Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1327468 > unrolled thread
| Started by | Rob Kramer <rob@solution-space.com> |
|---|---|
| First post | 2016-02-05 05:00 +0100 |
| Last post | 2016-02-08 15:00 +0100 |
| Articles | 7 — 2 participants |
Back to article view | Back to linux.kernel
[PATCH] watchdog: w83627hf: Added NCT6102D support. Rob Kramer <rob@solution-space.com> - 2016-02-05 05:00 +0100
Re: [PATCH] watchdog: w83627hf: Added NCT6102D support. Guenter Roeck <linux@roeck-us.net> - 2016-02-06 18:10 +0100
Re: [PATCH] watchdog: w83627hf: Added NCT6102D support. Guenter Roeck <linux@roeck-us.net> - 2016-02-06 18:20 +0100
Re: [PATCH] watchdog: w83627hf: Added NCT6102D support. Rob Kramer <rob@solution-space.com> - 2016-02-08 09:30 +0100
Re: [PATCH] watchdog: w83627hf: Added NCT6102D support. Guenter Roeck <linux@roeck-us.net> - 2016-02-08 15:20 +0100
[PATCH v2] watchdog: w83627hf: Added NCT6102D support. Rob Kramer <rob@solution-space.com> - 2016-02-08 12:20 +0100
Re: [PATCH v2] watchdog: w83627hf: Added NCT6102D support. Guenter Roeck <linux@roeck-us.net> - 2016-02-08 15:00 +0100
| From | Rob Kramer <rob@solution-space.com> |
|---|---|
| Date | 2016-02-05 05:00 +0100 |
| Subject | [PATCH] watchdog: w83627hf: Added NCT6102D support. |
| Message-ID | <qYFIS-3fA-5@gated-at.bofh.it> |
As used in (and tested on) the ASRock IMB-150 board. Implementation is
identical to other NCT chips, just with different registers.
Signed-off-by: Rob Kramer <rob@solution-space.com>
---
drivers/watchdog/Kconfig | 1 +
drivers/watchdog/w83627hf_wdt.c | 22 +++++++++++++++++++---
2 files changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 4f0e7be..318d8bc 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1140,6 +1140,7 @@ config W83627HF_WDT
NCT6779
NCT6791
NCT6792
+ NCT6102D/04D/06D
This watchdog simply watches your kernel to make sure it doesn't
freeze, and if it does, it reboots your computer after a certain
diff --git a/drivers/watchdog/w83627hf_wdt.c
b/drivers/watchdog/w83627hf_wdt.c
index cab14bc..09e8003 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -45,10 +45,11 @@
static int wdt_io;
static int cr_wdt_timeout; /* WDT timeout register */
static int cr_wdt_control; /* WDT control register */
+static int cr_wdt_csr; /* WDT control & status register */
enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg,
w83627dhg_p,
- w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792 };
+ w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792,
nct6102 };
static int timeout; /* in seconds */
module_param(timeout, int, 0);
@@ -92,15 +93,21 @@ MODULE_PARM_DESC(early_disable, "Disable watchdog at
boot time (default=0)");
#define W83667HG_B_ID 0xb3
#define NCT6775_ID 0xb4
#define NCT6776_ID 0xc3
+#define NCT6102_ID 0xc4
#define NCT6779_ID 0xc5
#define NCT6791_ID 0xc8
#define NCT6792_ID 0xc9
#define W83627HF_WDT_TIMEOUT 0xf6
#define W83697HF_WDT_TIMEOUT 0xf4
+#define NCT6102D_WDT_TIMEOUT 0xf1
#define W83627HF_WDT_CONTROL 0xf5
#define W83697HF_WDT_CONTROL 0xf3
+#define NCT6102D_WDT_CONTROL 0xf0
+
+#define W836X7HF_WDT_CSR 0xf7
+#define NCT6102D_WDT_CSR 0xf2
static void superio_outb(int reg, int val)
{
@@ -197,6 +204,7 @@ static int w83627hf_init(struct watchdog_device
*wdog, enum chips chip)
case nct6779:
case nct6791:
case nct6792:
+ case nct6102:
/*
* These chips have a fixed WDTO# output pin (W83627UHG),
* or support more than one WDTO# output pin.
