Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1271349 > unrolled thread

Re: [PATCH] clk: add generic driver for fixed rate clock

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH] clk: add generic driver for fixed rate clock Geert Uytterhoeven <geert@linux-m68k.org> - 2015-11-17 16:50 +0100
    Re: [PATCH] clk: add generic driver for fixed rate clock Stephen Boyd <sboyd@codeaurora.org> - 2015-11-18 21:40 +0100
      Re: [PATCH] clk: add generic driver for fixed rate clock Geert Uytterhoeven <geert@linux-m68k.org> - 2015-11-18 22:50 +0100
    Re: [PATCH] clk: add generic driver for fixed rate clock Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> - 2015-11-19 21:40 +0100

#1271349 — Re: [PATCH] clk: add generic driver for fixed rate clock

Hi Stefan,

(quoting the full driver, as it predates linux-clk)

On Sun, Sep 1, 2013 at 6:40 AM, Stefan Kristiansson
<stefan.kristiansson@saunalahti.fi> wrote:
> This adds a simple driver with the only purpose to initialise
> the fixed rate clock.
> This is useful for systems that do not wish to use seperate init
> code for the fixed rate clock init, but rather only rely on a
> device tree description of it.
>
> Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>

Thanks, this is still very useful!

I stumbled across this old patch while trying to instantiate a fixed rate
clock from a DT overlay.
Without this, the clock is never instantiated, as drivers/clk/clk-fixed-rate.c
uses CLK_OF_DECLARE() :-( With your driver, it works as expected
(after fixing the modpost complaint, cfr. below).

However, I think that instead of creating a new driver, you should just add
the meat of clk-generic-fixed.c to clk-fixed-rate.c.

> ---
>  drivers/clk/Kconfig             |  8 ++++++
>  drivers/clk/Makefile            |  1 +
>  drivers/clk/clk-generic-fixed.c | 59 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 68 insertions(+)
>  create mode 100644 drivers/clk/clk-generic-fixed.c
>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 51380d6..7c8ea78 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -87,6 +87,14 @@ config CLK_PPC_CORENET
>           This adds the clock driver support for Freescale PowerPC corenet
>           platforms using common clock framework.
>
> +config COMMON_CLK_GENERIC_FIXED
> +       tristate "Generic fixed rate clock driver"
> +       depends on OF
> +       ---help---
> +         Driver for systems that do not want to register their fixed rate
> +         clocks through init code, but rather through the device tree
> +         description.
> +
>  endmenu
>
>  source "drivers/clk/mvebu/Kconfig"
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 4038c2b..2d46647 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_COMMON_CLK)        += clk-fixed-rate.o
>  obj-$(CONFIG_COMMON_CLK)       += clk-gate.o
>  obj-$(CONFIG_COMMON_CLK)       += clk-mux.o
>  obj-$(CONFIG_COMMON_CLK)       += clk-composite.o
> +obj-$(CONFIG_COMMON_CLK_GENERIC_FIXED) += clk-generic-fixed.o
>
>  # SoCs specific
>  obj-$(CONFIG_ARCH_BCM2835)     += clk-bcm2835.o
> diff --git a/drivers/clk/clk-generic-fixed.c b/drivers/clk/clk-generic-fixed.c
> new file mode 100644
> index 0000000..85df8a8
> --- /dev/null
> +++ b/drivers/clk/clk-generic-fixed.c
> @@ -0,0 +1,59 @@
> +/*
> + * Copyright 2013 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Generic driver for fixed rate clock
> + */
> +#include <linux/platform_device.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clk.h>
> +#include <linux/of.h>
> +#include <linux/module.h>
> +
> +static const struct of_device_id generic_fixed_clk_match[] __initconst = {

Please drop the __initconst, as it causes a section mismatch.

> +       { .compatible = "fixed-clock",},
> +       {}
> +};
> +
> +static int generic_fixed_clk_probe(struct platform_device *pdev)
> +{
> +       of_fixed_clk_setup(pdev->dev.of_node);
> +
> +       return 0;
> +}
> +
> +static int generic_fixed_clk_remove(struct platform_device *pdev)
> +{
> +       of_clk_del_provider(pdev->dev.of_node);
> +
> +       return 0;
> +}
> +
> +static struct platform_driver generic_fixed_clk_driver = {
> +       .driver = {
> +               .name = "generic-fixed-clk",
> +               .owner = THIS_MODULE,
> +               .of_match_table = generic_fixed_clk_match,
> +       },
> +       .probe  = generic_fixed_clk_probe,
> +       .remove = generic_fixed_clk_remove,
> +};
> +
> +static int __init generic_fixed_clk_init(void)
> +{
> +       return platform_driver_register(&generic_fixed_clk_driver);
> +}
> +subsys_initcall(generic_fixed_clk_init);
> +
> +static void __exit generic_fixed_exit(void)
> +{
> +       platform_driver_unregister(&generic_fixed_clk_driver);
> +}
> +module_exit(generic_fixed_exit);
> +
> +MODULE_AUTHOR("Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>");
> +MODULE_DESCRIPTION("Generic driver for fixed rate clock");
> +MODULE_LICENSE("GPL v2");

