Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1238478 > unrolled thread

[PATCH 2/5] mtd: nand: Allow MTD_NAND_BRCMNAND to be selected for ARM64

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 2/5] mtd: nand: Allow MTD_NAND_BRCMNAND to be selected for ARM64 Anup Patel <anup.patel@broadcom.com> - 2015-10-02 20:00 +0200

#1238478 — [PATCH 2/5] mtd: nand: Allow MTD_NAND_BRCMNAND to be selected for ARM64

The BRCM NAND driver can be re-used for Broadcom ARM64 SoCs hence
this patch updates Kconfig to allow selection of MTD_NAND_BRCMNAND
for ARM64.

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Pramod KUMAR <pramodku@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
 drivers/mtd/nand/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 3324281..a1b5819 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -393,7 +393,7 @@ config MTD_NAND_GPMI_NAND
 
 config MTD_NAND_BRCMNAND
 	tristate "Broadcom STB NAND controller"
-	depends on ARM || MIPS
+	depends on ARM || ARM64 || MIPS
 	help
 	  Enables the Broadcom NAND controller driver. The controller was
 	  originally designed for Set-Top Box but is used on various BCM7xxx,
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web