Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1273689 > unrolled thread

[PATCH 4/4] spi: mediatek: revise mtk_spi_probe() failure flow

Started byLeilk Liu <leilk.liu@mediatek.com>
First post2015-11-20 03:30 +0100
Last post2015-11-25 10:20 +0100
Articles 5 — 3 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH 4/4] spi: mediatek: revise mtk_spi_probe() failure flow Leilk Liu <leilk.liu@mediatek.com> - 2015-11-20 03:30 +0100
    Re: [PATCH 4/4] spi: mediatek: revise mtk_spi_probe() failure flow Mark Brown <broonie@kernel.org> - 2015-11-21 14:50 +0100
      Re: [PATCH 4/4] spi: mediatek: revise mtk_spi_probe() failure flow lei liu <leilk.liu@mediatek.com> - 2015-11-24 03:40 +0100
        Re: [PATCH 4/4] spi: mediatek: revise mtk_spi_probe() failure flow Mark Brown <broonie@kernel.org> - 2015-11-24 14:10 +0100
          Re: [PATCH 4/4] spi: mediatek: revise mtk_spi_probe() failure flow lei liu <leilk.liu@mediatek.com> - 2015-11-25 10:20 +0100

#1273689 — [PATCH 4/4] spi: mediatek: revise mtk_spi_probe() failure flow

FromLeilk Liu <leilk.liu@mediatek.com>
Date2015-11-20 03:30 +0100
Subject[PATCH 4/4] spi: mediatek: revise mtk_spi_probe() failure flow
Message-ID<qwJCx-10e-5@gated-at.bofh.it>
This patch revises failure flow while pm_runtime_enable().

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
---
 drivers/spi/spi-mt65xx.c |   15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 6c1a96e..00a36da 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -607,7 +607,8 @@ static int mtk_spi_probe(struct platform_device *pdev)
 	ret = clk_set_parent(mdata->sel_clk, mdata->parent_clk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to clk_set_parent (%d)\n", ret);
-		goto err_disable_clk;
+		clk_disable_unprepare(mdata->spi_clk);
+		goto err_put_master;
 	}
 
 	clk_disable_unprepare(mdata->spi_clk);
@@ -617,7 +618,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register master (%d)\n", ret);
-		goto err_put_master;
+		goto err_disable_runtime_pm;
 	}
 
 	if (mdata->dev_comp->need_pad_sel) {
@@ -626,14 +627,14 @@ static int mtk_spi_probe(struct platform_device *pdev)
 				"pad_num does not match num_chipselect(%d != %d)\n",
 				mdata->pad_num, master->num_chipselect);
 			ret = -EINVAL;
-			goto err_put_master;
+			goto err_disable_runtime_pm;
 		}
 
 		if (!master->cs_gpios && master->num_chipselect > 1) {
 			dev_err(&pdev->dev,
 				"cs_gpios not specified and num_chipselect > 1\n");
 			ret = -EINVAL;
-			goto err_put_master;
+			goto err_disable_runtime_pm;
 		}
 
 		if (master->cs_gpios) {
@@ -644,7 +645,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
 				if (ret) {
 					dev_err(&pdev->dev,
 						"can't get CS GPIO %i\n", i);
-					goto err_put_master;
+					goto err_disable_runtime_pm;
 				}
 			}
 		}
@@ -652,8 +653,8 @@ static int mtk_spi_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_disable_clk:
-	clk_disable_unprepare(mdata->spi_clk);
+err_disable_runtime_pm:
+	pm_runtime_disable(&pdev->dev);
 err_put_master:
 	spi_master_put(master);
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]


#1274659

FromMark Brown <broonie@kernel.org>
Date2015-11-21 14:50 +0100
Message-ID<qxgIa-5XE-15@gated-at.bofh.it>
In reply to#1273689

[Multipart message — attachments visible in raw view] — view raw

On Fri, Nov 20, 2015 at 10:21:19AM +0800, Leilk Liu wrote:
> This patch revises failure flow while pm_runtime_enable().

