Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1273573 > unrolled thread

[PATCH v2 0/3] ARM: dts: add support for NS, NSP, and NS2 clocks

Started byJon Mason <jonmason@broadcom.com>
First post2015-11-20 00:10 +0100
Last post2015-11-20 16:20 +0100
Articles 4 — 2 participants

Back to article view | Back to linux.kernel

Contents

  [PATCH v2 0/3] ARM: dts: add support for NS, NSP, and NS2 clocks Jon Mason <jonmason@broadcom.com> - 2015-11-20 00:10 +0100
    [PATCH v2 2/3] ARM: dts: enable clock support for Broadcom NSP Jon Mason <jonmason@broadcom.com> - 2015-11-20 00:10 +0100
      Re: [PATCH v2 2/3] ARM: dts: enable clock support for Broadcom NSP Ray Jui <rjui@broadcom.com> - 2015-11-20 00:50 +0100
        Re: [PATCH v2 2/3] ARM: dts: enable clock support for Broadcom NSP Jon Mason <jonmason@broadcom.com> - 2015-11-20 16:20 +0100

#1273573 — [PATCH v2 0/3] ARM: dts: add support for NS, NSP, and NS2 clocks

FromJon Mason <jonmason@broadcom.com>
Date2015-11-20 00:10 +0100
Subject[PATCH v2 0/3] ARM: dts: add support for NS, NSP, and NS2 clocks
Message-ID<qwGuZ-7ug-3@gated-at.bofh.it>
Changes in v2:
Rebased off of outstanding NSP DT patches and tweaked the entry names
per Ray Jui


This patch series adds device tree support for the Broadcom Northstar,
Northstar Plus, and Northstar 2 clocks.

Last sent as an RFC (see https://lkml.org/lkml/2015/10/13/882) due to
the inability to merge because of the driver dependencies.  Those
necessary driver changes were merged into 4.4.  All comments have been
addressed and it is ready to be pulled in.


Jon Mason (3):
  ARM: dts: enable clock support for BCM5301X
  ARM: dts: enable clock support for Broadcom NSP
  ARM64: dts: enable clock support for Broadcom NS2

 arch/arm/boot/dts/bcm-nsp.dtsi        | 77 ++++++++++++++++++++++++-----
 arch/arm/boot/dts/bcm5301x.dtsi       | 92 +++++++++++++++++++++++++++--------
 arch/arm64/boot/dts/broadcom/ns2.dtsi | 80 +++++++++++++++++++++++++++++-
 3 files changed, 214 insertions(+), 35 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]

#1273574 — [PATCH v2 2/3] ARM: dts: enable clock support for Broadcom NSP

FromJon Mason <jonmason@broadcom.com>
Date2015-11-20 00:10 +0100
Subject[PATCH v2 2/3] ARM: dts: enable clock support for Broadcom NSP
Message-ID<qwGv0-7ug-15@gated-at.bofh.it>
In reply to#1273573
Replace current device tree dummy clocks with real clock support for
Broadcom Northstar Plus SoC

Signed-off-by: Jon Mason <jonmason@broadcom.com>
---
 arch/arm/boot/dts/bcm-nsp.dtsi | 77 +++++++++++++++++++++++++++++++++++-------
 1 file changed, 64 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index b74438c..361c2a6 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -32,6 +32,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-nsp.h>
 
 #include "skeleton.dtsi"
 
@@ -42,7 +43,7 @@
 
 	mpcore {
 		compatible = "simple-bus";
-		ranges = <0x00000000 0x19020000 0x00003000>;
+		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -58,16 +59,23 @@
 			};
 		};
 
+		a9pll: arm_clk@0000 {
+			#clock-cells = <0>;
+			compatible = "brcm,nsp-armpll";
+			clocks = <&osc>;
+			reg = <0x0000 0x1000>;
+		};
+
 		timer@0200 {
 			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x0200 0x100>;
+			reg = <0x20200 0x100>;
 			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&periph_clk>;
 		};
 
 		twd-timer@0600 {
 			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x0600 0x20>;
+			reg = <0x20600 0x20>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
 						  IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&periph_clk>;
@@ -75,7 +83,7 @@
 
 		twd-watchdog@0620 {
 			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0x0620 0x20>;
+			reg = <0x20620 0x20>;
 			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
 						  IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&periph_clk>;
@@ -86,13 +94,13 @@
 			#interrupt-cells = <3>;
 			#address-cells = <0>;
 			interrupt-controller;
-			reg = <0x1000 0x1000>,
-			      <0x0100 0x100>;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
 		};
 
 		L2: l2-cache {
 			compatible = "arm,pl310-cache";
-			reg = <0x2000 0x1000>;
+			reg = <0x22000 0x1000>;
 			cache-unified;
 			cache-level = <2>;
 		};
@@ -103,10 +111,34 @@
 		#size-cells = <1>;
 		ranges;
 
