Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1246941 > unrolled thread

[PATCH v3 0/3] hwrng: stm32 - add support for STM32 HW RNG

Started byDaniel Thompson <daniel.thompson@linaro.org>
First post2015-10-14 18:00 +0200
Last post2015-10-14 18:00 +0200
Articles 4 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH v3 0/3] hwrng: stm32 - add support for STM32 HW RNG Daniel Thompson <daniel.thompson@linaro.org> - 2015-10-14 18:00 +0200
    [PATCH v3 3/3] ARM: dts: stm32f429: Adopt STM32 RNG driver Daniel Thompson <daniel.thompson@linaro.org> - 2015-10-14 18:00 +0200
    [PATCH v3 1/3] dt-bindings: Document the STM32 HW RNG bindings Daniel Thompson <daniel.thompson@linaro.org> - 2015-10-14 18:00 +0200
    [PATCH v3 2/3] hwrng: stm32 - add support for STM32 HW RNG Daniel Thompson <daniel.thompson@linaro.org> - 2015-10-14 18:00 +0200

#1246941 — [PATCH v3 0/3] hwrng: stm32 - add support for STM32 HW RNG

FromDaniel Thompson <daniel.thompson@linaro.org>
Date2015-10-14 18:00 +0200
Subject[PATCH v3 0/3] hwrng: stm32 - add support for STM32 HW RNG
Message-ID<qjwD8-39a-23@gated-at.bofh.it>
This patchset introduces a driver for the STM32 hardware random number
generator.

Herbert: I have assumed the v2 version is *so* badly broken (sorry
         again for that) that you would probably choose to remove v2
	 completely and replace it with v3. In a moment I will also
	 post a patch to fix the build without ripping out v2. Choose
	 whichever suits you best.

v3:

 * Fixed build with CONFIG_PM (Fengguang Wu). Runtime tested as normal
   and also build tested on stm32 (which has CONFIG_PM set) and on
   x86/COMPILE_TEST with and without CONFIG_PM.

v2:

 * Moved binding docs from .../hwrng/ to .../rng/ and renamed to match
   convention in new directory (Rob Herring).
 * Adopted runtime PM and auto-suspend instead of managing the clocks
   from the read function (Linus Walleij). Increased bandwidth by ~30%.
 * Simplified error detection in main read loop (Linus Walleij, Maxime
   Coquelin).
 * Only WARN_ONCE() when hardware failure mechanisms trigger (Maxime
   Coquelin).
 * Simplify end of probe function after cocci warning (Fengguang Wu).
 * Switch to devm_hwrng_register.


Daniel Thompson (3):
  dt-bindings: Document the STM32 HW RNG bindings
  hwrng: stm32 - add support for STM32 HW RNG
  ARM: dts: stm32f429: Adopt STM32 RNG driver

 .../devicetree/bindings/rng/st,stm32-rng.txt       |  21 +++
 arch/arm/boot/dts/stm32f429.dtsi                   |   7 +
 drivers/char/hw_random/Kconfig                     |  12 ++
 drivers/char/hw_random/Makefile                    |   1 +
 drivers/char/hw_random/stm32-rng.c                 | 202 +++++++++++++++++++++
 5 files changed, 243 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rng/st,stm32-rng.txt
 create mode 100644 drivers/char/hw_random/stm32-rng.c

--
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]


#1246943 — [PATCH v3 3/3] ARM: dts: stm32f429: Adopt STM32 RNG driver

FromDaniel Thompson <daniel.thompson@linaro.org>
Date2015-10-14 18:00 +0200
Subject[PATCH v3 3/3] ARM: dts: stm32f429: Adopt STM32 RNG driver
Message-ID<qjwD9-39a-27@gated-at.bofh.it>
In reply to#1246941
New bindings and driver have been created for STM32 series parts. This
patch integrates this changes.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index cb0613090243..90081fc22c6c 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -175,6 +175,13 @@
 			reg = <0x40023800 0x400>;
 			clocks = <&clk_hse>;
 		};
+
+		rng: rng@50060800 {
+			compatible = "st,stm32-rng";
+			reg = <0x50060800 0x400>;
+			interrupts = <80>;
+			clocks = <&rcc 0 38>;
+		};
 	};
 };
 
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]


