Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1335233 > unrolled thread

[PATCH v3 04/10] serial: mps2-uart: add MPS2 UART driver

Started byVladimir Murzin <vladimir.murzin@arm.com>
First post2016-02-16 11:10 +0100
Last post2016-02-16 16:20 +0100
Articles 5 — 3 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v3 04/10] serial: mps2-uart: add MPS2 UART driver Vladimir Murzin <vladimir.murzin@arm.com> - 2016-02-16 11:10 +0100
    Re: [PATCH v3 04/10] serial: mps2-uart: add MPS2 UART driver Andy Shevchenko <andy.shevchenko@gmail.com> - 2016-02-16 11:50 +0100
      Re: [PATCH v3 04/10] serial: mps2-uart: add MPS2 UART driver Vladimir Murzin <vladimir.murzin@arm.com> - 2016-02-16 15:30 +0100
    Re: [PATCH v3 04/10] serial: mps2-uart: add MPS2 UART driver One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> - 2016-02-16 12:10 +0100
      Re: [PATCH v3 04/10] serial: mps2-uart: add MPS2 UART driver Vladimir Murzin <vladimir.murzin@arm.com> - 2016-02-16 16:20 +0100

#1335233 — [PATCH v3 04/10] serial: mps2-uart: add MPS2 UART driver

FromVladimir Murzin <vladimir.murzin@arm.com>
Date2016-02-16 11:10 +0100
Subject[PATCH v3 04/10] serial: mps2-uart: add MPS2 UART driver
Message-ID<r2KJY-6rY-23@gated-at.bofh.it>
This driver adds support to the UART controller found on ARM MPS2
platform.

Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
---
 drivers/tty/serial/Kconfig       |   12 +
 drivers/tty/serial/Makefile      |    1 +
 drivers/tty/serial/mps2-uart.c   |  584 ++++++++++++++++++++++++++++++++++++++
 include/uapi/linux/serial_core.h |    3 +
 4 files changed, 600 insertions(+)
 create mode 100644 drivers/tty/serial/mps2-uart.c

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 39721ec..3a248be 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1450,6 +1450,18 @@ config SERIAL_EFM32_UART
 	  This driver support the USART and UART ports on
 	  Energy Micro's efm32 SoCs.
 
+config SERIAL_MPS2_UART_CONSOLE
+	bool "MPS2 UART console support"
+	depends on SERIAL_MPS2_UART
+	select SERIAL_CORE_CONSOLE
+
+config SERIAL_MPS2_UART
+	bool "MPS2 UART port"
+	depends on ARM || COMPILE_TEST
+	select SERIAL_CORE
+	help
+	  This driver support the UART ports on ARM MPS2.
+
 config SERIAL_EFM32_UART_CONSOLE
 	bool "EFM32 UART/USART console support"
 	depends on SERIAL_EFM32_UART=y
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index b391c9b..1062503 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -91,6 +91,7 @@ obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR)	+= digicolor-usart.o
 obj-$(CONFIG_SERIAL_MEN_Z135)	+= men_z135_uart.o
 obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
 obj-$(CONFIG_SERIAL_STM32)	+= stm32-usart.o
+obj-$(CONFIG_SERIAL_MPS2_UART)	+= mps2-uart.o
 