@@ -229,8 +237,8 @@ static int w83627hf_init(struct watchdog_device
*wdog, enum chips chip)
superio_outb(cr_wdt_control, t);
/* reset trigger, disable keyboard & mouse turning off watchdog */
- t = superio_inb(0xF7) & ~0xD0;
- superio_outb(0xF7, t);
+ t = superio_inb(cr_wdt_csr) & ~0xD0;
+ superio_outb(cr_wdt_csr, t);
superio_exit();
@@ -322,6 +330,7 @@ static int wdt_find(int addr)
cr_wdt_timeout = W83627HF_WDT_TIMEOUT;
cr_wdt_control = W83627HF_WDT_CONTROL;
+ cr_wdt_csr = W836X7HF_WDT_CSR;
ret = superio_enter();
if (ret)
@@ -387,6 +396,12 @@ static int wdt_find(int addr)
case NCT6792_ID:
ret = nct6792;
break;
+ case NCT6102_ID:
+ ret = nct6102;
+ cr_wdt_timeout = NCT6102D_WDT_TIMEOUT;
+ cr_wdt_control = NCT6102D_WDT_CONTROL;
+ cr_wdt_csr = NCT6102D_WDT_CSR;
+ break;
case 0xff:
ret = -ENODEV;
break;
@@ -422,6 +437,7 @@ static int __init wdt_init(void)
"NCT6779",
"NCT6791",
"NCT6792",
+ "NCT6102",
};
wdt_io = 0x2e;
--
2.6.2
[toc] | [next] | [standalone]
| From | Guenter Roeck <linux@roeck-us.net> |
|---|---|
| Date | 2016-02-06 18:10 +0100 |
| Message-ID | <qZewX-1VZ-7@gated-at.bofh.it> |
| In reply to | #1327468 |
On 02/04/2016 06:58 PM, Rob Kramer wrote:
> As used in (and tested on) the ASRock IMB-150 board. Implementation is
> identical to other NCT chips, just with different registers.
>
> Signed-off-by: Rob Kramer <rob@solution-space.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> drivers/watchdog/Kconfig | 1 +
> drivers/watchdog/w83627hf_wdt.c | 22 +++++++++++++++++++---
> 2 files changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 4f0e7be..318d8bc 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1140,6 +1140,7 @@ config W83627HF_WDT
> NCT6779
> NCT6791
> NCT6792
> + NCT6102D/04D/06D
>
> This watchdog simply watches your kernel to make sure it doesn't
> freeze, and if it does, it reboots your computer after a certain
> diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
> index cab14bc..09e8003 100644
> --- a/drivers/watchdog/w83627hf_wdt.c
> +++ b/drivers/watchdog/w83627hf_wdt.c
> @@ -45,10 +45,11 @@
> static int wdt_io;
> static int cr_wdt_timeout; /* WDT timeout register */
> static int cr_wdt_control; /* WDT control register */
> +static int cr_wdt_csr; /* WDT control & status register */
>
> enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
> w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
> - w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792 };
> + w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6102 };
>
> static int timeout; /* in seconds */
> module_param(timeout, int, 0);
> @@ -92,15 +93,21 @@ MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)");
> #define W83667HG_B_ID 0xb3
> #define NCT6775_ID 0xb4
> #define NCT6776_ID 0xc3
> +#define NCT6102_ID 0xc4
> #define NCT6779_ID 0xc5
> #define NCT6791_ID 0xc8
> #define NCT6792_ID 0xc9
>
> #define W83627HF_WDT_TIMEOUT 0xf6
> #define W83697HF_WDT_TIMEOUT 0xf4
> +#define NCT6102D_WDT_TIMEOUT 0xf1
>
> #define W83627HF_WDT_CONTROL 0xf5
> #define W83697HF_WDT_CONTROL 0xf3
> +#define NCT6102D_WDT_CONTROL 0xf0
> +
> +#define W836X7HF_WDT_CSR 0xf7
> +#define NCT6102D_WDT_CSR 0xf2
>
> static void superio_outb(int reg, int val)
> {
> @@ -197,6 +204,7 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
> case nct6779:
> case nct6791:
> case nct6792:
> + case nct6102:
> /*
> * These chips have a fixed WDTO# output pin (W83627UHG),
> * or support more than one WDTO# output pin.