#1246945 — [PATCH v3 1/3] dt-bindings: Document the STM32 HW RNG bindings

FromDaniel Thompson <daniel.thompson@linaro.org>
Date2015-10-14 18:00 +0200
Subject[PATCH v3 1/3] dt-bindings: Document the STM32 HW RNG bindings
Message-ID<qjwD9-39a-31@gated-at.bofh.it>
In reply to#1246941
This adds documentation of device tree bindings for the STM32 hardware
random number generator.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/rng/st,stm32-rng.txt        | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rng/st,stm32-rng.txt

diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.txt b/Documentation/devicetree/bindings/rng/st,stm32-rng.txt
new file mode 100644
index 000000000000..47f04176f93b
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.txt
@@ -0,0 +1,21 @@
+STMicroelectronics STM32 HW RNG
+===============================
+
+The STM32 hardware random number generator is a simple fixed purpose IP and
+is fully separated from other crypto functions.
+
+Required properties:
+
+- compatible : Should be "st,stm32-rng"
+- reg : Should be register base and length as documented in the datasheet
+- interrupts : The designated IRQ line for the RNG
+- clocks : The clock needed to enable the RNG
+
+Example:
+
+	rng: rng@50060800 {
+		compatible = "st,stm32-rng";
+		reg = <0x50060800 0x400>;
+		interrupts = <80>;
+		clocks = <&rcc 0 38>;
+	};
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]


#1246947 — [PATCH v3 2/3] hwrng: stm32 - add support for STM32 HW RNG

FromDaniel Thompson <daniel.thompson@linaro.org>
Date2015-10-14 18:00 +0200
Subject[PATCH v3 2/3] hwrng: stm32 - add support for STM32 HW RNG
Message-ID<qjwD9-39a-35@gated-at.bofh.it>
In reply to#1246941
Add support for STMicroelectronics STM32 random number generator.

The config value defaults to N, reflecting the fact that STM32 is a
very low resource microcontroller platform and unlikely to be targeted
by any "grown up" defconfigs.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/char/hw_random/Kconfig     |  12 +++
 drivers/char/hw_random/Makefile    |   1 +
 drivers/char/hw_random/stm32-rng.c | 202 +++++++++++++++++++++++++++++++++++++
 3 files changed, 215 insertions(+)
 create mode 100644 drivers/char/hw_random/stm32-rng.c

diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index f48cf11c655e..7930cc9b719c 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -359,6 +359,18 @@ config HW_RANDOM_XGENE
 
 	  If unsure, say Y.
 
+config HW_RANDOM_STM32
+	tristate "STMicroelectronics STM32 random number generator"
+	depends on HW_RANDOM && (ARCH_STM32 || COMPILE_TEST)
+	help
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on STM32 microcontrollers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stm32-rng.
+
+	  If unsure, say N.
+
 endif # HW_RANDOM
 