 # GPIOLIB helpers for modem control lines
 obj-$(CONFIG_SERIAL_MCTRL_GPIO)	+= serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c
new file mode 100644
index 0000000..d97f3a9
--- /dev/null
+++ b/drivers/tty/serial/mps2-uart.c
@@ -0,0 +1,584 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * TODO: support for SysRq
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/tty_flip.h>
+#include <linux/types.h>
+
+#define SERIAL_NAME "ttyMPS"
+#define DRIVER_NAME "mps2-uart"
+#define MAKE_NAME(x) (DRIVER_NAME # x)
+
+#define UARTn_DATA				0x00
+
+#define UARTn_STATE				0x04
+#define UARTn_STATE_TX_FULL			BIT(0)
+#define UARTn_STATE_RX_FULL			BIT(1)
+#define UARTn_STATE_TX_OVERRUN			BIT(2)
+#define UARTn_STATE_RX_OVERRUN			BIT(3)
+
+#define UARTn_CTRL				0x08
+#define UARTn_CTRL_TX_ENABLE			BIT(0)
+#define UARTn_CTRL_RX_ENABLE			BIT(1)
+#define UARTn_CTRL_TX_INT_ENABLE		BIT(2)
+#define UARTn_CTRL_RX_INT_ENABLE		BIT(3)
+#define UARTn_CTRL_TX_OVERRUN_INT_ENABLE	BIT(4)
+#define UARTn_CTRL_RX_OVERRUN_INT_ENABLE	BIT(5)
+
+#define UARTn_INT				0x0c
+#define UARTn_INT_TX				BIT(0)
+#define UARTn_INT_RX				BIT(1)
+#define UARTn_INT_TX_OVERRUN			BIT(2)
+#define UARTn_INT_RX_OVERRUN			BIT(3)
+
+#define UARTn_BAUDDIV				0x10
+#define UARTn_BAUDDIV_MASK			GENMASK(20, 0)
+
+/*
+ * Helpers to make typical enable/disable operations more readable.
+ */
+#define UARTn_CTRL_TX_GRP 			(UARTn_CTRL_TX_ENABLE		 |\
+						 UARTn_CTRL_TX_INT_ENABLE	 |\
+						 UARTn_CTRL_TX_OVERRUN_INT_ENABLE)
+
+#define UARTn_CTRL_RX_GRP 			(UARTn_CTRL_RX_ENABLE		 |\
+						 UARTn_CTRL_RX_INT_ENABLE	 |\
+						 UARTn_CTRL_RX_OVERRUN_INT_ENABLE)
+
+#define MPS2_MAX_PORTS				3
+
+struct mps2_uart_port {
+	struct uart_port port;
+	struct clk *clk;
+	unsigned int tx_irq;
+	unsigned int rx_irq;
+};
+
+static inline struct mps2_uart_port *to_mps2_port(struct uart_port *port)
+{
+	return container_of(port, struct mps2_uart_port, port);
+}
+
+static void mps2_uart_write8(struct uart_port *port, u8 val, unsigned off)
+{
+	struct mps2_uart_port *mps_port = to_mps2_port(port);
+
+	writeb(val, mps_port->port.membase + off);
+}
+
+static u8 mps2_uart_read8(struct uart_port *port, unsigned off)
+{
+	struct mps2_uart_port *mps_port = to_mps2_port(port);
+
+	return readb(mps_port->port.membase + off);
+}
+
+static void mps2_uart_write32(struct uart_port *port, u32 val, unsigned off)
+{
+	struct mps2_uart_port *mps_port = to_mps2_port(port);
+
+	writel_relaxed(val, mps_port->port.membase + off);
+}
+
+static unsigned int mps2_uart_tx_empty(struct uart_port *port)
+{
+	u8 status = mps2_uart_read8(port, UARTn_STATE);
+
+	return (status & UARTn_STATE_TX_FULL) ? 0 : TIOCSER_TEMT;
+}
+
+static void mps2_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static unsigned int mps2_uart_get_mctrl(struct uart_port *port)
+{
+	return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR;
+}
+
+static void mps2_uart_stop_tx(struct uart_port *port)
+{
+	u8 control = mps2_uart_read8(port, UARTn_CTRL);
+
+	control &= ~UARTn_CTRL_TX_GRP;
+
+	mps2_uart_write8(port, control, UARTn_CTRL);
+}
+
+static void mps2_uart_tx_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+
+	while (!(mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_TX_FULL)) {
+		if (port->x_char) {
+			mps2_uart_write8(port, port->x_char, UARTn_DATA);
+			port->x_char = 0;
+			port->icount.tx++;
+			continue;
+		}
+
+		if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+			break;
+
+		mps2_uart_write8(port, xmit->buf[xmit->tail], UARTn_DATA);