> @@ -229,8 +237,8 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
> superio_outb(cr_wdt_control, t);
>
> /* reset trigger, disable keyboard & mouse turning off watchdog */
> - t = superio_inb(0xF7) & ~0xD0;
> - superio_outb(0xF7, t);
> + t = superio_inb(cr_wdt_csr) & ~0xD0;
> + superio_outb(cr_wdt_csr, t);
>
> superio_exit();
>
> @@ -322,6 +330,7 @@ static int wdt_find(int addr)
>
> cr_wdt_timeout = W83627HF_WDT_TIMEOUT;
> cr_wdt_control = W83627HF_WDT_CONTROL;
> + cr_wdt_csr = W836X7HF_WDT_CSR;
>
> ret = superio_enter();
> if (ret)
> @@ -387,6 +396,12 @@ static int wdt_find(int addr)
> case NCT6792_ID:
> ret = nct6792;
> break;
> + case NCT6102_ID:
> + ret = nct6102;
> + cr_wdt_timeout = NCT6102D_WDT_TIMEOUT;
> + cr_wdt_control = NCT6102D_WDT_CONTROL;
> + cr_wdt_csr = NCT6102D_WDT_CSR;
> + break;
> case 0xff:
> ret = -ENODEV;
> break;
> @@ -422,6 +437,7 @@ static int __init wdt_init(void)
> "NCT6779",
> "NCT6791",
> "NCT6792",
> + "NCT6102",
> };
>
> wdt_io = 0x2e;
[toc] | [prev] | [next] | [standalone]
| From | Guenter Roeck <linux@roeck-us.net> |
|---|---|
| Date | 2016-02-06 18:20 +0100 |
| Message-ID | <qZeGB-1ZW-5@gated-at.bofh.it> |
| In reply to | #1327468 |
On 02/04/2016 06:58 PM, Rob Kramer wrote:
> As used in (and tested on) the ASRock IMB-150 board. Implementation is
> identical to other NCT chips, just with different registers.
>
> Signed-off-by: Rob Kramer <rob@solution-space.com>
Rob,
your patch is whitespace damaged (tabs replaced with spaces) and can not be applied.
Please resend.
Thanks,
Guenter
> ---
> drivers/watchdog/Kconfig | 1 +
> drivers/watchdog/w83627hf_wdt.c | 22 +++++++++++++++++++---
> 2 files changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 4f0e7be..318d8bc 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1140,6 +1140,7 @@ config W83627HF_WDT
> NCT6779
> NCT6791
> NCT6792
> + NCT6102D/04D/06D
>
> This watchdog simply watches your kernel to make sure it doesn't
> freeze, and if it does, it reboots your computer after a certain
> diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
> index cab14bc..09e8003 100644
> --- a/drivers/watchdog/w83627hf_wdt.c
> +++ b/drivers/watchdog/w83627hf_wdt.c
> @@ -45,10 +45,11 @@
> static int wdt_io;
> static int cr_wdt_timeout; /* WDT timeout register */
> static int cr_wdt_control; /* WDT control register */
> +static int cr_wdt_csr; /* WDT control & status register */
>
> enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
> w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
> - w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792 };
> + w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6102 };
>
> static int timeout; /* in seconds */
> module_param(timeout, int, 0);
> @@ -92,15 +93,21 @@ MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)");
> #define W83667HG_B_ID 0xb3
> #define NCT6775_ID 0xb4
> #define NCT6776_ID 0xc3
> +#define NCT6102_ID 0xc4
> #define NCT6779_ID 0xc5
> #define NCT6791_ID 0xc8
> #define NCT6792_ID 0xc9
>
> #define W83627HF_WDT_TIMEOUT 0xf6
> #define W83697HF_WDT_TIMEOUT 0xf4
> +#define NCT6102D_WDT_TIMEOUT 0xf1
>
> #define W83627HF_WDT_CONTROL 0xf5
> #define W83697HF_WDT_CONTROL 0xf3
> +#define NCT6102D_WDT_CONTROL 0xf0
> +
> +#define W836X7HF_WDT_CSR 0xf7
> +#define NCT6102D_WDT_CSR 0xf2
>
> static void superio_outb(int reg, int val)
> {
> @@ -197,6 +204,7 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
> case nct6779:
> case nct6791:
> case nct6792:
> + case nct6102:
> /*
> * These chips have a fixed WDTO# output pin (W83627UHG),
> * or support more than one WDTO# output pin.
