Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1329260 > unrolled thread

Re: [PATCH] tty: add Moxa Smartio MUE serial driver

Started byAndy Shevchenko <andy.shevchenko@gmail.com>
First post2016-02-08 17:20 +0100
Last post2016-02-08 17:20 +0100
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  Re: [PATCH] tty: add Moxa Smartio MUE serial driver Andy Shevchenko <andy.shevchenko@gmail.com> - 2016-02-08 17:20 +0100

#1329260 — Re: [PATCH] tty: add Moxa Smartio MUE serial driver

FromAndy Shevchenko <andy.shevchenko@gmail.com>
Date2016-02-08 17:20 +0100
SubjectRe: [PATCH] tty: add Moxa Smartio MUE serial driver
Message-ID<qZWHE-7Fq-37@gated-at.bofh.it>
On Mon, Feb 1, 2016 at 10:34 PM, Mathieu OTHACEHE <m.othacehe@gmail.com> wrote:
> Add a driver which supports:
>
> - CP-102E: 2 ports RS232 PCIE card
> - CP-102EL: 2 ports RS232 PCIE card
> - CP-132EL: 2 ports RS422/485 PCIE card
> - CP-114EL: 4 ports RS232/422/485 PCIE card
> - CP-104EL-A: 4 ports RS232 PCIE card
> - CP-168EL-A: 8 ports RS232 PCIE card
> - CP-118EL-A: 8 ports RS232/422/485 PCIE card
> - CP-118E-A: 8 ports RS422/485 PCIE card
> - CP-138E-A: 8 ports RS422/485 PCIE card
> - CP-134EL-A: 4 ports RS422/485 PCIE card
> - CP-116E-A (A): 8 ports RS232/422/485 PCIE card
> - CP-116E-A (B): 8 ports RS232/422/485 PCIE card
>
> This driver is based on 1.16.7 GPL MOXA driver written by Eric Lo
> and available on MOXA website. The original driver was based on
> Linux serial driver.
>
> Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com>
> ---
>
> Hi,
>
> Here is a new driver for MOXA Smartio MUE cards. It is based
> on the vendor driver available on MOXA website and on the
> mainline mxser driver.
>
> I was able to test it on a CP-168EL-A card on PC. Some of the
> cards (118E-A, 138E-A, 134EL-A, 116E-A-A et 116E-A-B) have
> a CPLD module programmable via GPIO.
> For now, I dropped all the code related to CPLD/GPIO because I
> can't test it on my card.
>
> Mathieu

I'm sorry, but it looks like 8250 based driver if I'm not mistaken. In
which case why not to use 8250_core.c / 8250_port.c and entire 8250/
infrastructure?

-- 
With Best Regards,
Andy Shevchenko

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web