Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1234521 > unrolled thread
| Started by | Petr Cvek <petr.cvek@tul.cz> |
|---|---|
| First post | 2015-09-28 23:40 +0200 |
| Last post | 2015-10-03 14:50 +0200 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH v4 18/26] ARM: pxa: magician: Add support for ADS7846 Petr Cvek <petr.cvek@tul.cz> - 2015-09-28 23:40 +0200
Re: [PATCH v4 18/26] ARM: pxa: magician: Add support for ADS7846 Philipp Zabel <philipp.zabel@gmail.com> - 2015-10-03 14:50 +0200
| From | Petr Cvek <petr.cvek@tul.cz> |
|---|---|
| Date | 2015-09-28 23:40 +0200 |
| Subject | [PATCH v4 18/26] ARM: pxa: magician: Add support for ADS7846 |
| Message-ID | <qdOjn-3fZ-9@gated-at.bofh.it> |
Add support for an ADS7846 touchscreen.
Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
---
arch/arm/mach-pxa/magician.c | 86 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index af8133a..450f35f 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -28,6 +28,7 @@
#include <linux/pwm_backlight.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/gpio-regulator.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/i2c/pxa-i2c.h>
@@ -44,6 +45,10 @@
#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/spi/ads7846.h>
+
#include "devices.h"
#include "generic.h"
@@ -748,6 +753,37 @@ static struct platform_device bq24022 = {
};
/*
+ * fixed regulator for ads7846
+ */
+
+static struct regulator_consumer_supply ads7846_supply =
+ REGULATOR_SUPPLY("vcc", "spi2.0");
+
+static struct regulator_init_data vads7846_regulator = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &ads7846_supply,
+};
+
+static struct fixed_voltage_config vads7846 = {
+ .supply_name = "vads7846",
+ .microvolts = 3300000, /* probably */
+ .gpio = -EINVAL,
+ .startup_delay = 0,
+ .init_data = &vads7846_regulator,
+};
+
+static struct platform_device vads7846_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &vads7846,
+ },
+};
+
+/*
* MMC/SD
*/
@@ -879,6 +915,51 @@ static struct i2c_pxa_platform_data magician_i2c_power_info = {
};
/*
+ * Touchscreen
+ */
+
+static struct ads7846_platform_data ads7846_pdata = {
+ .model = 7846,
+ .x_min = 0,
+ .y_min = 0,
+ .x_max = 4096,
+ .y_max = 4096,
+ .x_plate_ohms = 180, /* for pressure in 0-255 */
+ .y_plate_ohms = 180,
+ .pressure_max = 255, /* up to 12bit sampling */
+ .debounce_max = 10,
+ .debounce_tol = 3,
+ .debounce_rep = 1,
+ .gpio_pendown = GPIO115_MAGICIAN_nPEN_IRQ,
+ .keep_vref_on = 1, /* FIXME, external Vref? */
+ .vref_delay_usecs = 100,
+ /* .wait_for_sync, GPIO77_LCD_BIAS low noise measure, latency! */
+};
+
+struct pxa2xx_spi_chip tsc2046_chip_info = {
+ .tx_threshold = 1,
+ .rx_threshold = 2,
+ .timeout = 64,
+ .gpio_cs = -1,
+};
+
+static struct pxa2xx_spi_master magician_spi_info = {
+ .num_chipselect = 1,
+ .enable_dma = 1,
+};
+
+static struct spi_board_info ads7846_spi_board_info[] __initdata = {
+ {
+ .modalias = "ads7846",
+ .bus_num = 2,
+ .max_speed_hz = 1857143,
+ .platform_data = &ads7846_pdata,
+ .controller_data = &tsc2046_chip_info,
+ .irq = PXA_GPIO_TO_IRQ(GPIO115_MAGICIAN_nPEN_IRQ),
+ },
+};
+
+/*
* Platform devices
*/
@@ -887,6 +968,7 @@ static struct platform_device *devices[] __initdata = {
&egpio,
&backlight,
&pasic3,
+ &vads7846_device,
&bq24022,
&gpio_vbus,
&power_supply,
@@ -944,6 +1026,10 @@ static void __init magician_init(void)
lcd_select ? &samsung_info : &toppoly_info);
} else
pr_err("LCD detection: CPLD mapping failed\n");
+
+ pxa2xx_set_spi_info(2, &magician_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(ads7846_spi_board_info));
+
}
MACHINE_START(MAGICIAN, "HTC Magician")
--
1.7.12.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [next] | [standalone]
| From | Philipp Zabel <philipp.zabel@gmail.com> |
|---|---|
| Date | 2015-10-03 14:50 +0200 |
| Message-ID | <qfuqd-251-3@gated-at.bofh.it> |
| In reply to | #1234521 |
Am Montag, den 28.09.2015, 23:38 +0200 schrieb Petr Cvek:
> Add support for an ADS7846 touchscreen.