> @@ -229,8 +237,8 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
> superio_outb(cr_wdt_control, t);
>
> /* reset trigger, disable keyboard & mouse turning off watchdog */
> - t = superio_inb(0xF7) & ~0xD0;
> - superio_outb(0xF7, t);
> + t = superio_inb(cr_wdt_csr) & ~0xD0;
> + superio_outb(cr_wdt_csr, t);
>
> superio_exit();
>
> @@ -322,6 +330,7 @@ static int wdt_find(int addr)
>
> cr_wdt_timeout = W83627HF_WDT_TIMEOUT;
> cr_wdt_control = W83627HF_WDT_CONTROL;
> + cr_wdt_csr = W836X7HF_WDT_CSR;
>
> ret = superio_enter();
> if (ret)
> @@ -387,6 +396,12 @@ static int wdt_find(int addr)
> case NCT6792_ID:
> ret = nct6792;
> break;
> + case NCT6102_ID:
> + ret = nct6102;
> + cr_wdt_timeout = NCT6102D_WDT_TIMEOUT;
> + cr_wdt_control = NCT6102D_WDT_CONTROL;
> + cr_wdt_csr = NCT6102D_WDT_CSR;
> + break;
> case 0xff:
> ret = -ENODEV;
> break;
> @@ -422,6 +437,7 @@ static int __init wdt_init(void)
> "NCT6779",
> "NCT6791",
> "NCT6792",
> + "NCT6102",
> };
>
> wdt_io = 0x2e;
[toc] | [prev] | [next] | [standalone]
| From | Rob Kramer <rob@solution-space.com> |
|---|---|
| Date | 2016-02-08 09:30 +0100 |
| Message-ID | <qZPmO-2Dm-5@gated-at.bofh.it> |
| In reply to | #1328339 |
On Sat, Feb 06, 2016 at 09:10:35AM -0800, Guenter Roeck wrote:
> your patch is whitespace damaged (tabs replaced with spaces) and can not be applied.
> Please resend.
Oops, you're right. I'll send it again shortly, from mutt instead of
Thunderbird (which apparently is problematic even with external editor).
Cheers,
Rob
[toc] | [prev] | [next] | [standalone]
| From | Guenter Roeck <linux@roeck-us.net> |
|---|---|
| Date | 2016-02-08 15:20 +0100 |
| Message-ID | <qZUPx-6rJ-27@gated-at.bofh.it> |
| In reply to | #1328818 |
On 02/07/2016 11:53 PM, Rob Kramer wrote: > On Sat, Feb 06, 2016 at 09:10:35AM -0800, Guenter Roeck wrote: >> your patch is whitespace damaged (tabs replaced with spaces) and can not be applied. >> Please resend. > > Oops, you're right. I'll send it again shortly, from mutt instead of > Thunderbird (which apparently is problematic even with external editor). > If you plan to send more patches in the future, you might consider using "git send-email". Thanks, Guenter
[toc] | [prev] | [next] | [standalone]
| From | Rob Kramer <rob@solution-space.com> |
|---|---|
| Date | 2016-02-08 12:20 +0100 |
| Subject | [PATCH v2] watchdog: w83627hf: Added NCT6102D support. |
| Message-ID | <qZS1k-4tX-9@gated-at.bofh.it> |
| In reply to | #1328339 |
As used in (and tested on) the ASRock IMB-150 board. Implementation is
identical to other NCT chips, just with different registers.