+		xmit->tail = (xmit->tail + 1) % UART_XMIT_SIZE;
+		port->icount.tx++;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		mps2_uart_stop_tx(port);
+}
+
+static void mps2_uart_start_tx(struct uart_port *port)
+{
+	u8 control = mps2_uart_read8(port, UARTn_CTRL);
+
+	control |= UARTn_CTRL_TX_GRP;
+
+	mps2_uart_write8(port, control, UARTn_CTRL);
+	mps2_uart_tx_chars(port);
+}
+
+static void mps2_uart_stop_rx(struct uart_port *port)
+{
+	u8 control = mps2_uart_read8(port, UARTn_CTRL);
+
+	control &= ~UARTn_CTRL_RX_GRP;
+
+	mps2_uart_write8(port, control, UARTn_CTRL);
+}
+
+static void mps2_uart_break_ctl(struct uart_port *port, int ctl)
+{
+}
+
+static void mps2_uart_rx_chars(struct uart_port *port)
+{
+	struct tty_port *tport = &port->state->port;
+
+	while (mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_RX_FULL) {
+		u8 rxdata = mps2_uart_read8(port, UARTn_DATA);
+
+		port->icount.rx++;
+		tty_insert_flip_char(&port->state->port, rxdata, TTY_NORMAL);
+	}
+
+	spin_unlock(&port->lock);
+	tty_flip_buffer_push(tport);
+	spin_lock(&port->lock);
+}
+
+static irqreturn_t mps2_uart_rxirq(int irq, void *data)
+{
+
+	struct uart_port *port = data;
+	u8 irqflag = mps2_uart_read8(port, UARTn_INT);
+
+	if (unlikely(!(irqflag & UARTn_INT_RX)))
+		return IRQ_NONE;
+
+	spin_lock(&port->lock);
+
+	mps2_uart_write8(port, UARTn_INT_RX, UARTn_INT);
+	mps2_uart_rx_chars(port);
+
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mps2_uart_txirq(int irq, void *data)
+{
+	struct uart_port *port = data;
+	u8 irqflag = mps2_uart_read8(port, UARTn_INT);
+
+	if (unlikely(!(irqflag & UARTn_INT_TX)))
+		return IRQ_NONE;
+
+	mps2_uart_write8(port, UARTn_INT_TX, UARTn_INT);
+	mps2_uart_tx_chars(port);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mps2_uart_oerrirq(int irq, void *data)
+{
+	irqreturn_t handled = IRQ_NONE;
+	struct uart_port *port = data;
+	u8 irqflag = mps2_uart_read8(port, UARTn_INT);
+
+	spin_lock(&port->lock);
+
+	if (irqflag & UARTn_INT_RX_OVERRUN) {
+		struct tty_port *tport = &port->state->port;
+
+		mps2_uart_write8(port, UARTn_INT_RX_OVERRUN, UARTn_INT);
+		tty_insert_flip_char(tport, 0, TTY_OVERRUN);
+		port->icount.overrun++;
+		handled = IRQ_HANDLED;
+	}
+
+	/*
+	 * It's never been seen in practice and it never *should* happen since
+	 * we check if there is enough room in TX buffer before sending data.
+	 * So we keep this check in case something suspicious has happened.
+	 */
+	if (irqflag & UARTn_INT_TX_OVERRUN) {
+		mps2_uart_write8(port, UARTn_INT_TX_OVERRUN, UARTn_INT);
+		dev_warn(port->dev, "unexpected overrun interrupt\n");
+		handled = IRQ_HANDLED;
+	}
+
+	spin_unlock(&port->lock);
+
+	return handled;
+}
+
+static int mps2_uart_startup(struct uart_port *port)
+{
+	struct mps2_uart_port *mps_port = to_mps2_port(port);
+	u8 control = mps2_uart_read8(port, UARTn_CTRL);
+	int ret;
+
+	control &= ~(UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP);
+
+	mps2_uart_write8(port, control, UARTn_CTRL);
+
+	ret = request_irq(mps_port->rx_irq, mps2_uart_rxirq, 0,
+			  MAKE_NAME(-rx), mps_port);
+	if (ret) {
+		dev_err(port->dev, "failed to register rxirq (%d)\n", ret);
+		goto err_no_rxirq;
+	}
+
+	ret = request_irq(mps_port->tx_irq, mps2_uart_txirq, 0,
+			  MAKE_NAME(-tx), mps_port);
+	if (ret) {
+		dev_err(port->dev, "failed to register txirq (%d)\n", ret);
+		goto err_no_txirq;
+	}
+
+	ret = request_irq(port->irq, mps2_uart_oerrirq, IRQF_SHARED,
+			  MAKE_NAME(-overrun), mps_port);
+
+	if (ret) {
+		dev_err(port->dev, "failed to register oerrirq (%d)\n", ret);
+	} else {
