards,
> Javier
>
> arch/arm/boot/dts/exynos-syscon-restart.dtsi | 23 +++++++++++++++++++++++
> arch/arm/boot/dts/exynos3250.dtsi | 15 +--------------
> arch/arm/boot/dts/exynos4.dtsi | 15 +--------------
> arch/arm/boot/dts/exynos5.dtsi | 15 +--------------
> arch/arm/boot/dts/exynos5410.dtsi | 15 +--------------
> 5 files changed, 27 insertions(+), 56 deletions(-)
> create mode 100644 arch/arm/boot/dts/exynos-syscon-restart.dtsi
>
> diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
> new file mode 100644
> index 000000000000..2b8acf554881
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
> @@ -0,0 +1,23 @@
> +/*
> + * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/ {
In some of the DTSI this was under "soc" node, not at top-level.
Unfortunately we do not have consistency here - some DTSI have "soc",
some not. Anyway I think we should move to "soc" version.
> + poweroff: syscon-poweroff {
> + compatible = "syscon-poweroff";
> + regmap = <&pmu_system_controller>;
> + offset = <0x330C>; /* PS_HOLD_CONTROL */
> + mask = <0x5200>; /* reset value */
> + };
> +
> + reboot: syscon-reboot {
> + compatible = "syscon-reboot";
> + regmap = <&pmu_system_controller>;
> + offset = <0x0400>; /* SWRESET */
> + mask = <0x1>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
> index 18e3deffbf48..d9c221517935 100644
> --- a/arch/arm/boot/dts/exynos3250.dtsi
> +++ b/arch/arm/boot/dts/exynos3250.dtsi
> @@ -19,6 +19,7 @@
>
> #include "skeleton.dtsi"
> #include "exynos4-cpu-thermal.dtsi"
> +#include "exynos-syscon-restart.dtsi"
> #include <dt-bindings/clock/exynos3250.h>
>
> / {
> @@ -152,20 +153,6 @@
> interrupt-parent = <&gic>;
> };
>
> - poweroff: syscon-poweroff {
> - compatible = "syscon-poweroff";
> - regmap = <&pmu_system_controller>;
> - offset = <0x330C>; /* PS_HOLD_CONTROL */
> - mask = <0x5200>; /* Reset value */
> - };
> -
> - reboot: syscon-reboot {
> - compatible = "syscon-reboot";
> - regmap = <&pmu_system_controller>;
> - offset = <0x0400>; /* SWRESET */
> - mask = <0x1>;
> - };
> -
> mipi_phy: video-phy@10020710 {
> compatible = "samsung,s5pv210-mipi-video-phy";
> #phy-cells = <1>;
> diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
> index ca621a92319e..e6f6939ccdfa 100644
> --- a/arch/arm/boot/dts/exynos4.dtsi
> +++ b/arch/arm/boot/dts/exynos4.dtsi
> @@ -21,6 +21,7 @@
>
> #include <dt-bindings/clock/exynos4.h>
> #include <dt-bindings/clock/exynos-audss-clk.h>
> +#include "exynos-syscon-restart.dtsi"
Just to keep it consistent and logic - include after skeleton.
Best regards,
Krzysztof
[toc] | [prev] | [next] | [standalone]
| From | Javier Martinez Canillas <javier@osg.samsung.com> |
|---|---|
| Date | 2016-02-15 14:40 +0100 |
| Subject | Re: [PATCH] ARM: dts: Move syscon reboot/poweroff to common dtsi for Exynos |
| Message-ID | <r2rxD-1BY-1@gated-at.bofh.it> |
| In reply to | #1333437 |
Hello Krzysztof,
On 02/14/2016 03:44 AM, Krzysztof Kozlowski wrote:
> W dniu 10.02.2016 o 03:30, Javier Martinez Canillas pisze:
>> All Exynos SoCs have the same syscon reboot and poweroff device nodes so
>> there is no need to duplicate the same on each SoC dtsi and can be moved
>> to a common dtsi that can be included by all the SoCs dtsi files.
>>
>> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
>>
>> ---
>> Hello,
>>
>> The patch was tested on an Exynos5800 Peach Pi Chromebook and an
>> Exynos5422 Odroid XU4 board. Reboot and poweroff worked for both.
>>
>> But testing on Exynos3 and Exynos4 will be highly appreciated.
>
> Would you be so kind and add my suggested-by (since it comes from
> https://wiki.tizen.org/wiki/Exynos_Mainline_Kernel_TODO :) )
>
Right, sorry for missing that.
> I'll test it on Exynos4 at work and then apply... but few comments below:
>
>>
>> Best regards,
>> Javier
>>
>> arch/arm/boot/dts/exynos-syscon-restart.dtsi | 23 +++++++++++++++++++++++
>> arch/arm/boot/dts/exynos3250.dtsi | 15 +--------------
>> arch/arm/boot/dts/exynos4.dtsi | 15 +--------------
>> arch/arm/boot/dts/exynos5.dtsi | 15 +--------------
>> arch/arm/boot/dts/exynos5410.dtsi | 15 +--------------
>> 5 files changed, 27 insertions(+), 56 deletions(-)
>> create mode 100644 arch/arm/boot/dts/exynos-syscon-restart.dtsi
>>
>> diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
>> new file mode 100644
>> index 000000000000..2b8acf554881
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
>> @@ -0,0 +1,23 @@
>> +/*
>> + * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +/ {
>
> In some of the DTSI this was under "soc" node, not at top-level.