Signed-off-by: Rob Kramer <rob@solution-space.com>
---
drivers/watchdog/Kconfig | 1 +
drivers/watchdog/w83627hf_wdt.c | 22 +++++++++++++++++++---
2 files changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 4f0e7be..318d8bc 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1140,6 +1140,7 @@ config W83627HF_WDT
NCT6779
NCT6791
NCT6792
+ NCT6102D/04D/06D
This watchdog simply watches your kernel to make sure it doesn't
freeze, and if it does, it reboots your computer after a certain
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index cab14bc..09e8003 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -45,10 +45,11 @@
static int wdt_io;
static int cr_wdt_timeout; /* WDT timeout register */
static int cr_wdt_control; /* WDT control register */
+static int cr_wdt_csr; /* WDT control & status register */
enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
- w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792 };
+ w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6102 };
static int timeout; /* in seconds */
module_param(timeout, int, 0);
@@ -92,15 +93,21 @@ MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)");
#define W83667HG_B_ID 0xb3
#define NCT6775_ID 0xb4
#define NCT6776_ID 0xc3
+#define NCT6102_ID 0xc4
#define NCT6779_ID 0xc5
#define NCT6791_ID 0xc8
#define NCT6792_ID 0xc9
#define W83627HF_WDT_TIMEOUT 0xf6
#define W83697HF_WDT_TIMEOUT 0xf4
+#define NCT6102D_WDT_TIMEOUT 0xf1
#define W83627HF_WDT_CONTROL 0xf5
#define W83697HF_WDT_CONTROL 0xf3
+#define NCT6102D_WDT_CONTROL 0xf0
+
+#define W836X7HF_WDT_CSR 0xf7
+#define NCT6102D_WDT_CSR 0xf2
static void superio_outb(int reg, int val)
{
@@ -197,6 +204,7 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
case nct6779:
case nct6791:
case nct6792:
+ case nct6102:
/*
* These chips have a fixed WDTO# output pin (W83627UHG),
* or support more than one WDTO# output pin.
@@ -229,8 +237,8 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
superio_outb(cr_wdt_control, t);
/* reset trigger, disable keyboard & mouse turning off watchdog */
- t = superio_inb(0xF7) & ~0xD0;
- superio_outb(0xF7, t);
+ t = superio_inb(cr_wdt_csr) & ~0xD0;
+ superio_outb(cr_wdt_csr, t);
superio_exit();
@@ -322,6 +330,7 @@ static int wdt_find(int addr)
cr_wdt_timeout = W83627HF_WDT_TIMEOUT;
cr_wdt_control = W83627HF_WDT_CONTROL;
+ cr_wdt_csr = W836X7HF_WDT_CSR;
ret = superio_enter();
if (ret)
@@ -387,6 +396,12 @@ static int wdt_find(int addr)
case NCT6792_ID:
ret = nct6792;
break;
+ case NCT6102_ID:
+ ret = nct6102;
+ cr_wdt_timeout = NCT6102D_WDT_TIMEOUT;
+ cr_wdt_control = NCT6102D_WDT_CONTROL;
+ cr_wdt_csr = NCT6102D_WDT_CSR;
+ break;
case 0xff:
ret = -ENODEV;
break;
@@ -422,6 +437,7 @@ static int __init wdt_init(void)
"NCT6779",
"NCT6791",
"NCT6792",
+ "NCT6102",
};
wdt_io = 0x2e;
--
2.6.2
[toc] | [prev] | [next] | [standalone]
| From | Guenter Roeck <linux@roeck-us.net> |
|---|---|
| Date | 2016-02-08 15:00 +0100 |
| Subject | Re: [PATCH v2] watchdog: w83627hf: Added NCT6102D support. |
| Message-ID | <qZUwa-63L-21@gated-at.bofh.it> |
| In reply to | #1328934 |
On 02/08/2016 02:09 AM, Rob Kramer wrote:
> As used in (and tested on) the ASRock IMB-150 board. Implementation is
> identical to other NCT chips, just with different registers.