 config UML_RANDOM
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index 055bb01510ad..8b49c0f7abb1 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -31,3 +31,4 @@ obj-$(CONFIG_HW_RANDOM_BCM2835) += bcm2835-rng.o
 obj-$(CONFIG_HW_RANDOM_IPROC_RNG200) += iproc-rng200.o
 obj-$(CONFIG_HW_RANDOM_MSM) += msm-rng.o
 obj-$(CONFIG_HW_RANDOM_XGENE) += xgene-rng.o
+obj-$(CONFIG_HW_RANDOM_STM32) += stm32-rng.o
diff --git a/drivers/char/hw_random/stm32-rng.c b/drivers/char/hw_random/stm32-rng.c
new file mode 100644
index 000000000000..92a810648bd0
--- /dev/null
+++ b/drivers/char/hw_random/stm32-rng.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (c) 2015, Daniel Thompson
+ *
+ * This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+
+#define RNG_CR 0x00
+#define RNG_CR_RNGEN BIT(2)
+
+#define RNG_SR 0x04
+#define RNG_SR_SEIS BIT(6)
+#define RNG_SR_CEIS BIT(5)
+#define RNG_SR_DRDY BIT(0)
+
+#define RNG_DR 0x08
+
+/*
+ * It takes 40 cycles @ 48MHz to generate each random number (e.g. <1us).
+ * At the time of writing STM32 parts max out at ~200MHz meaning a timeout
+ * of 500 leaves us a very comfortable margin for error. The loop to which
+ * the timeout applies takes at least 4 instructions per iteration so the
+ * timeout is enough to take us up to multi-GHz parts!
+ */
+#define RNG_TIMEOUT 500
+
+struct stm32_rng_private {
+	struct hwrng rng;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static int stm32_rng_read(struct hwrng *rng, void *data, size_t max, bool wait)
+{
+	struct stm32_rng_private *priv =
+	    container_of(rng, struct stm32_rng_private, rng);
+	u32 sr;
+	int retval = 0;
+
+	pm_runtime_get_sync((struct device *) priv->rng.priv);
+
+	while (max > sizeof(u32)) {
+		sr = readl_relaxed(priv->base + RNG_SR);
+		if (!sr && wait) {
+			unsigned int timeout = RNG_TIMEOUT;
+
+			do {
+				cpu_relax();
+				sr = readl_relaxed(priv->base + RNG_SR);
+			} while (!sr && --timeout);
+		}
+
+		/* If error detected or data not ready... */
+		if (sr != RNG_SR_DRDY)
+			break;
+
+		*(u32 *)data = readl_relaxed(priv->base + RNG_DR);
+
+		retval += sizeof(u32);
+		data += sizeof(u32);
+		max -= sizeof(u32);
+	}
+
+	if (WARN_ONCE(sr & (RNG_SR_SEIS | RNG_SR_CEIS),
+		      "bad RNG status - %x\n", sr))
+		writel_relaxed(0, priv->base + RNG_SR);
+
+	pm_runtime_mark_last_busy((struct device *) priv->rng.priv);
+	pm_runtime_put_sync_autosuspend((struct device *) priv->rng.priv);
+
+	return retval || !wait ? retval : -EIO;
+}
+
+static int stm32_rng_init(struct hwrng *rng)
+{
+	struct stm32_rng_private *priv =
+	    container_of(rng, struct stm32_rng_private, rng);
+	int err;
+
+	err = clk_prepare_enable(priv->clk);
+	if (err)
+		return err;
+
+	writel_relaxed(RNG_CR_RNGEN, priv->base + RNG_CR);
+
+	/* clear error indicators */
+	writel_relaxed(0, priv->base + RNG_SR);
+
+	return 0;
+}
+
+static void stm32_rng_cleanup(struct hwrng *rng)
+{
+	struct stm32_rng_private *priv =
+	    container_of(rng, struct stm32_rng_private, rng);
+
+	writel_relaxed(0, priv->base + RNG_CR);
+	clk_disable_unprepare(priv->clk);
+}
+
+static int stm32_rng_probe(struct platform_device *ofdev)
+{
+	struct device *dev = &ofdev->dev;
+	struct device_node *np = ofdev->dev.of_node;
+	struct stm32_rng_private *priv;
+	struct resource res;
+	int err;
+
+	priv = devm_kzalloc(dev, sizeof(struct stm32_rng_private), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	err = of_address_to_resource(np, 0, &res);
+	if (err)
+		return err;
+
+	priv->base = devm_ioremap_resource(dev, &res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->clk = devm_clk_get(&ofdev->dev, NULL);
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	dev_set_drvdata(dev, priv);
+
+	priv->rng.name = dev_driver_string(dev),
+#ifndef CONFIG_PM
+	priv->rng.init = stm32_rng_init,
+	priv->rng.cleanup = stm32_rng_cleanup,
+#endif
+	priv->rng.read = stm32_rng_read,
+	priv->rng.priv = (unsigned long) dev;
+
+	pm_runtime_set_autosuspend_delay(dev, 100);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_enable(dev);
+
+	return devm_hwrng_register(dev, &priv->rng);
+}
+
+#ifdef CONFIG_PM
+static int stm32_rng_runtime_suspend(struct device *dev)
+{
+	struct stm32_rng_private *priv = dev_get_drvdata(dev);
+
+	stm32_rng_cleanup(&priv->rng);
+
+	return 0;
+}
+
+static int stm32_rng_runtime_resume(struct device *dev)
+{
+	struct stm32_rng_private *priv = dev_get_drvdata(dev);
+
+	return stm32_rng_init(&priv->rng);
+}
+#endif
+
+static UNIVERSAL_DEV_PM_OPS(stm32_rng_pm_ops, stm32_rng_runtime_suspend,
+			    stm32_rng_runtime_resume, NULL);
+
+static const struct of_device_id stm32_rng_match[] = {
+	{
+		.compatible = "st,stm32-rng",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, stm32_rng_match);
+
+static struct platform_driver stm32_rng_driver = {
+	.driver = {
+		.name = "stm32-rng",
+		.pm = &stm32_rng_pm_ops,
+		.of_match_table = stm32_rng_match,
+	},
+	.probe = stm32_rng_probe,
+};
+
+module_platform_driver(stm32_rng_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Daniel Thompson <daniel.thompson@linaro.org>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 RNG device driver");
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web