Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1330618 > unrolled thread

[PATCH v2] net: fec: Add "phy-reset-active-low" property to DT

Started byBernhard Walle <bernhard@bwalle.de>
First post2016-02-09 21:10 +0100
Last post2016-02-21 20:40 +0100
Articles 7 — 5 participants

Back to article view | Back to linux.kernel

Contents

  [PATCH v2] net: fec: Add "phy-reset-active-low" property to DT Bernhard Walle <bernhard@bwalle.de> - 2016-02-09 21:10 +0100
    Re: [PATCH v2] net: fec: Add "phy-reset-active-low" property to DT Fabio Estevam <festevam@gmail.com> - 2016-02-09 23:20 +0100
    Re: [PATCH v2] net: fec: Add "phy-reset-active-low" property to DT Andrew Lunn <andrew@lunn.ch> - 2016-02-10 19:10 +0100
    Re: [PATCH v2] net: fec: Add "phy-reset-active-low" property to DT Fabio Estevam <festevam@gmail.com> - 2016-02-12 16:30 +0100
      Re: [PATCH v2] net: fec: Add "phy-reset-active-low" property to DT Rob Herring <robh@kernel.org> - 2016-02-12 20:50 +0100
    Re: [PATCH v2] net: fec: Add "phy-reset-active-low" property to DT Rob Herring <robh@kernel.org> - 2016-02-12 16:30 +0100
    Re: [PATCH v2] net: fec: Add "phy-reset-active-low" property to DT Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - 2016-02-21 20:40 +0100

#1330618 — [PATCH v2] net: fec: Add "phy-reset-active-low" property to DT

FromBernhard Walle <bernhard@bwalle.de>
Date2016-02-09 21:10 +0100
Subject[PATCH v2] net: fec: Add "phy-reset-active-low" property to DT
Message-ID<r0mLN-tr-9@gated-at.bofh.it>
We need that for a custom hardware that needs the reverse reset
sequence.

Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
---
Changes compared to v1:
 - Add documentation to 'phy-reset-gpios' that flags are ignored
   as suggested by Andrew Lunn.

 Documentation/devicetree/bindings/net/fsl-fec.txt | 7 ++++++-
 drivers/net/ethernet/freescale/fec_main.c         | 8 ++++++--
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index a9eb611..0caa429 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -7,11 +7,16 @@ Required properties:
 - phy-mode : See ethernet.txt file in the same directory
 
 Optional properties:
-- phy-reset-gpios : Should specify the gpio for phy reset
+- phy-reset-gpios : Should specify the gpio for phy reset. Additional
+  flags are ignored, see the non-standard 'phy-reset-active-low' property
+  instead.
 - phy-reset-duration : Reset duration in milliseconds.  Should present
   only if property "phy-reset-gpios" is available.  Missing the property
   will have the duration be 1 millisecond.  Numbers greater than 1000 are
   invalid and 1 millisecond will be used instead.
+- phy-reset-active-low : If present then the reset sequence using the GPIO
+  specified in the "phy-reset-gpios" property is reversed (H=reset state,
+  L=operation state).
 - phy-supply : regulator that powers the Ethernet PHY.
 - phy-handle : phandle to the PHY device connected to this device.
 - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 41c81f6..98caf87 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3229,6 +3229,7 @@ static int fec_enet_init(struct net_device *ndev)
 static void fec_reset_phy(struct platform_device *pdev)
 {
 	int err, phy_reset;
+	bool active_low = false;
 	int msec = 1;
 	struct device_node *np = pdev->dev.of_node;
 
@@ -3244,14 +3245,17 @@ static void fec_reset_phy(struct platform_device *pdev)
 	if (!gpio_is_valid(phy_reset))
 		return;
 
+	active_low = of_property_read_bool(np, "phy-reset-active-low");
+
 	err = devm_gpio_request_one(&pdev->dev, phy_reset,
-				    GPIOF_OUT_INIT_LOW, "phy-reset");
+			active_low ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
+			"phy-reset");
 	if (err) {
 		dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
 		return;
 	}
 	msleep(msec);
-	gpio_set_value_cansleep(phy_reset, 1);
+	gpio_set_value_cansleep(phy_reset, !active_low);
 }
 #else /* CONFIG_OF */
 static void fec_reset_phy(struct platform_device *pdev)
-- 
2.7.1

[toc] | [next] | [standalone]

#1330688

FromFabio Estevam <festevam@gmail.com>
Date2016-02-09 23:20 +0100
Message-ID<r0oNA-1Pq-15@gated-at.bofh.it>
In reply to#1330618
Hi Bernhard,

On Tue, Feb 9, 2016 at 6:01 PM, Bernhard Walle <bernhard@bwalle.de> wrote:
> We need that for a custom hardware that needs the reverse reset
> sequence.
>
> Signed-off-by: Bernhard Walle <bernhard@bwalle.de>