It's actually a TSC2045.
> Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
> ---
> arch/arm/mach-pxa/magician.c | 86
> ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 86 insertions(+)
>
> diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach
> -pxa/magician.c
> index af8133a..450f35f 100644
> --- a/arch/arm/mach-pxa/magician.c
> +++ b/arch/arm/mach-pxa/magician.c
> @@ -28,6 +28,7 @@
> #include <linux/pwm_backlight.h>
> #include <linux/regulator/driver.h>
> #include <linux/regulator/gpio-regulator.h>
> +#include <linux/regulator/fixed.h>
> #include <linux/regulator/machine.h>
> #include <linux/usb/gpio_vbus.h>
> #include <linux/i2c/pxa-i2c.h>
> @@ -44,6 +45,10 @@
> #include <linux/platform_data/irda-pxaficp.h>
> #include <linux/platform_data/usb-ohci-pxa27x.h>
>
> +#include <linux/spi/spi.h>
> +#include <linux/spi/pxa2xx_spi.h>
> +#include <linux/spi/ads7846.h>
> +
> #include "devices.h"
> #include "generic.h"
>
> @@ -748,6 +753,37 @@ static struct platform_device bq24022 = {
> };
>
> /*
> + * fixed regulator for ads7846
> + */
> +
> +static struct regulator_consumer_supply ads7846_supply =
> + REGULATOR_SUPPLY("vcc", "spi2.0");
> +
> +static struct regulator_init_data vads7846_regulator = {
> + .constraints = {
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = 1,
> + .consumer_supplies = &ads7846_supply,
> +};
> +
> +static struct fixed_voltage_config vads7846 = {
> + .supply_name = "vads7846",
> + .microvolts = 3300000, /* probably */
I agree.
> + .gpio = -EINVAL,
> + .startup_delay = 0,
> + .init_data = &vads7846_regulator,
> +};
> +
> +static struct platform_device vads7846_device = {
> + .name = "reg-fixed-voltage",
> + .id = 1,
> + .dev = {
> + .platform_data = &vads7846,
> + },
> +};
> +
> +/*
> * MMC/SD
> */
>
> @@ -879,6 +915,51 @@ static struct i2c_pxa_platform_data
> magician_i2c_power_info = {
> };
>
> /*
> + * Touchscreen
> + */
> +
> +static struct ads7846_platform_data ads7846_pdata = {
> + .model = 7846,
> + .x_min = 0,
> + .y_min = 0,
> + .x_max = 4096,
> + .y_max = 4096,
> + .x_plate_ohms = 180, /* for pressure
> in 0-255 */
> + .y_plate_ohms = 180,
> + .pressure_max = 255, /* up to 12bit
> sampling */
> + .debounce_max = 10,
> + .debounce_tol = 3,
> + .debounce_rep = 1,
> + .gpio_pendown = GPIO115_MAGICIAN_nPEN_IRQ,
> + .keep_vref_on = 1, /* FIXME, external
> Vref? */
> + .vref_delay_usecs = 100,
> + /* .wait_for_sync, GPIO77_LCD_BIAS low noise measure,
> latency! */
> +};
> +
> +struct pxa2xx_spi_chip tsc2046_chip_info = {
> + .tx_threshold = 1,
> + .rx_threshold = 2,
> + .timeout = 64,
> + .gpio_cs = -1,
> +};
> +
> +static struct pxa2xx_spi_master magician_spi_info = {
> + .num_chipselect = 1,
> + .enable_dma = 1,
> +};
> +
> +static struct spi_board_info ads7846_spi_board_info[] __initdata = {
> + {
> + .modalias = "ads7846",
> + .bus_num = 2,
> + .max_speed_hz = 1857143,
I had used 2.6 MHz here.
> + .platform_data = &ads7846_pdata,
> + .controller_data = &tsc2046_chip_info,
> + .irq = PXA_GPIO_TO_IRQ(GPIO115_MAGICIAN_nPEN_IRQ),
> + },
> +};
> +
> +/*
> * Platform devices
> */
>
> @@ -887,6 +968,7 @@ static struct platform_device *devices[]
> __initdata = {
> &egpio,
> &backlight,
> &pasic3,
> + &vads7846_device,
> &bq24022,
> &gpio_vbus,
> &power_supply,
> @@ -944,6 +1026,10 @@ static void __init magician_init(void)
> lcd_select ? &samsung_info : &toppoly_info);
> } else
> pr_err("LCD detection: CPLD mapping failed\n");
> +
> + pxa2xx_set_spi_info(2, &magician_spi_info);
> + spi_register_board_info(ARRAY_AND_SIZE(ads7846_spi_board_inf
> o));
> +
> }
>
> MACHINE_START(MAGICIAN, "HTC Magician")
regards
Philipp
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web