> Unfortunately we do not have consistency here - some DTSI have "soc",
Yes, I noticed this but as you said not all DTSI have a soc node
and that's why I made it top level in the DTSI.
> some not. Anyway I think we should move to "soc" version.
>
Not sure I'm following, did you mean to do it as a follow up or
to add a soc node for the missing DTSI as a part of this series?
>> + poweroff: syscon-poweroff {
>> + compatible = "syscon-poweroff";
>> + regmap = <&pmu_system_controller>;
>> + offset = <0x330C>; /* PS_HOLD_CONTROL */
>> + mask = <0x5200>; /* reset value */
>> + };
>> +
>> + reboot: syscon-reboot {
>> + compatible = "syscon-reboot";
>> + regmap = <&pmu_system_controller>;
>> + offset = <0x0400>; /* SWRESET */
>> + mask = <0x1>;
>> + };
>> +};
>> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
>> index 18e3deffbf48..d9c221517935 100644
>> --- a/arch/arm/boot/dts/exynos3250.dtsi
>> +++ b/arch/arm/boot/dts/exynos3250.dtsi
>> @@ -19,6 +19,7 @@
>>
>> #include "skeleton.dtsi"
>> #include "exynos4-cpu-thermal.dtsi"
>> +#include "exynos-syscon-restart.dtsi"
>> #include <dt-bindings/clock/exynos3250.h>
>>
>> / {
>> @@ -152,20 +153,6 @@
>> interrupt-parent = <&gic>;
>> };
>>
>> - poweroff: syscon-poweroff {
>> - compatible = "syscon-poweroff";
>> - regmap = <&pmu_system_controller>;
>> - offset = <0x330C>; /* PS_HOLD_CONTROL */
>> - mask = <0x5200>; /* Reset value */
>> - };
>> -
>> - reboot: syscon-reboot {
>> - compatible = "syscon-reboot";
>> - regmap = <&pmu_system_controller>;
>> - offset = <0x0400>; /* SWRESET */
>> - mask = <0x1>;
>> - };
>> -
>> mipi_phy: video-phy@10020710 {
>> compatible = "samsung,s5pv210-mipi-video-phy";
>> #phy-cells = <1>;
>> diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
>> index ca621a92319e..e6f6939ccdfa 100644
>> --- a/arch/arm/boot/dts/exynos4.dtsi
>> +++ b/arch/arm/boot/dts/exynos4.dtsi
>> @@ -21,6 +21,7 @@
>>
>> #include <dt-bindings/clock/exynos4.h>
>> #include <dt-bindings/clock/exynos-audss-clk.h>
>> +#include "exynos-syscon-restart.dtsi"
>
> Just to keep it consistent and logic - include after skeleton.
>
Ok, for include I usually try to keep alphabetically sorted but
I'll move it after skeleton if you prefer to keep it consistent.
> Best regards,
> Krzysztof
>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
[toc] | [prev] | [next] | [standalone]
| From | Krzysztof Kozlowski <k.kozlowski@samsung.com> |
|---|---|
| Date | 2016-02-16 00:10 +0100 |
| Subject | Re: [PATCH] ARM: dts: Move syscon reboot/poweroff to common dtsi for Exynos |
| Message-ID | <r2Arg-7MI-9@gated-at.bofh.it> |
| In reply to | #1334456 |
On 15.02.2016 22:38, Javier Martinez Canillas wrote: >> >> In some of the DTSI this was under "soc" node, not at top-level. >> Unfortunately we do not have consistency here - some DTSI have "soc", > > Yes, I noticed this but as you said not all DTSI have a soc node > and that's why I made it top level in the DTSI. > >> some not. Anyway I think we should move to "soc" version. >> > > Not sure I'm following, did you mean to do it as a follow up or > to add a soc node for the missing DTSI as a part of this series? I meant to send a v2 with this under "soc" node even though on some DTS we do not have the "soc". Optional follow up would be to make DTS consistent and move nodes under "soc"... but that would be also a lot of churn. Best regards, Krzysztof
[toc] | [prev] | [next] | [standalone]
| From | Javier Martinez Canillas <javier@osg.samsung.com> |
|---|---|
| Date | 2016-02-16 15:00 +0100 |
| Subject | Re: [PATCH] ARM: dts: Move syscon reboot/poweroff to common dtsi for Exynos |
| Message-ID | <r2Okz-8F-41@gated-at.bofh.it> |
| In reply to | #1334867 |
Hello Krzysztof, On 02/15/2016 08:04 PM, Krzysztof Kozlowski wrote: > On 15.02.2016 22:38, Javier Martinez Canillas wrote: >>> >>> In some of the DTSI this was under "soc" node, not at top-level. >>> Unfortunately we do not have consistency here - some DTSI have "soc", >> >> Yes, I noticed this but as you said not all DTSI have a soc node >> and that's why I made it top level in the DTSI. >> >>> some not. Anyway I think we should move to "soc" version. >>> >> >> Not sure I'm following, did you mean to do it as a follow up or >> to add a soc node for the missing DTSI as a part of this series? > > I meant to send a v2 with this under "soc" node even though on some DTS > we do not have the "soc". Optional follow up would be to make DTS > consistent and move nodes under "soc"... but that would be also a lot of > churn. > Thanks for the clarification. I'll post a v2 then moving under a soc node. > Best regards, > Krzysztof Best regards, -- Javier Martinez Canillas Open Source Group Samsung Research America
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web