Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1330829 > unrolled thread
| Started by | Greg KH <gregkh@linuxfoundation.org> |
|---|---|
| First post | 2016-02-10 02:30 +0100 |
| Last post | 2016-02-10 20:40 +0100 |
| Articles | 3 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH v5 0/5] Devicetree support for misc/eeprom/eeprom_93xx46. Greg KH <gregkh@linuxfoundation.org> - 2016-02-10 02:30 +0100
[PATCH v6 0/2] Atmel AT93C46D and GPIO 'select' support for eeprom_93xx46. Cory Tusar <cory.tusar@pid1solutions.com> - 2016-02-10 20:40 +0100
[PATCH v6 2/2] misc: eeprom_93xx46: Add support for a GPIO 'select' line. Cory Tusar <cory.tusar@pid1solutions.com> - 2016-02-10 20:40 +0100
| From | Greg KH <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-02-10 02:30 +0100 |
| Subject | Re: [PATCH v5 0/5] Devicetree support for misc/eeprom/eeprom_93xx46. |
| Message-ID | <r0rLs-3Iq-11@gated-at.bofh.it> |
On Wed, Jan 06, 2016 at 10:54:59PM -0500, Cory Tusar wrote: > This series of patches adds an initial set of devicetree bindings to the > eeprom_93xx46 driver which mirror the configuration options previously > available as a platform device. These bindings are then extended to > include support for specific Atmel devices in this family and also to > support GPIO-based selection of the device (e.g. for use with an SPI bus > mux). > > Additionally, an address aliasing issue with 16-bit read and write > accesses in the eeprom_93xx46 driver discovered during testing is fixed. Not all of these applied, please fix up and resend the patch that I couldn't apply. thanks, greg k-h
[toc] | [next] | [standalone]
| From | Cory Tusar <cory.tusar@pid1solutions.com> |
|---|---|
| Date | 2016-02-10 20:40 +0100 |
| Subject | [PATCH v6 0/2] Atmel AT93C46D and GPIO 'select' support for eeprom_93xx46. |
| Message-ID | <r0IMi-6Am-9@gated-at.bofh.it> |
| In reply to | #1330829 |
This series of patches extends recently accepted devicetree bindings in the
eeprom_93xx46 driver to include support for a specific Atmel device in this
family, and also to support GPIO-based selection of the device (e.g. for use
with an SPI bus mux).
Changes since v5:
- Dropped patches 1-3 which were already accepted.
- Rebased and re-tested atop the 'char-misc-testing' branch of
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
Changes since v4:
- Only forward-declare 'struct gpio_desc' in eeprom_93xx46.h.
- Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Changes since v3:
- Tested-by: Chris Healy <chris.healy@zii.aero>
...on a separate i.MX51 platform with Microchip 93LC46A EEPROM.
Changes since v2:
- Changed node name to 'eeprom' in DT bindings example.
- Simplified several bits of return logic.
- Removed #ifdef CONFIG_OF.
- Allow compiler to handle promotion to bool return values.
- Reworked GPIO handling to use gpiod_* functions throughout (and
fixed an oversight where GPIO flags were being ignored).
Changes since v1:
- Consolidated all Documentation/devictree additions into a single patch.
- Clarified compatible string shall be only one of the supported values.
- Renamed the 'select-gpio' binding to 'select-gpios'.
Cory Tusar (2):
misc: eeprom_93xx46: Add quirks to support Atmel AT93C46D device.
misc: eeprom_93xx46: Add support for a GPIO 'select' line.
drivers/misc/eeprom/eeprom_93xx46.c | 161 ++++++++++++++++++++++++++++--------
include/linux/eeprom_93xx46.h | 9 ++
2 files changed, 135 insertions(+), 35 deletions(-)
--
2.4.10
[toc] | [prev] | [next] | [standalone]
| From | Cory Tusar <cory.tusar@pid1solutions.com> |
|---|---|
| Date | 2016-02-10 20:40 +0100 |
| Subject | [PATCH v6 2/2] misc: eeprom_93xx46: Add support for a GPIO 'select' line. |
| Message-ID | <r0IMi-6Am-19@gated-at.bofh.it> |
| In reply to | #1331456 |
This commit adds support to the eeprom_93x46 driver allowing a GPIO line
to function as a 'select' or 'enable' signal prior to accessing the
EEPROM.
Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com>
Tested-by: Chris Healy <chris.healy@zii.aero>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
---
drivers/misc/eeprom/eeprom_93xx46.c | 35 +++++++++++++++++++++++++++++++++++
include/linux/eeprom_93xx46.h | 3 +++
2 files changed, 38 insertions(+)
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
index a3c3136..f62ab29 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -10,11 +10,13 @@
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/gpio/consumer.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/sysfs.h>
@@ -343,6 +345,20 @@ static ssize_t eeprom_93xx46_store_erase(struct device *dev,
}
static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase);
+static void select_assert(void *context)
+{
+ struct eeprom_93xx46_dev *edev = context;
+
+ gpiod_set_value_cansleep(edev->pdata->select, 1);
+}
+
+static void select_deassert(void *context)
+{
+ struct eeprom_93xx46_dev *edev = context;
+
+ gpiod_set_value_cansleep(edev->pdata->select, 0);
+}
+
static const struct of_device_id eeprom_93xx46_of_table[] = {
{ .compatible = "eeprom-93xx46", },
{ .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, },
@@ -357,6 +373,8 @@ static int eeprom_93xx46_probe_dt(struct spi_device *spi)
struct device_node *np = spi->dev.of_node;
struct eeprom_93xx46_platform_data *pd;
u32 tmp;
+ int gpio;
+ enum of_gpio_flags of_flags;
int ret;
pd = devm_kzalloc(&spi->dev, sizeof(*pd), GFP_KERNEL);
@@ -381,6 +399,23 @@ static int eeprom_93xx46_probe_dt(struct spi_device *spi)
if (of_property_read_bool(np, "read-only"))
pd->flags |= EE_READONLY;
+ gpio = of_get_named_gpio_flags(np, "select-gpios", 0, &of_flags);
+ if (gpio_is_valid(gpio)) {
+ unsigned long flags =
+ of_flags == OF_GPIO_ACTIVE_LOW ? GPIOF_ACTIVE_LOW : 0;
+
+ ret = devm_gpio_request_one(&spi->dev, gpio, flags,
+ "eeprom_93xx46_select");
+ if (ret)
+ return ret;
+
+ pd->select = gpio_to_desc(gpio);
+ pd->prepare = select_assert;
+ pd->finish = select_deassert;
+
+ gpiod_direction_output(pd->select, 0);
+ }
+
if (of_id->data) {
const struct eeprom_93xx46_devtype_data *data = of_id->data;
diff --git a/include/linux/eeprom_93xx46.h b/include/linux/eeprom_93xx46.h
index 92fa4c3..885f587 100644
--- a/include/linux/eeprom_93xx46.h
+++ b/include/linux/eeprom_93xx46.h
@@ -3,6 +3,8 @@
* platform description for 93xx46 EEPROMs.
*/
+struct gpio_desc;
+
struct eeprom_93xx46_platform_data {
unsigned char flags;
#define EE_ADDR8 0x01 /* 8 bit addr. cfg */
@@ -21,4 +23,5 @@ struct eeprom_93xx46_platform_data {
*/
void (*prepare)(void *);
void (*finish)(void *);
+ struct gpio_desc *select;
};
--
2.4.10
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web