Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1237519 > unrolled thread
| Started by | Chen-Yu Tsai <wens@csie.org> |
|---|---|
| First post | 2015-10-01 17:40 +0200 |
| Last post | 2015-10-02 07:30 +0200 |
| Articles | 4 — 2 participants |
Back to article view | Back to linux.kernel
[PATCH 0/2] irqchip: sunxi-nmi: misc. / aesthetic improvements Chen-Yu Tsai <wens@csie.org> - 2015-10-01 17:40 +0200
[PATCH 1/2] irqchip: sunxi-nmi: Use driver name instead of DT node name for identification Chen-Yu Tsai <wens@csie.org> - 2015-10-01 17:40 +0200
Re: [PATCH 1/2] irqchip: sunxi-nmi: Use driver name instead of DT node name for identification Maxime Ripard <maxime.ripard@free-electrons.com> - 2015-10-01 22:50 +0200
Re: [PATCH 1/2] irqchip: sunxi-nmi: Use driver name instead of DT node name for identification Chen-Yu Tsai <wens@csie.org> - 2015-10-02 07:30 +0200
| From | Chen-Yu Tsai <wens@csie.org> |
|---|---|
| Date | 2015-10-01 17:40 +0200 |
| Subject | [PATCH 0/2] irqchip: sunxi-nmi: misc. / aesthetic improvements |
| Message-ID | <qeO7D-hB-19@gated-at.bofh.it> |
Hi everyone,
sunxi-nmi uses its DT node name, which is normally "interrupt-controller",
as its irqchip name. This only serves to confuse the user when one sees
"interrupt-controller" in /sys/kernel/debug/irq_domain_mapping or
/proc/interrupts. We want it to show something more specific, like
"sunxi-nmi". Also do this for the printk calls.
While at it, also switch to the new of_io_request_and_map() call, so the
IO resource is properly held, and also shows up in /proc/iomem.
Regards
ChenYu
P.S. I'm thinking about removing the "_irq_chip" suffix from the axp20x
irq chip name as well.
Chen-Yu Tsai (2):
irqchip: sunxi-nmi: Use driver name instead of DT node name for
identification
irqchip: sunxi-nmi: switch to of_io_request_and_map() from of_iomap()
drivers/irqchip/irq-sunxi-nmi.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
--
2.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [next] | [standalone]
| From | Chen-Yu Tsai <wens@csie.org> |
|---|---|
| Date | 2015-10-01 17:40 +0200 |
| Subject | [PATCH 1/2] irqchip: sunxi-nmi: Use driver name instead of DT node name for identification |
| Message-ID | <qeO7E-hB-31@gated-at.bofh.it> |
| In reply to | #1237519 |
The device tree node name is typically "interrupt-controller", which is
rather useless when used in printk messages and irq chip names for
identification purposes. Use the driver name "sunxi-nmi" instead.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
drivers/irqchip/irq-sunxi-nmi.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/irqchip/irq-sunxi-nmi.c b/drivers/irqchip/irq-sunxi-nmi.c
index c143dd58410c..57e009917d2d 100644
--- a/drivers/irqchip/irq-sunxi-nmi.c
+++ b/drivers/irqchip/irq-sunxi-nmi.c
@@ -21,6 +21,7 @@
#include <linux/irqchip/chained_irq.h>
#define SUNXI_NMI_SRC_TYPE_MASK 0x00000003
+#define DRV_NAME "sunxi-nmi"
enum {
SUNXI_SRC_TYPE_LEVEL_LOW = 0,
@@ -130,22 +131,22 @@ static int __init sunxi_sc_nmi_irq_init(struct device_node *node,
domain = irq_domain_add_linear(node, 1, &irq_generic_chip_ops, NULL);
