Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1242993 > unrolled thread

Re: [PATCH v7] clk: bcm2835: Add support for programming the audio domain clocks

Started byStephen Warren <swarren@wwwdotorg.org>
First post2015-10-09 04:10 +0200
Last post2015-10-09 04:10 +0200
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  Re: [PATCH v7] clk: bcm2835: Add support for programming the audio  domain clocks Stephen Warren <swarren@wwwdotorg.org> - 2015-10-09 04:10 +0200

#1242993 — Re: [PATCH v7] clk: bcm2835: Add support for programming the audio domain clocks

FromStephen Warren <swarren@wwwdotorg.org>
Date2015-10-09 04:10 +0200
SubjectRe: [PATCH v7] clk: bcm2835: Add support for programming the audio domain clocks
Message-ID<qhvi9-4YJ-1@gated-at.bofh.it>
On 10/08/2015 07:37 PM, Eric Anholt wrote:
> This adds support for enabling, disabling, and setting the rate of the
> audio domain clocks.  It will be necessary for setting the pixel clock
> for HDMI in the VC4 driver and let us write a cpufreq driver.  It will
> also improve compatibility with user changes to the firmware's
> config.txt, since our previous fixed clocks are unaware of it.
> 
> The firmware also has support for configuring the clocks through the
> mailbox channel, but the pixel clock setup by the firmware doesn't
> work, and it's Raspberry Pi specific anyway.  The only conflicts we
> should have with the firmware would be if we made firmware calls that
> result in clock management (like opening firmware V3D or ISP access,
> which we don't support in upstream), or on hardware over-thermal or
> under-voltage (when the firmware would rewrite PLLB to take the ARM
> out of overclock).  If that happens, our cached .recalc_rate() results
> would be incorrect, but that's no worse than our current state where
> we used fixed clocks.
> 
> The existing fixed clocks in the code are left in place to provide
> backwards compatibility with old device tree files.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web