Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1227965 > unrolled thread

[PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms

Back to article view | Back to linux.kernel

Contents

  [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
    [PATCH v3 25/27] ARM: dts: am335x: Provide NAND ready pin Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
    [PATCH v3 15/27] memory: omap-gpmc: Support general purpose input for WAITPINs Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
    [PATCH v3 26/27] ARM: dts: dm816x: Fix gpmc and NAND node Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
    [PATCH v3 22/27] ARM: dts: am437x: Fix NAND device nodes Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
    [PATCH v3 10/27] mtd: nand: omap: Copy platform data parameters to omap_nand_info data Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
    [PATCH v3 20/27] ARM: dts: dra7: Fix NAND device nodes. Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
    [PATCH v3 19/27] memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
    [PATCH v3 13/27] memory: omap-gpmc: Prevent mapping into 1st 16MB Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
    [PATCH v3 18/27] mtd: nand: omap2: Implement NAND ready using gpiolib Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
    [PATCH v3 21/27] ARM: dts: dra7x-evm: Provide NAND ready pin Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
    [PATCH v3 11/27] mtd: nand: omap: Clean up device tree support Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
    [PATCH v3 05/27] memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
    [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
    [PATCH v3 14/27] memory: omap-gpmc: Move device tree binding to correct location Roger Quadros <rogerq@ti.com> - 2015-09-18 17:10 +0200
    [PATCH v3 17/27] memory: omap-gpmc: Add irqchip support to the gpiochip Roger Quadros <rogerq@ti.com> - 2015-09-18 17:10 +0200
    [PATCH v3 09/27] mtd: nand: omap2: manage NAND interrupts Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200
    [PATCH v3 12/27] mtd: nand: omap: Update DT binding documentation Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200
    [PATCH v3 07/27] memory: omap-gpmc: Remove NAND IRQ code Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200
    [PATCH v3 16/27] memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200
    [PATCH v3 04/27] mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
    [PATCH v3 08/27] memory: omap-gpmc: Add IRQ ops for GPMC-NAND interface Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
    [PATCH v3 02/27] ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
    [PATCH v3 01/27] ARM: OMAP2+: gpmc: Add platform data Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
    [PATCH v3 03/27] memory: omap-gpmc: Introduce GPMC to NAND interface Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
    [PATCH v3 06/27] mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200

Page 2 of 2 — ← Prev page 1 [2]

#1228056 — [PATCH v3 04/27] mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers

Deprecate nand register passing via platform data and use
gpmc_omap_get_nand_ops() instead.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/mach-omap2/gpmc-nand.c              | 2 --
 drivers/mtd/nand/omap2.c                     | 9 ++++++++-
 include/linux/platform_data/mtd-nand-omap2.h | 4 +++-
 3 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 72918c4..04e6998 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -121,8 +121,6 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
 	if (err < 0)
 		goto out_free_cs;
 
-	gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
-
 	if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) {
 		pr_err("omap2-nand: Unsupported NAND ECC scheme selected\n");
 		err = -EINVAL;
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 60fa899..f214fe2 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -28,6 +28,7 @@
 #include <linux/mtd/nand_bch.h>
 #include <linux/platform_data/elm.h>
 
+#include <linux/omap-gpmc.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 
 #define	DRIVER_NAME	"omap2-nand"
@@ -169,7 +170,9 @@ struct omap_nand_info {
 	} iomode;
 	u_char				*buf;
 	int					buf_len;
+	/* Interface to GPMC */
 	struct gpmc_nand_regs		reg;
+	struct gpmc_nand_ops		*ops;
 	/* generated at runtime depending on ECC algorithm and layout selected */
 	struct nand_ecclayout		oobinfo;
 	/* fields specific for BCHx_HW ECC scheme */
@@ -1677,9 +1680,13 @@ static int omap_nand_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, info);
 
+	info->ops = gpmc_omap_get_nand_ops(&info->reg, info->gpmc_cs);
+	if (!info->ops) {
+		dev_err(&pdev->dev, "Failed to get GPMC->NAND interface\n");
+		return -ENODEV;
+	}
 	info->pdev		= pdev;
 	info->gpmc_cs		= pdata->cs;
-	info->reg		= pdata->reg;
 	info->of_node		= pdata->of_node;
 	info->ecc_opt		= pdata->ecc_opt;
 	mtd			= &info->mtd;
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 090bbab..a067f58 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -75,10 +75,12 @@ struct omap_nand_platform_data {
 	enum nand_io		xfer_type;
 	int			devsize;
 	enum omap_ecc           ecc_opt;
-	struct gpmc_nand_regs	reg;
 