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]

#1272548

On 11/17, Geert Uytterhoeven wrote:
> Hi Stefan,
> 
> (quoting the full driver, as it predates linux-clk)
> 
> On Sun, Sep 1, 2013 at 6:40 AM, Stefan Kristiansson
> <stefan.kristiansson@saunalahti.fi> wrote:
> > This adds a simple driver with the only purpose to initialise
> > the fixed rate clock.
> > This is useful for systems that do not wish to use seperate init
> > code for the fixed rate clock init, but rather only rely on a
> > device tree description of it.
> >
> > Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
> 
> Thanks, this is still very useful!
> 
> I stumbled across this old patch while trying to instantiate a fixed rate
> clock from a DT overlay.
> Without this, the clock is never instantiated, as drivers/clk/clk-fixed-rate.c
> uses CLK_OF_DECLARE() :-( With your driver, it works as expected
> (after fixing the modpost complaint, cfr. below).
> 
> However, I think that instead of creating a new driver, you should just add
> the meat of clk-generic-fixed.c to clk-fixed-rate.c.

Hm... what happens when of_clk_init() runs and instantiates the
clock, and then of_platform_populate() runs and creates the clock
again? The platform device probe fails because the framework
checks to make sure two clocks don't have the same name? I guess
that's going to work, but it doesn't make me feel good.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1272605

Hi Stephen,

On Wed, Nov 18, 2015 at 9:34 PM, Stephen Boyd <sboyd@codeaurora.org> wrote:
> On 11/17, Geert Uytterhoeven wrote:
>> (quoting the full driver, as it predates linux-clk)
>>
>> On Sun, Sep 1, 2013 at 6:40 AM, Stefan Kristiansson
>> <stefan.kristiansson@saunalahti.fi> wrote:
>> > This adds a simple driver with the only purpose to initialise
>> > the fixed rate clock.
>> > This is useful for systems that do not wish to use seperate init
>> > code for the fixed rate clock init, but rather only rely on a
>> > device tree description of it.
>> >
>> > Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
>>
>> Thanks, this is still very useful!
>>
>> I stumbled across this old patch while trying to instantiate a fixed rate
>> clock from a DT overlay.
>> Without this, the clock is never instantiated, as drivers/clk/clk-fixed-rate.c
>> uses CLK_OF_DECLARE() :-( With your driver, it works as expected
>> (after fixing the modpost complaint, cfr. below).
>>
>> However, I think that instead of creating a new driver, you should just add
>> the meat of clk-generic-fixed.c to clk-fixed-rate.c.
>
> Hm... what happens when of_clk_init() runs and instantiates the
> clock, and then of_platform_populate() runs and creates the clock
> again? The platform device probe fails because the framework
> checks to make sure two clocks don't have the same name? I guess
> that's going to work, but it doesn't make me feel good.

My DTS does have other clocks that are compatible with "fixed-clock"
and I didn't notice any ill behavior. Perhaps the driver core knows the
node has already been bound to something, and thus no longer tries
to bind it to a platform driver?

I'll double-check that later...

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1273479

On Tue, Nov 17, 2015 at 04:46:29PM +0100, Geert Uytterhoeven wrote:
> Thanks, this is still very useful!
> 
> I stumbled across this old patch while trying to instantiate a fixed rate
> clock from a DT overlay.
> Without this, the clock is never instantiated, as drivers/clk/clk-fixed-rate.c
> uses CLK_OF_DECLARE() :-( With your driver, it works as expected
> (after fixing the modpost complaint, cfr. below).
>

Ah, I'm glad that this old thing was of use to someone else than me ;)

> However, I think that instead of creating a new driver, you should just add
> the meat of clk-generic-fixed.c to clk-fixed-rate.c.

Sure, that sounds reasonable, I'll take a second bat at this patch and do that.

Stefan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web