+		control |= UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP;
+
+		mps2_uart_write8(port, control, UARTn_CTRL);
+
+		return 0;
+	}
+
+	free_irq(mps_port->tx_irq, mps_port);
+err_no_txirq:
+	free_irq(mps_port->rx_irq, mps_port);
+err_no_rxirq:
+	return ret;
+}
+
+static void mps2_uart_shutdown(struct uart_port *port)
+{
+	struct mps2_uart_port *mps_port = to_mps2_port(port);
+	u8 control = mps2_uart_read8(port, UARTn_CTRL);
+
+	control &= ~(UARTn_CTRL_RX_GRP| UARTn_CTRL_TX_GRP);
+
+	mps2_uart_write8(port, control, UARTn_CTRL);
+
+	free_irq(mps_port->rx_irq, mps_port);
+	free_irq(mps_port->tx_irq, mps_port);
+	free_irq(port->irq, mps_port);
+}
+
+static void mps2_uart_set_termios(struct uart_port *port,
+	struct ktermios *new, struct ktermios *old)
+{
+	unsigned long flags;
+	unsigned int baud, bauddiv;
+
+	new->c_cflag &= ~(CRTSCTS | CMSPAR);
+	new->c_cflag &= ~CSIZE;
+	new->c_cflag |= CS8;
+	new->c_cflag &= ~PARENB;
+	new->c_cflag &= ~CSTOPB;
+
+	baud = uart_get_baud_rate(port, new, old,
+			DIV_ROUND_CLOSEST(port->uartclk, UARTn_BAUDDIV_MASK),
+			DIV_ROUND_CLOSEST(port->uartclk, 16));
+
+	bauddiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	uart_update_timeout(port, new->c_cflag, baud);
+	mps2_uart_write32(port, bauddiv, UARTn_BAUDDIV);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *mps2_uart_type(struct uart_port *port)
+{
+	return (port->type == PORT_MPS2UART) ? DRIVER_NAME : NULL;
+}
+
+static void mps2_uart_release_port(struct uart_port *port)
+{
+}
+
+static int mps2_uart_request_port(struct uart_port *port)
+{
+	return 0;
+}
+
+static void mps2_uart_config_port(struct uart_port *port, int type)
+{
+	if (type & UART_CONFIG_TYPE && !mps2_uart_request_port(port))
+		port->type = PORT_MPS2UART;
+}
+
+static int mps2_uart_verify_port(struct uart_port *port, struct serial_struct *serinfo)
+{
+	return -EINVAL;
+}
+
+static const struct uart_ops mps2_uart_pops = {
+	.tx_empty = mps2_uart_tx_empty,
+	.set_mctrl = mps2_uart_set_mctrl,
+	.get_mctrl = mps2_uart_get_mctrl,
+	.stop_tx = mps2_uart_stop_tx,
+	.start_tx = mps2_uart_start_tx,
+	.stop_rx = mps2_uart_stop_rx,
+	.break_ctl = mps2_uart_break_ctl,
+	.startup = mps2_uart_startup,
+	.shutdown = mps2_uart_shutdown,
+	.set_termios = mps2_uart_set_termios,
+	.type = mps2_uart_type,
+	.release_port = mps2_uart_release_port,
+	.request_port = mps2_uart_request_port,
+	.config_port = mps2_uart_config_port,
+	.verify_port = mps2_uart_verify_port,
+};
+
+static struct mps2_uart_port mps2_uart_ports[MPS2_MAX_PORTS];
+
+#ifdef CONFIG_SERIAL_MPS2_UART_CONSOLE
+static void mps2_uart_console_putchar(struct uart_port *port, int ch)
+{
+	while (mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_TX_FULL)
+		cpu_relax();
+
+	mps2_uart_write8(port, ch, UARTn_DATA);
+}
+
+static void mps2_uart_console_write(struct console *co, const char *s, unsigned int cnt)
+{
+	struct uart_port *port = &mps2_uart_ports[co->index].port;
+
+	uart_console_write(port, s, cnt, mps2_uart_console_putchar);
+}
+
+static int mps2_uart_console_setup(struct console *co, char *options)
+{
+	struct mps2_uart_port *mps_port;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index < 0 || co->index >= MPS2_MAX_PORTS)
+		return -ENODEV;
+
+	mps_port = &mps2_uart_ports[co->index];
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(&mps_port->port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver mps2_uart_driver;
+
+static struct console mps2_uart_console = {
+	.name = SERIAL_NAME,
+	.device = uart_console_device,
+	.write = mps2_uart_console_write,