 	/* for passing the partitions */
 	struct device_node	*of_node;
 	struct device_node	*elm_of_node;
+
+	/* deprecated */
+	struct gpmc_nand_regs	reg;
 };
 #endif
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1228057 — [PATCH v3 08/27] memory: omap-gpmc: Add IRQ ops for GPMC-NAND interface

Provide functions to enable/disable NAND IRQs, get
NAND event status and clear NAND events.

The NAND events of interest are TERMCOUNT and FIFOEVENT.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/memory/omap-gpmc.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/omap-gpmc.h  |  4 ++++
 2 files changed, 54 insertions(+)

diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index a9071bb..e75226d 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -1078,8 +1078,58 @@ static bool gpmc_nand_writebuffer_empty(void)
 	return false;
 }
 
+static int gpmc_nand_irq_enable(enum gpmc_nand_irq irq)
+{
+	u32 reg;
+
+	if (irq > GPMC_NAND_IRQ_TERMCOUNT)
+		return -EINVAL;
+
+	reg = gpmc_read_reg(GPMC_IRQENABLE);
+	reg |= BIT(irq);
+	gpmc_write_reg(GPMC_IRQENABLE, reg);
+
+	return 0;
+}
+
+static int gpmc_nand_irq_disable(enum gpmc_nand_irq irq)
+{
+	u32 reg;
+
+	if (irq > GPMC_NAND_IRQ_TERMCOUNT)
+		return -EINVAL;
+
+	reg = gpmc_read_reg(GPMC_IRQENABLE);
+	reg &= ~BIT(irq);
+	gpmc_write_reg(GPMC_IRQENABLE, reg);
+
+	return 0;
+}
+
+static void gpmc_nand_irq_clear(enum gpmc_nand_irq irq)
+{
+	if (irq > GPMC_NAND_IRQ_TERMCOUNT)
+		return;
+
+	/* setting bit to 1 clears the bit in IRQSTATUS */
+	gpmc_write_reg(GPMC_IRQSTATUS, BIT(irq));
+}
+
+static u32 gpmc_nand_irq_status(void)
+{
+	u32 reg = gpmc_read_reg(GPMC_IRQSTATUS);
+
+	/* Mask out non-NAND bits */
+	reg &= GPMC_IRQENABLE_FIFOEVENT | GPMC_IRQENABLE_TERMCOUNT;
+	return reg;
+}
+
 static struct gpmc_nand_ops nand_ops = {
 	.nand_writebuffer_empty = gpmc_nand_writebuffer_empty,
+	.nand_irq_enable = gpmc_nand_irq_enable,
+	.nand_irq_disable = gpmc_nand_irq_disable,
+	.nand_irq_clear = gpmc_nand_irq_clear,
+	.nand_irq_status = gpmc_nand_irq_status,
 };
 
 /**
diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h
index 58f6bd2..b76cec3 100644
--- a/include/linux/omap-gpmc.h
+++ b/include/linux/omap-gpmc.h
@@ -11,6 +11,10 @@
 
 #define GPMC_CONFIG_WP		0x00000005
 
+/* GPMC IRQENABLE/IRQSTATUS BIT defs */
+#define GPMC_IRQENABLE_FIFOEVENT	BIT(0)
+#define GPMC_IRQENABLE_TERMCOUNT	BIT(1)
+
 enum gpmc_nand_irq {
 	GPMC_NAND_IRQ_FIFOEVENT = 0,
 	GPMC_NAND_IRQ_TERMCOUNT,
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1228058 — [PATCH v3 02/27] ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data

Add device_timings, gpmc_timings and gpmc_setting to
gpmc platform data.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 include/linux/omap-gpmc.h               | 134 -------------------------------
 include/linux/platform_data/gpmc-omap.h | 137 ++++++++++++++++++++++++++++++++
 2 files changed, 137 insertions(+), 134 deletions(-)

diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h
index 5c79190..2dcef1c 100644
--- a/include/linux/omap-gpmc.h
+++ b/include/linux/omap-gpmc.h
@@ -14,140 +14,6 @@
 #define GPMC_IRQ_FIFOEVENTENABLE	0x01
 #define GPMC_IRQ_COUNT_EVENT		0x02
 
