Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1237385 > unrolled thread

[PATCH v3 3/6] arm64: GICv3: Specialize readq and writeq accesses

Started byJean-Philippe Brucker <jean-philippe.brucker@arm.com>
First post2015-10-01 14:50 +0200
Last post2015-10-01 14:50 +0200
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH v3 3/6] arm64: GICv3: Specialize readq and writeq accesses Jean-Philippe Brucker <jean-philippe.brucker@arm.com> - 2015-10-01 14:50 +0200

#1237385 — [PATCH v3 3/6] arm64: GICv3: Specialize readq and writeq accesses

FromJean-Philippe Brucker <jean-philippe.brucker@arm.com>
Date2015-10-01 14:50 +0200
Subject[PATCH v3 3/6] arm64: GICv3: Specialize readq and writeq accesses
Message-ID<qeLt7-4i7-1@gated-at.bofh.it>
On 32bit platforms, we cannot assure that an I/O ldrd or strd will be
done atomically. Besides, an hypervisor would be unable to emulate such
accesses.
In order to allow the AArch32 version of the driver to split them into
two 32bit accesses while keeping the requirement for atomic writes, this
patch specializes the IROUTER and TYPER accesses.
Since the latter is an ID register, it won't need to be read atomically,
but we still avoid future confusion by using gic_read_typer instead of a
generic gic_readq.

Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
---
 arch/arm64/include/asm/arch_gicv3.h |    3 +++
 drivers/irqchip/irq-gic-v3.c        |    6 +++---
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index bd8f005..8e602e1 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -141,5 +141,8 @@ static inline void gic_write_sre(u32 val)
 	isb();
 }
 
+#define gic_read_typer(c)		readq_relaxed(c)
+#define gic_write_irouter(v, c)		writeq_relaxed(v, c)
+
 #endif /* __ASSEMBLY__ */
 #endif /* __ASM_ARCH_GICV3_H */
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 0fb8d6d..30ecaf5 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -400,7 +400,7 @@ static void __init gic_dist_init(void)
 	 */
 	affinity = gic_mpidr_to_affinity(cpu_logical_map(smp_processor_id()));
 	for (i = 32; i < gic_data.irq_nr; i++)
-		writeq_relaxed(affinity, base + GICD_IROUTER + i * 8);
+		gic_write_irouter(affinity, base + GICD_IROUTER + i * 8);
 }
 
 static int gic_populate_rdist(void)
@@ -431,7 +431,7 @@ static int gic_populate_rdist(void)
 		}
 
 		do {
-			typer = readq_relaxed(ptr + GICR_TYPER);
+			typer = gic_read_typer(ptr + GICR_TYPER);
 			if ((typer >> 32) == aff) {
 				u64 offset = ptr - gic_data.redist_regions[i].redist_base;
 				gic_data_rdist_rd_base() = ptr;
@@ -624,7 +624,7 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
 	reg = gic_dist_base(d) + GICD_IROUTER + (gic_irq(d) * 8);
 	val = gic_mpidr_to_affinity(cpu_logical_map(cpu));
 
-	writeq_relaxed(val, reg);
+	gic_write_irouter(val, reg);
 
 	/*
 	 * If the interrupt was enabled, enabled it again. Otherwise,
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web