-		periph_clk: periph_clk {
+		osc: oscillator {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		periph_clk: periph_clk {
 			#clock-cells = <0>;
-			clock-frequency = <500000000>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
 		};
 	};
 
@@ -118,17 +150,17 @@
 
 		uart0: serial@0300 {
 			compatible = "ns16550a";
-			reg = <0x0300 0x100>;
+			reg = <0x000300 0x100>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <62499840>;
+			clocks = <&osc>;
 			status = "disabled";
 		};
 
 		uart1: serial@0400 {
 			compatible = "ns16550a";
-			reg = <0x0400 0x100>;
+			reg = <0x000400 0x100>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <62499840>;
+			clocks = <&osc>;
 			status = "disabled";
 		};
 
@@ -226,5 +258,24 @@
 			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
 			clock-frequency = <100000>;
 		};
+
+		lcpll0: lcpll0@3f100 {
+			#clock-cells = <1>;
+			compatible = "brcm,nsp-lcpll0";
+			reg = <0x3f100 0x14>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll0", "pcie_phy", "sdio",
+					     "ddr_phy";
+		};
+
+		genpll: genpll@3f140 {
+			#clock-cells = <1>;
+			compatible = "brcm,nsp-genpll";
+			reg = <0x3f140 0x24>;
+			clocks = <&osc>;
+			clock-output-names = "genpll", "phy", "ethernetclk",
+					     "usbclk", "iprocfast", "sata1",
+					     "sata2";
+		};
 	};
 };
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1273605 — Re: [PATCH v2 2/3] ARM: dts: enable clock support for Broadcom NSP

FromRay Jui <rjui@broadcom.com>
Date2015-11-20 00:50 +0100
SubjectRe: [PATCH v2 2/3] ARM: dts: enable clock support for Broadcom NSP
Message-ID<qwH7I-7KF-29@gated-at.bofh.it>
In reply to#1273574

On 11/19/2015 3:05 PM, Jon Mason wrote:
> Replace current device tree dummy clocks with real clock support for
> Broadcom Northstar Plus SoC
>
> Signed-off-by: Jon Mason <jonmason@broadcom.com>
> ---
>   arch/arm/boot/dts/bcm-nsp.dtsi | 77 +++++++++++++++++++++++++++++++++++-------
>   1 file changed, 64 insertions(+), 13 deletions(-)
>
> diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
> index b74438c..361c2a6 100644
> --- a/arch/arm/boot/dts/bcm-nsp.dtsi
> +++ b/arch/arm/boot/dts/bcm-nsp.dtsi
> @@ -32,6 +32,7 @@
>
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>   #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/clock/bcm-nsp.h>
>
>   #include "skeleton.dtsi"
>
> @@ -42,7 +43,7 @@
>
>   	mpcore {
>   		compatible = "simple-bus";
> -		ranges = <0x00000000 0x19020000 0x00003000>;
> +		ranges = <0x00000000 0x19000000 0x00023000>;
>   		#address-cells = <1>;
>   		#size-cells = <1>;
>
> @@ -58,16 +59,23 @@
>   			};
>   		};
>
> +		a9pll: arm_clk@0000 {
> +			#clock-cells = <0>;
> +			compatible = "brcm,nsp-armpll";
> +			clocks = <&osc>;
> +			reg = <0x0000 0x1000>;
> +		};
> +
>   		timer@0200 {

timer@20200. Or is this addressed in another patch? I completely lose 
track of these....

>   			compatible = "arm,cortex-a9-global-timer";
> -			reg = <0x0200 0x100>;
> +			reg = <0x20200 0x100>;
>   			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
>   			clocks = <&periph_clk>;
>   		};
>
>   		twd-timer@0600 {

twd-timer@20600

>   			compatible = "arm,cortex-a9-twd-timer";
> -			reg = <0x0600 0x20>;
> +			reg = <0x20600 0x20>;
>   			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
>   						  IRQ_TYPE_LEVEL_HIGH)>;
>   			clocks = <&periph_clk>;
> @@ -75,7 +83,7 @@
>
>   		twd-watchdog@0620 {