-#define GPMC_BURST_4			4	/* 4 word burst */
-#define GPMC_BURST_8			8	/* 8 word burst */
-#define GPMC_BURST_16			16	/* 16 word burst */
-#define GPMC_DEVWIDTH_8BIT		1	/* 8-bit device width */
-#define GPMC_DEVWIDTH_16BIT		2	/* 16-bit device width */
-#define GPMC_MUX_AAD			1	/* Addr-Addr-Data multiplex */
-#define GPMC_MUX_AD			2	/* Addr-Data multiplex */
-
-/* bool type time settings */
-struct gpmc_bool_timings {
-	bool cycle2cyclediffcsen;
-	bool cycle2cyclesamecsen;
-	bool we_extra_delay;
-	bool oe_extra_delay;
-	bool adv_extra_delay;
-	bool cs_extra_delay;
-	bool time_para_granularity;
-};
-
-/*
- * Note that all values in this struct are in nanoseconds except sync_clk
- * (which is in picoseconds), while the register values are in gpmc_fck cycles.
- */
-struct gpmc_timings {
-	/* Minimum clock period for synchronous mode (in picoseconds) */
-	u32 sync_clk;
-
-	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
-	u32 cs_on;		/* Assertion time */
-	u32 cs_rd_off;		/* Read deassertion time */
-	u32 cs_wr_off;		/* Write deassertion time */
-
-	/* ADV signal timings corresponding to GPMC_CONFIG3 */
-	u32 adv_on;		/* Assertion time */
-	u32 adv_rd_off;		/* Read deassertion time */
-	u32 adv_wr_off;		/* Write deassertion time */
-
-	/* WE signals timings corresponding to GPMC_CONFIG4 */
-	u32 we_on;		/* WE assertion time */
-	u32 we_off;		/* WE deassertion time */
-
-	/* OE signals timings corresponding to GPMC_CONFIG4 */
-	u32 oe_on;		/* OE assertion time */
-	u32 oe_off;		/* OE deassertion time */
-
-	/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
-	u32 page_burst_access;	/* Multiple access word delay */
-	u32 access;		/* Start-cycle to first data valid delay */
-	u32 rd_cycle;		/* Total read cycle time */
-	u32 wr_cycle;		/* Total write cycle time */
-
-	u32 bus_turnaround;
-	u32 cycle2cycle_delay;
-
-	u32 wait_monitoring;
-	u32 clk_activation;
-
-	/* The following are only on OMAP3430 */
-	u32 wr_access;		/* WRACCESSTIME */
-	u32 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
-
-	struct gpmc_bool_timings bool_timings;
-};
-
-/* Device timings in picoseconds */
-struct gpmc_device_timings {
-	u32 t_ceasu;	/* address setup to CS valid */
-	u32 t_avdasu;	/* address setup to ADV valid */
-	/* XXX: try to combine t_avdp_r & t_avdp_w. Issue is
-	 * of tusb using these timings even for sync whilst
-	 * ideally for adv_rd/(wr)_off it should have considered
-	 * t_avdh instead. This indirectly necessitates r/w
-	 * variations of t_avdp as it is possible to have one
-	 * sync & other async
-	 */
-	u32 t_avdp_r;	/* ADV low time (what about t_cer ?) */