if (!domain) {
- pr_err("%s: Could not register interrupt domain.\n", node->name);
+ pr_err("%s: Could not register interrupt domain.\n", DRV_NAME);
return -ENOMEM;
}
- ret = irq_alloc_domain_generic_chips(domain, 1, 2, node->name,
+ ret = irq_alloc_domain_generic_chips(domain, 1, 2, DRV_NAME,
handle_fasteoi_irq, clr, 0,
IRQ_GC_INIT_MASK_CACHE);
if (ret) {
pr_err("%s: Could not allocate generic interrupt chip.\n",
- node->name);
+ DRV_NAME);
goto fail_irqd_remove;
}
irq = irq_of_parse_and_map(node, 0);
if (irq <= 0) {
- pr_err("%s: unable to parse irq\n", node->name);
+ pr_err("%s: unable to parse irq\n", DRV_NAME);
ret = -EINVAL;
goto fail_irqd_remove;
}
@@ -153,7 +154,7 @@ static int __init sunxi_sc_nmi_irq_init(struct device_node *node,
gc = irq_get_domain_generic_chip(domain, 0);
gc->reg_base = of_iomap(node, 0);
if (!gc->reg_base) {
- pr_err("%s: unable to map resource\n", node->name);
+ pr_err("%s: unable to map resource\n", DRV_NAME);
ret = -ENOMEM;
goto fail_irqd_remove;
}
--
2.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [next] | [standalone]
| From | Maxime Ripard <maxime.ripard@free-electrons.com> |
|---|---|
| Date | 2015-10-01 22:50 +0200 |
| Subject | Re: [PATCH 1/2] irqchip: sunxi-nmi: Use driver name instead of DT node name for identification |
| Message-ID | <qeSXD-7fI-13@gated-at.bofh.it> |
| In reply to | #1237523 |
[Multipart message — attachments visible in raw view] — view raw
Hi,
On Thu, Oct 01, 2015 at 11:33:48PM +0800, Chen-Yu Tsai wrote:
> The device tree node name is typically "interrupt-controller", which is
> rather useless when used in printk messages and irq chip names for
> identification purposes. Use the driver name "sunxi-nmi" instead.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
> drivers/irqchip/irq-sunxi-nmi.c | 11 ++++++-----
> 1 file changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/irqchip/irq-sunxi-nmi.c b/drivers/irqchip/irq-sunxi-nmi.c
> index c143dd58410c..57e009917d2d 100644
> --- a/drivers/irqchip/irq-sunxi-nmi.c
> +++ b/drivers/irqchip/irq-sunxi-nmi.c
> @@ -21,6 +21,7 @@
> #include <linux/irqchip/chained_irq.h>
>
> #define SUNXI_NMI_SRC_TYPE_MASK 0x00000003
> +#define DRV_NAME "sunxi-nmi"
>
> enum {
> SUNXI_SRC_TYPE_LEVEL_LOW = 0,
> @@ -130,22 +131,22 @@ static int __init sunxi_sc_nmi_irq_init(struct device_node *node,
>
> domain = irq_domain_add_linear(node, 1, &irq_generic_chip_ops, NULL);
> if (!domain) {
> - pr_err("%s: Could not register interrupt domain.\n", node->name);
> + pr_err("%s: Could not register interrupt domain.\n", DRV_NAME);
> return -ENOMEM;
> }
>
> - ret = irq_alloc_domain_generic_chips(domain, 1, 2, node->name,
> + ret = irq_alloc_domain_generic_chips(domain, 1, 2, DRV_NAME,
> handle_fasteoi_irq, clr, 0,
> IRQ_GC_INIT_MASK_CACHE);
> if (ret) {
> pr_err("%s: Could not allocate generic interrupt chip.\n",
> - node->name);
> + DRV_NAME);
> goto fail_irqd_remove;
> }
>
> irq = irq_of_parse_and_map(node, 0);
> if (irq <= 0) {
> - pr_err("%s: unable to parse irq\n", node->name);
> + pr_err("%s: unable to parse irq\n", DRV_NAME);
