Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1279120 > unrolled thread

[PATCH] pinctrl: mvebu: complain about missing group after checking variant

Started bySebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
First post2015-11-28 11:20 +0100
Last post2015-11-28 11:30 +0100
Articles 3 — 1 participant

Back to article view | Back to linux.kernel


Contents

  [PATCH] pinctrl: mvebu: complain about missing group after checking variant Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> - 2015-11-28 11:20 +0100
    Re: [PATCH] pinctrl: mvebu: complain about missing group after  checking variant Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> - 2015-11-28 11:20 +0100
    [PATCH v2] pinctrl: mvebu: complain about missing group after checking variant Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> - 2015-11-28 11:30 +0100

#1279120 — [PATCH] pinctrl: mvebu: complain about missing group after checking variant

FromSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date2015-11-28 11:20 +0100
Subject[PATCH] pinctrl: mvebu: complain about missing group after checking variant
Message-ID<qzKLL-7xO-5@gated-at.bofh.it>
Common MVEBU pinctrl driver core gets an array of controls to modify
a specific set of registers and an array of modes for each pingroup
from each of the different SoC families of MVEBU.

Some SoC families comprise different variants that differ in available
pingroups and also controls, but to ease driver development, we can
pass a variant mask to disable specific pingroups for some variants.
However, controls are limited to the true number of pinctrl groups
available on a variant.

Now, when pinctrl core driver parses over above arrays, it tries to
match modes with available controls and complains about missing
controls for modes that are passed to the core but actually are not
available on a variant with:

kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 36

This warning is a false-positive and annoying, so move the warning
after we checked the variant mask for each mode setting. Also, if
there is no supported setting for this variant, do not complain at
all.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reported-by: Linus Walleij <linus.walleij@linaro.org>
---
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/pinctrl/mvebu/pinctrl-mvebu.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/mvebu/pinctrl-mvebu.c b/drivers/pinctrl/mvebu/pinctrl-mvebu.c
index 77d2221d379d..dbc95369317a 100644
--- a/drivers/pinctrl/mvebu/pinctrl-mvebu.c
+++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.c
@@ -663,16 +663,9 @@ int mvebu_pinctrl_probe(struct platform_device *pdev)
 	/* assign mpp modes to groups */
 	for (n = 0; n < soc->nmodes; n++) {
 		struct mvebu_mpp_mode *mode = &soc->modes[n];
-		struct mvebu_pinctrl_group *grp =
-			mvebu_pinctrl_find_group_by_pid(pctl, mode->pid);
+		struct mvebu_pinctrl_group *grp;
 		unsigned num_settings;
 
-		if (!grp) {
-			dev_warn(&pdev->dev, "unknown pinctrl group %d\n",
-				mode->pid);
-			continue;
-		}
-
 		for (num_settings = 0; ;) {
 			struct mvebu_mpp_ctrl_setting *set =
 				&mode->settings[num_settings];
@@ -695,6 +688,17 @@ int mvebu_pinctrl_probe(struct platform_device *pdev)
 				set->flags = MVEBU_SETTING_GPI;
 		}
 
+		/* skip modes with no settings for this variant */
+		if (!num_settings)
+			continue;
+
+		grp = mvebu_pinctrl_find_group_by_pid(pctl, mode->pid);
+		if (!grp) {
+			dev_warn(&pdev->dev, "unknown pinctrl group %d\n",
+				mode->pid);
+			continue;
+		}
+
 		grp->settings = mode->settings;
 		grp->num_settings = num_settings;
 	}
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]


#1279121 — Re: [PATCH] pinctrl: mvebu: complain about missing group after checking variant

FromSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date2015-11-28 11:20 +0100
SubjectRe: [PATCH] pinctrl: mvebu: complain about missing group after checking variant
Message-ID<qzKLL-7xO-7@gated-at.bofh.it>
In reply to#1279120
On 28.11.2015 11:14, Sebastian Hesselbarth wrote:
> Common MVEBU pinctrl driver core gets an array of controls to modify
> a specific set of registers and an array of modes for each pingroup
> from each of the different SoC families of MVEBU.
> 
> Some SoC families comprise different variants that differ in available
> pingroups and also controls, but to ease driver development, we can
> pass a variant mask to disable specific pingroups for some variants.
> However, controls are limited to the true number of pinctrl groups
> available on a variant.
> 
> Now, when pinctrl core driver parses over above arrays, it tries to
> match modes with available controls and complains about missing
> controls for modes that are passed to the core but actually are not
> available on a variant with:
> 
> kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 36
> 
> This warning is a false-positive and annoying, so move the warning
> after we checked the variant mask for each mode setting. Also, if
> there is no supported setting for this variant, do not complain at
> all.
> 
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> Reported-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Simon Guinot <simon.guinot@sequanux.org>
> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Gregory Clement <gregory.clement@free-electrons.com>
> Cc: linux-gpio@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> ---
>  drivers/pinctrl/mvebu/pinctrl-mvebu.c | 20 ++++++++++++--------
>  1 file changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/pinctrl/mvebu/pinctrl-mvebu.c b/drivers/pinctrl/mvebu/pinctrl-mvebu.c
> index 77d2221d379d..dbc95369317a 100644
> --- a/drivers/pinctrl/mvebu/pinctrl-mvebu.c
> +++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.c
> @@ -663,16 +663,9 @@ int mvebu_pinctrl_probe(struct platform_device *pdev)
>  	/* assign mpp modes to groups */
>  	for (n = 0; n < soc->nmodes; n++) {
>  		struct mvebu_mpp_mode *mode = &soc->modes[n];
> -		struct mvebu_pinctrl_group *grp =
> -			mvebu_pinctrl_find_group_by_pid(pctl, mode->pid);
> +		struct mvebu_pinctrl_group *grp;
>  		unsigned num_settings;
>  
> -		if (!grp) {
> -			dev_warn(&pdev->dev, "unknown pinctrl group %d\n",
> -				mode->pid);
> -			continue;
> -		}
> -
>  		for (num_settings = 0; ;) {
>  			struct mvebu_mpp_ctrl_setting *set =
>  				&mode->settings[num_settings];
> @@ -695,6 +688,17 @@ int mvebu_pinctrl_probe(struct platform_device *pdev)
>  				set->flags = MVEBU_SETTING_GPI;
>  		}
>  
> +		/* skip modes with no settings for this variant */