-	u32 t_avdp_w;
-	u32 t_aavdh;	/* address hold time */
-	u32 t_oeasu;	/* address setup to OE valid */
-	u32 t_aa;	/* access time from ADV assertion */
-	u32 t_iaa;	/* initial access time */
-	u32 t_oe;	/* access time from OE assertion */
-	u32 t_ce;	/* access time from CS asertion */
-	u32 t_rd_cycle;	/* read cycle time */
-	u32 t_cez_r;	/* read CS deassertion to high Z */
-	u32 t_cez_w;	/* write CS deassertion to high Z */
-	u32 t_oez;	/* OE deassertion to high Z */
-	u32 t_weasu;	/* address setup to WE valid */
-	u32 t_wpl;	/* write assertion time */
-	u32 t_wph;	/* write deassertion time */
-	u32 t_wr_cycle;	/* write cycle time */
-
-	u32 clk;
-	u32 t_bacc;	/* burst access valid clock to output delay */
-	u32 t_ces;	/* CS setup time to clk */
-	u32 t_avds;	/* ADV setup time to clk */
-	u32 t_avdh;	/* ADV hold time from clk */
-	u32 t_ach;	/* address hold time from clk */
-	u32 t_rdyo;	/* clk to ready valid */
-
-	u32 t_ce_rdyz;	/* XXX: description ?, or use t_cez instead */
-	u32 t_ce_avd;	/* CS on to ADV on delay */
-
-	/* XXX: check the possibility of combining
-	 * cyc_aavhd_oe & cyc_aavdh_we
-	 */
-	u8 cyc_aavdh_oe;/* read address hold time in cycles */
-	u8 cyc_aavdh_we;/* write address hold time in cycles */
-	u8 cyc_oe;	/* access time from OE assertion in cycles */
-	u8 cyc_wpl;	/* write deassertion time in cycles */
-	u32 cyc_iaa;	/* initial access time in cycles */
-
-	/* extra delays */
-	bool ce_xdelay;
-	bool avd_xdelay;
-	bool oe_xdelay;
-	bool we_xdelay;
-};
-
-struct gpmc_settings {
-	bool burst_wrap;	/* enables wrap bursting */
-	bool burst_read;	/* enables read page/burst mode */
-	bool burst_write;	/* enables write page/burst mode */
-	bool device_nand;	/* device is NAND */
-	bool sync_read;		/* enables synchronous reads */
-	bool sync_write;	/* enables synchronous writes */
-	bool wait_on_read;	/* monitor wait on reads */
-	bool wait_on_write;	/* monitor wait on writes */
-	u32 burst_len;		/* page/burst length */
-	u32 device_width;	/* device bus width (8 or 16 bit) */
-	u32 mux_add_data;	/* multiplex address & data */
-	u32 wait_pin;		/* wait-pin to be used */
-};
-
 extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
 			     struct gpmc_settings *gpmc_s,
 			     struct gpmc_device_timings *dev_t);
diff --git a/include/linux/platform_data/gpmc-omap.h b/include/linux/platform_data/gpmc-omap.h
index d32d9de..4461fa8 100644
--- a/include/linux/platform_data/gpmc-omap.h
+++ b/include/linux/platform_data/gpmc-omap.h
@@ -15,10 +15,147 @@
 /* Maximum Number of Chip Selects */
 #define GPMC_CS_NUM		8
 