same here

>   			compatible = "arm,cortex-a9-twd-wdt";
> -			reg = <0x0620 0x20>;
> +			reg = <0x20620 0x20>;
>   			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
>   						  IRQ_TYPE_LEVEL_HIGH)>;
>   			clocks = <&periph_clk>;
> @@ -86,13 +94,13 @@
>   			#interrupt-cells = <3>;
>   			#address-cells = <0>;
>   			interrupt-controller;
> -			reg = <0x1000 0x1000>,
> -			      <0x0100 0x100>;
> +			reg = <0x21000 0x1000>,
> +			      <0x20100 0x100>;
>   		};
>
>   		L2: l2-cache {
>   			compatible = "arm,pl310-cache";
> -			reg = <0x2000 0x1000>;
> +			reg = <0x22000 0x1000>;
>   			cache-unified;
>   			cache-level = <2>;
>   		};
> @@ -103,10 +111,34 @@
>   		#size-cells = <1>;
>   		ranges;
>
> -		periph_clk: periph_clk {
> +		osc: oscillator {
> +			#clock-cells = <0>;
>   			compatible = "fixed-clock";
> +			clock-frequency = <25000000>;
> +		};
> +
> +		iprocmed: iprocmed {
> +			#clock-cells = <0>;
> +			compatible = "fixed-factor-clock";
> +			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
> +			clock-div = <2>;
> +			clock-mult = <1>;
> +		};
> +
> +		iprocslow: iprocslow {
> +			#clock-cells = <0>;
> +			compatible = "fixed-factor-clock";
> +			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
> +			clock-div = <4>;
> +			clock-mult = <1>;
> +		};
> +
> +		periph_clk: periph_clk {
>   			#clock-cells = <0>;
> -			clock-frequency = <500000000>;
> +			compatible = "fixed-factor-clock";
> +			clocks = <&a9pll>;
> +			clock-div = <2>;
> +			clock-mult = <1>;
>   		};
>   	};
>
> @@ -118,17 +150,17 @@
>
>   		uart0: serial@0300 {
>   			compatible = "ns16550a";
> -			reg = <0x0300 0x100>;
> +			reg = <0x000300 0x100>;
>   			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> -			clock-frequency = <62499840>;
> +			clocks = <&osc>;
>   			status = "disabled";
>   		};
>
>   		uart1: serial@0400 {
>   			compatible = "ns16550a";
> -			reg = <0x0400 0x100>;
> +			reg = <0x000400 0x100>;
>   			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> -			clock-frequency = <62499840>;
> +			clocks = <&osc>;
>   			status = "disabled";
>   		};
>
> @@ -226,5 +258,24 @@
>   			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
>   			clock-frequency = <100000>;
>   		};
> +
> +		lcpll0: lcpll0@3f100 {
> +			#clock-cells = <1>;
> +			compatible = "brcm,nsp-lcpll0";
> +			reg = <0x3f100 0x14>;
> +			clocks = <&osc>;
> +			clock-output-names = "lcpll0", "pcie_phy", "sdio",
> +					     "ddr_phy";
> +		};
> +
> +		genpll: genpll@3f140 {
> +			#clock-cells = <1>;
> +			compatible = "brcm,nsp-genpll";
> +			reg = <0x3f140 0x24>;
> +			clocks = <&osc>;
> +			clock-output-names = "genpll", "phy", "ethernetclk",
> +					     "usbclk", "iprocfast", "sata1",
> +					     "sata2";
> +		};
>   	};
>   };
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1274168 — Re: [PATCH v2 2/3] ARM: dts: enable clock support for Broadcom NSP

FromJon Mason <jonmason@broadcom.com>
Date2015-11-20 16:20 +0100
SubjectRe: [PATCH v2 2/3] ARM: dts: enable clock support for Broadcom NSP
Message-ID<qwVDI-uA-23@gated-at.bofh.it>
In reply to#1273605
On Thu, Nov 19, 2015 at 03:40:04PM -0800, Ray Jui wrote:
> 
> 
> On 11/19/2015 3:05 PM, Jon Mason wrote:
> >Replace current device tree dummy clocks with real clock support for
> >Broadcom Northstar Plus SoC
> >
> >Signed-off-by: Jon Mason <jonmason@broadcom.com>
> >---
> >  arch/arm/boot/dts/bcm-nsp.dtsi | 77 +++++++++++++++++++++++++++++++++++-------
> >  1 file changed, 64 insertions(+), 13 deletions(-)
> >
> >diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
> >index b74438c..361c2a6 100644
> >--- a/arch/arm/boot/dts/bcm-nsp.dtsi
> >+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
> >@@ -32,6 +32,7 @@
> >
> >  #include <dt-bindings/interrupt-controller/arm-gic.h>
> >  #include <dt-bindings/interrupt-controller/irq.h>
> >+#include <dt-bindings/clock/bcm-nsp.h>
> >
> >  #include "skeleton.dtsi"
> >
> >@@ -42,7 +43,7 @@
> >
> >  	mpcore {
> >  		compatible = "simple-bus";
> >-		ranges = <0x00000000 0x19020000 0x00003000>;
> >+		ranges = <0x00000000 0x19000000 0x00023000>;
> >  		#address-cells = <1>;
> >  		#size-cells = <1>;
> >
> >@@ -58,16 +59,23 @@
> >  			};
> >  		};
> >
> >+		a9pll: arm_clk@0000 {
> >+			#clock-cells = <0>;
> >+			compatible = "brcm,nsp-armpll";
> >+			clocks = <&osc>;
> >+			reg = <0x0000 0x1000>;
> >+		};
> >+
> >  		timer@0200 {
> 
> timer@20200. Or is this addressed in another patch? I completely
> lose track of these....