Looks good:

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

[toc] | [prev] | [next] | [standalone]

#1331400

FromAndrew Lunn <andrew@lunn.ch>
Date2016-02-10 19:10 +0100
Message-ID<r0Hnc-5O7-11@gated-at.bofh.it>
In reply to#1330618
On Tue, Feb 09, 2016 at 09:01:12PM +0100, Bernhard Walle wrote:
> We need that for a custom hardware that needs the reverse reset
> sequence.
> 
> Signed-off-by: Bernhard Walle <bernhard@bwalle.de>

Thanks for updating the Documentation.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

     Andrew

> ---
> Changes compared to v1:
>  - Add documentation to 'phy-reset-gpios' that flags are ignored
>    as suggested by Andrew Lunn.
> 
>  Documentation/devicetree/bindings/net/fsl-fec.txt | 7 ++++++-
>  drivers/net/ethernet/freescale/fec_main.c         | 8 ++++++--
>  2 files changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
> index a9eb611..0caa429 100644
> --- a/Documentation/devicetree/bindings/net/fsl-fec.txt
> +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
> @@ -7,11 +7,16 @@ Required properties:
>  - phy-mode : See ethernet.txt file in the same directory
>  
>  Optional properties:
> -- phy-reset-gpios : Should specify the gpio for phy reset
> +- phy-reset-gpios : Should specify the gpio for phy reset. Additional
> +  flags are ignored, see the non-standard 'phy-reset-active-low' property
> +  instead.
>  - phy-reset-duration : Reset duration in milliseconds.  Should present
>    only if property "phy-reset-gpios" is available.  Missing the property
>    will have the duration be 1 millisecond.  Numbers greater than 1000 are
>    invalid and 1 millisecond will be used instead.
> +- phy-reset-active-low : If present then the reset sequence using the GPIO
> +  specified in the "phy-reset-gpios" property is reversed (H=reset state,
> +  L=operation state).
>  - phy-supply : regulator that powers the Ethernet PHY.
>  - phy-handle : phandle to the PHY device connected to this device.
>  - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
> diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
> index 41c81f6..98caf87 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -3229,6 +3229,7 @@ static int fec_enet_init(struct net_device *ndev)
>  static void fec_reset_phy(struct platform_device *pdev)
>  {
>  	int err, phy_reset;
> +	bool active_low = false;
>  	int msec = 1;
>  	struct device_node *np = pdev->dev.of_node;
>  
> @@ -3244,14 +3245,17 @@ static void fec_reset_phy(struct platform_device *pdev)
>  	if (!gpio_is_valid(phy_reset))
>  		return;
>  
> +	active_low = of_property_read_bool(np, "phy-reset-active-low");
> +
>  	err = devm_gpio_request_one(&pdev->dev, phy_reset,
> -				    GPIOF_OUT_INIT_LOW, "phy-reset");
> +			active_low ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
> +			"phy-reset");
>  	if (err) {
>  		dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
>  		return;
>  	}
>  	msleep(msec);
> -	gpio_set_value_cansleep(phy_reset, 1);
> +	gpio_set_value_cansleep(phy_reset, !active_low);
>  }
>  #else /* CONFIG_OF */
>  static void fec_reset_phy(struct platform_device *pdev)
> -- 
> 2.7.1
>

[toc] | [prev] | [next] | [standalone]

#1332807

FromFabio Estevam <festevam@gmail.com>
Date2016-02-12 16:30 +0100
Message-ID<r1nPs-mX-15@gated-at.bofh.it>
In reply to#1330618
On Fri, Feb 12, 2016 at 1:20 PM, Rob Herring <robh@kernel.org> wrote:

> This is what the gpio flags are for. Why can't you use that?

This has already been discussed in v1:
https://lkml.org/lkml/2016/2/8/867

[toc] | [prev] | [next] | [standalone]

#1333069

FromRob Herring <robh@kernel.org>
Date2016-02-12 20:50 +0100
Message-ID<r1rT4-2Vc-25@gated-at.bofh.it>
In reply to#1332807
On Fri, Feb 12, 2016 at 9:24 AM, Fabio Estevam <festevam@gmail.com> wrote:
> On Fri, Feb 12, 2016 at 1:20 PM, Rob Herring <robh@kernel.org> wrote:
>
>> This is what the gpio flags are for. Why can't you use that?
>
> This has already been discussed in v1:
> https://lkml.org/lkml/2016/2/8/867

Thanks. That's fine, but that detail should be explained in the
binding. Is there a specific compatible string this can be limited to?
It should also be stated that the GPIO flags should be correct rather
than ignored implying I can put in whatever I want there. Then someday
if no more wrong dtbs are in the wild, it can switch back to using
gpio flags. Also, phy-reset-active-low should be prefixed with "fsl,".