+/* bool type time settings */
+struct gpmc_bool_timings {
+	bool cycle2cyclediffcsen;
+	bool cycle2cyclesamecsen;
+	bool we_extra_delay;
+	bool oe_extra_delay;
+	bool adv_extra_delay;
+	bool cs_extra_delay;
+	bool time_para_granularity;
+};
+
+/*
+ * Note that all values in this struct are in nanoseconds except sync_clk
+ * (which is in picoseconds), while the register values are in gpmc_fck cycles.
+ */
+struct gpmc_timings {
+	/* Minimum clock period for synchronous mode (in picoseconds) */
+	u32 sync_clk;
+
+	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
+	u32 cs_on;		/* Assertion time */
+	u32 cs_rd_off;		/* Read deassertion time */
+	u32 cs_wr_off;		/* Write deassertion time */
+
+	/* ADV signal timings corresponding to GPMC_CONFIG3 */
+	u32 adv_on;		/* Assertion time */
+	u32 adv_rd_off;		/* Read deassertion time */
+	u32 adv_wr_off;		/* Write deassertion time */
+
+	/* WE signals timings corresponding to GPMC_CONFIG4 */
+	u32 we_on;		/* WE assertion time */
+	u32 we_off;		/* WE deassertion time */
+
+	/* OE signals timings corresponding to GPMC_CONFIG4 */
+	u32 oe_on;		/* OE assertion time */
+	u32 oe_off;		/* OE deassertion time */
+
+	/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
+	u32 page_burst_access;	/* Multiple access word delay */
+	u32 access;		/* Start-cycle to first data valid delay */
+	u32 rd_cycle;		/* Total read cycle time */
+	u32 wr_cycle;		/* Total write cycle time */
+
+	u32 bus_turnaround;
+	u32 cycle2cycle_delay;
+
+	u32 wait_monitoring;
+	u32 clk_activation;
+
+	/* The following are only on OMAP3430 */
+	u32 wr_access;		/* WRACCESSTIME */
+	u32 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
+
+	struct gpmc_bool_timings bool_timings;
+};
+
+/* Device timings in picoseconds */
+struct gpmc_device_timings {
+	u32 t_ceasu;	/* address setup to CS valid */
+	u32 t_avdasu;	/* address setup to ADV valid */
+	/* XXX: try to combine t_avdp_r & t_avdp_w. Issue is
+	 * of tusb using these timings even for sync whilst
+	 * ideally for adv_rd/(wr)_off it should have considered
+	 * t_avdh instead. This indirectly necessitates r/w
+	 * variations of t_avdp as it is possible to have one
+	 * sync & other async
+	 */
+	u32 t_avdp_r;	/* ADV low time (what about t_cer ?) */
+	u32 t_avdp_w;
+	u32 t_aavdh;	/* address hold time */
+	u32 t_oeasu;	/* address setup to OE valid */
+	u32 t_aa;	/* access time from ADV assertion */
+	u32 t_iaa;	/* initial access time */
+	u32 t_oe;	/* access time from OE assertion */
+	u32 t_ce;	/* access time from CS asertion */
+	u32 t_rd_cycle;	/* read cycle time */
+	u32 t_cez_r;	/* read CS deassertion to high Z */
+	u32 t_cez_w;	/* write CS deassertion to high Z */
+	u32 t_oez;	/* OE deassertion to high Z */
+	u32 t_weasu;	/* address setup to WE valid */
+	u32 t_wpl;	/* write assertion time */
+	u32 t_wph;	/* write deassertion time */
+	u32 t_wr_cycle;	/* write cycle time */
+
+	u32 clk;
+	u32 t_bacc;	/* burst access valid clock to output delay */
+	u32 t_ces;	/* CS setup time to clk */
+	u32 t_avds;	/* ADV setup time to clk */
+	u32 t_avdh;	/* ADV hold time from clk */
+	u32 t_ach;	/* address hold time from clk */
+	u32 t_rdyo;	/* clk to ready valid */
+
+	u32 t_ce_rdyz;	/* XXX: description ?, or use t_cez instead */
+	u32 t_ce_avd;	/* CS on to ADV on delay */
+
+	/* XXX: check the possibility of combining
+	 * cyc_aavhd_oe & cyc_aavdh_we
+	 */
+	u8 cyc_aavdh_oe;/* read address hold time in cycles */
+	u8 cyc_aavdh_we;/* write address hold time in cycles */
+	u8 cyc_oe;	/* access time from OE assertion in cycles */
+	u8 cyc_wpl;	/* write deassertion time in cycles */
+	u32 cyc_iaa;	/* initial access time in cycles */
+
+	/* extra delays */
+	bool ce_xdelay;
+	bool avd_xdelay;
+	bool oe_xdelay;
+	bool we_xdelay;
+};
+
+#define GPMC_BURST_4			4	/* 4 word burst */
+#define GPMC_BURST_8			8	/* 8 word burst */
+#define GPMC_BURST_16			16	/* 16 word burst */
+#define GPMC_DEVWIDTH_8BIT		1	/* 8-bit device width */
+#define GPMC_DEVWIDTH_16BIT		2	/* 16-bit device width */
+#define GPMC_MUX_AAD			1	/* Addr-Addr-Data multiplex */
+#define GPMC_MUX_AD			2	/* Addr-Data multiplex */
+
+struct gpmc_settings {
+	bool burst_wrap;	/* enables wrap bursting */
+	bool burst_read;	/* enables read page/burst mode */
+	bool burst_write;	/* enables write page/burst mode */
+	bool device_nand;	/* device is NAND */
+	bool sync_read;		/* enables synchronous reads */
+	bool sync_write;	/* enables synchronous writes */
+	bool wait_on_read;	/* monitor wait on reads */
+	bool wait_on_write;	/* monitor wait on writes */
+	u32 burst_len;		/* page/burst length */
+	u32 device_width;	/* device bus width (8 or 16 bit) */
+	u32 mux_add_data;	/* multiplex address & data */
+	u32 wait_pin;		/* wait-pin to be used */
+};
+
 /* Data for each chip select */
 struct gpmc_omap_cs_data {
 	bool valid;			/* data is valid */
 	bool is_nand;			/* device within this CS is NAND */
+	struct gpmc_settings *settings;
+	struct gpmc_device_timings *device_timings;
+	struct gpmc_timings *gpmc_timings;
 	struct platform_device *pdev;	/* device within this CS region */
 	unsigned pdata_size;
 };
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1228060 — [PATCH v3 01/27] ARM: OMAP2+: gpmc: Add platform data