No, you are correct.  The names need to be updated as well with the
new offsets.  New series to follow.

Thanks,
Jon

> 
> >  			compatible = "arm,cortex-a9-global-timer";
> >-			reg = <0x0200 0x100>;
> >+			reg = <0x20200 0x100>;
> >  			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
> >  			clocks = <&periph_clk>;
> >  		};
> >
> >  		twd-timer@0600 {
> 
> twd-timer@20600
> 
> >  			compatible = "arm,cortex-a9-twd-timer";
> >-			reg = <0x0600 0x20>;
> >+			reg = <0x20600 0x20>;
> >  			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
> >  						  IRQ_TYPE_LEVEL_HIGH)>;
> >  			clocks = <&periph_clk>;
> >@@ -75,7 +83,7 @@
> >
> >  		twd-watchdog@0620 {
> 
> same here
> 
> >  			compatible = "arm,cortex-a9-twd-wdt";
> >-			reg = <0x0620 0x20>;
> >+			reg = <0x20620 0x20>;
> >  			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
> >  						  IRQ_TYPE_LEVEL_HIGH)>;
> >  			clocks = <&periph_clk>;
> >@@ -86,13 +94,13 @@
> >  			#interrupt-cells = <3>;
> >  			#address-cells = <0>;
> >  			interrupt-controller;
> >-			reg = <0x1000 0x1000>,
> >-			      <0x0100 0x100>;
> >+			reg = <0x21000 0x1000>,
> >+			      <0x20100 0x100>;
> >  		};
> >
> >  		L2: l2-cache {
> >  			compatible = "arm,pl310-cache";
> >-			reg = <0x2000 0x1000>;
> >+			reg = <0x22000 0x1000>;
> >  			cache-unified;
> >  			cache-level = <2>;
> >  		};
> >@@ -103,10 +111,34 @@
> >  		#size-cells = <1>;
> >  		ranges;
> >
> >-		periph_clk: periph_clk {
> >+		osc: oscillator {
> >+			#clock-cells = <0>;
> >  			compatible = "fixed-clock";
> >+			clock-frequency = <25000000>;
> >+		};
> >+
> >+		iprocmed: iprocmed {
> >+			#clock-cells = <0>;
> >+			compatible = "fixed-factor-clock";
> >+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
> >+			clock-div = <2>;
> >+			clock-mult = <1>;
> >+		};
> >+
> >+		iprocslow: iprocslow {
> >+			#clock-cells = <0>;
> >+			compatible = "fixed-factor-clock";
> >+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
> >+			clock-div = <4>;
> >+			clock-mult = <1>;
> >+		};
> >+
> >+		periph_clk: periph_clk {
> >  			#clock-cells = <0>;
> >-			clock-frequency = <500000000>;
> >+			compatible = "fixed-factor-clock";
> >+			clocks = <&a9pll>;
> >+			clock-div = <2>;
> >+			clock-mult = <1>;
> >  		};
> >  	};
> >
> >@@ -118,17 +150,17 @@
> >
> >  		uart0: serial@0300 {
> >  			compatible = "ns16550a";
> >-			reg = <0x0300 0x100>;
> >+			reg = <0x000300 0x100>;
> >  			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> >-			clock-frequency = <62499840>;
> >+			clocks = <&osc>;
> >  			status = "disabled";
> >  		};
> >
> >  		uart1: serial@0400 {
> >  			compatible = "ns16550a";
> >-			reg = <0x0400 0x100>;
> >+			reg = <0x000400 0x100>;
> >  			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> >-			clock-frequency = <62499840>;
> >+			clocks = <&osc>;
> >  			status = "disabled";
> >  		};
> >
> >@@ -226,5 +258,24 @@
> >  			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
> >  			clock-frequency = <100000>;
> >  		};
> >+
> >+		lcpll0: lcpll0@3f100 {
> >+			#clock-cells = <1>;
> >+			compatible = "brcm,nsp-lcpll0";
> >+			reg = <0x3f100 0x14>;
> >+			clocks = <&osc>;
> >+			clock-output-names = "lcpll0", "pcie_phy", "sdio",
> >+					     "ddr_phy";
> >+		};
> >+
> >+		genpll: genpll@3f140 {
> >+			#clock-cells = <1>;
> >+			compatible = "brcm,nsp-genpll";
> >+			reg = <0x3f140 0x24>;
> >+			clocks = <&osc>;
> >+			clock-output-names = "genpll", "phy", "ethernetclk",
> >+					     "usbclk", "iprocfast", "sata1",
> >+					     "sata2";
> >+		};
> >  	};
> >  };
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web