Why?  This also doesn't apply against current code, please check and
resend.

> 
> Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
> ---
>  drivers/spi/spi-mt65xx.c |   15 ++++++++-------
>  1 file changed, 8 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
> index 6c1a96e..00a36da 100644
> --- a/drivers/spi/spi-mt65xx.c
> +++ b/drivers/spi/spi-mt65xx.c
> @@ -607,7 +607,8 @@ static int mtk_spi_probe(struct platform_device *pdev)
>  	ret = clk_set_parent(mdata->sel_clk, mdata->parent_clk);
>  	if (ret < 0) {
>  		dev_err(&pdev->dev, "failed to clk_set_parent (%d)\n", ret);
> -		goto err_disable_clk;
> +		clk_disable_unprepare(mdata->spi_clk);
> +		goto err_put_master;
>  	}
>  
>  	clk_disable_unprepare(mdata->spi_clk);
> @@ -617,7 +618,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
>  	ret = devm_spi_register_master(&pdev->dev, master);
>  	if (ret) {
>  		dev_err(&pdev->dev, "failed to register master (%d)\n", ret);
> -		goto err_put_master;
> +		goto err_disable_runtime_pm;
>  	}
>  
>  	if (mdata->dev_comp->need_pad_sel) {
> @@ -626,14 +627,14 @@ static int mtk_spi_probe(struct platform_device *pdev)
>  				"pad_num does not match num_chipselect(%d != %d)\n",
>  				mdata->pad_num, master->num_chipselect);
>  			ret = -EINVAL;
> -			goto err_put_master;
> +			goto err_disable_runtime_pm;
>  		}
>  
>  		if (!master->cs_gpios && master->num_chipselect > 1) {
>  			dev_err(&pdev->dev,
>  				"cs_gpios not specified and num_chipselect > 1\n");
>  			ret = -EINVAL;
> -			goto err_put_master;
> +			goto err_disable_runtime_pm;
>  		}
>  
>  		if (master->cs_gpios) {
> @@ -644,7 +645,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
>  				if (ret) {
>  					dev_err(&pdev->dev,
>  						"can't get CS GPIO %i\n", i);
> -					goto err_put_master;
> +					goto err_disable_runtime_pm;
>  				}
>  			}
>  		}
> @@ -652,8 +653,8 @@ static int mtk_spi_probe(struct platform_device *pdev)
>  
>  	return 0;
>  
> -err_disable_clk:
> -	clk_disable_unprepare(mdata->spi_clk);
> +err_disable_runtime_pm:
> +	pm_runtime_disable(&pdev->dev);
>  err_put_master:
>  	spi_master_put(master);
>  
> -- 
> 1.7.9.5
> 
> 

[toc] | [prev] | [next] | [standalone]


#1276027

Fromlei liu <leilk.liu@mediatek.com>
Date2015-11-24 03:40 +0100
Message-ID<qybGq-1Y4-23@gated-at.bofh.it>
In reply to#1274659
On Sat, 2015-11-21 at 13:39 +0000, Mark Brown wrote:
> On Fri, Nov 20, 2015 at 10:21:19AM +0800, Leilk Liu wrote:
> > This patch revises failure flow while pm_runtime_enable().
> 
> Why?  This also doesn't apply against current code, please check and
> resend.

I don't know. I can git am this patch to spi/for-next. I will resend it,
please help to apply it again, thanks.