Add a platform data structure for GPMC. It contains all the necessary
platform information that needs to be passed from platform init code
to GPMC driver.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 include/linux/omap-gpmc.h               |  3 +--
 include/linux/platform_data/gpmc-omap.h | 30 ++++++++++++++++++++++++++++++
 2 files changed, 31 insertions(+), 2 deletions(-)
 create mode 100644 include/linux/platform_data/gpmc-omap.h

diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h
index 7dee0014..5c79190 100644
--- a/include/linux/omap-gpmc.h
+++ b/include/linux/omap-gpmc.h
@@ -7,8 +7,7 @@
  *  option) any later version.
  */
 
-/* Maximum Number of Chip Selects */
-#define GPMC_CS_NUM		8
+#include <linux/platform_data/gpmc-omap.h>
 
 #define GPMC_CONFIG_WP		0x00000005
 
diff --git a/include/linux/platform_data/gpmc-omap.h b/include/linux/platform_data/gpmc-omap.h
new file mode 100644
index 0000000..d32d9de
--- /dev/null
+++ b/include/linux/platform_data/gpmc-omap.h
@@ -0,0 +1,30 @@
+/*
+ * OMAP GPMC Platform data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc. - http://www.ti.com
+ *	Roger Quadros <rogerq@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#ifndef _GPMC_OMAP_H_
+#define _GPMC_OMAP_H_
+
+/* Maximum Number of Chip Selects */
+#define GPMC_CS_NUM		8
+
+/* Data for each chip select */
+struct gpmc_omap_cs_data {
+	bool valid;			/* data is valid */
+	bool is_nand;			/* device within this CS is NAND */
+	struct platform_device *pdev;	/* device within this CS region */
+	unsigned pdata_size;
+};
+
+struct gpmc_omap_platform_data {
+	struct gpmc_omap_cs_data cs[GPMC_CS_NUM];
+};
+
+#endif /* _GPMC_OMAP_H */
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1228062 — [PATCH v3 03/27] memory: omap-gpmc: Introduce GPMC to NAND interface

The OMAP GPMC module has certain registers dedicated for NAND
access and some NAND bits mixed with other GPMC functionality.

For the NAND dedicated registers we have the struct gpmc_nand_regs.

The NAND driver needs to access NAND specific bits from the
following non-dedicated registers
1) FIFOEVENT and TERMCOUNT from GPMC_IRQENABLE and GPMC_IRQSTATUS
2) EMPTYWRITEBUFFERSTATUS from GPMC_STATUS

For accessing these bits we introduce the struct gpmc_nand_ops.

Rename the gpmc_update_nand_reg() API to gpmc_omap_get_nand_ops()
and make it return the gpmc_nand_ops along with updating the
gpmc_nand_regs. This API will be called by the OMAP NAND driver
to access the necessary bits in GPMC register space.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/memory/omap-gpmc.c | 21 ++++++++++++++++++++
 include/linux/omap-gpmc.h  | 49 ++++++++++++++++++++++++++++++++++++++++++++--
 2 files changed, 68 insertions(+), 2 deletions(-)

diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index 32ac049..a80c53e 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -1099,6 +1099,27 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
 	}
 }
 