>
> Signed-off-by: Rob Kramer <rob@solution-space.com>
This time it applies.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Thanks,
Guenter
> ---
> drivers/watchdog/Kconfig | 1 +
> drivers/watchdog/w83627hf_wdt.c | 22 +++++++++++++++++++---
> 2 files changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 4f0e7be..318d8bc 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1140,6 +1140,7 @@ config W83627HF_WDT
> NCT6779
> NCT6791
> NCT6792
> + NCT6102D/04D/06D
>
> This watchdog simply watches your kernel to make sure it doesn't
> freeze, and if it does, it reboots your computer after a certain
> diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
> index cab14bc..09e8003 100644
> --- a/drivers/watchdog/w83627hf_wdt.c
> +++ b/drivers/watchdog/w83627hf_wdt.c
> @@ -45,10 +45,11 @@
> static int wdt_io;
> static int cr_wdt_timeout; /* WDT timeout register */
> static int cr_wdt_control; /* WDT control register */
> +static int cr_wdt_csr; /* WDT control & status register */
>
> enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
> w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
> - w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792 };
> + w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6102 };
>
> static int timeout; /* in seconds */
> module_param(timeout, int, 0);
> @@ -92,15 +93,21 @@ MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)");
> #define W83667HG_B_ID 0xb3
> #define NCT6775_ID 0xb4
> #define NCT6776_ID 0xc3
> +#define NCT6102_ID 0xc4
> #define NCT6779_ID 0xc5
> #define NCT6791_ID 0xc8
> #define NCT6792_ID 0xc9
>
> #define W83627HF_WDT_TIMEOUT 0xf6
> #define W83697HF_WDT_TIMEOUT 0xf4
> +#define NCT6102D_WDT_TIMEOUT 0xf1
>
> #define W83627HF_WDT_CONTROL 0xf5
> #define W83697HF_WDT_CONTROL 0xf3
> +#define NCT6102D_WDT_CONTROL 0xf0
> +
> +#define W836X7HF_WDT_CSR 0xf7
> +#define NCT6102D_WDT_CSR 0xf2
>
> static void superio_outb(int reg, int val)
> {
> @@ -197,6 +204,7 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
> case nct6779:
> case nct6791:
> case nct6792:
> + case nct6102:
> /*
> * These chips have a fixed WDTO# output pin (W83627UHG),
> * or support more than one WDTO# output pin.
> @@ -229,8 +237,8 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
> superio_outb(cr_wdt_control, t);
>
> /* reset trigger, disable keyboard & mouse turning off watchdog */
> - t = superio_inb(0xF7) & ~0xD0;
> - superio_outb(0xF7, t);
> + t = superio_inb(cr_wdt_csr) & ~0xD0;
> + superio_outb(cr_wdt_csr, t);
>
> superio_exit();
>
> @@ -322,6 +330,7 @@ static int wdt_find(int addr)
>
> cr_wdt_timeout = W83627HF_WDT_TIMEOUT;
> cr_wdt_control = W83627HF_WDT_CONTROL;
> + cr_wdt_csr = W836X7HF_WDT_CSR;
>
> ret = superio_enter();
> if (ret)
> @@ -387,6 +396,12 @@ static int wdt_find(int addr)
> case NCT6792_ID:
> ret = nct6792;
> break;
> + case NCT6102_ID:
> + ret = nct6102;
> + cr_wdt_timeout = NCT6102D_WDT_TIMEOUT;
> + cr_wdt_control = NCT6102D_WDT_CONTROL;
> + cr_wdt_csr = NCT6102D_WDT_CSR;
> + break;
> case 0xff:
> ret = -ENODEV;
> break;
> @@ -422,6 +437,7 @@ static int __init wdt_init(void)
> "NCT6779",
> "NCT6791",
> "NCT6792",
> + "NCT6102",
> };
>
> wdt_io = 0x2e;
>
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web