Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1263208 > unrolled thread

[PATCH 1/7] doc:bindings:Add document for mfd hi665x PMIC

Started byChen Feng <puck.chen@hisilicon.com>
First post2015-11-05 14:50 +0100
Last post2015-11-05 15:10 +0100
Articles 2 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH 1/7] doc:bindings:Add document for mfd hi665x PMIC Chen Feng <puck.chen@hisilicon.com> - 2015-11-05 14:50 +0100
    Re: [PATCH 1/7] doc:bindings:Add document for mfd hi665x PMIC Mark Brown <broonie@kernel.org> - 2015-11-05 15:10 +0100

#1263208 — [PATCH 1/7] doc:bindings:Add document for mfd hi665x PMIC

FromChen Feng <puck.chen@hisilicon.com>
Date2015-11-05 14:50 +0100
Subject[PATCH 1/7] doc:bindings:Add document for mfd hi665x PMIC
Message-ID<qrt5n-7ln-5@gated-at.bofh.it>
Add document for mfd driver hi655x pmic driver

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
---
 .../devicetree/bindings/mfd/hisilicon,hi655x.txt       | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt

diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
new file mode 100644
index 0000000..afa2fa5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
@@ -0,0 +1,18 @@
+Hisilicon hi655x Power Management Integrated Circuit (PMIC)
+
+Required properties:
+- compatible: Should be "hisilicon,hi655x-pmic-driver"
+- reg: Base address of PMIC on hi6220 soc
+- #interrupt-cells: Should be 2, two cells are needed for irq.
+- interrupt-controller: hi655x has internal IRQs (has own IRQ domain).
+- pmu_irq_gpio: should be &gpio_pmu_irq_n, is the IRQ gpio of hi655x.
+
+Example:
+	pmic: pmic@f8000000 {
+		compatible = "hisilicon,hi655x-pmic-driver";
+		reg = <0x0 0xf8000000 0x0 0x1000>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		pmic_gpios = <&gpio_pmu_irq_n>;
+		status = "okay";
+	}
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]


#1263232

FromMark Brown <broonie@kernel.org>
Date2015-11-05 15:10 +0100
Message-ID<qrtoK-7I5-17@gated-at.bofh.it>
In reply to#1263208

[Multipart message — attachments visible in raw view] — view raw

On Thu, Nov 05, 2015 at 09:34:42PM +0800, Chen Feng wrote:

Please use subject lines matching the style for the subsystem.  This
makes it easier for people to identify relevant patches.

> +- #interrupt-cells: Should be 2, two cells are needed for irq.
> +- interrupt-controller: hi655x has internal IRQs (has own IRQ domain).
> +- pmu_irq_gpio: should be &gpio_pmu_irq_n, is the IRQ gpio of hi655x.

I'm not entirely sure what this is but it sounds worrying - why can you
not just use a normal interrupt specifier?  It also doesn't correspond
to the example:

> +Example:
> +	pmic: pmic@f8000000 {
> +		compatible = "hisilicon,hi655x-pmic-driver";
> +		reg = <0x0 0xf8000000 0x0 0x1000>;
> +		#interrupt-cells = <2>;
> +		interrupt-controller;
> +		pmic_gpios = <&gpio_pmu_irq_n>;
> +		status = "okay";
> +	}
> -- 
> 1.9.1
> 
> 

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web