+static struct gpmc_nand_ops nand_ops;
+
+/**
+ * gpmc_omap_get_nand_ops - Get the GPMC NAND interface
+ * @regs: the GPMC NAND register map exclusive for NAND use.
+ * @cs: GPMC chip select number on which the NAND sits. The
+ *      register map returned will be specific to this chip select.
+ *
+ * Returns NULL on error e.g. invalid cs.
+ */
+struct gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *reg, int cs)
+{
+	if (cs >= gpmc_cs_num)
+		return NULL;
+
+	gpmc_update_nand_reg(reg, cs);
+
+	return &nand_ops;
+}
+EXPORT_SYMBOL_GPL(gpmc_omap_get_nand_ops);
+
 int gpmc_get_client_irq(unsigned irq_config)
 {
 	int i;
diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h
index 2dcef1c..7de9f9b 100644
--- a/include/linux/omap-gpmc.h
+++ b/include/linux/omap-gpmc.h
@@ -14,14 +14,59 @@
 #define GPMC_IRQ_FIFOEVENTENABLE	0x01
 #define GPMC_IRQ_COUNT_EVENT		0x02
 
+enum gpmc_nand_irq {
+	GPMC_NAND_IRQ_FIFOEVENT = 0,
+	GPMC_NAND_IRQ_TERMCOUNT,
+};
+
+/**
+ * gpmc_nand_ops - Interface between NAND and GPMC
+ * @nand_irq_enable: enable the requested GPMC NAND interrupt event.
+ * @nand_irq_disable: disable the requested GPMC NAND interrupt event.
+ * @nand_irq_clear: clears the GPMC NAND interrupt event status.
+ * @nand_irq_status: get the NAND interrupt event status.
+ * @nand_write_buffer_empty: get the NAND write buffer empty status.
+ */
+struct gpmc_nand_ops {
+	int (*nand_irq_enable)(enum gpmc_nand_irq irq);
+	int (*nand_irq_disable)(enum gpmc_nand_irq irq);
+	void (*nand_irq_clear)(enum gpmc_nand_irq irq);
+	u32 (*nand_irq_status)(void);
+	bool (*nand_writebuffer_empty)(void);
+};
+
+struct gpmc_nand_regs;
+
+#if IS_ENABLED(CONFIG_OMAP_GPMC)
+struct gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *regs,
+					     int cs);
+#else
+static inline gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *regs,
+						    int cs)
+{
+	return NULL;
+}
+#endif /* CONFIG_OMAP_GPMC */
+
+/*--------------------------------*/
+
+/* deprecated APIs */
+#if IS_ENABLED(CONFIG_OMAP_GPMC)
+void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
+#else
+static inline void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
+{
+	reg = NULL;
+}
+#endif /* CONFIG_OMAP_GPMC */
+/*--------------------------------*/
+
 extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
 			     struct gpmc_settings *gpmc_s,
 			     struct gpmc_device_timings *dev_t);
 
-struct gpmc_nand_regs;
 struct device_node;
 
-extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
 extern int gpmc_get_client_irq(unsigned irq_config);
 
 extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1228063 — [PATCH v3 06/27] mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check

Instead of accessing the gpmc_status register directly start
using the gpmc_nand_ops->nand_writebuffer_empty() helper
to check write buffer empty status.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/mtd/nand/omap2.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index f214fe2..0eb0b8c 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -289,14 +289,13 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
 	struct omap_nand_info *info = container_of(mtd,
 						struct omap_nand_info, mtd);
 	u_char *p = (u_char *)buf;
-	u32	status = 0;
+	bool status;
 
 	while (len--) {
 		iowrite8(*p++, info->nand.IO_ADDR_W);
 		/* wait until buffer is available for write */
 		do {
-			status = readl(info->reg.gpmc_status) &
-					STATUS_BUFF_EMPTY;
+			status = info->ops->nand_writebuffer_empty();
 		} while (!status);
 	}
 }
@@ -325,7 +324,7 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
 	struct omap_nand_info *info = container_of(mtd,
 						struct omap_nand_info, mtd);
 	u16 *p = (u16 *) buf;
-	u32	status = 0;
+	bool status;
 	/* FIXME try bursts of writesw() or DMA ... */
 	len >>= 1;
 
@@ -333,8 +332,7 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
 		iowrite16(*p++, info->nand.IO_ADDR_W);
 		/* wait until buffer is available for write */
 		do {
-			status = readl(info->reg.gpmc_status) &
-					STATUS_BUFF_EMPTY;
+			status = info->ops->nand_writebuffer_empty();
 		} while (!status);
 	}
 }
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]

Page 2 of 2 — ← Prev page 1 [2]

Back to top | Article view | linux.kernel

csiph-web