> > 
> > Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
> > ---
> >  drivers/spi/spi-mt65xx.c |   15 ++++++++-------
> >  1 file changed, 8 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
> > index 6c1a96e..00a36da 100644
> > --- a/drivers/spi/spi-mt65xx.c
> > +++ b/drivers/spi/spi-mt65xx.c
> > @@ -607,7 +607,8 @@ static int mtk_spi_probe(struct platform_device *pdev)
> >  	ret = clk_set_parent(mdata->sel_clk, mdata->parent_clk);
> >  	if (ret < 0) {
> >  		dev_err(&pdev->dev, "failed to clk_set_parent (%d)\n", ret);
> > -		goto err_disable_clk;
> > +		clk_disable_unprepare(mdata->spi_clk);
> > +		goto err_put_master;
> >  	}
> >  
> >  	clk_disable_unprepare(mdata->spi_clk);
> > @@ -617,7 +618,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
> >  	ret = devm_spi_register_master(&pdev->dev, master);
> >  	if (ret) {
> >  		dev_err(&pdev->dev, "failed to register master (%d)\n", ret);
> > -		goto err_put_master;
> > +		goto err_disable_runtime_pm;
> >  	}
> >  
> >  	if (mdata->dev_comp->need_pad_sel) {
> > @@ -626,14 +627,14 @@ static int mtk_spi_probe(struct platform_device *pdev)
> >  				"pad_num does not match num_chipselect(%d != %d)\n",
> >  				mdata->pad_num, master->num_chipselect);
> >  			ret = -EINVAL;
> > -			goto err_put_master;
> > +			goto err_disable_runtime_pm;
> >  		}
> >  
> >  		if (!master->cs_gpios && master->num_chipselect > 1) {
> >  			dev_err(&pdev->dev,
> >  				"cs_gpios not specified and num_chipselect > 1\n");
> >  			ret = -EINVAL;
> > -			goto err_put_master;
> > +			goto err_disable_runtime_pm;
> >  		}
> >  
> >  		if (master->cs_gpios) {
> > @@ -644,7 +645,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
> >  				if (ret) {
> >  					dev_err(&pdev->dev,
> >  						"can't get CS GPIO %i\n", i);
> > -					goto err_put_master;
> > +					goto err_disable_runtime_pm;
> >  				}
> >  			}
> >  		}
> > @@ -652,8 +653,8 @@ static int mtk_spi_probe(struct platform_device *pdev)
> >  
> >  	return 0;
> >  
> > -err_disable_clk:
> > -	clk_disable_unprepare(mdata->spi_clk);
> > +err_disable_runtime_pm:
> > +	pm_runtime_disable(&pdev->dev);
> >  err_put_master:
> >  	spi_master_put(master);
> >  
> > -- 
> > 1.7.9.5
> > 
> > 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]


#1276416

FromMark Brown <broonie@kernel.org>
Date2015-11-24 14:10 +0100
Message-ID<qylw6-5A-15@gated-at.bofh.it>
In reply to#1276027

[Multipart message — attachments visible in raw view] — view raw

On Tue, Nov 24, 2015 at 10:33:24AM +0800, lei liu wrote:
> On Sat, 2015-11-21 at 13:39 +0000, Mark Brown wrote:
> > On Fri, Nov 20, 2015 at 10:21:19AM +0800, Leilk Liu wrote:

> > > This patch revises failure flow while pm_runtime_enable().

> > Why?  This also doesn't apply against current code, please check and
> > resend.

> I don't know. I can git am this patch to spi/for-next. I will resend it,
> please help to apply it again, thanks.

If you don't know why we should make this change then we may as well
just not make it?

[toc] | [prev] | [next] | [standalone]


#1277126

Fromlei liu <leilk.liu@mediatek.com>
Date2015-11-25 10:20 +0100
Message-ID<qyEp4-4c9-27@gated-at.bofh.it>
In reply to#1276416
On Tue, 2015-11-24 at 13:04 +0000, Mark Brown wrote:
> On Tue, Nov 24, 2015 at 10:33:24AM +0800, lei liu wrote:
> > On Sat, 2015-11-21 at 13:39 +0000, Mark Brown wrote:
> > > On Fri, Nov 20, 2015 at 10:21:19AM +0800, Leilk Liu wrote:
> 
> > > > This patch revises failure flow while pm_runtime_enable().
> 
> > > Why?  This also doesn't apply against current code, please check and
> > > resend.
> 
> > I don't know. I can git am this patch to spi/for-next. I will resend it,
> > please help to apply it again, thanks.
> 
> If you don't know why we should make this change then we may as well
> just not make it?

OK. I will write a proper commit message to explain what this patch
does. Thanks.

> _________________
> ______________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web