Erm, dammit. This does not work as expected.
The loop right over this does increment num_settings unconditionally.

I'll have to find a better solution...

Sebastian

> +		if (!num_settings)
> +			continue;
> +
> +		grp = mvebu_pinctrl_find_group_by_pid(pctl, mode->pid);
> +		if (!grp) {
> +			dev_warn(&pdev->dev, "unknown pinctrl group %d\n",
> +				mode->pid);
> +			continue;
> +		}
> +
>  		grp->settings = mode->settings;
>  		grp->num_settings = num_settings;
>  	}
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]


#1279123 — [PATCH v2] pinctrl: mvebu: complain about missing group after checking variant

FromSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date2015-11-28 11:30 +0100
Subject[PATCH v2] pinctrl: mvebu: complain about missing group after checking variant
Message-ID<qzKVs-7AO-11@gated-at.bofh.it>
In reply to#1279120
Common MVEBU pinctrl driver core gets an array of controls to modify
a specific set of registers and an array of modes for each pingroup
from each of the different SoC families of MVEBU.

Some SoC families comprise different variants that differ in available
pingroups and also controls, but to ease driver development, we can
pass a variant mask to disable specific pingroups for some variants.
However, controls are limited to the true number of pinctrl groups
avaiable on a variant.

Now, when pinctrl core driver parses over above arrays, it tries to
match modes with available controls and complains about missing
controls for modes that are passed to the core but actually are not
avaiable on a variant with:

kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 36

This warning is a false-positive and annoying, so move the warning
after we checked the variant mask for each mode setting. Also, if
there is no supported setting for this variant, do not complain at
all.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reported-by: Linus Walleij <linus.walleij@linaro.org>
---
Changelog:
v1->v2:
- modify settings loop to allow to check for !num_settings

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/pinctrl/mvebu/pinctrl-mvebu.c | 29 ++++++++++++++++-------------
 1 file changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/pinctrl/mvebu/pinctrl-mvebu.c b/drivers/pinctrl/mvebu/pinctrl-mvebu.c
index 77d2221d379d..e4d473811bb3 100644
--- a/drivers/pinctrl/mvebu/pinctrl-mvebu.c
+++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.c
@@ -663,28 +663,20 @@ int mvebu_pinctrl_probe(struct platform_device *pdev)
 	/* assign mpp modes to groups */
 	for (n = 0; n < soc->nmodes; n++) {
 		struct mvebu_mpp_mode *mode = &soc->modes[n];
-		struct mvebu_pinctrl_group *grp =
-			mvebu_pinctrl_find_group_by_pid(pctl, mode->pid);
+		struct mvebu_mpp_ctrl_setting *set = &mode->settings[0];
+		struct mvebu_pinctrl_group *grp;
 		unsigned num_settings;
 
-		if (!grp) {
-			dev_warn(&pdev->dev, "unknown pinctrl group %d\n",
-				mode->pid);
-			continue;
-		}
-
-		for (num_settings = 0; ;) {
-			struct mvebu_mpp_ctrl_setting *set =
-				&mode->settings[num_settings];
-
+		for (num_settings = 0; ; set++) {
 			if (!set->name)
 				break;
-			num_settings++;
 
 			/* skip unsupported settings for this variant */
 			if (pctl->variant && !(pctl->variant & set->variant))
 				continue;
 
+			num_settings++;
+
 			/* find gpio/gpo/gpi settings */
 			if (strcmp(set->name, "gpio") == 0)
 				set->flags = MVEBU_SETTING_GPI |
@@ -695,6 +687,17 @@ int mvebu_pinctrl_probe(struct platform_device *pdev)
 				set->flags = MVEBU_SETTING_GPI;
 		}
 
+		/* skip modes with no settings for this variant */
+		if (!num_settings)
+			continue;
+
+		grp = mvebu_pinctrl_find_group_by_pid(pctl, mode->pid);
+		if (!grp) {
+			dev_warn(&pdev->dev, "unknown pinctrl group %d\n",
+				mode->pid);
+			continue;
+		}
+
 		grp->settings = mode->settings;
 		grp->num_settings = num_settings;
 	}
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web