+	.setup = mps2_uart_console_setup,
+	.flags = CON_PRINTBUFFER,
+	.index = -1,
+	.data = &mps2_uart_driver,
+};
+
+#define MPS2_SERIAL_CONSOLE (&mps2_uart_console)
+
+#else
+#define MPS2_SERIAL_CONSOLE NULL
+#endif
+
+static struct uart_driver mps2_uart_driver = {
+	.driver_name = DRIVER_NAME,
+	.dev_name = SERIAL_NAME,
+	.nr = MPS2_MAX_PORTS,
+	.cons = MPS2_SERIAL_CONSOLE,
+};
+
+static struct mps2_uart_port *mps2_of_get_port(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int id;
+
+	if (!np)
+		return NULL;
+
+	id = of_alias_get_id(np, "serial");
+	if (id < 0)
+		id = 0;
+
+	if (WARN_ON(id >= MPS2_MAX_PORTS))
+		return NULL;
+
+	mps2_uart_ports[id].port.line = id;
+	return &mps2_uart_ports[id];
+}
+
+static int mps2_init_port(struct mps2_uart_port *mps_port,
+			struct platform_device *pdev)
+{
+	int ret;
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mps_port->port.membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mps_port->port.membase))
+		return PTR_ERR(mps_port->port.membase);
+
+	mps_port->port.mapbase = res->start;
+	mps_port->port.mapsize = resource_size(res);
+
+	mps_port->rx_irq = platform_get_irq(pdev, 0);
+	mps_port->tx_irq = platform_get_irq(pdev, 1);
+	mps_port->port.irq = platform_get_irq(pdev, 2);
+
+	mps_port->port.iotype = UPIO_MEM;
+	mps_port->port.flags = UPF_BOOT_AUTOCONF;
+	mps_port->port.fifosize = 1;
+	mps_port->port.ops = &mps2_uart_pops;
+	mps_port->port.dev = &pdev->dev;
+
+	mps_port->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(mps_port->clk))
+		return PTR_ERR(mps_port->clk);
+
+	ret = clk_prepare_enable(mps_port->clk);
+	if (ret)
+		return ret;
+
+	mps_port->port.uartclk = clk_get_rate(mps_port->clk);
+
+	clk_disable_unprepare(mps_port->clk);
+
+	return ret;
+}
+
+static int mps2_serial_probe(struct platform_device *pdev)
+{
+	struct mps2_uart_port *mps_port;
+	int ret;
+
+	mps_port = mps2_of_get_port(pdev);
+	if (!mps_port)
+		return -ENODEV;
+
+	ret = mps2_init_port(mps_port, pdev);
+	if (ret)
+		return ret;
+
+	ret = uart_add_one_port(&mps2_uart_driver, &mps_port->port);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, mps_port);
+
+	return 0;
+}
+
+static int mps2_serial_remove(struct platform_device *pdev)
+{
+	struct mps2_uart_port *mps_port = platform_get_drvdata(pdev);
+
+	uart_remove_one_port(&mps2_uart_driver, &mps_port->port);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id mps2_match[] = {
+	{ .compatible = "arm,mps2-uart", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mps2_match);
+#endif
+
+static struct platform_driver mps2_serial_driver = {
+	.probe = mps2_serial_probe,
+	.remove = mps2_serial_remove,
+
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = of_match_ptr(mps2_match),
+	},
+};
+
+static int __init mps2_uart_init(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&mps2_uart_driver);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&mps2_serial_driver);
+	if (ret)
+		uart_unregister_driver(&mps2_uart_driver);
+
+	pr_info("MPS2 UART driver initialized\n");
+
+	return ret;
+}
+module_init(mps2_uart_init);
+
+static void __exit mps2_uart_exit(void)
+{
+	platform_driver_unregister(&mps2_serial_driver);
+	uart_unregister_driver(&mps2_uart_driver);
+}
+module_exit(mps2_uart_exit);
+
+MODULE_AUTHOR("Vladimir Murzin <vladimir.murzin@arm.com>");
+MODULE_DESCRIPTION("MPS2 UART driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 3e5d757..1fa57bb 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -261,4 +261,7 @@
 /* STM32 USART */
 #define PORT_STM32	113
 