> ret = -EINVAL;
> goto fail_irqd_remove;
> }
> @@ -153,7 +154,7 @@ static int __init sunxi_sc_nmi_irq_init(struct device_node *node,
> gc = irq_get_domain_generic_chip(domain, 0);
> gc->reg_base = of_iomap(node, 0);
> if (!gc->reg_base) {
> - pr_err("%s: unable to map resource\n", node->name);
> + pr_err("%s: unable to map resource\n", DRV_NAME);
All the pr_err changes can even be replaced by defining pr_fmt.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
[toc] | [prev] | [next] | [standalone]
| From | Chen-Yu Tsai <wens@csie.org> |
|---|---|
| Date | 2015-10-02 07:30 +0200 |
| Subject | Re: [PATCH 1/2] irqchip: sunxi-nmi: Use driver name instead of DT node name for identification |
| Message-ID | <qf14S-2jW-25@gated-at.bofh.it> |
| In reply to | #1237720 |
On Fri, Oct 2, 2015 at 4:14 AM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> Hi,
>
> On Thu, Oct 01, 2015 at 11:33:48PM +0800, Chen-Yu Tsai wrote:
>> The device tree node name is typically "interrupt-controller", which is
>> rather useless when used in printk messages and irq chip names for
>> identification purposes. Use the driver name "sunxi-nmi" instead.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>> drivers/irqchip/irq-sunxi-nmi.c | 11 ++++++-----
>> 1 file changed, 6 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/irqchip/irq-sunxi-nmi.c b/drivers/irqchip/irq-sunxi-nmi.c
>> index c143dd58410c..57e009917d2d 100644
>> --- a/drivers/irqchip/irq-sunxi-nmi.c
>> +++ b/drivers/irqchip/irq-sunxi-nmi.c
>> @@ -21,6 +21,7 @@
>> #include <linux/irqchip/chained_irq.h>
>>
>> #define SUNXI_NMI_SRC_TYPE_MASK 0x00000003
>> +#define DRV_NAME "sunxi-nmi"
>>
>> enum {
>> SUNXI_SRC_TYPE_LEVEL_LOW = 0,
>> @@ -130,22 +131,22 @@ static int __init sunxi_sc_nmi_irq_init(struct device_node *node,
>>
>> domain = irq_domain_add_linear(node, 1, &irq_generic_chip_ops, NULL);
>> if (!domain) {
>> - pr_err("%s: Could not register interrupt domain.\n", node->name);
>> + pr_err("%s: Could not register interrupt domain.\n", DRV_NAME);
>> return -ENOMEM;
>> }
>>
>> - ret = irq_alloc_domain_generic_chips(domain, 1, 2, node->name,
>> + ret = irq_alloc_domain_generic_chips(domain, 1, 2, DRV_NAME,
>> handle_fasteoi_irq, clr, 0,
>> IRQ_GC_INIT_MASK_CACHE);
>> if (ret) {
>> pr_err("%s: Could not allocate generic interrupt chip.\n",
>> - node->name);
>> + DRV_NAME);
>> goto fail_irqd_remove;
>> }
>>
>> irq = irq_of_parse_and_map(node, 0);
>> if (irq <= 0) {
>> - pr_err("%s: unable to parse irq\n", node->name);
>> + pr_err("%s: unable to parse irq\n", DRV_NAME);
>> ret = -EINVAL;
>> goto fail_irqd_remove;
>> }
>> @@ -153,7 +154,7 @@ static int __init sunxi_sc_nmi_irq_init(struct device_node *node,
>> gc = irq_get_domain_generic_chip(domain, 0);
>> gc->reg_base = of_iomap(node, 0);
>> if (!gc->reg_base) {
>> - pr_err("%s: unable to map resource\n", node->name);
>> + pr_err("%s: unable to map resource\n", DRV_NAME);
>
> All the pr_err changes can even be replaced by defining pr_fmt.
Cool. Learned something today.
ChenYu
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web