Rob

[toc] | [prev] | [next] | [standalone]

#1332809

FromRob Herring <robh@kernel.org>
Date2016-02-12 16:30 +0100
Message-ID<r1nPs-mX-17@gated-at.bofh.it>
In reply to#1330618
On Tue, Feb 09, 2016 at 09:01:12PM +0100, Bernhard Walle wrote:
> We need that for a custom hardware that needs the reverse reset
> sequence.
> 
> Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
> ---
> Changes compared to v1:
>  - Add documentation to 'phy-reset-gpios' that flags are ignored
>    as suggested by Andrew Lunn.
> 
>  Documentation/devicetree/bindings/net/fsl-fec.txt | 7 ++++++-
>  drivers/net/ethernet/freescale/fec_main.c         | 8 ++++++--
>  2 files changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
> index a9eb611..0caa429 100644
> --- a/Documentation/devicetree/bindings/net/fsl-fec.txt
> +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
> @@ -7,11 +7,16 @@ Required properties:
>  - phy-mode : See ethernet.txt file in the same directory
>  
>  Optional properties:
> -- phy-reset-gpios : Should specify the gpio for phy reset
> +- phy-reset-gpios : Should specify the gpio for phy reset. Additional
> +  flags are ignored, see the non-standard 'phy-reset-active-low' property
> +  instead.
>  - phy-reset-duration : Reset duration in milliseconds.  Should present
>    only if property "phy-reset-gpios" is available.  Missing the property
>    will have the duration be 1 millisecond.  Numbers greater than 1000 are
>    invalid and 1 millisecond will be used instead.
> +- phy-reset-active-low : If present then the reset sequence using the GPIO
> +  specified in the "phy-reset-gpios" property is reversed (H=reset state,
> +  L=operation state).

This is what the gpio flags are for. Why can't you use that?

>  - phy-supply : regulator that powers the Ethernet PHY.
>  - phy-handle : phandle to the PHY device connected to this device.
>  - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.

[toc] | [prev] | [next] | [standalone]

#1338968

FromSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date2016-02-21 20:40 +0100
Message-ID<r4I1l-2pb-29@gated-at.bofh.it>
In reply to#1330618
Hello.

On 02/09/2016 11:01 PM, Bernhard Walle wrote:

> We need that for a custom hardware that needs the reverse reset
> sequence.
>
> Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
> ---
> Changes compared to v1:
>   - Add documentation to 'phy-reset-gpios' that flags are ignored
>     as suggested by Andrew Lunn.
>
>   Documentation/devicetree/bindings/net/fsl-fec.txt | 7 ++++++-
>   drivers/net/ethernet/freescale/fec_main.c         | 8 ++++++--
>   2 files changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
> index a9eb611..0caa429 100644
> --- a/Documentation/devicetree/bindings/net/fsl-fec.txt
> +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
> @@ -7,11 +7,16 @@ Required properties:
>   - phy-mode : See ethernet.txt file in the same directory
>
>   Optional properties:
> -- phy-reset-gpios : Should specify the gpio for phy reset
> +- phy-reset-gpios : Should specify the gpio for phy reset. Additional
> +  flags are ignored, see the non-standard 'phy-reset-active-low' property
> +  instead.
>   - phy-reset-duration : Reset duration in milliseconds.  Should present
>     only if property "phy-reset-gpios" is available.  Missing the property
>     will have the duration be 1 millisecond.  Numbers greater than 1000 are
>     invalid and 1 millisecond will be used instead.
> +- phy-reset-active-low : If present then the reset sequence using the GPIO
> +  specified in the "phy-reset-gpios" property is reversed (H=reset state,
> +  L=operation state).

    It would be active high reset, no?

>   - phy-supply : regulator that powers the Ethernet PHY.
>   - phy-handle : phandle to the PHY device connected to this device.
>   - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
> diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
> index 41c81f6..98caf87 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -3229,6 +3229,7 @@ static int fec_enet_init(struct net_device *ndev)
>   static void fec_reset_phy(struct platform_device *pdev)
>   {
>   	int err, phy_reset;
> +	bool active_low = false;
>   	int msec = 1;
>   	struct device_node *np = pdev->dev.of_node;
>
> @@ -3244,14 +3245,17 @@ static void fec_reset_phy(struct platform_device *pdev)
>   	if (!gpio_is_valid(phy_reset))
>   		return;
>
> +	active_low = of_property_read_bool(np, "phy-reset-active-low");
> +
>   	err = devm_gpio_request_one(&pdev->dev, phy_reset,
> -				    GPIOF_OUT_INIT_LOW, "phy-reset");
> +			active_low ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
> +			"phy-reset");
>   	if (err) {
>   		dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
>   		return;
>   	}
>   	msleep(msec);
> -	gpio_set_value_cansleep(phy_reset, 1);
> +	gpio_set_value_cansleep(phy_reset, !active_low);

    I believe the above expressions should be inverted.

MBR, Sergei

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web