+/* MPS2 UART */
+#define PORT_MPS2UART	114
+
 #endif /* _UAPILINUX_SERIAL_CORE_H */
-- 
1.7.9.5

[toc] | [next] | [standalone]

#1335267

FromAndy Shevchenko <andy.shevchenko@gmail.com>
Date2016-02-16 11:50 +0100
Message-ID<r2LmF-6HF-15@gated-at.bofh.it>
In reply to#1335233
On Tue, Feb 16, 2016 at 12:08 PM, Vladimir Murzin
<vladimir.murzin@arm.com> wrote:
> This driver adds support to the UART controller found on ARM MPS2
> platform.


> +static irqreturn_t mps2_uart_oerrirq(int irq, void *data)
> +{
> +       irqreturn_t handled = IRQ_NONE;
> +       struct uart_port *port = data;
> +       u8 irqflag = mps2_uart_read8(port, UARTn_INT);
> +
> +       spin_lock(&port->lock);
> +
> +       if (irqflag & UARTn_INT_RX_OVERRUN) {
> +               struct tty_port *tport = &port->state->port;
> +
> +               mps2_uart_write8(port, UARTn_INT_RX_OVERRUN, UARTn_INT);
> +               tty_insert_flip_char(tport, 0, TTY_OVERRUN);
> +               port->icount.overrun++;
> +               handled = IRQ_HANDLED;
> +       }
> +
> +       /*
> +        * It's never been seen in practice and it never *should* happen since
> +        * we check if there is enough room in TX buffer before sending data.
> +        * So we keep this check in case something suspicious has happened.
> +        */
> +       if (irqflag & UARTn_INT_TX_OVERRUN) {
> +               mps2_uart_write8(port, UARTn_INT_TX_OVERRUN, UARTn_INT);

> +               dev_warn(port->dev, "unexpected overrun interrupt\n");

I'm not sure there is no dead lock if this happens on the same port
which is used as console.

> +               handled = IRQ_HANDLED;
> +       }
> +
> +       spin_unlock(&port->lock);
> +
> +       return handled;
> +}
> +
> +static int mps2_uart_startup(struct uart_port *port)
> +{
> +       struct mps2_uart_port *mps_port = to_mps2_port(port);
> +       u8 control = mps2_uart_read8(port, UARTn_CTRL);
> +       int ret;
> +
> +       control &= ~(UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP);
> +
> +       mps2_uart_write8(port, control, UARTn_CTRL);
> +
> +       ret = request_irq(mps_port->rx_irq, mps2_uart_rxirq, 0,
> +                         MAKE_NAME(-rx), mps_port);
> +       if (ret) {
> +               dev_err(port->dev, "failed to register rxirq (%d)\n", ret);
> +               goto err_no_rxirq;

It should be below, here just a plain return.

> +       }
> +
> +       ret = request_irq(mps_port->tx_irq, mps2_uart_txirq, 0,
> +                         MAKE_NAME(-tx), mps_port);
> +       if (ret) {
> +               dev_err(port->dev, "failed to register txirq (%d)\n", ret);
> +               goto err_no_txirq;

goto err_free_rxirq;

> +       }
> +
> +       ret = request_irq(port->irq, mps2_uart_oerrirq, IRQF_SHARED,
> +                         MAKE_NAME(-overrun), mps_port);
> +
> +       if (ret) {
> +               dev_err(port->dev, "failed to register oerrirq (%d)\n", ret);

Why not goto pattern here as well?

goto err_free_txirq;

> +       } else {

…and remove this else.

> +               control |= UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP;
> +
> +               mps2_uart_write8(port, control, UARTn_CTRL);
> +
> +               return 0;
> +       }
> +
> +       free_irq(mps_port->tx_irq, mps_port);
> +err_no_txirq:
> +       free_irq(mps_port->rx_irq, mps_port);
> +err_no_rxirq:
> +       return ret;
> +}


> +static struct mps2_uart_port mps2_uart_ports[MPS2_MAX_PORTS];
> +
> +#ifdef CONFIG_SERIAL_MPS2_UART_CONSOLE
> +static void mps2_uart_console_putchar(struct uart_port *port, int ch)
> +{
> +       while (mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_TX_FULL)
> +               cpu_relax();

Infinite?

> +
> +       mps2_uart_write8(port, ch, UARTn_DATA);
> +}

> +static int mps2_init_port(struct mps2_uart_port *mps_port,
> +                       struct platform_device *pdev)
> +{
> +       int ret;
> +       struct resource *res;

Maybe:
       struct resource *res;
       int ret;
?

