Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1278861 > unrolled thread

[PATCH v3 net 5/6] net: mvneta: enable setting custom TX IP checksum limit

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v3 net 5/6] net: mvneta: enable setting custom TX IP checksum limit Marcin Wojtas <mw@semihalf.com> - 2015-11-27 16:50 +0100

#1278861 — [PATCH v3 net 5/6] net: mvneta: enable setting custom TX IP checksum limit

Since Armada 38x SoC can support IP checksum for jumbo frames only on
a single port, it means that this feature should be enabled per-port,
rather than for the whole SoC.

This patch enables setting custom TX IP checksum limit by adding new
optional property to the mvneta device tree node. If not used, by
default 1600B is set for "marvell,armada-370-neta" and 9800B for other
strings, which ensures backward compatibility. Binding documentation
is updated accordingly.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
 .../bindings/net/marvell-armada-370-neta.txt          |  6 ++++++
 drivers/net/ethernet/marvell/mvneta.c                 | 19 +++++++++++++++++--
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index f5a8ca2..aeea50c 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -8,6 +8,11 @@ Required properties:
 - phy-mode: See ethernet.txt file in the same directory
 - clocks: a pointer to the reference clock for this device.
 
+Optional properties:
+- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
+  Value is presented in bytes. If not used, by default 1600B is set for
+  "marvell,armada-370-neta" and 9800B for others.
+
 Example:
 
 ethernet@d0070000 {
@@ -15,6 +20,7 @@ ethernet@d0070000 {
 	reg = <0xd0070000 0x2500>;
 	interrupts = <8>;
 	clocks = <&gate_clk 4>;
+	tx-csum-limit = <9800>
 	status = "okay";
 	phy = <&phy0>;
 	phy-mode = "rgmii-id";
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 5a98c5d..ed622fa 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -243,6 +243,7 @@
 #define MVNETA_VLAN_TAG_LEN             4
 
 #define MVNETA_CPU_D_CACHE_LINE_SIZE    32
+#define MVNETA_TX_CSUM_DEF_SIZE		1600
 #define MVNETA_TX_CSUM_MAX_SIZE		9800
 #define MVNETA_ACC_MODE_EXT		1
 
@@ -3256,6 +3257,7 @@ static int mvneta_probe(struct platform_device *pdev)
 	char hw_mac_addr[ETH_ALEN];
 	const char *mac_from;
 	const char *managed;
+	int tx_csum_limit;
 	int phy_mode;
 	int err;
 	int cpu;
@@ -3356,8 +3358,21 @@ static int mvneta_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (of_device_is_compatible(dn, "marvell,armada-370-neta"))
-		pp->tx_csum_limit = 1600;
+	if (!of_property_read_u32(dn, "tx-csum-limit", &tx_csum_limit)) {
+		if (tx_csum_limit < 0 ||
+		    tx_csum_limit > MVNETA_TX_CSUM_MAX_SIZE) {
+			tx_csum_limit = MVNETA_TX_CSUM_DEF_SIZE;
+			dev_info(&pdev->dev,
+				 "Wrong TX csum limit in DT, set to %dB\n",
+				 MVNETA_TX_CSUM_DEF_SIZE);
+		}
+	} else if (of_device_is_compatible(dn, "marvell,armada-370-neta")) {
+		tx_csum_limit = MVNETA_TX_CSUM_DEF_SIZE;
+	} else {
+		tx_csum_limit = MVNETA_TX_CSUM_MAX_SIZE;
+	}
+
+	pp->tx_csum_limit = tx_csum_limit;
 
 	pp->tx_ring_size = MVNETA_MAX_TXD;
 	pp->rx_ring_size = MVNETA_MAX_RXD;
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web