Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1325511 > unrolled thread
| Started by | Alexandre TORGUE <alexandre.torgue@gmail.com> |
|---|---|
| First post | 2016-02-03 16:00 +0100 |
| Last post | 2016-02-03 16:00 +0100 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH 2/4] Documentation: Bindings: Add STM32 DWMAC glue Alexandre TORGUE <alexandre.torgue@gmail.com> - 2016-02-03 16:00 +0100
| From | Alexandre TORGUE <alexandre.torgue@gmail.com> |
|---|---|
| Date | 2016-02-03 16:00 +0100 |
| Subject | [PATCH 2/4] Documentation: Bindings: Add STM32 DWMAC glue |
| Message-ID | <qY74u-3fA-7@gated-at.bofh.it> |
Signed-off-by: Alexandre TORGUE <alexandre.torgue@gmail.com>
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
new file mode 100644
index 0000000..18734b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
@@ -0,0 +1,41 @@
+STMicroelectronics STM32 / MCU DWMAC glue layer controller
+
+This file documents platform glue layer for stmmac.
+Please see stmmac.txt for the other unchanged properties.
+
+The device node has following properties.
+
+Required properties:
+- compatible: Should be "st,stm32-dwmac" to select glue, and
+ "snps,dwmac-3.50a" to select IP vesrion.
+- clocks: Should contain the GMAC main clock, and tx clock
+- compatible: Should be "st,stm32-dwmac" to select glue and
+ "snps,dwmac-3.50a" to select IP version.
+- clocks: Should contain the MAC main clock
+- clock-names: Should contain the clock names "stmmaceth".
+- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
+ encompases the glue register, and the offset of the control register.
+
+Optional properties:
+- clocks: Could contain:
+ - the tx clock,
+ - the rx clock
+- clock-names: Could contain the clock names "tx-clk", "rx-clk"
+
+Example:
+
+ ethernet0: dwmac@40028000 {
+ device_type = "network";
+ compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+ status = "disabled";
+ reg = <0x40028000 0x8000>;
+ reg-names = "stmmaceth";
+ interrupts = <0 61 0>, <0 62 0>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clock-names = "stmmaceth", "tx-clk", "rx-clk";
+ clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
+ st,syscon = <&syscfg 0x4>;
+ snps,pbl = <32>;
+ snps,mixed-burst;
+ dma-ranges;
+ };
--
1.9.1
Back to top | Article view | linux.kernel
csiph-web