-- 
With Best Regards,
Andy Shevchenko

[toc] | [prev] | [next] | [standalone]

#1335459

FromVladimir Murzin <vladimir.murzin@arm.com>
Date2016-02-16 15:30 +0100
Message-ID<r2ONA-yV-21@gated-at.bofh.it>
In reply to#1335267
On 16/02/16 10:48, Andy Shevchenko wrote:
> On Tue, Feb 16, 2016 at 12:08 PM, Vladimir Murzin
> <vladimir.murzin@arm.com> wrote:
>> This driver adds support to the UART controller found on ARM MPS2
>> platform.
> 
> 
>> +static irqreturn_t mps2_uart_oerrirq(int irq, void *data)
>> +{
>> +       irqreturn_t handled = IRQ_NONE;
>> +       struct uart_port *port = data;
>> +       u8 irqflag = mps2_uart_read8(port, UARTn_INT);
>> +
>> +       spin_lock(&port->lock);
>> +
>> +       if (irqflag & UARTn_INT_RX_OVERRUN) {
>> +               struct tty_port *tport = &port->state->port;
>> +
>> +               mps2_uart_write8(port, UARTn_INT_RX_OVERRUN, UARTn_INT);
>> +               tty_insert_flip_char(tport, 0, TTY_OVERRUN);
>> +               port->icount.overrun++;
>> +               handled = IRQ_HANDLED;
>> +       }
>> +
>> +       /*
>> +        * It's never been seen in practice and it never *should* happen since
>> +        * we check if there is enough room in TX buffer before sending data.
>> +        * So we keep this check in case something suspicious has happened.
>> +        */
>> +       if (irqflag & UARTn_INT_TX_OVERRUN) {
>> +               mps2_uart_write8(port, UARTn_INT_TX_OVERRUN, UARTn_INT);
> 
>> +               dev_warn(port->dev, "unexpected overrun interrupt\n");
> 
> I'm not sure there is no dead lock if this happens on the same port
> which is used as console.

Right, doesn't look like a good idea...

> 
>> +               handled = IRQ_HANDLED;
>> +       }
>> +
>> +       spin_unlock(&port->lock);
>> +
>> +       return handled;
>> +}
>> +
>> +static int mps2_uart_startup(struct uart_port *port)
>> +{
>> +       struct mps2_uart_port *mps_port = to_mps2_port(port);
>> +       u8 control = mps2_uart_read8(port, UARTn_CTRL);
>> +       int ret;
>> +
>> +       control &= ~(UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP);
>> +
>> +       mps2_uart_write8(port, control, UARTn_CTRL);
>> +
>> +       ret = request_irq(mps_port->rx_irq, mps2_uart_rxirq, 0,
>> +                         MAKE_NAME(-rx), mps_port);
>> +       if (ret) {
>> +               dev_err(port->dev, "failed to register rxirq (%d)\n", ret);
>> +               goto err_no_rxirq;
> 
> It should be below, here just a plain return.
> 
>> +       }
>> +
>> +       ret = request_irq(mps_port->tx_irq, mps2_uart_txirq, 0,
>> +                         MAKE_NAME(-tx), mps_port);
>> +       if (ret) {
>> +               dev_err(port->dev, "failed to register txirq (%d)\n", ret);
>> +               goto err_no_txirq;
> 
> goto err_free_rxirq;
> 
>> +       }
>> +
>> +       ret = request_irq(port->irq, mps2_uart_oerrirq, IRQF_SHARED,
>> +                         MAKE_NAME(-overrun), mps_port);
>> +
>> +       if (ret) {
>> +               dev_err(port->dev, "failed to register oerrirq (%d)\n", ret);
> 
> Why not goto pattern here as well?
> 
> goto err_free_txirq;
> 
>> +       } else {
> 
> …and remove this else.
> 
>> +               control |= UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP;
>> +
>> +               mps2_uart_write8(port, control, UARTn_CTRL);
>> +
>> +               return 0;
>> +       }
>> +
>> +       free_irq(mps_port->tx_irq, mps_port);
>> +err_no_txirq:
>> +       free_irq(mps_port->rx_irq, mps_port);
>> +err_no_rxirq:
>> +       return ret;
>> +}
> 

Ok. Will rework that.

> 
>> +static struct mps2_uart_port mps2_uart_ports[MPS2_MAX_PORTS];
>> +
>> +#ifdef CONFIG_SERIAL_MPS2_UART_CONSOLE
>> +static void mps2_uart_console_putchar(struct uart_port *port, int ch)
>> +{
>> +       while (mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_TX_FULL)
>> +               cpu_relax();
> 
> Infinite?
> 

The same as for [5/10].

>> +
>> +       mps2_uart_write8(port, ch, UARTn_DATA);
>> +}
> 
>> +static int mps2_init_port(struct mps2_uart_port *mps_port,
>> +                       struct platform_device *pdev)
>> +{
>> +       int ret;
>> +       struct resource *res;
> 
> Maybe:
>        struct resource *res;
>        int ret;
> ?
> 

Matter of taste :) Will change it since I need to update the patch anyway.

Thanks
Vladimir

[toc] | [prev] | [next] | [standalone]

#1335285

FromOne Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Date2016-02-16 12:10 +0100
Message-ID<r2LG3-751-53@gated-at.bofh.it>
In reply to#1335233
> +static void mps2_uart_set_termios(struct uart_port *port,
> +	struct ktermios *new, struct ktermios *old)

Not that I care much but you might not want to call it "new". People get
upset when their syntax aware editors get confused by C++ keywords 8)

> +{
> +	unsigned long flags;
> +	unsigned int baud, bauddiv;
> +
> +	new->c_cflag &= ~(CRTSCTS | CMSPAR);
> +	new->c_cflag &= ~CSIZE;
> +	new->c_cflag |= CS8;
> +	new->c_cflag &= ~PARENB;
> +	new->c_cflag &= ~CSTOPB;
> +
> +	baud = uart_get_baud_rate(port, new, old,
> +			DIV_ROUND_CLOSEST(port->uartclk, UARTn_BAUDDIV_MASK),
> +			DIV_ROUND_CLOSEST(port->uartclk, 16));
> +
> +	bauddiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
> +
> +	spin_lock_irqsave(&port->lock, flags);
> +
> +	uart_update_timeout(port, new->c_cflag, baud);
> +	mps2_uart_write32(port, bauddiv, UARTn_BAUDDIV);

This should also set the baud bits back in the termios struct
accordingly. 

	if (tty_termios_baud_rate(new))
		tty_termios_encode_baud_rate(new, baud, baud);


Not a big deal and could certainly be a follow up patch after it's merged.

Alan

[toc] | [prev] | [next] | [standalone]

#1335505

FromVladimir Murzin <vladimir.murzin@arm.com>
Date2016-02-16 16:20 +0100
Message-ID<r2PzY-18K-5@gated-at.bofh.it>
In reply to#1335285
On 16/02/16 11:02, One Thousand Gnomes wrote:
> 
>> +static void mps2_uart_set_termios(struct uart_port *port,
>> +	struct ktermios *new, struct ktermios *old)
> 
> Not that I care much but you might not want to call it "new". People get
> upset when their syntax aware editors get confused by C++ keywords 8)

Just renamed it to have cpp suffix and looks like my editor falls under
that category :)

> 
>> +{
>> +	unsigned long flags;
>> +	unsigned int baud, bauddiv;
>> +
>> +	new->c_cflag &= ~(CRTSCTS | CMSPAR);
>> +	new->c_cflag &= ~CSIZE;
>> +	new->c_cflag |= CS8;
>> +	new->c_cflag &= ~PARENB;
>> +	new->c_cflag &= ~CSTOPB;
>> +
>> +	baud = uart_get_baud_rate(port, new, old,
>> +			DIV_ROUND_CLOSEST(port->uartclk, UARTn_BAUDDIV_MASK),
>> +			DIV_ROUND_CLOSEST(port->uartclk, 16));
>> +
>> +	bauddiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
>> +
>> +	spin_lock_irqsave(&port->lock, flags);
>> +
>> +	uart_update_timeout(port, new->c_cflag, baud);
>> +	mps2_uart_write32(port, bauddiv, UARTn_BAUDDIV);
> 
> This should also set the baud bits back in the termios struct
> accordingly. 
> 
> 	if (tty_termios_baud_rate(new))
> 		tty_termios_encode_baud_rate(new, baud, baud);
> 
> 
> Not a big deal and could certainly be a follow up patch after it's merged.

I'll fold it in the next version.

Thanks
Vladimir

> 
> Alan
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 
> 
>

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web